.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

General

tanksc/nut8317-E9
£0.45 (£0.54 inc VAT)
OEM: 65-8317, 42-8034
BSA Tank Badge Mounting Screw and Nut - Various Singles and Twins Countersunk screw and nut used to secure fuel/oil tank badges on various models...
+

clutch3218-B24
£3.45 (£4.14 inc VAT)
OEM: 40-3218, 57-1927, T1927
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...
+

dyn111704-A17
£3.95 (£4.74 inc VAT)
OEM: 111704
Lucas Dynamo Drive Gear End Retaining Screw - E3L, E3HM, E3LM Sprocket / driving gear pinion securing screw - as used on E3L, E3HM, E3LM dynamos fitted to...
+

cap019-A23
£6.95 (£8.34 inc VAT)
OEM: WCX600/180
Champion Branded Spark Plug Cap - 90° Elbow - 10KΩ Suppressor WCX600 type 90 degree suppressed plug cap. Authentic replica of the type used on later...
+

herr-pipe403-7"
£7.45 (£8.94 inc VAT)
Herringbone Fuel / Oil Pipe - 3/8" Bore - Black Reinforced oil/fuel pipe with herringbone pattern as fitted originally to many British motorcycles. 100%...
 

gk9511-C
£8.95 (£10.74 inc VAT)
OEM: 70-9511, E9511
Triumph Copper Rocker Box Gasket - 350/500cc Unit Twins Circa 1969-74 Solid copper rocker box joint washer - suitable for T90 and T100 models from 1969...
+

wtf-tenpart044-blk
£8.95 (£10.74 inc VAT)
Chain Tensioner Block - Enclosed Angled Type - Honda TLR/RTL Models + Universal Use Replacement chain tensioner slipper pad supplied with spacer and a...
+

clutch4312-B18
£10.95 (£13.14 inc VAT)
OEM: 15-4312
BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models Locates over the mainshaft nut to secure the central clutch spring. Correct...
+

gear-sw008-B4
£11.95 (£14.34 inc VAT)
OEM: 33906, 39184, 60-7240, 60-4508, 06-5390, 147SA
Triumph/Norton Neutral Gear Light Switch - Later 750cc Twins and Triples + Commando Models Genuine Lucas 147SA type neutral indicator switch with spade...
+

herr-pipe402-12"
£12.95 (£15.54 inc VAT)
Herringbone Fuel / Oil Pipe -5/16" Bore - Black Reinforced oil/fuel pipe with herringbone pattern as fitted originally to many British motorcycles. 100%...
 

fktwist217r-E8
£13.95 (£16.74 inc VAT)
OEM: 60-7014, 66-8540, 16/364
Amal 364 Type Single Pull Twist Grip - 7/8" Bars Throttle assembly/twistgrip suitable for single pull cable. With throttle screw and friction adjuster....
+

f/rest4808-C4
£13.95 (£16.74 inc VAT)
OEM: 42-4808
BSA Footrest Tie Stud - A and B Group Swinging Arm Models Circa 1954-57 Long stud with fixed nut - correct fitment on earlier A7, A10, B31 and B33...
+

gear3257-B23
£15.95 (£19.14 inc VAT)
OEM: 68-3257
BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...
+

bolt8385-C4
£15.95 (£19.14 inc VAT)
OEM: 42-8385
BSA Oil Tank Front Fixing Bolt - A and B Group Swinging Arm Models Circa 1954-62 Locates and secures the top front of the oil tank on B31, B32, B33, B34,...
+

off-boots005-pair
£17.95 (£21.54 inc VAT)
35mm Marzocchi or Universal Fork Wipers / Dust Guard Boots - Montesa and Fantic Models Pair of black rubber fork wipers for 35mm Marzocchi forks or...
+

b/rod-65-7007
£18.95 (£22.74 inc VAT)
OEM: 65-7007
BSA Rear Brake Rod - B Group from 1937-39 + M Group from 1937-62 Rigid frame M20 and M21 Models + early B Group models. Overall length including clevis:...
+

studset765-B14
£19.95 (£23.94 inc VAT)
OEM: 70-4856, 70-5963, 70-2888, 70-4541, 70-4540, 70-4098, E4856, E5963, E2888, E4541, E4540, E4098, S25-3, S1-51
Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68 Complete set of studs, bolts, nuts and washers suitable for T120 and TR6 models from...
+

tank3372-E9
£19.95 (£23.94 inc VAT)
OEM: 82-3372, F3372
Triumph Fuel Tank Rear Support Bracket - Pre Unit 500/650cc Models Circa 1954-55 Locates on the lower side of the frame under the petrol tank. Correct...
+

bolt-set210-B14
£19.95 (£23.94 inc VAT)
OEM: 21-1875, 60-4248, 21-2206, 14-1401, 70-3302, 14-0301
Triumph Rocker Box Stud and Bolt Set - All T140 and TR7 Models Rocker box to cylinder head stud and bolt set with UNC and UNF threads. Suitable for all...
+

coil374-A16
£23.95 (£28.74 inc VAT)
OEM: S1233
BSA Bantam Wipac Ignition Coil - D1, D3, D7 Models Wipac type ignition coil suitable for Bantam D1, D3 and D7 flywheel magneto models. Black wire is to...
+

wtf-cambush109
£23.95 (£28.74 inc VAT)
OEM: 12260-437-000
Honda Camshaft Bush - TLR200, TLR250, Early RTL250 + Later TL125 Models Circa 1983 Onwards Correct fitment on TLR200, Reflex, TLR250 and early RTL250...
+

cable0308
£24.95 (£29.94 inc VAT)
OEM: 60-0308, D308
Triumph Clutch Cable - Pre-Unit 500/650cc Models Circa 1953-57 - USA Bars 5T, 6T, T100, T110, TR6 models from 1953-57 with higher USA handlebars. 3/8" x...
+

cable8611
£25.95 (£31.14 inc VAT)
OEM: 68-8611, 68-8608
BSA A50 / A65 Clutch Cable - 1964-68 Models Correct fitment on models with non alloy levers. Standard length for UK spec handlebars. Lever end: 3/8" x...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.

Bestsellers Bestsellers