.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Trials Bikes

off-klev345
£18.95 (£22.74 inc VAT)
Yamaha Kickstart Lever Assembly - DT125 and DT175 Twinshock Models Circa 1974-77 Forged steel kickstarter to fit pre 1978 DT175 + DT125 and Enduro twin...
+

off-gsprk373-10
£18.95 (£22.74 inc VAT)
Montesa Cota Splined Gearbox Sprocket -  248, 349, 310 and 311 Models - 520 Chain - 10T or 11T - Talon Front sprocket suitable for Montesa Cota 248 and...
 

off-cab-HL806
£18.95 (£22.74 inc VAT)
OEM: 22870-355-010, 22870-KB1-405
Honda TL125 Clutch Cable - K and S Models Circa 1973-76 Good quality aftermarket clutch cable suitable for the earlier K and S TL125 models. Also...
+

wtf-sealkit021
£18.95 (£22.74 inc VAT)
Yamaha Crankshaft Oil Seal Kit - TY125 and TY175 Models - All Years Primary drive side SW type oil seal and O ring + magneto / flywheel side SD type oil...
+

wtf-boots059-pair
£18.95 (£22.74 inc VAT)
Yamaha Fork Wipers / Dust Guard Boots - TY125 and TY175 With 30mm Forks - Aftermarket Pair of fork dust seals as used on  all TY125 and TY175 +...
+

off-ty250-seat-brackets
£18.50 (£22.20 inc VAT)
Yamaha TY250 Twinshock Standard Seat - Mounting Brackets - Stainless Steel Complete set of 3 brackets for the Yamaha TY250 seat. 1 x Front bracket 2 x...
+

fkchainsss520
£17.95 (£21.54 inc VAT)
OEM: 110054
520 Standard Classic Motorcycle 135RESR 5/8" x 1/4" Chain - Triple SSS - 102 to 130 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4"...

off-ten005
£17.95 (£21.54 inc VAT)
Yamaha Chain Tensioner Assembly - TY125, TY175 and TY250 Twinshock Models Correct fitment on TY twinshock models + universal fit on other trials bikes....
+

off-cab-M041002
£17.95 (£21.54 inc VAT)
Montesa Cota Front Brake Cable - 125/175/250cc Models - Circa 1973-80 Correct fitment on 125 and 175cc models from 1973-77 +  250cc models from 1975-80....
+

off-cab-M043009
£17.95 (£21.54 inc VAT)
Montesa Cota Clutch Cable - MK1 349 Models - Circa 1979-80 6mm x 10mm barrel nipple, cable boot, cable adjuster and cap. 6mm x 10mm barrel nipple with...
+

off-cab-M043006
£17.95 (£21.54 inc VAT)
Montesa Cota Clutch Cable - 247/248/348 Models - Circa 1976-80 Correct fitment on  247 Clubman models from 1976-80, 248  models from 1979-80 and 348...
+

off-cab-M043016
£17.95 (£21.54 inc VAT)
Montesa Cota MH 349 Clutch Cable - Circa 1984-85 6mm x 10mm barrel nipple, cable boot, cable adjuster and cap. 6mm x 10mm barrel nipple with stepped...
+

off-cab-O013001
£17.95 (£21.54 inc VAT)
Ossa MAR Clutch Cable - 250/350cc Models Circa 1972-79 Correct fitment on 250cc MAR models from 1972-79 and 350cc MAR models from 1976-79. 6mm pear...
+

off-cab-M043011
£17.95 (£21.54 inc VAT)
Montesa Cota Clutch Cable - 349 Models - Circa 1981-83 6mm x 10mm barrel nipple, cable boot, cable adjuster and cap. 6mm x 10mm barrel nipple with...
+

off-cab-M043018
£17.95 (£21.54 inc VAT)
Montesa Cota Clutch Cable - 304/307/309 Models - Circa 1986-90 6mm x 10mm barrel nipple, cable boot, cable adjuster and sleeve boot. 6mm x 10mm barrel...
+

off-cab-M043002
£17.95 (£21.54 inc VAT)
Montesa Cota Clutch Cable - 250cc 247 UKR Models - Circa 1975-80 6mm x 10mm barrel nipple with nylon nipple sleeve (OD: 8mm). Stepped ferrule - no...
+

off-cab-M043001
£17.95 (£21.54 inc VAT)
Montesa Cota 247 Clutch Cable - MK1, MK2, MK3, MK4/4B and MK5 Models - Circa 1969-74 9.5mm x 13mm barrel nipple and stepped ferrule. Stepped ferrule -...
+

off-cab-B013008
£17.95 (£21.54 inc VAT)
Bultaco Clutch Cable - Sherpa Trials 250/325/350cc Models - Circa 1974-83 6mm pear nipple + 9.5mm x 13mm barrel nipple, long nose ferrule and...
+

off-cont2578/m
£17.95 (£21.54 inc VAT)
OEM: 220-041, 2578/M, 5585 J
Bultaco/Ossa/Montesa Contact Set / Points - Femsa Ignition Correct fitment on 125, 250 and 350cc Bultaco Alpina, Frontera and Sherpa T models + Ossa and...
+

off-cab-Y013003
£17.95 (£21.54 inc VAT)
OEM: 525-26335-00-00
Yamaha TY175 Clutch Cable  - Circa 1975-83 6mm pear nipple, long nose stepped ferrule, aluminium bush and cap. 6mm x 10mm barrel nipple with nylon...

off-cab-Y013004
£17.95 (£21.54 inc VAT)
OEM: 434-26335-03-00
Yamaha Clutch Cable - TY250/320 Twinshock Models Circa 1975-83 6mm pear nipple, long nose stepped ferrule, aluminium bush and cable sleeve. 6mm x...

off-cab-Y013026
£17.95 (£21.54 inc VAT)
OEM: 38V-26335-00
Yamaha Clutch Cable - TY250 L N, R and S Monoshock Models Circa 1984-92 6mm pear nipple, long nose stepped ferrule, aluminium bush and cable sleeve....
+

off-cab-S011007
£17.95 (£21.54 inc VAT)
OEM: 58110-38000
Suzuki RL250 MK2 Front Brake Cable - Circa 1974-78 8mm x 8mm barrel nipple, ferrule/cable adjuster and cap. 8mm x 9mm barrel nipple and stepped ferrule....
+

fkgk222
£17.95 (£21.54 inc VAT)
Yamaha TY175 - Engine Gasket Set - Circa 1974-76 Yamaha TY175 Gasket Set - Circa 1974-1976 Includes gaskets as shown in the photos
+

off-fnum001
£17.95 (£21.54 inc VAT)
Universal Aluminium Front Number Plate Board - Classic Twinshock Style Lightweight front number plate board with clear plastic section for competition...
+

off-cab-M043010
£17.95 (£21.54 inc VAT)
Montesa Cota 200 Clutch Cable - Circa 1981-83 6mm x 10mm barrel nipple, cable boot, cable adjuster and cap. 6mm x 10mm barrel nipple with stepped...
+

off-swt002
£17.95 (£21.54 inc VAT)
Universal Compact Handlebar Switch Assembly - 3 Position Lighting + Kill Button Ideal for trials and motocross bikes. Complete assembly suitable for...
+

off-cab-H021001
£17.95 (£21.54 inc VAT)
OEM: 45450-355-000
Honda TL125 Front Brake Cable - Circa 1975-77 6mm pear nipple, ferrule/cable adjuster and cap. 8mm x 9mm barrel nipple. Outer cable (including...
+

off-tapadp003
£17.95 (£21.54 inc VAT)
Bultaco Fuel Tap Adaptor - Standard 12mm Fuel Tap Conversion - 198/199 Sherpa T and Pursang Models Suitable for later 198/199 Sherpa T and Pursang models...
+

off-gsprk366
£17.95 (£21.54 inc VAT)
Honda Gearbox Sprocket TL125/TL200 Models - Supplied With Circlip - 428 Chain - 12T - Talon Front sprocket suitable for TL125 and TL200 models - supplied...
+

off-gsprk108_11
£17.95 (£21.54 inc VAT)
Yamaha Gearbox Sprocket - TY125 and TY175 Models - 428 Chain - 11T to 16T Front sprocket suitable for all Yamaha TY125 and TY175 models using standard...
 

off-glev509
£17.95 (£21.54 inc VAT)
Alloy Gear Lever - Yamaha TY + Honda TLR Models - 11mm Spline - Long Type Forged alloy left hand gear shift lever with folding spring loaded foot pedal....
+

off-boots004-pair
£17.95 (£21.54 inc VAT)
32mm Marzocchi or Universal Fork Wipers / Dust Guard Boots Pair of black rubber fork wipers for 32mm Marzocchi forks or universal fit. Correct fitment...
+

off-boots005-pair
£17.95 (£21.54 inc VAT)
35mm Marzocchi or Universal Fork Wipers / Dust Guard Boots - Montesa and Fantic Models Pair of black rubber fork wipers for 35mm Marzocchi forks or...
+

off-msty038
£17.95 (£21.54 inc VAT)
Universal Trials Front Mudguard / Fork Brace Bracket - Lightweight Aluminium Suitable for classic twinshock models with both alloy and plastic mudguards...
+

off-gsprk109_11
£17.95 (£21.54 inc VAT)
Yamaha Gearbox Sprocket - TY125, TY175 and TY250 Twinshock Models - 520 Chain - 10T to 14T Front sprocket suitable for all Yamaha TY125/175/250 twinshock...
 

off-gsprk355-11
£17.95 (£21.54 inc VAT)
Bultaco Gearbox Sprocket - Sherpa, Pursang, Frontera Models 1976 Onwards - 520 Chain - 11T to 14T Front sprocket suitable for Sherpa, Pursang and...
 

off-gsprk354-14
£17.95 (£21.54 inc VAT)
Bultaco Gearbox Sprocket - Early Sherpa and Pursang Models Pre 1975 - 428 Chain - 14T to 16T - Talon Front sprocket suitable for earlier Sherpa and...
 

wtf-cslider-015
£17.95 (£21.54 inc VAT)
Honda Chain Slider / Swinging Arm Protector - TLR200, Reflex and TLR250F Models - Circa 1983-87 Genuine Honda chain slider - locates at the axle end of...
+

wtf-clarm137
£17.95 (£21.54 inc VAT)
Honda TLR200 / TLR250 Clutch Actuating Arm Extension / Lightener Lightweight alloy clutch arm extension suitable for use on TLR200, Reflex and TLR250...
+

wtf-bped004
£17.95 (£21.54 inc VAT)
OEM: 525-27211-00-91
Yamaha Rear Brake Pedal - TY125, TY175, TY200 and TY220 Chase Models Chrome plated steel aftermarket replacement rear brake pedal. Suitable for all...
+

off-shoe1153G
£17.00 (£20.40 inc VAT)
Front/Rear Brake Shoes - Ossa MAR MK1 and MK2 - 122mm x 30mm Premium quality pair of brake shoes for improved braking in wet and muddy conditions....
 

off-lit001
£16.95 (£20.34 inc VAT)
Universal Trials Rear Light and Rubber Number Plate Holder - Bultaco, Ossa, Montesa Type Rubber number plate board with attached round stop light....
+

off-cab-M041014
£16.95 (£20.34 inc VAT)
Montesa Cota MH 349 Front Brake Cable - Circa 1984-85 6mm pear nipple + 12mm x 16mm barrel nipple, cable boot, cable adjuster and sleeve boot. 6mm x 10mm...
+

off-cab-B013004
£16.95 (£20.34 inc VAT)
Bultaco Pursang Clutch Cable - 125/250/360/370cc Models - Circa 1974-79 Correct fitment on: 1974 MK7 models, 1975 MK8 models, MK9 & MK10 models from...
+

off-cab-CUB1003
£16.95 (£20.34 inc VAT)
Triumph Tiger Cub Trials Front Brake Cable - Sammy Miller Old Type - 40+1/2" Inner 6mm pear nipple, clevis with 6mm holes, adjuster and cable boot....
+

off-cab-Y013034
£16.95 (£20.34 inc VAT)
OEM: 4GG-26335-00
Yamaha Clutch Cable - TY250 Z Monoshock Models Circa 1993-98 6mm pear nipple, long nose stepped ferrule, aluminium bush and cable sleeve. 6mm x 10mm...
+

off-cab-S013007
£16.95 (£20.34 inc VAT)
OEM: 58200-31001
Suzuki RL250 Clutch Cable  - Circa 1974-77 6mm pear nipple, stepped ferrule, cable adjuster and cap. 6mm x 10mm barrel nipple with nylon nipple...
+

off-cab-H023028
£16.95 (£20.34 inc VAT)
OEM: 22870-ND9-000
Honda RTL 250 Clutch Cable - Circa 1985-87 6mm pear nipple, cable adjuster/ferrule and cable sleeve. 6mm x 10mm barrel nipple with nylon nipple...
+

off-cab-H024019
£16.95 (£20.34 inc VAT)
OEM: 17920-KJ2-305
Honda Throttle Cable TLR200 E/F/G Models - Circa 1984-86 3mm x 4mm carburettor tube nipple and cable boot. 5mm x 6mm drum nipple, cable adjuster and...
+

fkgk430
£16.95 (£20.34 inc VAT)
Montesa Cappra VR 250cc - Engine Gasket Set - Circa 1973-74 Includes gaskets as shown in the photos Made in England
+

off-sarm004
£16.95 (£20.34 inc VAT)
OEM: 159.03-008
Bultaco 14mm Swinging Arm Spindle - Sherpa, Pursang and Alpina Models - From 1974 Onwards Threaded at one end only - round head with flat section....
+

off-sam-RB2001
£16.95 (£20.34 inc VAT)
Rear Brake Cable - Triumph Tiger Cub Trials + Universal Fit - From 43cm to 54.5cm 6.3mm pear nipple + clevis with 6mm (1/4") holes. 136mm part threaded...

off-aflt010
£16.95 (£20.34 inc VAT)
Bultaco Sherpa T Foam Air Box Filter With Rubber Coupling Hose - Amal Carb Models Bultaco Sherpa models fitted with a standard Amal Mk1 carburettor....
+

off-cab-CUB1001
£16.95 (£20.34 inc VAT)
Triumph Tiger Cub Trials Front Brake Cable - Sammy Miller Old Type - 39" Inner 6mm pear nipple, clevis with 6mm holes, adjuster and cable boot. 13mm x...
+

off-gsprk482-13
£16.95 (£20.34 inc VAT)
OEM: 90-0299, 90-299
BSA Bantam - 420 Chain Gearbox Sprocket - 13T or 14T - Talon Front sprocket suitable for BSA Bantam trials/competition models using standard 420 chain....
 

off-gsprk365-9
£16.95 (£20.34 inc VAT)
Honda Gearbox Sprocket TLR200 and TLR250 Models - Supplied With Circlip - 520 Chain - 9T, 10T or 11T Front sprocket suitable for TLR200 and TLR250 models...
 

wtf-shoe253
£16.95 (£20.34 inc VAT)
OEM: 22F-W2534-00, 4KN-W253E-11
Yamaha OEM Front / Rear Brake Shoes - TY125, TY175 and TY250 Models - 110mm x 25mm Genuine Yamaha brake shoes supplied with springs. Front fitment on...
+

wtf-glev038
£16.95 (£20.34 inc VAT)
Alloy Gear Lever - Honda RTL250 / TLR Models + Yamaha TY Models - Steel Folding Pedal Forged alloy left hand gear shift lever with steel folding spring...
+

off-swbush001
£15.95 (£19.14 inc VAT)
Triumph Tiger Cub / BSA Bantam Trials Swinging Arm - Replacement Silent Block Bushes Pair of metalastic silent block bushes as used in our Sammy Miller...

off-shoe1135
£15.95 (£19.14 inc VAT)
Grooved Front/Rear Brake Shoes - Bultaco Frontera, Sherpa and Pursang Models + Montesa RC 248 Premium quality pair of brake shoes for improved braking in...
+

off-twist001
£15.95 (£19.14 inc VAT)
OEM: 1800.03
Domino Quick Action Twist Grip/Throttle Control With 90° Exit Cable Complete twistgrip assembly includes: throttle body, side cover, cable reel, nylon...
+

off-twist003
£15.95 (£19.14 inc VAT)
OEM: 0666.03
Domino Slow Action Twist Grip/Throttle Control With 90° Exit Cable Complete twistgrip assembly includes: throttle body, side cover, cable reel, nylon...
+

off-cab-B013006
£15.95 (£19.14 inc VAT)
Bultaco Clutch Cable - Sherpa Trials 250/325/350cc Models - Circa 1970-72 9.5mm x 13mm barrel nipple and stepped ferrule. Stepped ferrule - no nipple on...
+

off-cab-B011004
£15.95 (£19.14 inc VAT)
Bultaco Sherpa Front Brake Cable - 250cc Models - Circa 1965-72 + 1972 350cc Models Correct fitment on 250cc Sherpa models from 1965-72 + 1972 350cc...
+

off-cab-B014015
£15.95 (£19.14 inc VAT)
Bultaco Pursang Throttle Cable - 250/360/370cc MK9, MK10 and MK11 Models Circa 1976-78 3mm x 4mm carburettor tube nipple, plain ferrule and cable boot....
+

off-cab-H024001
£15.95 (£19.14 inc VAT)
OEM: 17910-355-000
Honda TL125 Throttle Cable - Circa 1975-77 3mm x 4mm carburettor tube nipple, cable adjuster and boot. 5mm x 6mm drum nipple, cable adjuster and boot....
+

off-cab-Y014004
£15.95 (£19.14 inc VAT)
OEM: 525-26311-01
Yamaha Throttle Cable TY175/TY250 Models With Standard Twistgrip - Circa 1975-83 For use on models with no oil pump. 3mm x 4mm carburettor tube...

off-lev003WSB
£15.95 (£19.14 inc VAT)
Short Blade Brake Lever - Complete Assembly - 7/8" Bars - Red/White Brake lever to fit 22mm (7/8") handlebars. Shallow dog leg. Adjuster type - supplied...
+

off-lev003WSC
£15.95 (£19.14 inc VAT)
Short Blade Clutch Lever - Complete Assembly - 7/8" Bars - Red/White Clutch lever to fit 22mm (7/8") handlebars. Shallow dog leg. Adjuster type -...
+

fkgk431
£15.95 (£19.14 inc VAT)
Montesa Cota 348 310cc - Engine Gasket Set - Circa 1976-77 Includes gaskets as shown in the photos Made in England
+

off-tenpart008
£15.95 (£19.14 inc VAT)
Universal Alloy Snail Cam Chain Adjusters - 12mm, 15mm or 17mm Spindle Pair of anodised silver left and right hand chain tensioners. Embossed with the...

wtf-gkset485-full
£15.95 (£19.14 inc VAT)
Gasket Set - Honda TLR200 D/E + Reflex G/H Models - Circa 1983-87 Extensive range of gaskets and O rings suitable for all TLR200 models. Includes the...
+

off-aflt009
£15.95 (£19.14 inc VAT)
Bultaco Sherpa T Foam Air Box Filter With Rubber Coupling Hose - Later Models Layed foam system - the coarser layers pre filter the air, the finer layer...
+

off-boots001
£15.95 (£19.14 inc VAT)
OEM: 11.02-017
Bultaco Fork Wipers / Dust Guard Boots - Early Plain Type To Fit 35mm Forks Pair of plain black rubber fork wipers with embossed Bultaco logo as used on...
+

off-boots002
£15.95 (£19.14 inc VAT)
OEM: 100.02-017
Bultaco Fork Wipers / Dust Guard Boots - Later Finned Type To Fit 35mm Forks Pair of finned black rubber fork wipers with embossed Bultaco logo as used...
+

off-levcov002
£15.95 (£19.14 inc VAT)
OEM: 5430.167
Montesa Brake and Clutch Lever Rubber Dust Covers / Protectors - Pair As used on Cota and Cappra models plus Montesa Enduro bikes. Suitable for use with...
+

off-swt996
£15.95 (£19.14 inc VAT)
Universal Handlebar Mounted Tether Type Kill Switch - Open Circuit Ideal for use on trials and motocross bikes. Cap style with red and black body and...
+

off-cab-BRI4100
£15.95 (£19.14 inc VAT)
Universal Throttle Cable Kit For Single Carb Models - Conduit, Wire, Adjusters, Boots, Nipples and Ferrules 1.6 metres (5.2 feet) of 1.5mm inner wire...
+

wtf-levers-7071
£15.95 (£19.14 inc VAT)
Pair of Alloy Standard Length Clutch and Brake Levers with Shallow Dog Leg - 7/8" Bars Clutch and brake lever to fit 22mm (7/8") handlebars. Cast alloy...
+

wtf-tap072
£15.95 (£19.14 inc VAT)
OEM: 434-24500-03-00
16mm Fuel Tap with 90° RH Spigot Outlet - Yamaha TY125, TY175 and TY250 + Universal Use M16 x 1.5mm petrol tap with left hand threaded locknut and right...
+

wtf-sarm010-pair
£15.95 (£19.14 inc VAT)
Yamaha Swinging Arm Extension Plates - TY125, TY175 and Chase Models Pair of left and right hand swing arm lengthening plates to extend the wheel base...
+

off-hose001
£15.45 (£18.54 inc VAT)
OEM: 159.15-166, 199.15-166
Bultaco Air Box Filter Rubber Coupling Hose - Bing or Mikuni Carburettor - 45mm Correct fitment on 350cc Sherpa T models from 1976 onwards. ID -...
+

off-shoe1156
£15.00 (£18.00 inc VAT)
Grooved Rear Brake Shoes - Ossa Gripper TR80 Models From 1981 Onwards - 120mm x 25mm Premium quality pair of brake shoes for improved braking in wet and...
+

eltx-200adp
£15.00 (£18.00 inc VAT)
Triumph Tiger Cub Adaptor Sleeve for Electronic Ignition Kit - Pre 1962 Models Rotor adaptor sleeve for use on pre 1962 Triumph T20 Tiger Cub models when...
+

off-shoe1105
£14.95 (£17.94 inc VAT)
Grooved Front/Rear Brake Shoes - Yamaha TY, DT, XT Models - Circa 1976-90 - 130mm x 28mm Premium quality pair of brake shoes for improved braking in wet...

off-aflt003
£14.95 (£17.94 inc VAT)
Yamaha TY125 / TY175 Twinshock - Foam Air Filter Finna two layer system - the white coarser layer pre-filters the air, the blue layer removes the fine...
+

off-aflt004
£14.95 (£17.94 inc VAT)
Yamaha TY250 Twinshock - Foam Air Filter Finna two layer system - the outer coarser layer pre-filters the air, the inner layer removes the fine dust...
+

off-shoe0200
£14.95 (£17.94 inc VAT)
Grooved Front/Rear Brake Shoes - Beta, Fantic, SWM, Cagiva - 125mm x 25mm Premium quality pair of brake shoes for improved braking in wet and muddy...

off-cab-B011009
£14.95 (£17.94 inc VAT)
Bultaco Sherpa Front Brake Cable - 250/325/300 Models - Circa 1982-83 9.5mm x 13mm barrel nipple, 6mm long nose ferrule and cap. 6mm x 10mm barrel nipple...
+

off-cab-O013003
£14.95 (£17.94 inc VAT)
Ossa TR 80 Clutch Cable - 250/350cc Models with Betor or Telesco Forks - Circa 1980-82 Correct fitment on 250cc and 350cc TR80 Gripper models with...
+

off-cab-B013005
£14.95 (£17.94 inc VAT)
Bultaco Clutch Cable - Sherpa Trial 250cc Models - Circa 1965-69 6mm pear nipple + 9.5mm x 13mm barrel nipple and stepped ferrule. Stepped ferrule - no...
+

off-cab-B403001
£14.95 (£17.94 inc VAT)
BSA Clutch Cable - B40 and C15 Competition Models - Side Points 6mm pear nipple with 9.5mm x 13mm barrel nipple and stepped ferrule. 6mm ball nipple...
+

off-cab-B013007
£14.95 (£17.94 inc VAT)
Bultaco Clutch Cable - Sherpa Trials 250/325/350cc Models - 1973 Only 6mm x 10mm barrel nipple with nylon nipple sleeve (OD: 8mm). Stepped ferrule - no...
+

off-cab-B012001
£14.95 (£17.94 inc VAT)
Bultaco Sherpa Trials Rear Brake Cable - Left Side Fit - 250/325/350cc Models Circa 1968-73 Correct fitment on 250cc models from 1968-73 + 325/350cc...
+

off-cab-B011005
£14.95 (£17.94 inc VAT)
Bultaco Sherpa Front Brake Cable - All Models With Alloy Amal Levers - Circa 1973 6mm x 10mm barrel nipple with nylon nipple sleeve (OD: 8mm) and stepped...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.