.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

wtf-pump048-gkt
£0.95 (£1.14 inc VAT)
Yamaha Oil Pump Blanking Plate Gasket - TY80, TY125, TY175, TY200 + Twinshock TY250 Models Suitable for use on all TY twinshock models. 0.5mm fibre...
+

off-rub950
£1.45 (£1.74 inc VAT)
Universal Gear Lever Rubber - Yamaha, Honda, Suzuki Type Gear shifter rubber typical of the type used on classic trials and motocross bikes. Length:...
+

wtf-seal042
£1.45 (£1.74 inc VAT)
OEM: 93102-26042-00
Yamaha Drive Shaft / Sprocket Oil Seal - TY125 and TY175 Models Output shaft oil seal as used on many Yamaha models including TY125, TY175 + TY200 and...
+

wtf-seal062
£1.45 (£1.74 inc VAT)
OEM: 93101-17062-00
Yamaha Kickstart Shaft / Clutch Casing Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase...
+

wtf-seal059
£1.45 (£1.74 inc VAT)
OEM: 93104-14059-00
Yamaha Clutch Arm / Push Lever Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-gb-seal012
£1.45 (£1.74 inc VAT)
OEM: 93109-12012-00
Yamaha Gear Selector Outer Cover Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

wtf-gb-seal060
£1.45 (£1.74 inc VAT)
OEM: 93101-12060-00
Yamaha Gear Selector Shaft Inner Oil Seal - TY125 and TY175 Models As used on many Yamaha models including TY125, TY175 + TY200 and TY220 Chase models....
+

off-finrub006
£1.95 (£2.34 inc VAT)
OEM: 116.10-118
Bultaco Cylinder Fin Shock Absorber / Anti Vibration Rubber - Square Barrel Models Correct fitment on air cooled Sherpa, Alpina, Frontera and Pursang...
+

wtf-ks-cover076
£1.95 (£2.34 inc VAT)
Yamaha Kickstart Return Spring Cover Plate - TY125 and TY175 Models Kickstarter spring washer  as used on all TY125 and TY175 + TY200 and TY220 Chase...
+

wtf-spkwash110-hon
£2.45 (£2.94 inc VAT)
Honda Front Sprocket Retaining Tab Washer - TLR200, TL125K, TL125S and XL Models Front sprocket splined bolt-on plate used to retain the gearbox...
 

fk420spring
£2.95 (£3.54 inc VAT)
420 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 420 motorcycle chain. Please note: These will...
+

off-rub000
£2.95 (£3.54 inc VAT)
Universal Kickstart Lever Rubber - Yamaha, Honda, Suzuki Type Kick start rubber rubber typical of the type used on classic trials and motocross bikes....
+

off-ren428-spring
£2.95 (£3.54 inc VAT)
428 Renthal R1 MX Chain Connecting Spring Link - 1/2" x 5/16" Pitch Split/master link for use with 428 Renthal R1 MX Chain - premium quality for trials,...
+

428half-elite-B12
£2.95 (£3.54 inc VAT)
Elite 428 Standard Chain Half / Cranked Link To fit 126SR 1/2" x 5/16" (P x W) standard 428 chain equivalent to Renold 110046. Allows you to make up...
+

fkrivet420
£2.99 (£3.59 inc VAT)
420 Classic Motorcycle Chain Connecting Rivet Link Rivet link for use with standard roller 420 motorcycle chain. Please note: These will only fit...
+

fklinkspr428-B12
£3.45 (£4.14 inc VAT)
428 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 428 motorcycle chain. Regina Classic Chain...
+

off-ren420-spring
£3.45 (£4.14 inc VAT)
420 Renthal R1 MX Chain Connecting Spring Link - 1/2" x 3/16" Pitch Split/master link for use with 420 Renthal R1 MX Chain - premium quality for trials,...
+

off-ren520-spring
£3.45 (£4.14 inc VAT)
520 Renthal R1 MX Chain Connecting Spring Link - 5/8" x 1/4" Pitch Split/master link for use with 520 Renthal R1 MX Chain - premium quality for trials,...
+

off-oilseal432H
£3.45 (£4.14 inc VAT)
OEM: 91201-030-003, 91201-030-005, 91201-030-000
Honda Drive Shaft Oil Seal TL125 and XL Models Counter shaft oil seal as used on many Honda models including TL125 K and S models + XL100, XL125, XL185...
+

off-oilseal818H
£3.45 (£4.14 inc VAT)
OEM: 91206-286-013
Honda Gear Change Spindle Oil Seal - Honda TL125, TLR200 and XL Models Gear shift spindle oil seal as used on many Honda models including TL125 K and S...
+

wtf-spr426
£3.45 (£4.14 inc VAT)
Honda Oil Filter Screen Spring - All TL125, TLR200, TLR250 and RTL250 Models Oil filter screen spring - locates between the filter screen and the drain...
+

fk420half
£3.95 (£4.74 inc VAT)
420 Regina Classic Motorcycle Chain Half Link To fit 125EBSR 1/2" x 3/16" (P x W) standard 420 chain equivalent to Renold 110044. Allows you to make up...
+

428half-reg-B12
£3.95 (£4.74 inc VAT)
428 Regina Classic Motorcycle Chain Half Link To fit 126SR 1/2" x 5/16" (P x W) standard 428 chain equivalent to Renold 110046. Allows you to make up...
+

off-rub003
£3.95 (£4.74 inc VAT)
OEM: 113.016
Bultaco Gear Lever Rubber - Flat Type For Earlier Sherpa and Pursang Models Gear shifter rubber embossed with the Bultaco logo. Length: 34mm Width: 22mm...
+

tenpart3556-C3
£3.95 (£4.74 inc VAT)
OEM: 83-3556, F3556
Triumph/BSA Chain Adjuster Snail Cam - B25, B50 and TR25W and TR5T Models Swinging arm pivot/rear chain tensioner plate as fitted to OIF models from 1971...
+

wtf-cap999H
£3.95 (£4.74 inc VAT)
Unpolished Alloy, OEM: 12361-383-000, 91303-107-000
Honda Rocker Cover Cap / Oil Screen Cap Drain Plug - TL125, TLR200 and TLR250 Models Tappet adjusting hole cap as used on TL125K and TL125S models +...
 

off-c/plate119H
£3.95 (£4.74 inc VAT)
OEM: 22311-107-000, 2231-KN4-680
Honda Clutch Steel Plate - TLR200, TLR250, RTL250, TL125 and XL Models Clutch plain driven plate as used on many Honda models including: TLR200 including...
+

wtf-clplt-104-std
£3.95 (£4.74 inc VAT)
OEM: 22201-166-000, 22201-KB4-670
Honda Clutch Friction Plate - TLR200, TLR250, RTL250, TL125 and XL Models - Standard Clutch friction plate/disk as used on many Honda models including:...
+

520-reg-spring
£4.45 (£5.34 inc VAT)
520 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 520 motorcycle chain. Premium quality - Made...
+

off-rub001
£4.45 (£5.34 inc VAT)
OEM: 75.13-016
Bultaco Gear Lever Rubber - Round Type For Later Sherpa and Pursang Models Gear shifter rubber embossed with the Bultaco logo. Length: 34mm OD: 17.8mm...
+

wtf-spkwash111
£4.45 (£5.34 inc VAT)
Honda Countershaft / Front Sprocket 20mm Spline Washer - TLR200, TLR250 and RTL250 Models Front sprocket splined washer - compatible with Talon gearbox...
+

off-tenpart006
£4.50 (£5.40 inc VAT)
Replacement Universal Chain Tensioner Spring For use with our universal chain tensioners. Overall length: 18cm Genuine Sammy Miller Product -...
+

fkrivet428-B12
£4.95 (£5.94 inc VAT)
428 Regina Classic Motorcycle Chain Connecting Rivet Link Rivet link for use with standard roller 428 motorcycle chain. Premium quality - Made in...
+

oilseal40526
£4.95 (£5.94 inc VAT)
OEM: 40-0025, 40-25
BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket Use in conjunction with the Talon 18T engine sprocket on BSA C15, C25,...
+

off-glev213
£4.95 (£5.94 inc VAT)
Universal Gear Lever Block - Various Sizes to Suit Honda, Kawasaki, Yamaha and Suzuki Bikes Splined block to make your own gear shift lever as required....
 

wtf-pump048
£4.95 (£5.94 inc VAT)
OEM: 3MT-13116-00, 126-13116-00
Yamaha Oil Pump Stainless Blanking Plate Kit - TY80, TY125, TY175, TY200 + Twinshock TY250 Models Suitable for use on all TY twinshock models. Used to...
+

wtf-filt421
£4.95 (£5.94 inc VAT)
Honda Oil Filter Screen - All TL125, TLR200, TLR250 and RTL250 Models Wire mesh / gauze oil strainer - locates in the crankcase secured with a spring and...
+

fk520half
£5.45 (£6.54 inc VAT)
520 Regina Classic Motorcycle Chain Half Link To fit 135RESR 5/8" x 1/4" (P x W) standard 520 chain equivalent to Renold 110054. Allows you to make up...
+

off3-tenpart004-BLK
£5.95 (£7.14 inc VAT)
OEM: 108-16-041
Universal Chain Tensioner Pad - Open Block Type - Black Hard wearing PVC. Length: 60mm Height: 46mm Internal width: 21.4mm Fixing hole centres: 40mm...
+

off-rub002
£5.95 (£7.14 inc VAT)
OEM: 23.12-033
Bultaco Kickstart Lever Rubber - All Models Kick start rubber embossed with the Bultaco logo. Length: 78.5mm OD: 21mm OEM: 23.12-033 Premium quality...
+

off-tenpart004-RED
£5.95 (£7.14 inc VAT)
OEM: 108-16-041
Universal Chain Tensioner Pad - Open Block Type - Red Hard wearing PVC. Length: 60mm Height: 46mm Internal width: 21.4mm Fixing hole centres: 40mm apart...
+

wtf-bear083
£5.95 (£7.14 inc VAT)
OEM: 93306-20458-00
Yamaha Output / Drive Shaft Bearing - TY125 and TY175 Models Sprocket bearing as used on all TY125 and TY175 + TY200 and TY220 Chase models. Deep grooved...
+

wtf-bear084
£5.95 (£7.14 inc VAT)
OEM: 93306-30309-00
Yamaha Clutch Shaft Bearing - TY125 and TY175 Models Clutch shaft bearing as used on all TY125 and TY175 + TY200 and TY220 Chase models. Also suitable...
+

wtf-ks-wash131
£5.95 (£7.14 inc VAT)
Honda Kickstart Spring Retainer - TLR200, TLR250, RTL250 + Later TL125 Models Kickstart spring retaining washer - locates over the kickstart spindle to...
+

wtf-locknut010
£5.95 (£7.14 inc VAT)
Honda Clutch Centre / Oil Filter Rotor Nut - TLR200, TLR250, RTL250 + Later TL125 Models 16mm castellated lock nut with chamfered inside edge. Clutch...
+

off-tenpart001
£6.95 (£8.34 inc VAT)
OEM: 39-20-371
Montesa Cota - Chain Tensioner Block - 242, 304, 307, 330, 335, 349 and 350 Models Chain guide tensioner pad as fitted to many Montesa Cota models. Single...
+

off-tenpart002
£6.95 (£8.34 inc VAT)
OEM: 2120.371
Montesa Cota - Chain Tensioner Block - 74, 123, 247 Models Chain guide tensioner pad as fitted to many Montesa Cota models. Double sided type. Length:...
+

off-tenpart007
£6.95 (£8.34 inc VAT)
Yamaha TY175/TY250 Twinshock Chain Tensioner Pad - Enclosed Block Type An authentic replica of the chain tensioner pad fitted as standard to TY175 and...
+

wtf-bear081
£6.95 (£8.34 inc VAT)
OEM: 93306-20529-00
Yamaha Left Hand Crankshaft Bearing - TY125 and TY175 Models Ignition / left hand side crankshaft main bearing as used on all TY125 and TY175 + TY200 and...
+

wtf-bear082
£6.95 (£8.34 inc VAT)
OEM: 93306-30421-00
Yamaha Right Hand Crankshaft Bearing - TY125 and TY175 Models Drive / right hand side crankshaft main bearing as used on all TY125 and TY175 + TY200 and...
+

wtf-ks-spring038
£6.95 (£8.34 inc VAT)
Yamaha Kickstart Return Spring - TY125 and TY175 Models Kickstarter torsion spring as used on all TY125 and TY175 + TY200 and TY220 Chase models....
+

wtf-ckgask-001
£6.95 (£8.34 inc VAT)
OEM: 11191-NN0-000
Honda Crankcase Halves Gasket - Later RTL250 Models - Circa 1988-89 Inner left and right hand crankcase gasket - correct fitment on RTL250S models circa...
+

wtf-boltset269
£6.95 (£8.34 inc VAT)
OEM: 90128-382-670, 90128-446-770, 90308-382-670
Honda Rear Sprocket Nut and Bolt Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four rear sprocket retaining bolts with flanged nuts. Used in...
+

wtf-ks-collar132
£7.95 (£9.54 inc VAT)
Honda Kickstart Spindle Collar - TLR200, TLR250, RTL250 + Later TL125 Models Kickstart return spring guide - locates inside the spring to ensure its...
+

wtf-ckgask-010
£7.95 (£9.54 inc VAT)
OEM: 91302-107-010, 91302-355-000
Honda Flywheel Cover O Ring - Honda TLR200, TLR250, RTL250 + Later TL125 Models Flywheel cover / left hand crankcase square profile O ring seal. As used...
+

off-g/box-plug001
£8.95 (£10.74 inc VAT)
OEM: 179.11-036, 80.11-036
Bultaco Alloy Gearbox Oil Filler Plug - Alpina, Sherpa T and Pursang Models Overall length: 19.9mm Length UH: 13mm Overall diameter: 22mm Thread: 13mm...
+

chainMTX420
£8.95 (£10.74 inc VAT)
OEM: 110044
Gold Standard Heavy Duty 420 Motorcycle Chain - MTX - 100, 120, 130 or 140 Links Supplied with a connecting spring link. 125EBSR 1/2" x 3/16" (P x W)...

wtf-clarm017
£8.95 (£10.74 inc VAT)
Yamaha Clutch Actuating Arm Extension / Lightener - TY125, TY175, TY200 + Chase TY220 Models Stainless steel clutch arm extension suitable for use on...
+

wtf-swing124
£8.95 (£10.74 inc VAT)
Yamaha Swinging Arm Protector / Chain Guard - TY125 and TY175 Models Genuine Yamaha rubber chain guard - locates at the axle / spindle end of the swing...
+

wtf-tenpart044-blk
£8.95 (£10.74 inc VAT)
Chain Tensioner Block - Enclosed Angled Type - Honda TLR/RTL Models + Universal Use Replacement chain tensioner slipper pad supplied with spacer and a...
+

wtf-tenpart044-red
£8.95 (£10.74 inc VAT)
Chain Tensioner Block - Enclosed Angled Type - Honda TLR/RTL Models + Universal Use Replacement chain tensioner slipper pad supplied with spacer and a...
+

fkchainsss420
£9.95 (£11.94 inc VAT)
OEM: 110044
420 Standard Classic Motorcycle 125EBSR 1/2" x 3/16" Chain - Triple SSS - 100 to 136 Links Supplied with a connecting spring link. 125EBSR 1/2" x 3/16"...

fkchainsss428
£9.95 (£11.94 inc VAT)
OEM: 110046
428 Standard Classic Motorcycle 126SR 1/2" x 5/16" Chain - Triple SSS - 100 to 130 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x...

off-gsprk336
£9.95 (£11.94 inc VAT)
Yamaha Gearbox Sprocket - YZ125, Scorpa SY250, TYZ250 Models - 520 Chain - 10T to 14T Front sprocket suitable for Yamaha YZ125 models using standard 520...

off-bear051H
£9.95 (£11.94 inc VAT)
OEM: 91001-071-003, 6305
Honda Crankshaft Bearing - TL125K + Early XL100 and XL125 Models Circa 1973-75 Crankshaft main bearing as used on many Honda models including TL125K...
+

chainMTX428
£9.95 (£11.94 inc VAT)
OEM: 126SR, 110046
Gold Standard Heavy Duty 428 Motorcycle Chain - MTX - 110, 130 or 140 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x W) standard...

off-tenpart052
£9.95 (£11.94 inc VAT)
OEM: 525-25388-00-00, 525-25389-00-00
Yamaha TY125, TY175, TY200 Snail Cam Chain Adjusters / Chain Pullers Pair of stainless steel left and right hand chain adjusters suitable for the models...
+

wtf-camsprk128
£9.95 (£11.94 inc VAT)
OEM: 14321-440-000
Honda 32T Cam Top Sprocket - TLR200, TLR250, RTL250 + Later TL125 and XL Models Top timing chain sprocket suitable for all TLR200, TLR250, RTL250, XL...
+

wtf-tenpad016
£9.95 (£11.94 inc VAT)
Honda Chain Tensioner Slipper / Pad - TLR200, Reflex and Later TL125 Models Replacement drive chain tensioner slipper pad - locates within the two...
+

off-gkset011F
£10.95 (£13.14 inc VAT)
Yamaha TY50/DT50 - Full Engine Gasket Set - Circa 1977-78
+

off-gsprk379-10
£10.95 (£13.14 inc VAT)
Montesa Cota Splined Gearbox Sprocket - 314 and 315 Models - 520 Chain - 10T - Talon Front sprocket suitable for Montesa Cota 314 and 315 models using...
 

off-klev350
£10.95 (£13.14 inc VAT)
Universal Kickstart Lever Assembly With 16mm Spline Chrome plated steel kickstarter suitable for various small capacity Japanese models. Hinged boss with...
+

wtf-ks-spring130
£10.95 (£13.14 inc VAT)
Honda Kickstart Return Spring - TLR200, TLR250, RTL250 + Later TL125 Models Correct fitment on all TLR200, Reflex, TLR250 and RTL250 models + later...
+

wtf-bushset126
£10.95 (£13.14 inc VAT)
OEM: 41241-307-010
Honda Rear Sprocket Damper Bush Set - TL125 and TLR200 Models Circa 1973 Onwards Set of four metalastic rear sprocket bushes - locate in the rear hub to...
+

wtf-seal065
£10.95 (£13.14 inc VAT)
OEM: 93102-25061
Yamaha Left Hand Crankshaft Oil Seal - TY125 and TY175 Models Ignition / left hand side crankshaft oil seal as used on all TY125 and TY175 + TY200 and...
+

fkgk660
£11.95 (£14.34 inc VAT)
Ossa MAR - 250cc - Engine Gasket Set 1973 Onwards Ossa Mick Andrews Replica, 250cc, Engine Gasket Set from 1973 Onwards Includes gaskets as shown in the...
+

wtf-boltset022
£11.95 (£14.34 inc VAT)
Yamaha Engine Bolt Set - TY125, TY175, TY200 + Chase TY220 Models Full set of zinc plated pan head hex socket bolts - 37 pieces. Includes bolts for...
+

off-glev010
£12.95 (£15.54 inc VAT)
Universal Gear Lever - 145mm Length - 10mm Spline - Slight Bend Gear shift lever suitable for many Honda, Kawasaki and Suzuki models or universal fit....
+

off-glev170
£12.95 (£15.54 inc VAT)
Universal Gear Lever - 140mm Length - 10mm Spline - Straight Type Gear shift lever s uitable  for many Honda, Kawasaki and Suzuki models or universal...
+

wtf-hdgask003
£12.95 (£15.54 inc VAT)
OEM: 12251-446-776, 12251-446-306
Copper Head Gasket - Honda TLR200 D/E + Reflex G/H Models - Circa 1983-87 1.2mm solid copper cylinder head gasket suitable for all TLR200 models. Honda...
+

off-tenpart003
£13.95 (£16.74 inc VAT)
Universal Chain Tensioner Roller Pad - Ball Race Roller Bearing Type Nylon chain tensioner roller with integral bearing. OD: 50mm ID: 7.9mm Internal...
+

off-glev220
£13.95 (£16.74 inc VAT)
Universal Gear Lever - 110mm Length - 10mm Spline - Folding Type Gear shift lever suitable for Honda CRF450 + Yamaha IT 125/175/250cc and YZ 80/ 125...
+

fkgk144
£13.95 (£16.74 inc VAT)
Bultaco Sherpa - 325cc - Engine Gasket Set 1976 Onwards
+

fkgk143
£13.95 (£16.74 inc VAT)
Bultaco Sherpa - 250cc - Engine Gasket Set From 1975-82 Bultaco Sherpa 250, Engine Gasket Set From 1975 to 1982 Includes gaskets as shown in the photos.
+

off-gkset330
£13.95 (£16.74 inc VAT)
Honda TL125 K Top Engine Gasket Set - Circa 1973 Also fits Honda CB125 models. Gasket set includes: Cylinder base gasket Cylinder head gasket 'O' rings...
+

off-gkset485T
£13.95 (£16.74 inc VAT)
Honda TLR200 D/E - Top Engine Gasket Set - Circa 1982-84 Also fits Honda XL185 models from 1979-83.
+

off-finrub003
£13.95 (£16.74 inc VAT)
OEM: 134.005
Ossa TR80/303 Cylinder Fin Shock Absorber / Anti Vibration Rubbers - Pack of 4 Correct fitment on Ossa Gripper and 303 models + universal fit as...
+

wtf-hdgask004
£13.95 (£16.74 inc VAT)
OEM: 12251-KR9-000, 12251-KR9-306, 12191-KR9-000, 12191-KR9-306
Copper Head Gasket and Base Gasket - Honda TLR250 and RTL250 Models 1.2mm solid copper cylinder head gasket + 0.5mm non asbestos gasket paper base...
+

off-bear281H
£14.45 (£17.34 inc VAT)
OEM: 91001-383-003, 91001-383-004, 63/28
Honda Crankshaft Bearing - TL125S, TLR200 and XL100, XL125, XL185 and XL250 Models Crankshaft main bearing as used on many Honda models including TL125S...
+

off-glev195
£14.95 (£17.94 inc VAT)
Universal Gear Lever - 100mm Length - 10mm Spline - Folding Type Gear shift lever s uitable  for many Honda, Kawasaki and Suzuki models or universal...
+

fkgk141
£14.95 (£17.94 inc VAT)
Bultaco Sherpa - 250cc - Engine Gasket Set From 1968-74 Bultaco Sherpa 250, Engine Gasket Set From approx 1968 to 1974 Includes gaskets as shown in the photos.
+

fkgk142
£14.95 (£17.94 inc VAT)
Bultaco Sherpa - 325cc - Engine Gasket Set - Circa 1968-74 Bultaco Sherpa 325, Engine Gasket Set - Circa 1968 to 1974 Includes gaskets as shown in the photos.
+

off-tenpart009
£14.95 (£17.94 inc VAT)
Honda TL200 Alloy Snail Cam Chain Adjusters - 12mm Spindle Pair of anodised silver left and right hand chain tensioners. Embossed with increment...
+

wtf-gkset030-full
£14.95 (£17.94 inc VAT)
Full Gasket Set - Yamaha TY175 + TY200 and TY220 Chase Models Complete gasket set - correct fitment on the models listed. All gaskets except the head...
+

fkgk431
£15.95 (£19.14 inc VAT)
Montesa Cota 348 310cc - Engine Gasket Set - Circa 1976-77 Includes gaskets as shown in the photos Made in England
+

off-tenpart008
£15.95 (£19.14 inc VAT)
Universal Alloy Snail Cam Chain Adjusters - 12mm, 15mm or 17mm Spindle Pair of anodised silver left and right hand chain tensioners. Embossed with the...

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.