.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

off-gsprk376-10
£27.95 (£33.54 inc VAT)
Suzuki Gearbox Sprocket - RL250/RL325 Beamish Models - 520 Chain - 10T, 11T, 12T or 14T Front sprocket suitable for Suzuki RL250 and RL325 models. Will...
 

wtf-gksetTLR250
£28.95 (£34.74 inc VAT)
Gasket Set - Honda TLR250 + Earlier RTL250 Models - Circa 1985-87 Extensive range of gaskets and O rings suitable for TLR250 and early RTL250 models....
+

off-ten004-BLK
£29.50 (£35.40 inc VAT)
Yamaha TY250 Mono Steel Chain Tensioner Assembly - Block Type - Black Complete assembly including arm and block tensioner pad. Zinc plated steel arm for...
+

gsprk482/14/.335-B5
£29.95 (£35.94 inc VAT)
OEM: 90-0473, 90-473, 90-0299, 90-299
BSA Bantam Gearbox Sprocket All Models From D1 to D14 and B175 - 14T or 16T - 415 Chain 14 or 16 tooth front sprocket for D1, D3, D5, D7, D10, D14 and...
 

off-glev003
£29.95 (£35.94 inc VAT)
Montesa Cota 248 / 348 Alloy Gear Lever - Left Hand Folding Type Left hand gear shift lever with spring loaded foot pedal. Length: 125mm Splined shaft...
+

off-glev505
£29.95 (£35.94 inc VAT)
Honda TL125 Gear Lever - LH Folding Type - Alloy Left hand gear shift lever with spring loaded foot pedal. Will fit many 100/125cc Honda models...
+

off-glev005
£29.95 (£35.94 inc VAT)
OEM: 2866-017
Montesa Gear Lever - Early Cota 349 and Cappra 250 Models - Left Hand Folding Type Fits early Cota 349 models, not the later Honda MH models. Also correct...
+

off-esprk449
£29.95 (£35.94 inc VAT)
OEM: 70-3912, E3912
Triumph T20 Tiger Cub  - Duplex Engine Primary Drive Sprocket - 16T Crankshaft sprocket for Triumph Tiger Cub trials/competition models. Will require the...
+

fkgk327
£30.95 (£37.14 inc VAT)
BSA Motorcycle - 250cc C15, C15 Sports Star SS80 - Engine Gasket Set 1959-67
+

wtf-gksetRTL250-late
£31.95 (£38.34 inc VAT)
Gasket Set - Honda RTL250 Models - Circa 1988-89 Extensive range of gaskets and O rings suitable for later RTL250 models circa 1988-89. Earlier type also...
+

off-glev006
£32.95 (£39.54 inc VAT)
OEM: 2166.017
Montesa Gear Lever - Cota 247 Models - Left Hand Folding Type Left hand gear shift lever with spring loaded foot pedal. Length: 135mm Splined shaft...
+

off-ren420
£34.95 (£41.94 inc VAT)
420 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 3/16" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

off-ospk-kit001
£34.95 (£41.94 inc VAT)
Ossa MAR Rear Sprocket Conversion/Spacer Kit - MK1 and MK2 Models Complete spacer kit to convert Ossa MAR models with the original dished sprocket to use...
+

wtf-ks-pinion034
£34.95 (£41.94 inc VAT)
Yamaha Kickstart Pinion - TY125 and TY175 Models 27T kickstarter gear  as used on all TY125 and TY175 + TY200 and TY220 Chase models. Also suitable...
+

420regina
£37.95 (£45.54 inc VAT)
420 Regina Classic Motorcycle Chain - 125EBSR 1/2" x 3/16"  - 100 to 130 Links Supplied with a connecting spring link. 125EBSR 1/2" x 3/16" (P x W)...

off-ten001
£38.50 (£46.20 inc VAT)
Universal Chain Tensioner Assembly - Ball Race Roller Type - Steel Complete assembly including tensioner arm, roller pad, spring and pin. Zinc plated...
+

off-rsprk242/420
£39.95 (£47.94 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 420 Chain Rear Sprocket - From 54 to 68T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

regina428
£43.95 (£52.74 inc VAT)
OEM: 110046
428 Regina Classic Motorcycle Chain - 126SR 1/2" x 5/16" - 100 to 130 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x W) standard...

off-rsprk226
£43.95 (£52.74 inc VAT)
Yamaha TY125/TY175 Rear Sprocket - 428 Chain - 51T to 55T + 62T - Talon Anodised Alloy Chain Pitch:  1/2" x 5/16" - 428 6 bolt fitting: 81mm between...

off-rsprk219
£43.95 (£52.74 inc VAT)
Montesa Cota 74/123/200 Rear Sprocket - 428 Chain - 52T or 54T - Talon Anodised Alloy Chain Pitch:  1/2" x 5/16" - 428 5 bolt fitting: 78mm between...

off-rsprk242/428
£43.95 (£52.74 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 428 Chain Rear Sprocket - From 54 to 66T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

off-rsprk242/415
£43.95 (£52.74 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 415 Chain Rear Sprocket - From 58 to 66T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

off-rsprk216
£43.95 (£52.74 inc VAT)
Honda TL125, TL200, XL125, SL125 Rear Sprocket - 428 Chain - 49T to 60T - Talon Anodised Alloy Chain Pitch:  1/2" x 5/16" - 428 8 bolt fitting: 91mm...

off-rsprk233
£43.95 (£52.74 inc VAT)
Yamaha TYZ Rear Sprocket - 39T - 520 Chain - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 6 bolt fitting: 80mm between hole centres ID:...

off-glev001
£44.95 (£53.94 inc VAT)
Bultaco Gear Lever - RH Folding Type - Sherpa and Pursang Models - Pre 1977 Right hand gear shift lever with spring loaded foot pedal. Will fit 250/350cc...
+

off-glev002
£44.95 (£53.94 inc VAT)
Bultaco Gear Lever - LH Folding Type - Sherpa and Pursang Models Left hand gear shift lever with spring loaded foot pedal. Length: 160mm Splined shaft...
+

wtf-ks-gear131
£45.95 (£55.14 inc VAT)
Yamaha Kickstart Idler Gear - TY125 and TY175 Models 25T idle gear as used on  all TY125 and TY175 + TY200 and TY220 Chase models. Also suitable...
+

wtf-pist-ty175
£45.95 (£55.14 inc VAT)
OEM: 443-11636-03-00
Yamaha Piston Kit With Small End Bearing - TY175 / DT175 Models - Standard + Oversize Piston complete with top and second piston rings, gudgeon / wrist...

off-rsprk214
£46.95 (£56.34 inc VAT)
Honda TLR200 Rear Sprocket - 44T, 46T or 48T - 520 Chain - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 4 bolt fitting: 87mm between hole...

off-rsprk215
£46.95 (£56.34 inc VAT)
Honda TLR250, RTL250, TLM200/250 Rear Sprocket - 37T to 43T - 520 Chain - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 4 bolt fitting:...

off-rsprk227
£46.95 (£56.34 inc VAT)
Yamaha TY175 Rear Sprocket - 520 Chain - 39T, 43T or 46T - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 heavy duty chain 6 bolt fitting: 81mm...

off-rsprk229
£46.95 (£56.34 inc VAT)
Yamaha TY250 Mono Rear Sprocket - 35T to 44T - 520 Chain - Talon Anodised Alloy Standard rear sprocket to fit TY250 monoshock R and S models. Chain...

off-rsprk220
£46.95 (£56.34 inc VAT)
Montesa Cota Rear Sprocket 123, 200, 240, 242, 247, 304 Models - 520 Chain - 38, 40, 42, 44, 46, 48T Chain pitch: 5/8" x 1/4" - 520 chain 5 bolt...

off-rsprk221
£46.95 (£56.34 inc VAT)
Montesa Cota Rear Sprocket 307, 309, 310, 248, 349, 348, 350 Models - 520 Chain - 33-44T Chain pitch: 5/8" x 1/4" - 520 chain 6 bolt fitting: 128mm...

off-rsprk241
£46.95 (£56.34 inc VAT)
Ossa MAR Rear Sprocket - 520 Chain - 42T, 44T, 46T - Talon Anodised Alloy Flat sprocket for Ossa MAR MK1 and MK2 models. This is a replacement for the...

off-rsprk222
£46.95 (£56.34 inc VAT)
OEM: 134.654
Ossa Gripper TR80 Rear Sprocket - 520 Chain - 38T, 40T, 42T, 46T - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 6 bolt fitting: 158mm...

off-rsprk224
£46.95 (£56.34 inc VAT)
Yamaha TY80 Rear Sprocket - 420 Chain - 50T - Talon Anodised Alloy Chain Pitch: 1/2" x 1/4" - 420 chain 4 bolt fitting: 61mm between hole centres ID:...

off-rsprk374
£46.95 (£56.34 inc VAT)
Bultaco Rear Sprocket Pursang, Alpina, Frontera Models - 42T, 44T, 46T- 520 Chain - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 9 bolt...

off-rsprk203
£46.95 (£56.34 inc VAT)
Bultaco Rear Sprocket - Later Sherpa Models From 1974 Onwards - 39T to 48T - 520 Chain - Talon Anodised Alloy To fit later Bultaco Sherpa models from...

wtf-pist-H200
£47.49 (£56.99 inc VAT)
OEM: 13101-KJ2-003, 13011-446-811, 13111-425-000
Honda Piston Kit - TLR200 and Reflex Models Circa 1983-87 - Oversize Piston complete with gudgeon / wrist pin and circlips. Supplied with piston rings...

regina520
£49.95 (£59.94 inc VAT)
OEM: 110054
520 Regina Classic Motorcycle Chain - 135RESR 5/8" x 1/4"  - 96 to 120 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4" (P x W)...

off-ren428-134
£49.95 (£59.94 inc VAT)
428 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 5/16" Standard Chain - 134 Links Top quality heavy duty non 'O' ring chain  designed...
+

wtf-ks-ratchet037
£54.95 (£65.94 inc VAT)
Honda Kickstart Ratchet - TLR200, Reflex, TLR250 and + Later TL125 Models and XL Models Kickstart ratchet as used on all TLR200 and TLR250 models +...
+

wtf-cam046
£59.95 (£71.94 inc VAT)
OEM: 14101-KJ2-000
Honda Re-Profiled Camshaft - TLR200, TLR250 + Later TL125 Models Circa 1983 Onwards Aftermarket re-profiled camshaft - the lobes give a higher lift to...
+

wtf-ks-idler105
£64.95 (£77.94 inc VAT)
Honda Kickstart Idler Gear - TLR200, Reflex, TLR250 and + Later TL125 Models and XL Models 28T idle gear as used on all TLR200 and TLR250 models +...
+

wtf-ks-pinion038
£67.95 (£81.54 inc VAT)
Honda Kickstart Pinion - TLR200, Reflex, TLR250 and + Later TL125 Models and XL Models 30T kickstart pinion as used on all TLR200 and TLR250 models +...
+

off-ren520
£76.95 (£92.34 inc VAT)
520 Renthal R1 MX Chain - Ideal For Trials/Motocross - 5/8" x 1/4" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

off-klev001
£79.95 (£95.94 inc VAT)
Montesa Kickstart Lever Assembly - Cota 247, 348 and 349 Models Right hand kickstarter to fit various Cota 250/350cc models circa 1967 onwards + Impala...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.