Search results for "BOLT"

CODE: bolt736H-B19

Triumph T140 Cylinder Head Stud - 21-2201

£5.95 (£7.14 inc VAT)

OEM: 21-2201

Triumph T140 Cylinder head stud (outer 3/8" Stud) OEM: 21-2201

Quantity:

+ −

CODE: bolt735H-B19

Triumph T140 Cylinder Head Stud - 21-2200

£3.95 (£4.74 inc VAT)

OEM: 21-2200

Triumph T140, Cylinder head stud (centre 5/16" stud) OEM: 21-2200

Quantity:

+ −

CODE: bolt044-B19

Triumph cylinder head stud - 70-7996

£2.90 (£3.48 inc VAT)

OEM: 70-7996

Triumph cylinder head stud OEM: 70-7996

Quantity:

+ −

CODE: bolt055-B19

Triumph Cylinder Base Stud - 650/750cc Models From 1969 Onwards

£1.95 (£2.34 inc VAT)

OEM: 21-1865, S1865

Triumph Cylinder Base Stud - 650/750cc Models From 1969 Onwards Correct fitment on Triumph T120, TR6 and T140, TR7 models. 3/8-24/16 x 1 3/4" UNC/UNF...

Quantity:

+ −

CODE: bolt1309-C8

BSA Fork Drain Screw - 02-1309

£0.45 (£0.54 inc VAT)

OEM: 02-1309

BSA Fork Drain Screw - 02-1309 Single Screw for fork oil drain, to suit many BSA forks. OEM: 02-1309

Quantity:

+ −

CODE: bolt3894-C8

Fork Lower Oil Drain Screw - Triumph - 97-3894

£0.40 (£0.48 inc VAT)

OEM: 97-3894, H3894

Fork Lower Oil Drain Screw - Triumph - 97-3894 Fit various Triumph models, to drain the fork oil from the leg. Normally uses a washer as well, which we...

Quantity:

+ −

CODE: bolt992-B19

Triumph 3TA, 5TA Bottom Engine Stud - 70-3812

£6.95 (£8.34 inc VAT)

OEM: 70-3812, E3812

Triumph 3TA, 5TA Bottom Engine Stud (1955-60) OEM: 70-3812, E3812

Quantity:

+ −

CODE: bolts1540-B19

Triumph Rocker Box Stud - Fits Rocker Box and Pre Unit Sump Plate

£2.25 (£2.70 inc VAT)

OEM: 70-1540

Triumph Rocker Box Stud - Fits Rocker Box and Pre Unit Sump Plate Coarse thread to screw into the rocker box, and fine thread for the nut. OEM: 70-1540

Quantity:

+ −

97-1071 - riumph Fork Drain Screw - 500/650cc Pre OIF

CODE: bolt1071-C8

Triumph Fork Drain Screw - 500/650cc Pre OIF

£2.45 (£2.94 inc VAT)

OEM: 97-1071

Triumph Fork Drain Screw - 500/650cc Pre OIF Single Screw for fork oil drain, to suit many Triumph forks. OEM: 97-1071

Quantity:

+ −

CODE: bolts0143-B18

BSA Short Rocker Box Stud - BSC, BSF - A50, A65 - 1962-70

£3.45 (£4.14 inc VAT)

OEM: 68-0143

BSA Short Rocker Box Stud - BSC, BSF - A50, A65 - 1962-70 Length: 1+1/2" (38mm) - BSC and BSF with a 1/4" (6mm) diameter OEM: 68-0143

Quantity:

+ −

14-6608 - Triumph Chaincase Timing Cover Cheese Head Screw

CODE: bolt6608-B13

Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards

£1.45 (£1.74 inc VAT)

OEM: 14-6608

Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards Length 1" x 1/4'' UNC thread Made in England OEM: 14-6608

Quantity:

+ −

70-7354, E7354 - BSA/Triumph Timing Points Cover Screw

CODE: bolt7354-B13

BSA/Triumph Timing Points Cover Countersunk Screw - Various Models

£0.75 (£0.90 inc VAT)

OEM: 70-7354, E7354

BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...

Quantity:

+ −

CODE: bolt3767-B13

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59

£5.95 (£7.14 inc VAT)

OEM: 82-3767, F3767

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...

Quantity:

+ −

CODE: bolt6505-B14

1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use

£0.45 (£0.54 inc VAT)

OEM: 14-6505

1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use Flat head slotted screw as used on T100 models from 1969 onwards: Gearbox...

Quantity:

+ −

CODE: bolts2980t-B19

Triumph Rocker Box Stud - 70-2980

£2.25 (£2.70 inc VAT)

OEM: 70-2980, E2980

Triumph Rocker Box Stud - 70-2980 Coarse thread to screw into the rocker box, and fine thread for the nut. OEM: 70-2980, E2980

Quantity:

+ −

CODE: bolts2980b-B19

BSA Engine Stud - 31-222

£2.25 (£2.70 inc VAT)

OEM: 31-222, 31-0222, 67-0280, 70-2980

BSA Engine Stud - 31-222 Coarse thread to screw into the engine, and fine thread for the nut. OEM: 31-222, 31-0222, 67-0280, 70-2980

Quantity:

+ −

CODE: bolt4603-C14

BSA Rear Wheel Chain Adjusting Screw - Plunger and Rigid Frame A, B and M Group Models

£7.45 (£8.94 inc VAT)

OEM: 66-4603

BSA Rear Wheel Chain Adjusting Screw - Plunger and Rigid Frame A, B and M Group Models Correct fitment on rigid and plunger frame A7, A10, B31, B32, B33,...

Quantity:

+ −

CODE: bolt6606-B19

1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples

£1.45 (£1.74 inc VAT)

OEM: 14-6606

1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples Posi-drive screw used on various Triumph models - rocker box cover on...

Quantity:

+ −

CODE: bolt6620-B19

Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78

£1.95 (£2.34 inc VAT)

OEM: 14-6620

Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78 Chaincase cover posi-drive screw - correct fitment on OIF T120 + T140 and TR7...

Quantity:

+ −

CODE: shk-bolt118-C7

AJS / Matchless Jampot or Girling Shock Absorber Bottom Pivot Bolt

£4.95 (£5.94 inc VAT)

OEM: 01-6359, 016359

AJS / Matchless Jampot or Girling Shock Absorber Bottom Pivot Bolt Lower mounting point pivot bolt for use with Jampot or Girling shocks on AMC models...

Quantity:

+ −

CODE: cable132

BSA Throttle Cable A65, Thunderbolt

£7.95 (£9.54 inc VAT)

OEM: 60-0804

BSA Throttle Cable A65, Thunderbolt To suit BSA - A65T Thunderbolt (1968 on), A65T Thunderbolt (1968-72). Outer Length: 38" Inner Length: 42" 1/4" Drum...

Quantity:

+ −

CODE: cable099

BSA Throttle Cable B44 Victor Roadster, A65T Thunderbolt

£7.95 (£9.54 inc VAT)

BSA Throttle Cable B44 Victor Roadster, A65T Thunderbolt To suit BSA - B44 Victor Roadster (1965-66), A65T Thunderbolt (1965-67). Outer Length: 34" Inner...

Quantity:

+ −

CODE: hbolt1529-E12

Triumph/BSA Handlebar P Clamp Hemispherical Washer - 500/650/750cc Models

£1.10 (£1.32 inc VAT)

OEM: 97-1529, H1529

Triumph/BSA Handlebar P Clamp Hemispherical Washer - 500/650/750cc Models Hemispherical domed washer for use with handlebar eyebolt 97-1523 or...

Quantity:

+ −

CODE: hbolt2221-E12

Triumph/BSA Handlebar P Clamp Lower Cupped Washer - 500/650/750cc Models

£1.25 (£1.50 inc VAT)

OEM: 97-2221, H2221

Triumph/BSA Handlebar P Clamp Lower Cupped Washer - 500/650/750cc Models Lower cupped washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...

Quantity:

+ −

CODE: hbolt1580-E12

Triumph/BSA Handlebar P Clamp Rubber Buffer Washer - 500/650/750cc Models

£0.75 (£0.90 inc VAT)

OEM: 97-1580, H1580

Triumph/BSA Handlebar P Clamp Rubber Buffer Washer - 500/650/750cc Models Rubber buffer washer for use with handlebar eyebolt 97-1523 or 97-2291. Two...

Quantity:

+ −

CODE: 5xbolts-5/16-bsf-535-B24

5/16" BSF - 1+1/2" Long Hexagon High Tensile Setscrews - 5 Pack

£3.50 (£4.20 inc VAT)

5/16" BSF - 1+1/2" (35mm) Long Hexagon High Tensile Setscrews Pack of 5 bolts 22 TPI 5/16" BSF thread - 1+1/2" long (35mm)

Quantity:

+ −

CODE: 5xbolts-3/8-bsf-545-B24

3/8" BSF - 1+1/2" Long Hexagon High Tensile Setscrews - 5 Pack

£3.50 (£4.20 inc VAT)

3/8" BSF - 1+1/2" (35mm) Long Hexagon High Tensile Setscrews Pack of 5 bolts 20 TPI 3/8" BSF thread - 1+1/2" long (35mm)

Quantity:

+ −

CODE: hbolt1425-E12

Handle Bar Clamp Sleeve - BSA, Triumph - 97-1425

£1.45 (£1.74 inc VAT)

OEM: 97-1425

Handle Bar Clamp Sleeve - BSA, Triumph Clamp spacer for use with 'P' clamp 97-2291 4 Required per set Sold each (1) OEM: 97-1425

Quantity:

+ −

CODE: amalmk1-gk-std

Amal Concentric 600/900 Series Mark I Carburetter Gasket Set

£3.45 (£4.14 inc VAT)

OEM: 622/208, 622/073, 622/101, 13/163, 622/151, 622/082

Amal Concentric 600/900 Series Mark I Carburetter Gasket Set Gaskets and washers to open and clean or repair any Amal 600 or 900 series MK1 carburettor....

Quantity:

+ −

CODE: fkcoil371-A16

Twin Lead Ignition Coil 12V

£32.95 (£39.54 inc VAT)

Twin Lead Ignition Coil 12 volt As fitted as OEM on early Japanese bikes with points ignition. Can also be used with Electronic Ignition Kits. Fixing...

Quantity:

+ −

CODE: fkcoil68-A16

Coil Clamp Small 41mm

£4.75 (£5.70 inc VAT)

Coil Clamp Small 41mm Bolt hole centres 20mm apart

Quantity:

+ −

CODE: fkhorn049s

Replica Lucas Altette Horn Mounting Bracket 1 Hole

£8.95 (£10.74 inc VAT)

OEM: 700168, LU700168

Replica Lucas Altette horn bracket, single bolt. Made in 1/8" thick steel and painted gloss black. Horn mounting holes separation: 102mm. OEM: 700168,...

Quantity:

+ −

CODE: lamp033-A2

Rear Lamp Assembly - Lucas 525 Type

£10.95 (£13.14 inc VAT)

OEM: 53269, LU53269, L525

Rear Lamp Assembly - Lucas 525 Type Complete stop/tail light as fitted to various classic bikes - BSA, Triumph, Norton, etc. circa 1953-55. Supplied...

Quantity:

+ −

CODE: lamp036-A2

Rear Lamp Assembly - Lucas 564 Type

£7.95 (£9.54 inc VAT)

OEM: LU53454, L564, E66, 19-1014, LU564

Rear Lamp Assembly - Lucas 564 Type Complete stop/tail light as fitted to various classic bikes - BSA, Triumph, Norton, etc. circa 1955-70. Supplied...

Quantity:

+ −

CODE: lamp144

Replica Lucas MU42 6+1/2" Complete Headlamp - Black Enamel

£74.95 (£89.94 inc VAT)

OEM: 50128F, MU42

Replica Lucas MU42 6+1/2" Complete Headlamp - Black Enamel Complete Lucas type headlight with beam unit / panel / switch / ammeter and fixing bolts....

Quantity:

+ −

CODE: lamp150

Replica Lucas Complete 7" Headlamp - Black Enamel

£69.95 (£83.94 inc VAT)

OEM: SSU700, 50788F

Replica Lucas SSU700 7" Complete Headlamp - Black Enamel Complete Lucas Type Headlight with Beam Unit / Panel / Switch / Ammeter and Fixing Bolts...

Quantity:

+ −

CODE: lamp233-A7

Rear Lamp Assembly - Miller Stop Type

£18.95 (£22.74 inc VAT)

Rear Lamp Assembly - Miller Stop Type Complete stop/tail light as originally fitted to Vincent and Velocette models . Also universally used on custom...

Quantity:

+ −

CODE: lamp235-A7

Sparto Style Rear/Tail Light With Number Plate Mount

£23.95 (£28.74 inc VAT)

Sparto Style Rear/Tail Light With Number Plate Mount Cast, polished alloy rear lamp assembly with rubber gasket and round lens. Ideal for cafe racers and...

Quantity:

+ −

CODE: fkbrack081

Silencer Mounting Bracket 6 inch

£3.95 (£4.74 inc VAT)

Silencer Mounting Bracket 6 inch Chrome Bracket 6" long with bolt, for securing silencer to motorcycle. Can be cut and drilled to suit your mounting...

Quantity:

+ −

CODE: fkbrack083

Silencer Mounting Bracket 7 inch

£4.95 (£5.94 inc VAT)

Silencer Mounting Bracket 7 inch Chrome Bracket 7" long with bolt, with 5 pre-drilled holes, for securing silencer to motorcycle.

Quantity:

+ −

CODE: F99

Triumph Exhaust Pipe Crossover 500/650cc

£159.95 (£191.94 inc VAT)

OEM: 71-0022, 71-0024, E10022, E10024

Triumph Exhaust Pipe Crossover 500/650cc Suit 500cc Pre-unit twins Suit 650cc twins. Pipe diameter: 1+3/8" (35mm) with a 1+3/4" (45mm) Cup to fit exhaust...

Quantity:

+ −

CODE: DS292/271

Universal Burgess Type British Classic Silencer 21" Inlet: 1+3/8" to 2" (35-51mm)

£104.95 (£125.94 inc VAT)

Universal Burgess Type Classic British Style Silencer These will fit any motorcycle - Clamps are available for bolting to your bike. Available in ID:...

Select Options

CODE: fkunv13

Universal Slashcut Motorcycle Silencer 16" (id:38-46mm)

£37.95 (£45.54 inc VAT)

Universal Slashcut Motorcycle Silencer 16" (id:38-46mm) Inlet ID: 1+1/2inch (38mm) or 1+13/16inch (46mm) using shim provided. More reducing bushes are...

Quantity:

+ −

CODE: fkunv14

Universal Megaphone Motorcycle Silencer 23" (id:38-45mm)

£49.95 (£59.94 inc VAT)

Universal Megaphone style of Silencer. Inlet ID: 1+1/2inch (38mm) variable to 1+3/4inch (45mm) using shims provided. Length approx 23inches. End is 4"...

Quantity:

+ −

CODE: fkunv16

Universal Short Motorcycle Silencer 12" (id:38 or 45mm)

£39.95 (£47.94 inc VAT)

Universal Short style of Silencer - Chrome Either ID: 1+1/2inch (38mm) at one end or 1+3/4inch (45mm) at the other. Length approx 12inches O.D. of...

Quantity:

+ −

CODE: fkunv19

Universal Upswept Megaphone Motorcycle Silencer 20" (id: 36-45mm) RH

£59.95 (£71.94 inc VAT)

Universal Upswept Megaphone Style Silencer - Right Hand Side Pipe sweeps up approx 12 degrees off the horizontal Inlet ID: 1+7/16" (36mm) variable...

Quantity:

+ −

CODE: fkunv20

Universal Upswept Megaphone Motorcycle Silencer 20" (id:36-45mm) LH

£59.95 (£71.94 inc VAT)

Universal Upswept Megaphone Style Silencer - Left Hand Side Pipe sweeps up approx 12 degrees off the horizontal Inlet ID: 1+7/16" (36mm) variable to...

Quantity:

+ −

CODE: fkwa01

Universal Triumph Type Motorcycle Silencer 24" Inlet: 1+1/2" (38mm)

£69.95 (£83.94 inc VAT)

Universal Triumph Type Silencer - Similar to T120, TR6 etc Id: 1+1/2inch (38mm) inlet Width: 4" at widest point Has 2 bolt holes for the bracket...

Select Options

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Search results for "BOLT"Products found: 821

Account Details

Quick Links

Feked.com

Feked Online