.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Trials Bike Parts

off-frmpart002
£3.95 (£4.74 inc VAT)
OEM: 49.00-395
Bultaco Headstock Breather Tube Fixing Plug - Sherpa, Alpina and Frontera Models Rubber bung that fits within the top yoke to secure the breather pipe....
+

off-frmpart010
£9.95 (£11.94 inc VAT)
OEM: 107.00-140
Bultaco Crankcase Ignition Wire Rubber Grommet - Sherpa, Pursang and Frontera Models Rubber boot to protect ignition wiring. Length: 41mm Width: 44.3mm...
+

fkgk660
£11.95 (£14.34 inc VAT)
Ossa MAR - 250cc - Engine Gasket Set 1973 Onwards Ossa Mick Andrews Replica, 250cc, Engine Gasket Set from 1973 Onwards Includes gaskets as shown in the...
+

off-tnut004
£37.95 (£45.54 inc VAT)
Ossa/Bultaco Fork Stanchion Top Nuts - With Ball Valves - 35mm Betor Forks Pair of billet alloy fork top caps with 'O' rings and integral ball and spring...
+

off-seal005
£6.95 (£8.34 inc VAT)
Pair of Fork Oil Seals - 31 x 43 x 10mm - Honda TL125 S Circa 1976 + Universal Fit Double spring Japanese industry standard original equipment fork oil...
+

off-bear1008
£33.95 (£40.74 inc VAT)
Yamaha Steering Head Bearings Taper Rollers - TY80, TY175 and TY250 Models Steering head taper roller bearing kit includes the upper and lower bearings...
+

off-msty038
£17.95 (£21.54 inc VAT)
Universal Trials Front Mudguard / Fork Brace Bracket - Lightweight Aluminium Suitable for classic twinshock models with both alloy and plastic mudguards...
+

off-ty250-seat-brackets
£18.50 (£22.20 inc VAT)
Yamaha TY250 Twinshock Standard Seat - Mounting Brackets - Stainless Steel Complete set of 3 brackets for the Yamaha TY250 seat. 1 x Front bracket 2 x...
+

off-f/tubes-MC01
£103.95 (£124.74 inc VAT)
OEM: 51410-KR9-003, 51410-KJ2-003
Honda 35mm Fork Tubes / Stanchions - TLR250 and Early TLR250 - Supplied with Top Nuts Pair of chrome plated fork stanchion tubes / fork legs suitable...
+

off-f/tubes-MC09
£103.95 (£124.74 inc VAT)
Fantic 35mm Fork Tubes / Stanchions - Later 125, 200, 240 and 300cc Models With Double Pinch Bolts Pair of chrome plated fork stanchion tubes / fork...
+

off-lev040H
£5.95 (£7.14 inc VAT)
OEM: 53190-074-670, 53190-369-700
Honda Alloy Clutch Lever - TL125 and Early XL Models Authentic replica of the original - manufactured in cast alloy with rubber end cap. As used on many...
+

off-mud003-UP
£84.95 (£101.94 inc VAT)
Classic Trials Bike Rear D Section Mudguard - 5+1/2" - 18 or 19" Wheel - Unpolished Alloy Universal plain undrilled, D shaped profile to fit 18/19" rear...
+

wtf-boltset022
£11.95 (£14.34 inc VAT)
Yamaha Engine Bolt Set - TY125, TY175, TY200 + Chase TY220 Models Full set of zinc plated pan head hex socket bolts - 37 pieces. Includes bolts for...
+

wtf-spkwash111
£4.45 (£5.34 inc VAT)
Honda Countershaft / Front Sprocket 20mm Spline Washer - TLR200, TLR250 and RTL250 Models Front sprocket splined washer - compatible with Talon gearbox...
+

wtf-sump003
£54.95 (£65.94 inc VAT)
OEM: 525-21471-00-39
Yamaha Bash Plate / Sump Guard - TY125 and TY175 Models Heavy duty aftermarket engine protector / skid plate manufactured from 6mm thick corrosion...
+

wtf-gkt144H
£1.95 (£2.34 inc VAT)
OEM: 152-14613-00
44mm OD Copper Exhaust Gasket - Yamaha TY175 and TY250 Twinshock + Universal Fit Hollow copper crush washer to provide a good seal between the header pipe...
+

wtf-tool010
£6.95 (£8.34 inc VAT)
OEM: 07716-0020100
Honda Clutch Centre / Oil Filter Rotor Nut Tool - TLR200, TLR250, RTL250 + Later TL125 Models 24mm ID castellated socket for use with a 3/8" driver....
+

wtf-boltset269
£6.95 (£8.34 inc VAT)
OEM: 90128-382-670, 90128-446-770, 90308-382-670
Honda Rear Sprocket Nut and Bolt Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four rear sprocket retaining bolts with flanged nuts. Used in...
+

off-msty007
£29.00 (£34.80 inc VAT)
Norton / Ariel - Front Mudguard Stay - Classic Trials Bikes 350/500T + HT5 Suitable for classic Norton and Ariel trials bikes such as the Ariel HT5,...
+

off-pipe003
£54.95 (£65.94 inc VAT)
BSA B40 Trials Exhaust Pipe - High Level Right hand fit on BSA B40 Trials models. This pipe fits inside the frame, it has the correct bend and slight...
+

off-sil011
£239.95 (£287.94 inc VAT)
Yamaha TY175 WES Alloy Exhaust Mid Box and Silencer This two piece silencer replaces the stock midbox and final silencer combination. You can adapt your...
+

off-shoe1137
£19.00 (£22.80 inc VAT)
Grooved Front/Rear Brake Shoes - Bultaco Pursang and Sherpa Models - 125mm x 25mm Premium quality pair of brake shoes for improved braking in wet and...
+

off-rsprk242/415
£43.95 (£52.74 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 415 Chain Rear Sprocket - From 58 to 66T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

off-cab-B013008
£17.95 (£21.54 inc VAT)
Bultaco Clutch Cable - Sherpa Trials 250/325/350cc Models - Circa 1974-83 6mm pear nipple + 9.5mm x 13mm barrel nipple, long nose ferrule and...
+

off-cond370
£7.45 (£8.94 inc VAT)
OEM: 207-81326-90-00, 2078132690
Yamaha Condenser - TY175 / TY250 Models Circa 1974-77 OD: 18.9mm Length: 26.2mm Yamaha Part No. 207-81326-90-00,  2078132690 Made in Japan
+

off-cab-H024002
£13.45 (£16.14 inc VAT)
OEM: 17910-376-000
Honda TL250 Throttle Cable - Circa 1975-79 3mm x 4mm carburettor tube nipple, adjuster and cable boot. 4.2mm x 6mm drum nipple, cable adjuster and...
+

off-sil015
£77.95 (£93.54 inc VAT)
Fantic 241 Monoshock Alloy Exhaust Silencer Top quality silencer designed and manufactured by DEP as a direct replacement for the stock silencer....
+

off-ren520
£76.95 (£92.34 inc VAT)
520 Renthal R1 MX Chain - Ideal For Trials/Motocross - 5/8" x 1/4" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

off-lev1038.60
£21.95 (£26.34 inc VAT)
OEM: 1038.60
Domino Replacement Clutch Lever Blade - For 24mm Pivot Trials Clutch Lever Forged Duralumin, a hard, strong and lightweight aluminium alloy. Matt...
+

chainMTX428
£9.95 (£11.94 inc VAT)
OEM: 126SR, 110046
Gold Standard Heavy Duty 428 Motorcycle Chain - MTX - 110, 130 or 140 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x W) standard...

wtf-cam046
£59.95 (£71.94 inc VAT)
OEM: 14101-KJ2-000
Honda Re-Profiled Camshaft - TLR200, TLR250 + Later TL125 Models Circa 1983 Onwards Aftermarket re-profiled camshaft - the lobes give a higher lift to...
+

wtf-mud031-red
£59.95 (£71.94 inc VAT)
OEM: 61100-KJ2-000Z, 61100-KR9-000Z
Honda Front Mudguard - TLR200, TLR250, RTL250 and TLM Models - White or Red - Plastic Good quality replica of the original front fender as used on...
 

wtf-shk-kit051
£27.95 (£33.54 inc VAT)
Yamaha Shock Absorber Lowering Kit - TY125, TY175, TY200 and Chase TY220 Models Designed specifically for TY220 Chase models - used to re-position and...
+

wtf-gkset030-full
£14.95 (£17.94 inc VAT)
Full Gasket Set - Yamaha TY175 + TY200 and TY220 Chase Models Complete gasket set - correct fitment on the models listed. All gaskets except the head...
+

wtf-pw22+073
£84.95 (£101.94 inc VAT)
OEM: 16100-KJ2-673, 16100-KR9-004
Replica Keihin PW22 Carburettor + Throttle Cable - Honda TLR200, TLR250 + Early RTL250 Models Kit contains: 24mm PW22 type carb + Venhill throttle...
+

wtf-gb-seal012
£1.45 (£1.74 inc VAT)
OEM: 93109-12012-00
Yamaha Gear Selector Outer Cover Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

21275-Pirelli-Trial
£59.95 (£71.94 inc VAT)
21 inch - Pirelli 45P TL Professional Front Trials Tyre 275x21, 275-21, 2.75 x 21 Suit Front fitment only. Speed rating 45P = 93mph, 165kg. Tube or...
+

off-sil004
£79.95 (£95.94 inc VAT)
Yamaha TY250 S Mono Alloy Exhaust Silencer Correct fitment on TY250 S models - frame number from: 59N. Oval profile aluminium silencer with perforated...
+

off-tankbar
£27.95 (£33.54 inc VAT)
Triumph Tiger Cub Trials Fuel Tank Fitting Bar - For Alloy Tanks Designed in association with Sammy Miller, bolts directly to a standard frame to mount...
+

off-cab-A044002
£12.45 (£14.94 inc VAT)
Throttle Cable - Amal T80/200 or Magura 313 Twistgrip to Amal MK1 Concentric Carburettor 3mm x 4mm carburettor tube nipple, plain ferrule and cable...
+

off-g/box-plug001
£8.95 (£10.74 inc VAT)
OEM: 179.11-036, 80.11-036
Bultaco Alloy Gearbox Oil Filler Plug - Alpina, Sherpa T and Pursang Models Overall length: 19.9mm Length UH: 13mm Overall diameter: 22mm Thread: 13mm...
+

off-cab-H024001
£15.95 (£19.14 inc VAT)
OEM: 17910-355-000
Honda TL125 Throttle Cable - Circa 1975-77 3mm x 4mm carburettor tube nipple, cable adjuster and boot. 5mm x 6mm drum nipple, cable adjuster and boot....
+

off-cab-O011001
£19.95 (£23.94 inc VAT)
Ossa MAR Front Brake Cable - 250/350cc Models - Circa 1972-79 Correct fitment on 250cc models from 1972-79 and 350cc models from 1976-79. 6mm x 10mm...
+

off-hose002
£13.95 (£16.74 inc VAT)
OEM: 10.15-166
Bultaco Air Box To Carburettor Rubber Coupling Hose - Early Sherpa T Models - Pre 1971 Correct fitment on early four speed Sherpa T 10, 27 and 49 models...
+

off-coil-105465
£74.95 £68.95 (£82.74 inc VAT)
OEM: 105465, 105-465, 465100, 96 201
PVL Replacement Motoplat Compatible Ignition Coil - 105465 Suitable replacement analogue coil for Motoplat 465100 electronic ignition systems as used in...
+

off-boots005-pair
£17.95 (£21.54 inc VAT)
35mm Marzocchi or Universal Fork Wipers / Dust Guard Boots - Montesa and Fantic Models Pair of black rubber fork wipers for 35mm Marzocchi forks or...
+

off-swt996
£15.95 (£19.14 inc VAT)
Universal Handlebar Mounted Tether Type Kill Switch - Open Circuit Ideal for use on trials and motocross bikes. Cap style with red and black body and...
+

off-mud002-blue
£19.95 (£23.94 inc VAT)
Universal Trials Bikes Rear Mudguard - Plastic - Various Colours These are the type fitted as standard to Bultaco Sherpa, Ossa Mar 350 and Yamaha TY...
 

off-gsprk355-11
£17.95 (£21.54 inc VAT)
Bultaco Gearbox Sprocket - Sherpa, Pursang, Frontera Models 1976 Onwards - 520 Chain - 11T to 14T Front sprocket suitable for Sherpa, Pursang and...
 

off-gsprk433-12
£25.95 (£31.14 inc VAT)
OEM: 57-4306
BSA C15, B40, B50 - 520 Chain Gearbox Sprocket - 11T, 12T, 13T or 14T - Talon Front sprocket suitable for BSA trials/competition models using standard...
 

off-f/tubes-MC013
£82.50 (£99.00 inc VAT)
OEM: 4512312401
Yamaha TY80 Fork Tubes / Stanchions - All Models Circa 1974-84 - 457mm x 25mm Pair of chrome plated fork stanchion tubes / fork legs suitable for all...
+

off-oilseal432H
£3.45 (£4.14 inc VAT)
OEM: 91201-030-003, 91201-030-005, 91201-030-000
Honda Drive Shaft Oil Seal TL125 and XL Models Counter shaft oil seal as used on many Honda models including TL125 K and S models + XL100, XL125, XL185...
+

wtf-cap999H
£3.95 (£4.74 inc VAT)
Unpolished Alloy, OEM: 12361-383-000, 91303-107-000
Honda Rocker Cover Cap / Oil Screen Cap Drain Plug - TL125, TLR200 and TLR250 Models Tappet adjusting hole cap as used on TL125K and TL125S models +...
 

off-k/shaft-156
£79.95 (£95.94 inc VAT)
OEM: 525-15660-01-00
Yamaha Kickstart Shaft - TY125 and TY175 Models - Extra Long for Better Clearance Kick axle assembly made to the original Yamaha specific with an...
+

off-tenpart004-RED
£5.95 (£7.14 inc VAT)
OEM: 108-16-041
Universal Chain Tensioner Pad - Open Block Type - Red Hard wearing PVC. Length: 60mm Height: 46mm Internal width: 21.4mm Fixing hole centres: 40mm apart...
+

wtf-wbear-kit-060
£9.95 (£11.94 inc VAT)
OEM: 93306-30202-00, 93306-20204-00, 93104-22018-00, 93106-26005-00
Yamaha Rear Wheel Bearing Kit - TY125, TY175, TY200 and TY250 Twinshock Models Rear hub bearings and oil seals suitable for all TY twinshock models -...
+

wtf-cab-011CL
£33.95 (£40.74 inc VAT)
Genuine Yamaha Clutch Cable - TY125 and TY175 Models - All Years Premium quality genuine Yamaha clutch cable suitable for all TY125 and TY175 models....
+

wtf-seal042
£1.45 (£1.74 inc VAT)
OEM: 93102-26042-00
Yamaha Drive Shaft / Sprocket Oil Seal - TY125 and TY175 Models Output shaft oil seal as used on many Yamaha models including TY125, TY175 + TY200 and...
+

wtf-gb-seal060
£1.45 (£1.74 inc VAT)
OEM: 93101-12060-00
Yamaha Gear Selector Shaft Inner Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

fkrivet428-B12
£4.95 (£5.94 inc VAT)
428 Regina Classic Motorcycle Chain Connecting Rivet Link Rivet link for use with standard roller 428 motorcycle chain. Premium quality - Made in...
+

off-tenpart002
£6.95 (£8.34 inc VAT)
OEM: 2120.371
Montesa Cota - Chain Tensioner Block - 74, 123, 247 Models Chain guide tensioner pad as fitted to many Montesa Cota models. Double sided type. Length:...
+

off-cab-O013001
£17.95 (£21.54 inc VAT)
Ossa MAR Clutch Cable - 250/350cc Models Circa 1972-79 Correct fitment on 250cc MAR models from 1972-79 and 350cc MAR models from 1976-79. 6mm pear...
+

off-cab-B013004
£16.95 (£20.34 inc VAT)
Bultaco Pursang Clutch Cable - 125/250/360/370cc Models - Circa 1974-79 Correct fitment on: 1974 MK7 models, 1975 MK8 models, MK9 & MK10 models from...
+

off-cont2913
£9.95 (£11.94 inc VAT)
OEM: 2913, 6620001
Montesa/Bultaco Contact Set / Points - Motoplat Ignition Correct fitment on many Montesa models including 123 and 247 models + late Bultaco Sherpa 199B...
+

off-cab-Y011024
£19.95 (£23.94 inc VAT)
OEM: 53Y-26341-00
Yamaha TY250 Mono Front Brake Cable - Drum Brake Models - Circa 1984-90 6mm pear nipple, stepped ferrule, cable adjuster cap and convoluted cable boot....
+

off-cab-H023002
£18.95 (£22.74 inc VAT)
OEM: 22870-107-000
Honda TL250 Clutch Cable - Circa 1975-79 6mm pear nipple, stepped ferrule, cable adjuster and cap. 6mm x 10mm barrel nipple with nylon nipple...
+

off-cab-H021002
£18.95 (£22.74 inc VAT)
OEM: 45450-373-000
Honda TL250 Front Brake Cable - Circa 1975-79 8mm x 9mm barrel nipple, ferrule/cable adjuster and cap. 8mm x 9mm barrel nipple. Protective sleeving....
+

off-rub001
£4.45 (£5.34 inc VAT)
OEM: 75.13-016
Bultaco Gear Lever Rubber - Round Type For Later Sherpa and Pursang Models Gear shifter rubber embossed with the Bultaco logo. Length: 34mm OD: 17.8mm...
+

fkgk430
£16.95 (£20.34 inc VAT)
Montesa Cappra VR 250cc - Engine Gasket Set - Circa 1973-74 Includes gaskets as shown in the photos Made in England
+

off-heat001
£29.95 (£35.94 inc VAT)
Universal Trials Exhaust Heat Shield - Polished Aluminium - 23cm Suited to Honda TLR250 models or universal fit. Polished aluminium with stainless steel...
+

off-klev003
£89.95 (£107.94 inc VAT)
OEM: 712-010-1
Bultaco Kickstart Lever Assembly - Straight Type - 5 Speed Models Straight kickstarter suitable for most classic five speed Bultaco models including...
+

off-seal036
£6.95 (£8.34 inc VAT)
OEM: 11.02-026, 107.02-026
Pair of Fork Oil Seals - 35 x 47 x 7.5mm - Betor or Ceriani Forks + Universal Fit Thin type single lipped fork seals suitable for many models with 35mm...
+

off-levcov002
£15.95 (£19.14 inc VAT)
OEM: 5430.167
Montesa Brake and Clutch Lever Rubber Dust Covers / Protectors - Pair As used on Cota and Cappra models plus Montesa Enduro bikes. Suitable for use with...
+

off-cab-CUB1001
£16.95 (£20.34 inc VAT)
Triumph Tiger Cub Trials Front Brake Cable - Sammy Miller Old Type - 39" Inner 6mm pear nipple, clevis with 6mm holes, adjuster and cable boot. 13mm x...
+

off-scov005-W
£26.95 (£32.34 inc VAT)
OEM: 434-21711-00-26
Yamaha TY250 Side Panel With Decal - White or Yellow Authentic plastic replica side cover to fit TY250 models models. Includes vinyl decal/sticker....
 

off-gsprk401-13
£25.95 (£31.14 inc VAT)
OEM: 40-3041
BSA C15, B40 - 428 Chain Gearbox Sprocket - 13T, 14T, 15T, 16T or 18T - Talon Front sprocket suitable for BSA trials/competition models using standard...
 

off-spring-pair
£30.00 (£36.00 inc VAT)
Trials/MX Shock Absorber Springs - Various Strength - Pairs Pair of spr ings to fit our Trials and MX range of shock absorbers. Various spring...

wtf-sarm-134
£12.95 (£15.54 inc VAT)
OEM: 525-22141-00-00
Yamaha Swinging Arm Spindle / Pivot Shaft - TY125, TY175 and TY200 Models - 220mm Suitable for TY125, TY175 and TY200 models fitted with standard...
+

wtf-cap021-blk
£3.95 (£4.74 inc VAT)
Billet Alloy Fuel Tank Cap Vent / Breather Pipe - Universal Fit - Black or Red Petrol tank cap vent with one way valve to help prevents vacuum build up...
 

wtf-tap072
£15.95 (£19.14 inc VAT)
OEM: 434-24500-03-00
16mm Fuel Tap with 90° RH Spigot Outlet - Yamaha TY125, TY175 and TY250 + Universal Use M16 x 1.5mm petrol tap with left hand threaded locknut and right...
+

wtf-sealkit021
£18.95 (£22.74 inc VAT)
Yamaha Crankshaft Oil Seal Kit - TY125 and TY175 Models - All Years Primary drive side SW type oil seal and O ring + magneto / flywheel side SD type oil...
+

wtf-cab-010BR
£35.45 (£42.54 inc VAT)
Genuine Yamaha Front Brake Cable - TY125, TY175 and TY250 Twinshock Models Premium quality genuine Yamaha brake cable suitable for all TY125 and...
+

wtf-cabpart007
£3.45 (£4.14 inc VAT)
Cable Joint / Clevis Bend - Yamaha Front Brake Cable to Brake Arm + Universal Use Genuine Yamaha front brake cable to brake arm clevis joint. Slot...
+

wtf-ten006
£26.95 (£32.34 inc VAT)
OEM: 52181-KR9-000, 52174-KR9-000
Honda TLR200, TLR250 / RTL250 Chain Tensioner Assembly - Enclosed Block Type - Red Suitable for use on all TLR200, Reflex, TLR250 and RTL250 models +...
+

wtf-seal059
£1.45 (£1.74 inc VAT)
OEM: 93104-14059-00
Yamaha Clutch Arm / Push Lever Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-tap005
£8.95 (£10.74 inc VAT)
1/4" BSP Fuel Tap with Right Hand Spigot and Filter - Internally Threaded Tank Outlet BAP type main tap with RH outlet spigot - ON / OFF / RESERVE....
+

wtf-pist-H044
£195.95 (£235.14 inc VAT)
OEM: 13101-KR9-003, 131A1-KR9-003, 13111-KR9-000, 94601-150-00
Honda Piston Kit - TLR250F and RTL250S Models Circa 1985-89 - Standard or 0.50mm Oversize Premium quality Wiseco piston complete with gudgeon / wrist pin...

18350trials
£39.95 (£47.94 inc VAT)
Universal 18" Motorcycle Tyre 350-18, 3.50 x 18 Trials type Suit Rear fitment only Speed rating 93mph. Tube type. Please note this item may attract a...
+

21275-IRC-Trial
£81.95 (£98.34 inc VAT)
21 inch - IRC TR-011F Front Trials Tyre 275x21, 275-21, 2.75 x 21 Suit Front fitment only. Tube type. Made in Japan. Radial Tyre. Trial Winner TR-011F. 4...
+

off-rsprk229
£46.95 (£56.34 inc VAT)
Yamaha TY250 Mono Rear Sprocket - 35T to 44T - 520 Chain - Talon Anodised Alloy Standard rear sprocket to fit TY250 monoshock R and S models. Chain...

off-cab-M041006
£19.95 (£23.94 inc VAT)
Montesa Cota Front Brake Cable 247/248/348/349 Models - Circa 1977-80 Correct fitment on: 247 Clubman from 1976-80 + 248  models from 1979-80 + 348...
+

off-cab-B403001
£14.95 (£17.94 inc VAT)
BSA Clutch Cable - B40 and C15 Competition Models - Side Points 6mm pear nipple with 9.5mm x 13mm barrel nipple and stepped ferrule. 6mm ball nipple...
+

off-cab-B012005
£26.95 (£32.34 inc VAT)
Bultaco Sherpa Trials Heavy Duty Rear Brake Cable - 250/325/350cc Models - Circa 1979-83 2.5mm OD with 19 strand galvanised steel inner wire to provide...
+

off-cont2578/m
£17.95 (£21.54 inc VAT)
OEM: 220-041, 2578/M, 5585 J
Bultaco/Ossa/Montesa Contact Set / Points - Femsa Ignition Correct fitment on 125, 250 and 350cc Bultaco Alpina, Frontera and Sherpa T models + Ossa and...
+

off-cab-SAM4002
£13.45 (£16.14 inc VAT)
Honda TL125 Throttle Cable - Keihin Carburettor + Domino Twistgrip 3mm x 4mm carburettor tube nipple, cable adjuster and boot. 7.5mm x 5mm barrel...
+

off-seal2060
£4.95 (£5.94 inc VAT)
OEM: 2060-073
Montesa Cota Small Rear Silencer Rubber Joint / Coupler Rubber coupling seal, fits between the mid box and rear silencer. Embossed with the Montesa logo....
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.