.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Trials Bikes

21275trials
£32.95 (£39.54 inc VAT)
Universal 21" Motorcycle Tyre 275-21, 2.75 x 21 Trials type Suit Front, Speed rating 93mph. Tube type.
+

off-aflt001
£12.45 (£14.94 inc VAT)
Yamaha TY250 Mono - Foam Air Filter Finna two layer system - the coarser white layer pre-filters the air, the blue layer removes the fine dust particles....
+

off-pipe003
£54.95 (£65.94 inc VAT)
BSA B40 Trials Exhaust Pipe - High Level Right hand fit on BSA B40 Trials models. This pipe fits inside the frame, it has the correct bend and slight...
+

off-rsprk242/415
£43.95 (£52.74 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 415 Chain Rear Sprocket - From 58 to 66T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

off-rub000
£2.95 (£3.54 inc VAT)
Universal Kickstart Lever Rubber - Yamaha, Honda, Suzuki Type Kick start rubber rubber typical of the type used on classic trials and motocross bikes....
+

off-frmpart002
£3.95 (£4.74 inc VAT)
OEM: 49.00-395
Bultaco Headstock Breather Tube Fixing Plug - Sherpa, Alpina and Frontera Models Rubber bung that fits within the top yoke to secure the breather pipe....
+

off-frmpart010
£9.95 (£11.94 inc VAT)
OEM: 107.00-140
Bultaco Crankcase Ignition Wire Rubber Grommet - Sherpa, Pursang and Frontera Models Rubber boot to protect ignition wiring. Length: 41mm Width: 44.3mm...
+

fkgk660
£11.95 (£14.34 inc VAT)
Ossa MAR - 250cc - Engine Gasket Set 1973 Onwards Ossa Mick Andrews Replica, 250cc, Engine Gasket Set from 1973 Onwards Includes gaskets as shown in the...
+

off-tnut004
£37.95 (£45.54 inc VAT)
Ossa/Bultaco Fork Stanchion Top Nuts - With Ball Valves - 35mm Betor Forks Pair of billet alloy fork top caps with 'O' rings and integral ball and spring...
+

off-seal005
£6.95 (£8.34 inc VAT)
Pair of Fork Oil Seals - 31 x 43 x 10mm - Honda TL125 S Circa 1976 + Universal Fit Double spring Japanese industry standard original equipment fork oil...
+

off-bear1008
£33.95 (£40.74 inc VAT)
Yamaha Steering Head Bearings Taper Rollers - TY80, TY175 and TY250 Models Steering head taper roller bearing kit includes the upper and lower bearings...
+

off-msty038
£17.95 (£21.54 inc VAT)
Universal Trials Front Mudguard / Fork Brace Bracket - Lightweight Aluminium Suitable for classic twinshock models with both alloy and plastic mudguards...
+

off-ty250-seat-brackets
£18.50 (£22.20 inc VAT)
Yamaha TY250 Twinshock Standard Seat - Mounting Brackets - Stainless Steel Complete set of 3 brackets for the Yamaha TY250 seat. 1 x Front bracket 2 x...
+

off-f/tubes-MC09
£103.95 (£124.74 inc VAT)
Fantic 35mm Fork Tubes / Stanchions - Later 125, 200, 240 and 300cc Models With Double Pinch Bolts Pair of chrome plated fork stanchion tubes / fork...
+

off-lev040H
£5.95 (£7.14 inc VAT)
OEM: 53190-074-670, 53190-369-700
Honda Alloy Clutch Lever - TL125 and Early XL Models Authentic replica of the original - manufactured in cast alloy with rubber end cap. As used on many...
+

off-mud003-UP
£84.95 (£101.94 inc VAT)
Classic Trials Bike Rear D Section Mudguard - 5+1/2" - 18 or 19" Wheel - Unpolished Alloy Universal plain undrilled, D shaped profile to fit 18/19" rear...
+

wtf-mud031-red
£59.95 (£71.94 inc VAT)
OEM: 61100-KJ2-000Z, 61100-KR9-000Z
Honda Front Mudguard - TLR200, TLR250, RTL250 and TLM Models - White or Red - Plastic Good quality replica of the original front fender as used on...
 

wtf-shk-kit051
£29.95 (£35.94 inc VAT)
Yamaha Shock Absorber Lowering Kit - TY125, TY175, TY200 and Chase TY220 Models Designed specifically for TY220 Chase models - used to re-position and...
+

wtf-spkwash111
£4.45 (£5.34 inc VAT)
Honda Countershaft / Front Sprocket 20mm Spline Washer - TLR200, TLR250 and RTL250 Models Front sprocket splined washer - compatible with Talon gearbox...
+

wtf-gkset030-full
£14.95 (£17.94 inc VAT)
Full Gasket Set - Yamaha TY175 + TY200 and TY220 Chase Models Complete gasket set - correct fitment on the models listed. All gaskets except the head...
+

wtf-sump003
£54.95 (£65.94 inc VAT)
OEM: 525-21471-00-39
Yamaha Bash Plate / Sump Guard - TY125 and TY175 Models Heavy duty aftermarket engine protector / skid plate manufactured from 6mm thick corrosion...
+

wtf-tool010
£6.95 (£8.34 inc VAT)
OEM: 07716-0020100
Honda Clutch Centre / Oil Filter Rotor Nut Tool - TLR200, TLR250, RTL250 + Later TL125 Models 24mm ID castellated socket for use with a 3/8" driver....
+

wtf-gb-seal012
£1.45 (£1.74 inc VAT)
OEM: 93109-12012-00
Yamaha Gear Selector Outer Cover Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-boltset269
£6.95 (£8.34 inc VAT)
OEM: 90128-382-670, 90128-446-770, 90308-382-670
Honda Rear Sprocket Nut and Bolt Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four rear sprocket retaining bolts with flanged nuts. Used in...
+

off-msty007
£29.00 (£34.80 inc VAT)
Norton / Ariel - Front Mudguard Stay - Classic Trials Bikes 350/500T + HT5 Suitable for classic Norton and Ariel trials bikes such as the Ariel HT5,...
+

off-sil011
£239.95 (£287.94 inc VAT)
Yamaha TY175 WES Alloy Exhaust Mid Box and Silencer This two piece silencer replaces the stock midbox and final silencer combination. You can adapt your...
+

off-shoe1137
£19.00 (£22.80 inc VAT)
Grooved Front/Rear Brake Shoes - Bultaco Pursang and Sherpa Models - 125mm x 25mm Premium quality pair of brake shoes for improved braking in wet and...
+

off-cab-B013008
£17.95 (£21.54 inc VAT)
Bultaco Clutch Cable - Sherpa Trials 250/325/350cc Models - Circa 1974-83 6mm pear nipple + 9.5mm x 13mm barrel nipple, long nose ferrule and...
+

off-cond370
£7.45 (£8.94 inc VAT)
OEM: 207-81326-90-00, 2078132690
Yamaha Condenser - TY175 / TY250 Models Circa 1974-77 OD: 18.9mm Length: 26.2mm Yamaha Part No. 207-81326-90-00,  2078132690 Made in Japan
+

off-cab-H024002
£13.45 (£16.14 inc VAT)
OEM: 17910-376-000
Honda TL250 Throttle Cable - Circa 1975-79 3mm x 4mm carburettor tube nipple, adjuster and cable boot. 4.2mm x 6mm drum nipple, cable adjuster and...
+

off-sil015
£77.95 (£93.54 inc VAT)
Fantic 241 Monoshock Alloy Exhaust Silencer Top quality silencer designed and manufactured by DEP as a direct replacement for the stock silencer....
+

off-ren520
£76.95 (£92.34 inc VAT)
520 Renthal R1 MX Chain - Ideal For Trials/Motocross - 5/8" x 1/4" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

off-lev1038.60
£21.95 (£26.34 inc VAT)
OEM: 1038.60
Domino Replacement Clutch Lever Blade - For 24mm Pivot Trials Clutch Lever Forged Duralumin, a hard, strong and lightweight aluminium alloy. Matt...
+

off-mud002-blue
£19.95 (£23.94 inc VAT)
Universal Trials Bikes Rear Mudguard - Plastic - Various Colours These are the type fitted as standard to Bultaco Sherpa, Ossa Mar 350 and Yamaha TY...
 

chainMTX428
£9.95 (£11.94 inc VAT)
OEM: 126SR, 110046
Gold Standard Heavy Duty 428 Motorcycle Chain - MTX - 110, 130 or 140 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x W) standard...

off-k/shaft-156
£79.95 (£95.94 inc VAT)
OEM: 525-15660-01-00
Yamaha Kickstart Shaft - TY125 and TY175 Models - Extra Long for Better Clearance Kick axle assembly made to the original Yamaha specific with an...
+

wtf-cam046
£59.95 (£71.94 inc VAT)
OEM: 14101-KJ2-000
Honda Re-Profiled Camshaft - TLR200, TLR250 + Later TL125 Models Circa 1983 Onwards Aftermarket re-profiled camshaft - the lobes give a higher lift to...
+

wtf-pw22+073
£84.95 (£101.94 inc VAT)
OEM: 16100-KJ2-673, 16100-KR9-004
Replica Keihin PW22 Carburettor + Throttle Cable - Honda TLR200, TLR250 + Early RTL250 Models Kit contains: 24mm PW22 type carb + Venhill throttle...
+

wtf-gb-seal060
£1.45 (£1.74 inc VAT)
OEM: 93101-12060-00
Yamaha Gear Selector Shaft Inner Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-tap005
£8.95 (£10.74 inc VAT)
1/4" BSP Fuel Tap with Right Hand Spigot and Filter - Internally Threaded Tank Outlet BAP type main tap with RH outlet spigot - ON / OFF / RESERVE....
+

21275-Pirelli-Trial
£59.95 (£71.94 inc VAT)
21 inch - Pirelli 45P TL Professional Front Trials Tyre 275x21, 275-21, 2.75 x 21 Suit Front fitment only. Speed rating 45P = 93mph, 165kg. Tube or...
+

off-sil004
£79.95 (£95.94 inc VAT)
Yamaha TY250 S Mono Alloy Exhaust Silencer Correct fitment on TY250 S models - frame number from: 59N. Oval profile aluminium silencer with perforated...
+

off-tankbar
£27.95 (£33.54 inc VAT)
Triumph Tiger Cub Trials Fuel Tank Fitting Bar - For Alloy Tanks Designed in association with Sammy Miller, bolts directly to a standard frame to mount...
+

off-cab-A044002
£12.45 (£14.94 inc VAT)
Throttle Cable - Amal T80/200 or Magura 313 Twistgrip to Amal MK1 Concentric Carburettor 3mm x 4mm carburettor tube nipple, plain ferrule and cable...
+

off-cont2913
£9.95 (£11.94 inc VAT)
OEM: 2913, 6620001
Montesa/Bultaco Contact Set / Points - Motoplat Ignition Correct fitment on many Montesa models including 123 and 247 models + late Bultaco Sherpa 199B...
+

off-g/box-plug001
£8.95 (£10.74 inc VAT)
OEM: 179.11-036, 80.11-036
Bultaco Alloy Gearbox Oil Filler Plug - Alpina, Sherpa T and Pursang Models Overall length: 19.9mm Length UH: 13mm Overall diameter: 22mm Thread: 13mm...
+

off-cab-H024001
£15.95 (£19.14 inc VAT)
OEM: 17910-355-000
Honda TL125 Throttle Cable - Circa 1975-77 3mm x 4mm carburettor tube nipple, cable adjuster and boot. 5mm x 6mm drum nipple, cable adjuster and boot....
+

off-cab-O011001
£19.95 (£23.94 inc VAT)
Ossa MAR Front Brake Cable - 250/350cc Models - Circa 1972-79 Correct fitment on 250cc models from 1972-79 and 350cc models from 1976-79. 6mm x 10mm...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.