.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

General

coil374-A16
£23.95 (£28.74 inc VAT)
OEM: S1233
BSA Bantam Wipac Ignition Coil - D1, D3, D7 Models Wipac type ignition coil suitable for Bantam D1, D3 and D7 flywheel magneto models. Black wire is to...
+

fktwist217r-E8
£13.95 (£16.74 inc VAT)
OEM: 60-7014, 66-8540, 16/364
Amal 364 Type Single Pull Twist Grip - 7/8" Bars Throttle assembly/twistgrip suitable for single pull cable. With throttle screw and friction adjuster....
+

fkseat301
£69.95 (£83.94 inc VAT)
Universal Solo Saddle Large Metal Frame, includes 2 springs. Approx Measurements: Length = 14" Width = 16" Front holes = 2" apart Rear holes = varying from...
+

valv571-B18
£59.95 (£71.94 inc VAT)
OEM: 70-4191, 70-2795, E4191, E2795
Oil Pressure Release Valve (With Tell Tale) Stainless Steel Body. Fits Triumph T110 and Triumph T120. (UK Made) Will fit most Triumph Pre-Unit 350, 500 &...
+

horn047
£52.95 (£63.54 inc VAT)
OEM: 54068061, 70175A
12 Volt Lucas 6H Type Horn - Typically Fitted to BSA/Triumph Models From 1958 Onwards 12v 6H replica horn - black satin finish with two spade terminals....
+

fork861-C19
£74.95 (£89.94 inc VAT)
OEM: 97-1889, 97-1890, 97-1649, 97-1695
Pair of Fork Stanchions for Triumph T120/TR6 Unit (1963-67), and 5TA/T100 (1964-67) Pre Shuttle Valve type Supplied in Hard Chrome - 2 pieces. Length: 22"...

fork943-C19
£74.95 (£89.94 inc VAT)
OEM: 97-0382A, H382A
Triumph Fork Stanchions with Oil Hole - Pair - 500/650cc Pre-Unit - Circa 1950-59 Nacelle type WITH oil filler hole for Triumph T100, T110, 5T, 6T, Speed...

drum430-B20
£46.95 (£56.34 inc VAT)
OEM: 37-3585, 373585, W3585, 37-1498, W1498
Rear Brake Drum - Triumph T100, T120, T150 - Bolt On Sprocket Type Accepts bolt-on ring sprocket. Fits Triumph 650cc models from 1966 to 1970 and 500cc...
+

gear3257-B23
£15.95 (£19.14 inc VAT)
OEM: 68-3257
BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...
+

b/rod-65-7007
£18.95 (£22.74 inc VAT)
OEM: 65-7007
BSA Rear Brake Rod - B Group from 1937-39 + M Group from 1937-62 Rigid frame M20 and M21 Models + early B Group models. Overall length including clevis:...
+

conrod9525
£129.95 (£155.94 inc VAT)
OEM: 70-9525, E9525, 70-3606, E3606
Triumph Connecting Rod - All 650cc Unit Twins + Pre Unit 500/650cc Models From 1956 Onwards Forged alloy with steel connecting rod cap - supplied with...
+

cable0308
£24.95 (£29.94 inc VAT)
OEM: 60-0308, D308
Triumph Clutch Cable - Pre-Unit 500/650cc Models Circa 1953-57 - USA Bars 5T, 6T, T100, T110, TR6 models from 1953-57 with higher USA handlebars. 3/8" x...
+

fork981-C19
£62.95 (£75.54 inc VAT)
OEM: 97-1299, H1299
Triumph Fork Stanchions - Pair - 500/650cc Pre-Unit Duplex Frame - Circa 1960-62 Correct fitment on T100SS, T120 and TR6 duplex frame models with...
+

clutch3218-B24
£3.45 (£4.14 inc VAT)
OEM: 40-3218, 57-1927, T1927
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...
+

off-klev001
£79.95 (£95.94 inc VAT)
Montesa Kickstart Lever Assembly - Cota 247, 348 and 349 Models Right hand kickstarter to fit various Cota 250/350cc models circa 1967 onwards + Impala...
+

off-seat003
£99.95 (£119.94 inc VAT)
Honda TL125 Low Profile Seat - Circa 1973-76 An authentic replica of the original TL125 seat but the foam is cut lower for a neater profile. Complete...
+

off-klev003
£89.95 (£107.94 inc VAT)
OEM: 712-010-1
Bultaco Kickstart Lever Assembly - Straight Type - 5 Speed Models Straight kickstarter suitable for most classic five speed Bultaco models including...
+

filt5262-F8
£149.95 (£179.94 inc VAT)
OEM: 70-5262, E5262
Triumph Dual Air Filter Assembly - T120 Unit Models Circa 1963-66 Complete assembly including gloss black body, filter element and clip. As fitted to...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

clutch2773-B25
£115.95 (£139.14 inc VAT)
OEM: 68-2773, 68-3272, 57-2773
BSA Triplex 3 Spring Clutch Chainwheel - 58T - A50/A65 Models Circa 1966-72 Correct fitment on BSA unit 500/650cc models. Triplex primary chain...
+

gear3171-B8
£39.95 (£47.94 inc VAT)
OEM: 67-3171, 42-3010, 65-3417, 65-3380
BSA Gear Lever - Long Type - A, B, C and M Group Models Circa 1938-54 Dog-legged gear change lever - as fitted to many models rigid, plunger and swinging...
+

f/rest4808-C4
£13.95 (£16.74 inc VAT)
OEM: 42-4808
BSA Footrest Tie Stud - A and B Group Swinging Arm Models Circa 1954-57 Long stud with fixed nut - correct fitment on earlier A7, A10, B31 and B33...
+

off-boots005-pair
£17.95 (£21.54 inc VAT)
35mm Marzocchi or Universal Fork Wipers / Dust Guard Boots - Montesa and Fantic Models Pair of black rubber fork wipers for 35mm Marzocchi forks or...
+

inlet3940
£55.95 (£67.14 inc VAT)
OEM: 70-3940, E3940, 70-3847, E3847
Triumph Inlet Manifold - Delta Head Pre Unit and Early Unit T120 Models - Circa 1959-63 Left or right hand side inlet manifold for pre unit and early...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.

Bestsellers Bestsellers