.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Wheels

bear9-03y
£8.95 (£10.74 inc VAT)
Rear Wheel bearing Kit - BSA Bantam D5/D7/D10/D14 OEM: 90-0010
+

wash5884-C14
£2.95 (£3.54 inc VAT)
OEM: 65-5884, 37-2299, W2299
BSA Wheel Bearing Thrust Washer - A, B, C and M Group Models - QD Hubs - Circa 1947-70 Front/rear hub bearing thrust washers locates between the bearing...
+

bear025-F4
£9.95 (£11.94 inc VAT)
Ball Bearing RLS5 - 4203-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 40mm ID: 17mm Width: 16mm
+

bear9-27
£87.95 (£105.54 inc VAT)
Rear Wheel bearing Kit - Triumph 350/500cc, Unit T120/TR6 Triumph 350/500 Unit twins, Pre Unit Twins, Unit T120/TR6 all with Spool Hub, Quick detach. OEM:...
+

whrim41gg
£95.00 (£114.00 inc VAT)
Triumph Tiger Cub 200cc 18inch Rear Wheel Rim - Chrome or Stainless 18" Rim For Single side half width hub Quality British Chrome Rim, dimpled and...

sprock3741-talon
£49.95 (£59.94 inc VAT)
OEM: 37-3741, W3741
Triumph / BSA Rear Sprocket - Conical Hub Unit Singles - TR25W, B25/C25 and B50 Models - Circa 1971-73 52 tooth rear sprocket suitable for the models...
 

brk3804
£94.95 (£113.94 inc VAT)
OEM: 37-3804, W3804
Triumph / BSA Front Brake Shoes - 6" Conical Hub - TR5T, TR25W, B25, B50MX, B50T To fit the models listed with 6" conical hub - circa 1971-74. Shoe width:...
+

michtub17mg
£12.95 (£15.54 inc VAT)
Michelin Airstop Motorcycle Inner Tube 400 x 17, 460 x 17, 110/70 x 17, 110/80 x 17, 110/90 x 17, 120/70 x 17, 120/80 x 17, 120/60 x 17 17MG Michelin...
+

wheel5886-C14
£3.45 (£4.14 inc VAT)
OEM: 65-5886, 37-2301
BSA Wheel Hub Felt Washer - A, B and M Group + A65 and Unit Singles With QD Hub Locates between the inner and outer bearing retainers - correct fitment...
+

wheel5563-C14
£1.25 (£1.50 inc VAT)
OEM: 67-5563
BSA LH Front Wheel Bearing Rubber Oil Seal - Half Width Hub - Various Models From 1954 Onwards Left (near) side wheel bearing rubber washer as fitted to...
+

brake4397-C18
£7.95 (£9.54 inc VAT)
OEM: 60-4397, D4397, 3251-821
Brake Master Cylinder Reservoir - Triumph 650/750cc Twins and Triples + Norton Commando Lockheed type front/rear brake fluid tank as fitted to T120,...
+

fksprock422
£26.95 (£32.34 inc VAT)
OEM: 37-7064, W7064, 37-7016, W7016
Triumph TR7, T140 Rear Sprocket - Disc Brake Models from 1976 Onwards 47 tooth rear drive sprocket. Number of Teeth: 47 Chain Pitch: 5/8" x 3/8" - 530...
+

brake4374-C18
£1.45 (£1.74 inc VAT)
OEM: 60-4374, D4374, 3855/814
Brake Master Cylinder Body or Mounting Block to Reservoir O Ring - Triumph Disc Brake Models O ring seal - fits between the brake fluid tank and Lockheed...
+

wheel252-C14
£14.95 (£17.94 inc VAT)
OEM: 37-1690, 37-1691, W1690, W1691
Triumph Rear Brake Drum Nut & Bolt Set - 500/650cc Unit Twins From 1964-68 Set of 8 rear brake drum to hub securing bolts and self-locking nuts....
+

brake3880-C18
£3.95 (£4.74 inc VAT)
OEM: 37-3880, W3880
Triumph/BSA Rear Brake Lever Return Spring - Conical Hubs - 1971 Models Correct for 1971 Triumph 650cc models with conical rear hub +  TR25 models. Also...
+

wheel473-C9
£82.95 (£99.54 inc VAT)
OEM: 06-0289, 06-0292, 06-2067, 06-0324, 06-7738
Complete Norton Commando (1968-74) Rear Wheel Spindle set, manufactured in highly polished Stainless Steel. This premium quality spindle assembly includes...
+

screw8813-E12
£2.45 (£2.94 inc VAT)
OEM: 29-8813, 18/087, 02-0510, 60-0964, D964
Handlebar Lever Fulcrum Pivot Screw + BSA Brake Rod Linkage and Front Brake Cable to Arm Clutch and brake lever pivot screw as used with lugged handlebars...
+

wheel6101-C9
£15.95 (£19.14 inc VAT)
OEM: 66-6101
BSA M20 Rear Wheel Spindle - QD Hub with 3 Bolt Fixing - 1938-48 Overall Length: 10+1/2" (26.7cm) Diameter:  1/2" (12.6mm) x 20TPI Made in England - new...
+

wheel6161-C9
£48.95 (£58.74 inc VAT)
OEM: 67-6161
BSA A & B Group Rear Wheel Spindle - QD Hub Swinging Arm Models Main rear wheel spindle to fit A7, A10, B31, B33 swinging arm models. Overall...
+

spokegg45
£99.95 (£119.94 inc VAT)
OEM: 24-7012, 27-6813, 27-7012
Polished Stainless Steel Spoke and Nipple Set. Fits BSA C10, C11 models with single sided Front Hubs. Fitment: Front Hub Type: Single Sided Rim Size:...
+

michtub17mh
£14.95 (£17.94 inc VAT)
Michelin Airstop Motorcycle Inner Tube 130/70 x 17, 140/70 x 17, 130/80 x 17, 120/90 x 17 17MH Michelin Airstop Motorcycle Inner Tube Suitable for -...
+

whrim04gg
£135.00 (£162.00 inc VAT)
Triumph 5T, Speed Twin Pre-war, Front Wheel Rim 20" Rim, Highly polished Stainless Steel, dimpled and pierced, ready for assembly. Hub Type: Spool, Bolt on...

wheel114-C14
£4.95 (£5.94 inc VAT)
OEM: 21-2010, S2010, 70-1612, E1612
Triumph Rear Sprocket Mounting Bolts & Washers - 500/650/750cc Unit Twins Set of eight bolts and 'shakeproof' star washers to retain the rear...
+

av120-8018rr
£92.95 (£111.54 inc VAT)
120/80 x 18 Avon Road Rider MK2 AM26 62V Rear Use Width: 4.7" = 120mm Diameter: 25.7" = 652mm Depth: 7.5mm The RoadRider and RoadRunner work very well on...
+

brake4409
£5.45 (£6.54 inc VAT)
OEM: 60-4409, D4409, 9206-2050
Rear Brake Fluid Reservoir to Master Cylinder Hose - Triumph 750cc Twins and Triples Master cylinder delivery hose as fitted to T140, TR7, T150, T160...
+

wheel-1091-C14
£2.95 (£3.54 inc VAT)
OEM: 37-1091, W1091
Triumph QD Spline Rubber - Drum to Hub - 37-1091 Circular rubber seal that fits between the hub and drum on the Quick Detach wheels. Fits most Triumph and...
+

brake2764-C18
£2.95 (£3.54 inc VAT)
OEM: 99-2764
Bleed Nipple - Lockheed Brake Caliper - 99-2764 for Triumph T140/T150/T160 disc brake models fitted with lockheed cast iron caliper (1973-83) Front or...
+

wheel3337-C14
£4.45 (£5.34 inc VAT)
OEM: 37-3337, W3337, 37-3749, W3749
Triumph/BSA Front Hub Bearing Support Ring - TLS Brakes - Circa 1968-74 Correct fitment on full width hub twin leading shoe models: Triumph TR25W, T100,...
+

nut722M-C14
£11.95 (£14.34 inc VAT)
OEM: 37-2309
Rear Wheel Spindle Nut for BSA A50/A65 models. OEM: 37-2309
+

brake578-C18
£14.80 (£17.76 inc VAT)
OEM: 37-4263
Chrome plated lockheed caliper cover for Triumph T140/T150/T160 disc brake models fitted with lockheed cast iron caliper (1973-83) Front or Rear. OEM:...
+

fkbrk249-z
£15.95 (£19.14 inc VAT)
OEM: 19-7744
BSA Front Brake Shoes - B25, B50, A65 and A75 Models With 8" Conical Hub Correct fitment on B25, B50, A65 and A75 models with 8" conical hub circa 1971...
+

whrim209y
£95.00 (£114.00 inc VAT)
Norton Front and Rear Wheel Rim - Stainless Steel 19" Rim Highly polished Stainless Steel, dimpled and pierced, ready for assembly. Hub Type: Full Width...

fkweight60-C12
£0.99 (£1.19 inc VAT)
Wheel Balance Weights Self adhesive steel weights, lead-free. Priced per SINGLE strip . Comprises of 4 x 5g and 4 x 10g weights.
+

trim302-C10
£39.95 (£47.94 inc VAT)
OEM: 42-5844, 37-2211, W2211
BSA Chrome Wheel Trim/Hub Cover - 8" Full Width Hub Correct for BSA A10, A65 models, but may be suitable for other models. OD: 9" (23cm) ID: 2+1/4"...
 

nut316-C14
£3.95 (£4.74 inc VAT)
AJS/Matchless Wheel Nut in Chrome Thread: 5/8" - 20TPI
+

brake183-C18
£3.95 (£4.74 inc VAT)
OEM: 37-0200, 90-5716
BSA/Triumph Brake Shoe Return Spring - Bantam D7, D10, D14, B175 + Triumph T15, T20 Correct fitment on Bantam D7, D10, D14 and B175 models + Triumph...
+

21300trials
£36.55 (£43.86 inc VAT)
Universal 21" Motorcycle Tyre 300-21, 3.00 x 21 Trials type Suit Front, Speed rating 93mph. Tube type.
+

hub6101-C14
£54.95 (£65.94 inc VAT)
OEM: 67-6101, 42-6019, 37-2314, W2314
BSA Rear QD Splined Hub Driving Flange - A, B & M Group 1949-55 + A50/A65 Cast Iron Hub + Triumph TR25W Rear hub driving flange locates between the...
+

spkgg14
£99.95 (£119.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set. Ariel Heavyweight Singles and Twin models with 7" Single Side Front Brake. Fitment: Front Hub Type: 7"...
+

trim306-UK
£39.95 (£47.94 inc VAT)
OEM: 37-3443
7" Wheel Trim/Hub cover Twin leading Shoe (TLS) OD: 205mm ID: 54mm OEM: 37-3443, W3443 Made in England
+

18400-Mich-X11
£124.95 (£149.94 inc VAT)
18 inch - Michelin X11 Rear Trials Competition Tyre 400x18, 400-18, 4.00 x 18, 400R18 Suit Rear fitment only - Speed rating 64L = 74mph, 280kg. Tube or...
+

brake160-C18
£4.95 (£5.94 inc VAT)
OEM: 06-4243
Brake Caliper Service or Repair Kit - Norton OEM: 06-4243
+

b/rod-65-7007
£18.95 (£22.74 inc VAT)
OEM: 65-7007
BSA Rear Brake Rod - B Group from 1937-39 + M Group from 1937-62 Rigid frame M20 and M21 Models + early B Group models. Overall length including clevis:...
+

nut0585-C14
£2.95 (£3.54 inc VAT)
OEM: 21-0585, S585
Triumph Rear Wheel Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards Rear axle nut on later T100 and T120 models + 750cc triples from 1970...
+

whrim23gg-z
£95.00 (£114.00 inc VAT)
OEM: 29-5776
BSA C10, C11 Front Wheel Rim 19" - Quality Chrome or Stainless Steel 19" Rim - 40 hole High Quality Chrome or Stainless Steel, dimpled and pierced, ready...

disc7175R-C17
£58.95 (£70.74 inc VAT)
OEM: 37-7175, W7175, 37-4136, W4136, 37-4275, W4275
Triumph Drilled Brake Disc - 4 Hole - 750cc Disc Brake Models From 1973 Onwards Lightened cast iron front or rear disc s uitable for disc brake twins...
+

michtub18mgr
£18.95 (£22.74 inc VAT)
Michelin Airstop Motorcycle Inner Tube 400/410/460 x 18, 130/90-18, 120/90-18, 140/80-18 18MGR Michelin Airstop Motorcycle Inner Tube 4.00 x 18, 4.10 x 18,...
+

sprock6331-B10
£97.95 (£117.54 inc VAT)
OEM: 42-6331, 42-6333
42T Rear Brake Drum Sprocket - BSA A Group - Full Width Hub - Circa 1958-64 Suitable for A7 and A10 models from 1958-63 + A50 and A65 models from...
+

spokegg27
£99.95 (£119.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set. Fits Rear Wheel on Triumph 3TA/T21/T90, T100SS/T100R/T100C - (WM2 X 18) and Triumph T100C...
+

spoke033y
£99.95 (£119.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set. Ariel Heavyweight Singles and Twin models with Full Width Alloy Ariel type Hubs. Fitment: Front and Rear...
+

brake4585-C18
£4.95 (£5.94 inc VAT)
OEM: 82-4585, F4585, 82-6070, F6070
Triumph Brake Rod Adjusting Nut - 350/500/650cc Twins up to 1968 Torpedo type brake rod adjusting nut Overall length: 1+7/8" (47.5mm), CEI 1/4" x 26TPI...
+

wheel3759-C14
£9.95 (£11.94 inc VAT)
OEM: 37-3759, W3759
Triumph/BSA RH Front Wheel Bearing Lock Ring - Conical Hub - Various Models Circa 1971-74 Right (off) side wheel bearing retaining ring with left hand...
+

spokegg19
£99.95 (£119.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set. Fits Fits Nortons with Rear Cotton Reel - Equal flange sized Hub. also fited to some early Nortons on the...
+

brake3872-C18
£14.95 (£17.94 inc VAT)
OEM: 37-3872, W3872
Triumph/BSA Brake Shoe Cam - Rear Conical Hub - 250/500/650/750cc Models Circa 1971-74 Correct fitment on various models with rear conical hub including:...
+

whrim12gg
£95.00 (£114.00 inc VAT)
BSA Bantam D1, D3 Front Wheel Rim 19" - Quality Chrome or Stainless Steel 19" Rim - 36 hole High Quality Chrome or Stainless Steel, dimpled and pierced,...

wheel1052-C14
£3.95 (£4.74 inc VAT)
OEM: 37-1052, W1052
Triumph QD Rear Wheel Sleeve Spindle Nut - 500/650cc Models To suit various models with quick detach rear hubs. OEM: 37-1052, W1052
+

fk1710080
£42.95 (£51.54 inc VAT)
Budget 17" Motorcycle Tyre 100/80-17 Suit front or rear. Tubeless type. Can be used with a tube.
+

wheel6028-C14
£17.95 (£21.54 inc VAT)
OEM: 67-6028
BSA A & B Group Rear Hub Spindle Distance Sleeve - QD Hub Swinging Arm Models Fitted on the right hand side of the bike, located between the rear...
+

wheel1474-C14
£1.95 (£2.34 inc VAT)
OEM: 37-1474, W1474
Triumph Front / Rear Hub Grease Retaining Washer - Unit 350/500/650cc Models From 1964 Onwards Front and rear brake side grease retainer washer used on...
+

wheel4135-C14
£1.65 (£1.98 inc VAT)
OEM: 37-4135, W4135
Triumph Front Hub Bearing Grease Retaining Washer - T140, TR7, T150 and T160 Models Wheel bearing grease retaining shim/dust excluder, used on both...
+

whrim25gg
£95.00 (£114.00 inc VAT)
OEM: 29-5776
BSA C11G Front & Rear Wheel Rim 19" - Quality Chrome or Stainless Steel 19" Rim - 40 hole High Quality Chrome or Stainless Steel, dimpled and pierced,...

whrim38gg
£95.00 (£114.00 inc VAT)
Norton Front Wheel Rim 19" - 7" Front Brake Drum 19" Rim Highly polished Stainless Steel or Premium Chrome, dimpled and pierced, ready for assembly. Hub...

whrim218b
£95.00 (£114.00 inc VAT)
OEM: 37-270A
BSA A75 Rocket 3 Rear Wheel Rim 19" Rim Highly polished Stainless Steel or Chrome, dimpled and pierced, ready for assembly. Hub Type: Spool, Bolt on or...

bearLJ78-F4
£18.95 (£22.74 inc VAT)
OEM: 65-5883, 37-1041, 41-6016, 01-2542
Ball Bearing Wheel, Gearbox, Engine - Various Models Range of uses including: Wheel bearing, transmission and engine bearing Crankshaft D/S bearing...
+

bear9-22y
£10.95 (£13.14 inc VAT)
Front Wheel bearing Kit - Ariel Singles, Ariel Red Hunter, VH, KH, FH, Square Four Ariel singles (1946-61) with half width hub, HT3/HT5 Red Hunter 350cc...
+

spokegg66
£99.95 (£119.94 inc VAT)
Stainless Steel Spoke Set - Velocette Venom Polished Stainless Steel Spoke and Nipple Set. Fits Velocette Venom models with Full Width Hubs and 19" Rims....
+

spokegg53
£89.95 (£107.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set. Fits AJS, Matchless Front Wheel - 21" full width alloy hubs Fitment: Front Hub Type: Full Width Alloy Rim...
+

spokegg21y
£99.95 (£119.94 inc VAT)
Stainless Steel Spoke Set - Triumph Tiger Cub Polished Stainless Steel Spoke and Nipple Set. Fits Triumph Tiger Cub. T20 Fitment: Front and Rear Hub...
+

rubb060-C14
£1.75 (£2.10 inc VAT)
OEM: 06-2074
Norton 750/850cc Commando Mk2 and 2A rear wheel cush drive rubber (1971-74). Thick Type. Rear sprocket rubber, brake drum rubber, cush drive buffer. 3...
+

whrim228y
£95.00 (£114.00 inc VAT)
OEM: 42-5637
BSA B31, B33, A7, A10 Front & Rear Wheel Rim - Quality Chrome or Stainless Steel 19" Rim High Quality Chrome or Stainless Steel, dimpled and pierced,...

wheel5887-C14
£1.45 (£1.74 inc VAT)
OEM: 65-5887, 37-2302, W2303
BSA Rear Hub Bearing Retaining Washer - A, B and M Group + A65 and Unit Singles With QD Hub Locates between the bearing and the felt washer - correct...
+

wheel472-C9
£119.95 (£143.94 inc VAT)
OEM: 42-6320, 42-6077, 42-6325, 42-6330
BSA A & B Group (1958-) Rear Wheel Spindle set for Cast Iron Hubs, manufactured in highly polished Stainless Steel. This premium quality spindle...
+

fktub450-16
£8.45 (£10.14 inc VAT)
Motorcycle Inner Tube 450/510 x 16 For 16" tyres.
+

brake6038-C14
£2.95 (£3.54 inc VAT)
OEM: 67-6038
BSA Brake Drum Securing Bolt - QD Hub - A, B and M Group Circa 1947-55 Rear brake drum sprocket securing bolt as fitted to many BSA models with quick...
+

whrim51gg
£95.00 (£114.00 inc VAT)
BSA M20, M21, B31 etc 19" Rear Wheel Rim - Fixed Sprocket Hub - Chrome or Stainless 19" Rim - Suit the BSA M20 and M21 models with Spool Hub For Spool...

wheel4132-C9
£27.95 (£33.54 inc VAT)
OEM: 37-4132, W4132
Triumph Front Wheel Spindle - 650/750cc Disc Brake Models From 1973 Onwards Correct fitment on all T120V, T140, TR7, T150 and T160 disc brake models....
+

nipples-40
£25.95 (£31.14 inc VAT)
Nipple Set of 40 for Motorcycle Wheels Nickel Plated Brass Nipples. Set of 40 nipples. Please specify size required. Currently limited sizes available...

bear9-02x
£8.95 (£10.74 inc VAT)
Front Wheel bearing Kit - AJS Model 14 with British Hubs AJS Model 14 with British Hubs OEM: 90-9063
+

wheel442-C14
£2.45 (£2.94 inc VAT)
OEM: 014387, 01-4387
AJS/Matchless Rear Wheel Hub Oil Seal Ring Oil sealing ring for rear wheel bearings. OD: 1+3/8" (34.9mm) ID: 7/8" (22.2mm)...
+

46017kenda
£52.95 (£63.54 inc VAT)
Kenda 17" Motorcycle Tyre 460-17 Trials Dual Sport Suit Rear, Speed rating 93mph. Tube type. 61P - 460/17, 4.60 x 17 The K270 Dual Sport is great for...
+

fktub225-17
£8.45 (£10.14 inc VAT)
Motorcycle Inner Tube 225/250 x 17
+

21275-Pirelli-Trial
£59.95 (£71.94 inc VAT)
21 inch - Pirelli 45P TL Professional Front Trials Tyre 275x21, 275-21, 2.75 x 21 Suit Front fitment only. Speed rating 45P = 93mph, 165kg. Tube or...
+

brake4366-C18
£4.75 (£5.70 inc VAT)
OEM: 60-4366, D4366, 60-7052, 06-6032, 06-1946, 3818-747
Brake Fluid Reservoir Diaphragm - Triumph 750cc Twins and Triples + Norton Commando Lockheed type front/rear brake fluid reservoir bellows as fitted to...
+

fktube225-19
£8.95 (£10.74 inc VAT)
Motorcycle Inner Tube 225/250 x 19
+

presscap-T14
£5.95 (£7.14 inc VAT)
Simple but effective valve caps that constantly monitor tyre pressure and alert you of pressure loss. Each cap has a minimum pressure rating, when tyre...

21275-IRC-Trial
£81.95 (£98.34 inc VAT)
21 inch - IRC TR-011F Front Trials Tyre 275x21, 275-21, 2.75 x 21 Suit Front fitment only. Tube type. Made in Japan. Radial Tyre. Trial Winner TR-011F. 4...
+

whrim14gg
£95.00 (£114.00 inc VAT)
Norton Rear Wheel Rim 19" - Cotton Reel Unequal 19" Rim Highly polished Stainless Steel or Premium Chrome, dimpled and pierced, ready for assembly. Hub...

spoke033
£99.95 (£119.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set. Ariel Heavyweight Singles and Twin models with Full Width Alloy Ariel type Hubs. Fitment: Front and Rear...
+

bear9-04y
£8.95 (£10.74 inc VAT)
OEM: T530, H826, 57-0530, 97-0826
Front Wheel bearing Kit - Triumph T15/T20 Triumph T15, T20 all years. OEM: T530, H826, 57-0530, 97-0826
+

brake7032-C18
£7.95 (£9.54 inc VAT)
OEM: 67-7032
BSA Brake Pedal Return Spring - A7, A10 Plunger Models - 1949 Onwards Suitable for all BSA Plunger Twins from 1949 onwards Made in England OEM: 67-7032
+

michtub17mi
£16.45 (£19.74 inc VAT)
Michelin Airstop Motorcycle Inner Tube 150/70 x 17, 160/70 x 17, 140/80 x 17, 130/90 x 17 17MI Michelin Airstop Motorcycle Inner Tube Suitable for -...
+

bear423-F4
£49.35 (£59.22 inc VAT)
OEM: A2-32, 17702, 01-7702
Single Lipped Roller Bearing Suit Norton 500/600 MOD 18/ES2/16H (Pre 1958) Crankshaft Drive Side and Timing Side Imperial sized bearing, for British...
+

wheel6031-C14
£14.45 (£17.34 inc VAT)
OEM: 67-6031
BSA A & B Group Rear Wheel Spindle Nut - QD Hub Swinging Arm Models Rear wheel spindle nut to fit A7, A10, B31, B33 swinging arm models. Made in...
+

bear9-01y
£8.95 (£10.74 inc VAT)
Front Wheel bearing Kit - BSA Bantam Rigid, D1, D3, C10L BSA Bantam Rigid frame, Bantam D1/D3 Plunger/Swinging arm, C10L Plunger OEM: 90-5525
+

fktub250-18
£8.45 (£10.14 inc VAT)
Motorcycle Inner Tube 250/275 x 18
+

spokegg01-h
£119.95 (£143.94 inc VAT)
Polished Stainless Steel Spoke and Nipple Set for Motorcycle. Made to your measurements, please specify size required. Set comprises of 40 Stainless Steel...

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.