.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

wtf-seal042
£1.45 (£1.74 inc VAT)
OEM: 93102-26042-00
Yamaha Drive Shaft / Sprocket Oil Seal - TY125 and TY175 Models Output shaft oil seal as used on many Yamaha models including TY125, TY175 + TY200 and...
+

off-rub003
£3.95 (£4.74 inc VAT)
OEM: 113.016
Bultaco Gear Lever Rubber - Flat Type For Earlier Sherpa and Pursang Models Gear shifter rubber embossed with the Bultaco logo. Length: 34mm Width: 22mm...
+

off-glev195
£14.95 (£17.94 inc VAT)
Universal Gear Lever - 100mm Length - 10mm Spline - Folding Type Gear shift lever s uitable  for many Honda, Kawasaki and Suzuki models or universal...
+

off-gsprk374-10
£25.95 (£31.14 inc VAT)
Montesa Cota Gearbox Sprocket - 348, 349 and 350 models - 520 Chain - 9T, 10T or 11T - Talon Front sprocket with tapered shaft, suitable for 348, 349 and...
 

wtf-boltset269
£6.95 (£8.34 inc VAT)
OEM: 90128-382-670, 90128-446-770, 90308-382-670
Honda Rear Sprocket Nut and Bolt Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four rear sprocket retaining bolts with flanged nuts. Used in...
+

off-pist-ty80
£19.95 (£23.94 inc VAT)
Yamaha TY80 Piston Kit - All Models Circa 1974-84 - Standard or Oversize Supplied as one piston complete with rings and gudgeon pin and circlips....

428half-elite-B12
£2.95 (£3.54 inc VAT)
Elite 428 Standard Chain Half / Cranked Link To fit 126SR 1/2" x 5/16" (P x W) standard 428 chain equivalent to Renold 110046. Allows you to make up...
+

off-glev005
£29.95 (£35.94 inc VAT)
OEM: 2866-017
Montesa Gear Lever - Early Cota 349 and Cappra 250 Models - Left Hand Folding Type Fits early Cota 349 models, not the later Honda MH models. Also correct...
+

off-finrub003
£13.95 (£16.74 inc VAT)
OEM: 134.005
Ossa TR80/303 Cylinder Fin Shock Absorber / Anti Vibration Rubbers - Pack of 4 Correct fitment on Ossa Gripper and 303 models + universal fit as...
+

wtf-clarm137
£17.95 (£21.54 inc VAT)
Honda TLR200 / TLR250 Clutch Actuating Arm Extension / Lightener Lightweight alloy clutch arm extension suitable for use on TLR200, Reflex and TLR250...
+

wtf-pist-ty175
£45.95 (£55.14 inc VAT)
OEM: 443-11636-03-00
Yamaha Piston Kit With Small End Bearing - TY175 / DT175 Models - Standard + Oversize Piston complete with top and second piston rings, gudgeon / wrist...

off-rsprk233
£43.95 (£52.74 inc VAT)
Yamaha TYZ Rear Sprocket - 39T - 520 Chain - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 6 bolt fitting: 80mm between hole centres ID:...

off-gsprk379-10
£10.95 (£13.14 inc VAT)
Montesa Cota Splined Gearbox Sprocket - 314 and 315 Models - 520 Chain - 10T - Talon Front sprocket suitable for Montesa Cota 314 and 315 models using...
 

wtf-clarm017
£8.95 (£10.74 inc VAT)
Yamaha Clutch Actuating Arm Extension / Lightener - TY125, TY175, TY200 + Chase TY220 Models Stainless steel clutch arm extension suitable for use on...
+

wtf-swing124
£8.95 (£10.74 inc VAT)
Yamaha Swinging Arm Protector / Chain Guard - TY125 and TY175 Models Genuine Yamaha rubber chain guard - locates at the axle / spindle end of the swing...
+

wtf-camten127
£19.95 (£23.94 inc VAT)
OEM: 14500-427-000
Honda Cam Chain Tensioner - TLR200, TLR250, RTL250 + XL185/200 Models Correct fitment on all TLR200, TLR250, RTL250, XL185 and XL200 models. Overall...
+

off-conrod-mt54
£149.95 (£179.94 inc VAT)
Montesa Conrod Kit - 250cc Enduro H7 and Cappra VG Models Circa 1981-85 - Italkit Suitable for 250cc Montesa Cappra VG or Enduro H7 models from 1981...
+

off-gkset485T
£13.95 (£16.74 inc VAT)
Honda TLR200 D/E - Top Engine Gasket Set - Circa 1982-84 Also fits Honda XL185 models from 1979-83.
+

off-glev170
£12.95 (£15.54 inc VAT)
Universal Gear Lever - 140mm Length - 10mm Spline - Straight Type Gear shift lever s uitable  for many Honda, Kawasaki and Suzuki models or universal...
+

off-klev350
£10.95 (£13.14 inc VAT)
Universal Kickstart Lever Assembly With 16mm Spline Chrome plated steel kickstarter suitable for various small capacity Japanese models. Hinged boss with...
+

wtf-cslider-015
£17.95 (£21.54 inc VAT)
Honda Chain Slider / Swinging Arm Protector - TLR200, Reflex and TLR250F Models - Circa 1983-87 Genuine Honda chain slider - locates at the axle end of...
+

wtf-gb-seal012
£1.45 (£1.74 inc VAT)
OEM: 93109-12012-00
Yamaha Gear Selector Outer Cover Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-seal059
£1.45 (£1.74 inc VAT)
OEM: 93104-14059-00
Yamaha Clutch Arm / Push Lever Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

off-bear281H
£14.45 (£17.34 inc VAT)
OEM: 91001-383-003, 91001-383-004, 63/28
Honda Crankshaft Bearing - TL125S, TLR200 and XL100, XL125, XL185 and XL250 Models Crankshaft main bearing as used on many Honda models including TL125S...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.