.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

wtf-seal042
£1.45 (£1.74 inc VAT)
OEM: 93102-26042-00
Yamaha Drive Shaft / Sprocket Oil Seal - TY125 and TY175 Models Output shaft oil seal as used on many Yamaha models including TY125, TY175 + TY200 and...
+

off-rub003
£3.95 (£4.74 inc VAT)
OEM: 113.016
Bultaco Gear Lever Rubber - Flat Type For Earlier Sherpa and Pursang Models Gear shifter rubber embossed with the Bultaco logo. Length: 34mm Width: 22mm...
+

off-glev195
£14.95 (£17.94 inc VAT)
Universal Gear Lever - 100mm Length - 10mm Spline - Folding Type Gear shift lever s uitable  for many Honda, Kawasaki and Suzuki models or universal...
+

off-gsprk374-10
£25.95 (£31.14 inc VAT)
Montesa Cota Gearbox Sprocket - 348, 349 and 350 models - 520 Chain - 9T, 10T or 11T - Talon Front sprocket with tapered shaft, suitable for 348, 349 and...
 

wtf-boltset269
£6.95 (£8.34 inc VAT)
OEM: 90128-382-670, 90128-446-770, 90308-382-670
Honda Rear Sprocket Nut and Bolt Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four rear sprocket retaining bolts with flanged nuts. Used in...
+

428half-elite-B12
£2.95 (£3.54 inc VAT)
Elite 428 Standard Chain Half / Cranked Link To fit 126SR 1/2" x 5/16" (P x W) standard 428 chain equivalent to Renold 110046. Allows you to make up...
+

off-pist-ty80
£19.95 (£23.94 inc VAT)
Yamaha TY80 Piston Kit - All Models Circa 1974-84 - Standard or Oversize Supplied as one piston complete with rings and gudgeon pin and circlips....

off-glev005
£29.95 (£35.94 inc VAT)
OEM: 2866-017
Montesa Gear Lever - Early Cota 349 and Cappra 250 Models - Left Hand Folding Type Fits early Cota 349 models, not the later Honda MH models. Also correct...
+

off-finrub003
£13.95 (£16.74 inc VAT)
OEM: 134.005
Ossa TR80/303 Cylinder Fin Shock Absorber / Anti Vibration Rubbers - Pack of 4 Correct fitment on Ossa Gripper and 303 models + universal fit as...
+

wtf-clarm137
£17.95 (£21.54 inc VAT)
Honda TLR200 / TLR250 Clutch Actuating Arm Extension / Lightener Lightweight alloy clutch arm extension suitable for use on TLR200, Reflex and TLR250...
+

wtf-pist-ty175
£45.95 (£55.14 inc VAT)
OEM: 443-11636-03-00
Yamaha Piston Kit With Small End Bearing - TY175 / DT175 Models - Standard + Oversize Piston complete with top and second piston rings, gudgeon / wrist...

off-rsprk233
£43.95 (£52.74 inc VAT)
Yamaha TYZ Rear Sprocket - 39T - 520 Chain - Talon Anodised Alloy Chain pitch: 5/8" x 1/4" - 520 chain 6 bolt fitting: 80mm between hole centres ID:...

off-gsprk379-10
£10.95 (£13.14 inc VAT)
Montesa Cota Splined Gearbox Sprocket - 314 and 315 Models - 520 Chain - 10T - Talon Front sprocket suitable for Montesa Cota 314 and 315 models using...
 

wtf-swing124
£8.95 (£10.74 inc VAT)
Yamaha Swinging Arm Protector / Chain Guard - TY125 and TY175 Models Genuine Yamaha rubber chain guard - locates at the axle / spindle end of the swing...
+

wtf-camten127
£19.95 (£23.94 inc VAT)
OEM: 14500-427-000
Honda Cam Chain Tensioner - TLR200, TLR250, RTL250 + XL185/200 Models Correct fitment on all TLR200, TLR250, RTL250, XL185 and XL200 models. Overall...
+

wtf-clarm017
£8.95 (£10.74 inc VAT)
Yamaha Clutch Actuating Arm Extension / Lightener - TY125, TY175, TY200 + Chase TY220 Models Stainless steel clutch arm extension suitable for use on...
+

off-conrod-mt54
£149.95 (£179.94 inc VAT)
Montesa Conrod Kit - 250cc Enduro H7 and Cappra VG Models Circa 1981-85 - Italkit Suitable for 250cc Montesa Cappra VG or Enduro H7 models from 1981...
+

off-gkset485T
£13.95 (£16.74 inc VAT)
Honda TLR200 D/E - Top Engine Gasket Set - Circa 1982-84 Also fits Honda XL185 models from 1979-83.
+

off-glev170
£12.95 (£15.54 inc VAT)
Universal Gear Lever - 140mm Length - 10mm Spline - Straight Type Gear shift lever s uitable  for many Honda, Kawasaki and Suzuki models or universal...
+

off-klev350
£10.95 (£13.14 inc VAT)
Universal Kickstart Lever Assembly With 16mm Spline Chrome plated steel kickstarter suitable for various small capacity Japanese models. Hinged boss with...
+

wtf-cslider-015
£17.95 (£21.54 inc VAT)
Honda Chain Slider / Swinging Arm Protector - TLR200, Reflex and TLR250F Models - Circa 1983-87 Genuine Honda chain slider - locates at the axle end of...
+

wtf-gb-seal012
£1.45 (£1.74 inc VAT)
OEM: 93109-12012-00
Yamaha Gear Selector Outer Cover Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-seal059
£1.45 (£1.74 inc VAT)
OEM: 93104-14059-00
Yamaha Clutch Arm / Push Lever Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

off-bear281H
£14.45 (£17.34 inc VAT)
OEM: 91001-383-003, 91001-383-004, 63/28
Honda Crankshaft Bearing - TL125S, TLR200 and XL100, XL125, XL185 and XL250 Models Crankshaft main bearing as used on many Honda models including TL125S...
+

wtf-spkwash110-hon
£2.45 (£2.94 inc VAT)
Honda Front Sprocket Retaining Tab Washer - TLR200, TL125K, TL125S and XL Models Front sprocket splined bolt-on plate used to retain the gearbox...
 

wtf-gb-seal060
£1.45 (£1.74 inc VAT)
OEM: 93101-12060-00
Yamaha Gear Selector Shaft Inner Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

off-gsprk377
£24.95 (£29.94 inc VAT)
Yamaha Gearbox Sprocket - TY50 and TY80 Models - 420 Chain - 11T Front sprocket suitable for all Yamaha TY50 and TY80 models using standard 420 chain....

off-glev010
£12.95 (£15.54 inc VAT)
Universal Gear Lever - 145mm Length - 10mm Spline - Slight Bend Gear shift lever suitable for many Honda, Kawasaki and Suzuki models or universal fit....
+

wtf-filt421
£4.95 (£5.94 inc VAT)
Honda Oil Filter Screen - All TL125, TLR200, TLR250 and RTL250 Models Wire mesh / gauze oil strainer - locates in the crankcase secured with a spring and...
+

wtf-bushset126
£10.95 (£13.14 inc VAT)
OEM: 41241-307-010
Honda Rear Sprocket Damper Bush Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four metalastic rear sprocket bushes - locate in the rear hub to...
+

off-klev345
£18.95 (£22.74 inc VAT)
Yamaha Kickstart Lever Assembly - DT125 and DT175 Twinshock Models Circa 1974-77 Forged steel kickstarter to fit pre 1978 DT175 + DT125 and Enduro twin...
+

wtf-seal065
£10.95 (£13.14 inc VAT)
OEM: 93102-25061
Yamaha Left Hand Crankshaft Oil Seal - TY125 and TY175 Models Ignition / left hand side crankshaft oil seal as used on all TY125 and TY175 + TY200 and...
+

wtf-bear081
£6.95 (£8.34 inc VAT)
OEM: 93306-20529-00
Yamaha Left Hand Crankshaft Bearing - TY125 and TY175 Models Ignition / left hand side crankshaft main bearing as used on all TY125 and TY175 + TY200 and...
+

wtf-boltset022
£11.95 (£14.34 inc VAT)
Yamaha Engine Bolt Set - TY125, TY175, TY200 + Chase TY220 Models Full set of zinc plated pan head hex socket bolts - 37 pieces. Includes bolts for...
+

wtf-bear082
£6.95 (£8.34 inc VAT)
OEM: 93306-30421-00
Yamaha Right Hand Crankshaft Bearing - TY125 and TY175 Models Drive / right hand side crankshaft main bearing as used on all TY125 and TY175 + TY200 and...
+

wtf-tenpart044-red
£8.95 (£10.74 inc VAT)
Chain Tensioner Block - Enclosed Angled Type - Honda TLR/RTL Models + Universal Use Replacement chain tensioner slipper pad supplied with spacer and a...
+

wtf-glev038
£16.95 (£20.34 inc VAT)
Alloy Gear Lever - Honda RTL250 / TLR Models + Yamaha TY Models - Steel Folding Pedal Forged alloy left hand gear shift lever with steel folding spring...
+

wtf-bear083
£5.95 (£7.14 inc VAT)
OEM: 93306-20458-00
Yamaha Output / Drive Shaft Bearing - TY125 and TY175 Models Sprocket bearing as used on all TY125 and TY175 + TY200 and TY220 Chase models. Deep grooved...
+

wtf-gkset030-full
£14.95 (£17.94 inc VAT)
Full Gasket Set - Yamaha TY175 + TY200 and TY220 Chase Models Complete gasket set - correct fitment on the models listed. All gaskets except the head...
+

off-gkset011F
£10.95 (£13.14 inc VAT)
Yamaha TY50/DT50 - Full Engine Gasket Set - Circa 1977-78
+

wtf-bear084
£5.95 (£7.14 inc VAT)
OEM: 93306-30309-00
Yamaha Clutch Shaft Bearing - TY125 and TY175 Models Clutch shaft bearing as used on all TY125 and TY175 + TY200 and TY220 Chase models. Also suitable...
+

wtf-ckgask-010
£7.95 (£9.54 inc VAT)
OEM: 91302-107-010, 91302-355-000
Honda Flywheel Cover O Ring - Honda TLR200, TLR250, RTL250 + Later TL125 Models Flywheel cover / left hand crankcase square profile O ring seal. As used...
+

wtf-pump048
£4.95 (£5.94 inc VAT)
OEM: 3MT-13116-00, 126-13116-00
Yamaha Oil Pump Stainless Blanking Plate Kit - TY80, TY125, TY175, TY200 + Twinshock TY250 Models Suitable for use on all TY twinshock models. Used to...
+

wtf-ks-lever015
£225.00 (£270.00 inc VAT)
OEM: 24700-ND8-000
Honda Kickstart Lever Assembly - Early RTL250 Models Circa 1985-87 - 15mm Spline Forged steel kickstarter arm and crank boss assembly with 15mm spline....
+

wtf-ks-gear116
£127.95 (£153.54 inc VAT)
Honda Kickstart Gear - TLR200, Reflex, TLR250 and + Later TL125 Models and XL Models 19T clutch mainshaft kick starter gear / drive ratchet. Correct...
+

off-bear051H
£9.95 (£11.94 inc VAT)
OEM: 91001-071-003, 6305
Honda Crankshaft Bearing - TL125K + Early XL100 and XL125 Models Circa 1973-75 Crankshaft main bearing as used on many Honda models including TL125K...
+

wtf-hdgask004
£13.95 (£16.74 inc VAT)
OEM: 12251-KR9-000, 12251-KR9-306, 12191-KR9-000, 12191-KR9-306
Copper Head Gasket and Base Gasket - Honda TLR250 and RTL250 Models 1.2mm solid copper cylinder head gasket + 0.5mm non asbestos gasket paper base...
+

wtf-cambush109
£23.95 (£28.74 inc VAT)
OEM: 12260-437-000
Honda Camshaft Bush - TLR200, TLR250, Early RTL250 + Later TL125 Models Circa 1983 Onwards Correct fitment on TLR200, Reflex, TLR250 and early RTL250...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.