.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Trials Make Test

Search results for "BOLT"Products found: 821

silencer-clamp
£7.95 (£9.54 inc VAT)
OEM: 70-2271, 70-3767, 70-5874, 70-7512
Universal Exhaust Silencer Clamp - Chrome: Clamps the Silencer on to the Exhaust Pipe. Complete with bolt, spring washer and nut. Sizes available:...

amalmk1-gk-std
£3.45 (£4.14 inc VAT)
OEM: 622/208, 622/073, 622/101, 13/163, 622/151, 622/082
Amal Concentric 600/900 Series Mark I Carburetter Gasket Set Gaskets and washers to open and clean or repair any Amal 600 or 900 series MK1 carburettor....
+

fkwash116-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/4" Gas Suit 1/4" Gas thread for fuel taps. Hole id 1/2" Supplied as 10 washers
+

lamp036-A2
£7.95 (£9.54 inc VAT)
OEM: LU53454, L564, E66, 19-1014, LU564
Rear Lamp Assembly - Lucas 564 Type Complete stop/tail light as fitted to  various classic bikes - BSA, Triumph, Norton, etc. circa 1955-70. Supplied...
+

fkflatwashers
£3.95 (£4.74 inc VAT)
Assorted Imperial Size Flat Washers Bag of approx 60 washers, hole sizes may include: 3/16", 3/8", 7/16", 1/2", 5/16", 1/4"
+

nut8133-B14
£0.75 (£0.90 inc VAT)
OEM: 70-8133, E8133, 57-0224, T224, S1-51, 02-0049
5/16" Nut - CEI Thread Universal uses. 5/16" x 26 TPI. Width: 1/4" (6.3mm) OEM: 70-8133, E8133, 57-0224, T224, S1-51, 02-0049, 2-49
+

tank0260-E9
£1.95 (£2.34 inc VAT)
OEM: 83-0260, 42-8012, 42-8017
Fuel Tank Centre Bolt Mounting Rubber - Triumph OIF + BSA A and B Group + A50 and A65 Models Correct fitment on Triumph and BSA models with a raised...
+

nut1302-B14
£0.95 (£1.14 inc VAT)
OEM: 14-1302, 21-1852, S1852
5/16" UNF Self-Locking Cleveloc Nut - Thin Type 5/16" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1302, 21-1852, S1852
+

nut1303-B14
£1.45 (£1.74 inc VAT)
OEM: 14-1303, 06-3024
3/8" UNF Self-Locking Cleveloc Nut - Thin Type 3/8" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1303, 06-3024
+

fkspringwash
£2.95 (£3.54 inc VAT)
Assorted Imperial Size Spring Washers Bag of approx 60 washers, hole sizes include:  3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
+

nut036-B14
£0.75 (£0.90 inc VAT)
OEM: P0172A, S1-52, 21-7052, PO172A, PO-172A, 02-0046
Triumph Twin - Cylinder Base Nut - P0172A Also to secure top head stay to engine. 3/8" CEI OEM: P0172A, S1-52, PO172A, PO-172A, 02-0046
+

gask766
£1.25 (£1.50 inc VAT)
Magneto Triangle Gasket Suit most 3 bolt fixing Magnetos, such as AJS, Matchless, and other K2f magnetos OEM: 67-1258
+

wash0239
£0.95 (£1.14 inc VAT)
OEM: 40-0239, NE507, 99-3540
Triumph / BSA Fibre Washer - Chaincase Inspection Plug + Gearbox Filler Cap - 1+1/4" Various uses on many single and twins. OD: 1+1/4" (31mm) ID: 1"...
+

wash2330
£0.25 (£0.30 inc VAT)
OEM: 60-2330, 60-4247, 54-0055, D4247, D2330
5/16" Plain Washer - Thin Type  - 1/16" Thickness ID: 1/2" (12.8mm) OD: 5/8" (15.7mm) Thickness: 1/16", 0.05" (1.2mm) OEM: 60-2330, 60-4247, 54-0055,...
+

off-rsprk242/420
£39.95 (£47.94 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 420 Chain Rear Sprocket - From 54 to 68T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

fkwash117-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 3/8" Gas Suit 3/8" Gas thread for fuel taps. Hole id 5/8" Supplied as 10 washers
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

stand-bolt515-E2
£4.95 (£5.94 inc VAT)
OEM: 82-7021, F7021, 14-1303, 14-0703
Triumph Side Stand Pivot Bolt + Lock Nut - 500/650/750cc Twins and Triples From 1967 Onward Prop stand swivel pin and thin self locking Cleveloc nut....
+

nut0879-B14
£1.25 (£1.50 inc VAT)
OEM: 82-0879, F879, GS662, 60-4264, 75-0053
1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting + Other Uses Used extensively on many Triumph unit models. Rocker box stud nut on...
+

fkwash115-F3
£2.95 (£3.54 inc VAT)
Fibre Washers - 10 x 1/8" Gas Suit 1/8" Gas thread for fuel taps. Hole id 3/8" Supplied as 10 washers
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

washer1880
£0.85 (£1.02 inc VAT)
OEM: 82-1880, F1880
Triumph Copper Sealing Washer - 82-1880 Used in various places on Triumph engines, including the sump bolt washer. OEM: 82-1880, F1880
+

stand700w
£37.95 (£45.54 inc VAT)
9" Universal Side Stand - Clamps to Frame - To Suit Various Frame Sizes Prop / kick stand suitable for various marques and models. Cast iron, finished in...

washer4004-C8
£1.45 (£1.74 inc VAT)
OEM: 97-4004, H4004
Triumph/BSA Conical Forks Dowty Washer - Many OIF Models from 1971 Onwards Single fork bolt bonded sealing washer. Used to seal the bottom bolt or cap...
+

off-stand001
£18.95 (£22.74 inc VAT)
Universal Side Stand / Prop Stand - Trials, Motocross and Lightweight Models - Various Sizes Complete side stand assembly with spring and clamp on lug....

wash7971
£0.75 (£0.90 inc VAT)
OEM: 29-7971, 82-9070, F9070
BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles Fibre washer locates between the oil tank filter and oil feed pipe/banjo....
+

thread-gauge
£5.45 (£6.54 inc VAT)
Screw Thread pitch Gauge - Imperial & Metric 0.25 - 6mm 4 - 62BSW 52 leaves of measurement variations Useful tool to check the thread TPI on your nuts...
+

nut1310-B14
£1.75 (£2.10 inc VAT)
OEM: 70-1310, E1310, 82-1008, F1008
Triumph Nut - 5/16" x 26TPI - Oil Block to Crankcase Unit Twins + Other Uses 5/16" x 26TPI  small hexagon thin wall nut. OEM: 70-1310, E1310,  82-1008,...
+

spoke-weight-250_16g-C12
£1.45 (£1.74 inc VAT)
OEM: 37-3969, W3969, 42-5873
16g Spoked Wheel Balance Weight Suitable For .250" 1/4" Nipples Non lead spoke balance weights suitable for 8 or 10 gauge spokes using .250" nipples....
+

fkclutch116-B23
£2.45 (£2.94 inc VAT)
OEM: 57-0423A, 57-4754, 42-3189, T4754, T423A
Triumph/BSA Clutch Spring Bolt - Pre Unit and Unit Twins - 3 or 4 Spring Clutch Clutch spring bolt to fit many Triumph 350/500/650/750cc twins + later...
+

wash2184
£0.95 (£1.14 inc VAT)
OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213
Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses  As used extensively on various unit models - cylinder head bolts, frame parts + universal...
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

off-pegs003
£39.00 (£46.80 inc VAT)
Universal Trials Footrests and Mounting Lugs - Weld On Type Designed in association with Sammy Miller these footpegs are wider and provide better grip...
+

bolt1062-C8
£0.45 (£0.54 inc VAT)
OEM: 97-1062, H1062
Fork Restrictor Rod Bolt Washer - Triumph - 97-1062 Fit various Triumph models, secure the restrictor rod inside the stanchion. Bolt also available, see...
+

wash1575-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1575, 40-0158, E1575, 40-158
Triumph/BSA Rocker Spindle Thrust Washer - Various Models As used on many BSA models including A7, A10,  A50, A65, B25, B44, B40 and C15. Plus...
+

off-pegs006
£66.95 (£80.34 inc VAT)
Yamaha TY250 Twinshock Footrests, Spindle and Brackets - Bolt On Type Designed in association with Sammy Miller these footpegs will bolt to the original...
+

off-pegs001
£46.95 (£56.34 inc VAT)
Yamaha TY175 Trials Footrests and Brackets - Bolt On Type Designed in association with Sammy Miller these footpegs will bolt to the original mounting on...
+

swg012
£60.00 (£72.00 inc VAT)
OEM: 39595, 19-1333, 54033667, 54340882, 062044
Triumph/BSA/Norton Left Hand Indicator Switch Assembly - 650/750cc Models + Unit Singles - Circa 1971-75 High quality authentic replica of the Lucas...
+

bear9-07v
£9.95 (£11.94 inc VAT)
OEM: 42-5819, 37-0653, W653
Rear Wheel bearing Kit - Triumph 350/500 Unit twins, Pre Unit twins, Unit T120/TR6, T150 Spool Hub with bolt on sprocket & drum. - This is for the rear...
+

mirr651-G13
£13.95 (£16.74 inc VAT)
Chrome Bar End Motorcycle Mirror Fits 7/8" handlebars, arm folds in to allow getting the bike into tight spaces. Essential equipment for looking at who...
+

hbolt1580-E12
£0.75 (£0.90 inc VAT)
OEM: 97-1580, H1580
Triumph/BSA Handlebar P Clamp Rubber Buffer Washer - 500/650/750cc Models Rubber buffer washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...
+

wash2441
£0.95 (£1.14 inc VAT)
OEM: 70-2441, 60-7132, E2441, D7132
1/4" (6.35mm) Annealed Copper Washer - Various Applications ID: 1/4" (6.35mm) OD: 7/16" (11mm) OEM: 70-2441, 60-7132, E2441, D7132
+

spoke-weight-250-23g-C12
£1.75 (£2.10 inc VAT)
OEM: 37-3970, W3970, 42-5875
23g Spoked Wheel Balance Weight Suitable For .250" 1/4" Nipples Non lead spoke balance weights suitable for 8 or 10 gauge spokes using .250" nipples....
+

lamp033-A2
£10.95 (£13.14 inc VAT)
OEM: 53269, LU53269, L525
Rear Lamp Assembly - Lucas 525 Type Complete stop/tail light as fitted to  various classic bikes - BSA, Triumph, Norton, etc. circa 1953-55. Supplied...
+

bolt-ds57-B19
£1.45 (£1.74 inc VAT)
OEM: DS57, DS-57, 82-9019, F9019
Triumph Domed Head Bolt - Various Models and Applications to 1968 - DS57 As used extensively on Triumph pre unit and unit models up to 1968. Correct...
+

amalmk1-gk-amal
£4.95 (£5.94 inc VAT)
OEM: 622/208, 622/073, 622/101, 13/163, 622/151, 622/082
Amal Concentric 600/900 Series Mark I Carburetter Gasket Set Gaskets and washers to open and clean or repair any Amal 600 or 900 series MK1 carburettor....
+

tapp0200H-B18
£2.45 (£2.94 inc VAT)
OEM: 97-0200, H200
Triumph Tappet Guide Block Set Bolt - 350/500/650/750cc Models Pre-unit and unit models including 3TA, 5T, 6T, TR5, 5TA, T100, T110, T120, T140. OEM:...
+

nut176-B14
£0.35 (£0.42 inc VAT)
OEM: 14-1901, 60-2320
1/4" UNF - Hexagonal Nut - Nyloc Universal Nut OEM: 14-1901, 60-2320
+

off-pegs002
£96.00 (£115.20 inc VAT)
Triumph Tiger Cub Trials Footrests / Rear Brake Arm and Pedal Kit - Bolt On Type Designed in association with Sammy Miller this footrest kit replaces the...
+

wash4260
£0.25 (£0.30 inc VAT)
OEM: 60-4260, D4260, 60-2428, D2428, 24-8784, 37-2320, W2320, 54-8003, S26-3
Triumph / BSA - 5/16" Spring Washer - Various Uses On Pre Unit and Unit Models As used extensively on both pre unit and unit models + universal use as...
+

nut5102-B14
£0.35 (£0.42 inc VAT)
OEM: 21-5102, 02-2395, 02-0051, 70-8101, E8101
1/4" x 26 BSF Nut - Various Uses on Pre Unit and Unit Triumph, BSA and Other Models Used extensive for many applications - kickstart, frame, seat...
+

pegs028
£41.95 (£50.34 inc VAT)
OEM: 82-9369, 82-5552, 82-4327, F9369, F5552, F4327
Triumph Pillion Footrest Assemblies - Late Pre Unit + 500/650cc Unit Twins, T150 and T20 Models - Circa 1959-73 Pair of rear foot pegs with pedals,...
+

nut-2BA-B14
£0.45 (£0.54 inc VAT)
OEM: 82-4717, F4717, 82-3799, F3799, 21-5161, S5161
2BA Nut - Triumph Swinging Arm Spindle Rod + Various Uses Locknut for swinging arm end cap retaining pin - correct fitment on: Pre unit 5T, T100, TR5,...
+

nut0103-B14
£0.95 (£1.14 inc VAT)
OEM: 37-0103, W103, 40-3226
1/4" x 26 CEI Nut - Various Uses on Pre Unit and Unit Triumph and BSA Models Used extensively for many applications including cylinder head, manifold...
+

brk1406/265Gt
£19.95 (£23.94 inc VAT)
OEM: 37-1406, 37-1407, W1406, W1407, W93, 37-0093
Triumph Front/Rear Brake Shoes - 7" SLS - Pre Unit and Unit Models - Circa 1946-74 - Pattern / Newfren / Ferodo Correct fitment for: Front 7" full width...
 

wash9554
£0.35 (£0.42 inc VAT)
OEM: 70-9554, E9554
Triumph Intake Manifold Carburettor Insulating Rubbber Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from...
+

wash1574-B13
£1.45 (£1.74 inc VAT)
OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103
Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

fksecbolt52-C12
£4.95 (£5.94 inc VAT)
Security Bolt - Motorcycle Tyre Rim Size 2.15 - WM3 Suit tyre sizes 400 - 450 Tyre clamp, wheel bolt, wheel rim clamp, trial tyre clamp, rim lock Rubber...
+

amal236
£3.95 (£4.74 inc VAT)
OEM: 622/086
Float Chamber and Top Screws (set of 4) For AMAL 600 and 900 Carburetters Allen bolts, comes with Allen key. OEM: 622/086
+

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

bolt1070-C8
£2.95 (£3.54 inc VAT)
OEM: 97-1070, H1070, 42-5084
Fork Axle Cap Bolt - Triumph 350, 500 and 650cc - 97-1070 Triumph Fork Axle Cap Bolt for 3TA, 5TA, T100, 6T, T110, TR6, T120 models. Also some BSA models...
+

wash8343
£0.75 (£0.90 inc VAT)
OEM: 42-8343
Fibre Washer - 1+1/4" - BSA Oil Tank Filter Washer + Universal Uses Correct part for BSA A & B Models, C10L, C12 - oil tank filter washer OD: 1+1/4"...
+

bolt3097-E2
£4.45 (£5.34 inc VAT)
OEM: 82-3097, F3097, 40-4733
Triumph/BSA Side Stand Swivel Pin / Pivot Bolt - Pre Unit and Unit Models Circa 1950-70 Correct fitment to mount the prop stand on models with a threaded...
+

fkcoil68-A16
£4.75 (£5.70 inc VAT)
Coil Clamp Small 41mm Bolt hole centres 20mm apart
+

nut170-B14
£0.40 (£0.48 inc VAT)
OEM: 14-1203
3/8" UNF Self-Locking Metal Cleveloc Nut - Standard Height Used extensively on many Triumph and BSA unit models from 1968 onwards. OD: 5/8" (15.2mm)...
+

fkcoil371-A16
£32.95 (£39.54 inc VAT)
Twin Lead Ignition Coil 12 volt As fitted as OEM on early Japanese bikes with points ignition. Can also be used with Electronic Ignition Kits. Fixing...
+

sump-bolt-washer-set-B3
£3.45 (£4.14 inc VAT)
OEM: 31-222, 31-0222
BSA Alloy Sump Plate Securing Bolts - Non Standard To replace existing studs in crankcase, to allow fitment of the thicker cast-alloy or billet-alloy sump...
+

amal376/092
£1.05 (£1.26 inc VAT)
OEM: 376/092
Amal Carb Fuel Banjo Bolt Fibre Washer - 375, 376, 389 Monobloc Carburettors Fits 375, 376 and 389 Monobloc Carburettors. OEM: 376/092
+

off-rsprk242/428
£43.95 (£52.74 inc VAT)
OEM: 90-6240, 90-6234, 37-0984, 37-1076, 37-1078, W1076, W1078
Triumph Tiger Cub/BSA Bantam - 428 Chain Rear Sprocket - From 54 to 66T - Talon Anodised Alloy These rear sprockets fit the T section Tiger Cub, Bantam...

swg019
£60.00 (£72.00 inc VAT)
OEM: 39596, 19-1332, 54033666, 54340883, 062043
Triumph/BSA/Norton Right Hand Lighting Switch Assembly - 650/750cc Models + Unit Singles - Circa 1971-73 High quality authentic replica of the Lucas...
+

nut0302-B14
£0.45 (£0.54 inc VAT)
OEM: 14-0302
5/16" UNF - Plain Hexagonal Nut - 14-0302 Used extensively on many Triumph and BSA unit models from 1969 onwards. Crankcase studs, fork end caps, frame...
+

amal376/091
£2.65 (£3.18 inc VAT)
OEM: 376/091
Amal Carb Fuel Banjo Retaining Bolt - 375, 376, 389 Monobloc Carburettors Fits 375, 376 and 389 Monobloc Carburettors. Genuine Amal part - made in...
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

off-bar003
£61.95 (£74.34 inc VAT)
Renthal Braced Alloy Trials Handlebars - 7/8" With 4.5", 5", 5.5" or 6" Rise - Silver Renthal manufacture their bars to the highest standard to meet the...

amal622/078
£2.95 (£3.54 inc VAT)
OEM: 622/078, 99-0517
Amal Carb Fuel Banjo Retaining Bolt - 600 and 900 Concentric Carburettors Fits 600/900 Series and Mark II Concentric Carburettors. OEM: 622/078, 99-0517
+

nut-DS47-B14
£1.75 (£2.10 inc VAT)
OEM: DS47, DS-47
7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

DS287
£394.95 (£473.94 inc VAT)
Hinckley Triumph Thunderbird 900 Premium 'Browning' Silencers A pair of Browning Silencers Kit - convert your modern Hinckley Thunderbird to that...

hbolt1529-E12
£1.10 (£1.32 inc VAT)
OEM: 97-1529, H1529
Triumph/BSA Handlebar P Clamp Hemispherical Washer  - 500/650/750cc Models Hemispherical domed washer for use with handlebar eyebolt 97-1523 or...
+

clip100-F3
£1.75 (£2.10 inc VAT)
OEM: 83-1615
Breather Hose Clip 'D' Shape (1971-) - 83-1615 As fitted on T120/TR6/T140 Oil in frame models. Bolt hole = 5mm OEM: 83-1615, F11615
+

wash9555
£0.95 (£1.14 inc VAT)
OEM: 70-9555, E9555
Triumph Intake Manifold Carburettor Cupped Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from 1970-78....
+

wash3096-E2
£0.95 (£1.14 inc VAT)
OEM: 82-3096, F3096, 40-4734
Triumph/BSA Side Stand Swivel Pin Tab Washer - Pre Unit and Unit Models Circa 1950-70 For use with swivel pin to mount the prop stand on models with a...
+

nut0379-B14
£1.45 (£1.74 inc VAT)
OEM: 97-0379, H379
3/8" x 26 CEI Nut - Top Yolk Seated Nut - Pre Unit and Unit Models Circa 1946-68 As used on various Triumph models: T op yolk pinch bolt nut on pre unit...
+

wash7518
£0.15 (£0.18 inc VAT)
OEM: 66-7518
1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...
+

bolt016-B19
£0.45 (£0.54 inc VAT)
OEM: T2703, 57-2703
1/4" BSF 26TPI - 3/4" Hexagonal bolt - Set Screw Gear change lever bolt OEM: T2703, 57-2703
+

washer4262
£0.45 (£0.54 inc VAT)
OEM: 60-4262, PT104B, D4262
Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...
+

wheel1747-C14
£4.45 (£5.34 inc VAT)
OEM: 82-1747, F1747
Triumph Rear Wheel Spindle Nut - Bolt On Hub - 350/500/650/750cc Models Correct fitment on many pre unit and unit models with bolt-on hubs. Including,...
+

wash1612
£0.15 (£0.18 inc VAT)
OEM: 70-1612, E1612, 70-2312, E2312
Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...
+

nut-DS48-B14
£1.95 (£2.34 inc VAT)
OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753
1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

nut2016-B14
£3.95 (£4.74 inc VAT)
OEM: 21-2016, S2016, 60-3761, D3761, 21-0549, S549
Triumph Con Rod Big End Nut - Unit 650cc Twins + T150, TR25W and BSA B25 Models - Circa 1969-73 Self locking connecting rod nut - correct fitment on T120,...
+

wash1330-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1330, 40-0157, E1330, 40-157
Triumph / BSA Rocker Spindle Thrust Washer - Various Pre Unit and Unit Models Correct fitment on pre unit and unit models - singles, twins and triples...
+

nut034-B14
£0.45 (£0.54 inc VAT)
1/4" CEI 26TPI - Hexagonal Nut Universal Nut
+

unf-nut164-B14
£0.35 (£0.42 inc VAT)
OEM: 14-0304
7/16" UNF - Hexagonal Nut Universal Nut OEM: 14-0304
+

nut161-B14
£0.35 (£0.42 inc VAT)
OEM: 14-0301, 03-3057, 06-0862
1/4" UNF - Plain Hexagonal Nut - 14-0301 Hexagonal nut suitable for chain adjusters + universal use. OD: 7/16" (11mm) Height: 1/4" (5.6mm) Thread: 1/4"...
+

foot-rest004-C10
£16.95 (£20.34 inc VAT)
Pillion Footrests - Universal Pair of footrests complete with rubbers Footrests 4" Bolt diameter 3/8" Rubber diameter 1+3/8" Bracket length 4"...
+

nut057H-B18
£2.75 (£3.30 inc VAT)
OEM: 21-0544, S544
Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544 UNF Dome Head Nut 5/16" (Chrome plated) OEM: 21-0544, S544
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.