Frame

CODE: hl-wash2210-A4

Triumph Headlight Bracket Washer - OIF 500/750cc Models From 1971 Onwards

£0.45 (£0.54 inc VAT)

OEM: 97-2210, H2210

Triumph Headlight Bracket Washer - OIF 500/750cc Models From 1971 Onwards Headlamp bracket ear backing washer. Correct fitment on later T100 models + disc...

Quantity:

+ −

CODE: hl-bolt2095-A4

Triumph Headlight Bracket Attachment Bolt - OIF 500/750cc Models From 1971 Onwards

£1.45 (£1.74 inc VAT)

OEM: 21-2095, S2095

Triumph Headlight Bracket Attachment Bolt - OIF 500/750cc Models From 1971 Onwards Headlamp bracket ear to front fork outer cover bolt. Correct fitment on...

Quantity:

+ −

CODE: stand7553

Triumph Side Prop Stand - T140 and TR7 Models From 1980 Onwards

£62.95 (£75.54 inc VAT)

OEM: 83-7553, F17553

Triumph Side Prop Stand - T140 and TR7 Models From 1980 Onwards Non-threaded pivot hole and adjuster bolt hole + ball ended extension arm. Can also...

Quantity:

+ −

CODE: f/rest4808-C4

BSA Footrest Tie Stud - A and B Group Swinging Arm Models Circa 1954-57

£13.95 (£16.74 inc VAT)

OEM: 42-4808

BSA Footrest Tie Stud - A and B Group Swinging Arm Models Circa 1954-57 Long stud with fixed nut - correct fitment on earlier A7, A10, B31 and B33...

Quantity:

+ −

CODE: seatfix9196-C2

BSA Dual Seat Mounting Bracket - A and B Group Swinging Arm Models Circa 1954-60

£10.95 (£13.14 inc VAT)

OEM: 42-9196, 42-9062, 42-6799

BSA Dual Seat Mounting Bracket - A and B Group Swinging Arm Models Circa 1954-60 Correct fitment on A7, A10, B31 and B33 swinging arm models....

Quantity:

+ −

CODE: seatfix2087-C2

Triumph Dual Seat Check Wire - 650/750cc OIF Models - 1971 Onwards

£6.95 (£8.34 inc VAT)

OEM: 60-2087, D2087

Triumph Dual Seat Check Wire - 650/750cc OIF Models - 1971 Onwards Correct fitment on OIF T120, T140, T150, T160 models with dual hinged seat. Plastic...

Quantity:

+ −

CODE: stand4031

Norton Commando Centre Stand - 850cc and Later 750cc Models Circa 1971-76

£74.95 (£89.94 inc VAT)

OEM: 06-4031, 064031, 06-3051, 06-2192

Norton Commando Centre Stand - 850cc and Later 750cc Models Circa 1971-76 This is the stronger stand with the full length support stays as used on the...

Quantity:

+ −

CODE: nut5839-C4

Footrest Nut - Left Hand Thread - A50 and A65 Models Circa 1962-70 + Triumph/BSA Unit Singles

£4.45 (£5.34 inc VAT)

OEM: 29-5839, 82-9050, 40-4810

Footrest Nut - Left Hand Thread - A50 and A65 Models Circa 1962-70 + Triumph/BSA Unit Singles Footrest mounting nut with LH thread as used on BSA A50, A65...

Quantity:

+ −

CODE: t/rub174m-E9

BSA Fuel Tank Centre Grommet or Chaincase Inspection Cover - Shallow Type

£3.45 (£4.14 inc VAT)

OEM: 42-8010, 40-8039, 68-8169

BSA Fuel Tank Centre Grommet or Chaincase Inspection Cover - Shallow Type Fuel tank plug fitted to many BSA models with a steel central mounting fuel...

Quantity:

+ −

CODE: swing0118-C4

Triumph/BSA Swinging Arm Spindle Set - Unit OIF 650/750cc Twins Circa 1971-87

£29.95 (£35.94 inc VAT)

OEM: 83-2691, F12691, 83-2692, F12692, 83-2521, F12521

Triumph/BSA Swinging Arm Spindle Set - Unit OIF 650/750cc Twins Circa 1971-87 Complete swinging arm spindle set including bobbins, split bushes and...

Quantity:

+ −

CODE: swing0120-C4

Triumph Swinging Arm Spindle Set - Later Unit 350/500cc Models Circa 1967-74

£35.95 (£43.14 inc VAT)

OEM: 82-7342, F7342, 82-7343, F7343, 82-4076, F4076

Triumph Swinging Arm Spindle Set - Later Unit 350/500cc Models Circa 1967-74 Complete swinging arm spindle set including pin, pivot bushes and tab...

Quantity:

+ −

CODE: swing0119-C4

Triumph Swinging Arm Spindle Set - Early Unit 350/500cc Models Circa 1958-66

£21.95 (£26.34 inc VAT)

OEM: 82-4076, F4076, 82-4196, F4196, 82-4195, F4195

Triumph Swinging Arm Spindle Set - Early Unit 350/500cc Models Circa 1958-66 Complete swinging arm spindle set including pin, pivot bushes and caps....

Quantity:

+ −

CODE: mudR-FK4R

Extra Long 5+3/4" Rear Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - D Section

£59.95 (£71.94 inc VAT)

Extra Long 5+3/4" Rear Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - D Section Made in England using a heavier gauge steel than standard mudguards....

Quantity:

+ −

CODE: felt-F291-C4

Felt Strip - Velocette Rear Chainguard Joint or Universal Use - 4+1/2" x 1/2"

£0.95 (£1.14 inc VAT)

OEM: F291

Felt Strip - Velocette Rear Chainguard Joint or Universal Use - 4+1/2" x 1/2" Correct fitment on Velocette spring frame models - fits between the...

Quantity:

+ −

CODE: stand700w

9" Universal Side Stand - Clamps to Frame - To Suit Various Frame Sizes

£37.95 (£45.54 inc VAT)

9" Universal Side Stand - Clamps to Frame - To Suit Various Frame Sizes Prop / kick stand suitable for various marques and models. Cast iron, finished in...

Select Options

CODE: s/cov342

Rubber Dunlop Style Trials/Solo Seat Cover

£37.95 (£45.54 inc VAT)

Rubber Dunlop Style Trials/Solo Seat Cover Heavy duty replica Dunlop rubber seat cover as used on many British pre '65 competition, road racing,...

Quantity:

+ −

CODE: n/plate409-YB-C4

Rear Number Plate Fixing Nuts and Bolts - Yellow/Black Nylon - Pack of 8

£1.95 (£2.34 inc VAT)

Rear Number Plate Fixing Nuts and Bolts - Yellow/Black Nylon - Pack of 8 Number plate fasteners - Length UH: 1" (25mm) x M6 (6mm) thread. Available in...

Options

CODE: short-stud9047-C4

Left Hand Footrest Stud - Triumph/BSA Unit Singles - C15, B25, C25, B40, TR25W

£19.95 (£23.94 inc VAT)

OEM: 40-4855, 82-9047, F9047

Left Hand Footrest Stud - Triumph/BSA Unit Singles - C15, B25, C25, B40, TR25W Stud to secure the LH / near side footrest to frame. Left hand thread +...

Quantity:

+ −

CODE: plate4818-C4

BSA Footrest Splined Locking Plate - A50 and A65 Models Circa 1962-69 + Triumph/BSA Unit Singles

£6.45 (£7.74 inc VAT)

OEM: 40-4818, 82-9048, F9048

BSA Footrest Splined Locking Plate - A50 and A65 Models Circa 1962-69 + Triumph/BSA Unit Singles Footrest stud locking plate as used on BSA A50, A65 and...

Quantity:

+ −

CODE: stud4804-C4

BSA Left Hand Footrest Stud - A50 and A65 Models Circa 1962-69

£18.95 (£22.74 inc VAT)

OEM: 68-4804

BSA Left Hand Footrest Stud - A50 and A65 Models Circa 1962-69 Stud to secure the LH / near side footrest to frame. Left hand thread + splined centre...

Quantity:

+ −

CODE: peg7510-C4

Triumph Oil Tank Mounting Screwed Peg - 500/650/750cc Unit Models Circa 1968-74 - UNF Thread

£2.45 (£2.94 inc VAT)

OEM: 82-7510, F7510

Triumph Oil Tank Mounting Screwed Peg - 500/650/750cc Unit Models Circa 1968-74 - UNF Thread As used on T100, TR6, T120, T150 and T160 models from 1969...

Quantity:

+ −

CODE: swing6821-C3

Swinging Arm Bobbin - Triumph 650cc Unit Twins and T150/T160 + BSA A50/A65 Models

£8.45 (£10.14 inc VAT)

OEM: 82-6821, F6821

Swinging Arm Bobbin - Triumph 650cc Unit Twins and T150/T160 + BSA A50/A65 Models Swinging arm bearing sleeve with lubrication grease channel - two...

Quantity:

+ −

CODE: rail9152

BSA Pillion Grab Rail / Lifting Handle - C25, B25, B40, B44 Models Circa 1967-70

£79.95 (£95.94 inc VAT)

OEM: 41-9152

BSA Pillion Grab Rail / Lifting Handle - C25, B25, B40, B44 Models Circa 1967-70 Correct for BSA unit singles from 1967-70 - C25, B25, Starfire,...

Quantity:

+ −

CODE: rail9327

BSA Pillion Grab Rail / Lifting Handle - A50 and A65 Models Circa 1967-70

£64.95 (£77.94 inc VAT)

OEM: 68-9327

BSA Pillion Grab Rail / Lifting Handle - A50 and A65 Models Circa 1967-70 Correct for unit 500/650cc models from 1967-70 - Lightning, Thunderbolt, Royal...

Quantity:

+ −

CODE: spring133-E2

Prop Stand Spring Triumph T100, T120, T140, T150, T160 and BSA Unit

£3.45 (£4.14 inc VAT)

OEM: 82-8382

Prop Stand Spring Triumph T100, T120, T140, T150, T160 and BSA Unit models (Side Stand Spring) Length inside hooks: 3+1/4" (83mm) OEM: 82-8382

Quantity:

+ −

CODE: spring488-E2

Centre Stand Spring BSA C15, B40

£3.45 (£4.14 inc VAT)

OEM: 40-4716

Centre Stand Spring BSA C15, B40 Length inside hooks: 3+11/16" (93mm) OEM: 40-4716

Quantity:

+ −

CODE: rub5

Triumph/BSA Rear Pillion Footrest Rubbers - Pair

£8.95 (£10.74 inc VAT)

OEM: 29-7583, 82-9054

Triumph/BSA Rear Pillion Footrest Rubbers - Pair Without logo - round rubber with square hole, approximately 4" long. Easy peasy to replace, just pop...

Select Options

CODE: swing4087-C3

Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models

£3.95 (£4.74 inc VAT)

OEM: 40-4249, 42-4216, 90-3218, 82-4087, F4087

Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models With threaded centre for grease nipple. Correct fitment on the following bikes: BSA...

Quantity:

+ −

CODE: swing4076-C3

Triumph/BSA Swinging Arm Bush - Bantam, Tiger Cub and Unit 350/500cc Models

£6.45 (£7.74 inc VAT)

OEM: 40-4209, 82-4076, F4076

Triumph/BSA Swinging Arm Bush - Bantam, Tiger Cub and Unit 350/500cc Models Correct fitment on the following bikes: BSA Bantam D7, D10, D14 models + C15,...

Quantity:

+ −

CODE: off-mud019-UU

Universal Short Front Mudguard - Unpolished Alloy - 18/19" Wheel

£49.95 (£59.94 inc VAT)

Universal Short Front Mudguard - Unpolished Alloy - 18/19" Wheel Universal plain undrilled, C shaped profile to fit 18/19" front wheel. Unpolished...

Quantity:

+ −

CODE: fkbrk7

Universal Headlight Bracket 30-38mm

£20.95 (£25.14 inc VAT)

Pair of Universal Headlight Bracket 30-38mm Chromed bracket to clamp around front forks, variable clamp adjustment between 30mm and 38mm. Outer hole centre...

Select Options

CODE: cab0973-E12

Universal Rubber Cable / Hose Guide - 20mm x 12mm

£0.85 (£1.02 inc VAT)

Universal Rubber Cable / Hose Guide - 20mm x 12mm Useful frame protector that can be attached to cables as required. Suitable for fitting onto most...

Quantity:

+ −

CODE: stay6853-C2

BSA Rear Mudguard Rubber Distance Piece - A and B Group Swinging Arm Models Circa 1954-63

£2.95 (£3.54 inc VAT)

OEM: 42-6853

BSA Rear Mudguard Rubber Distance Piece - A and B Group Swinging Arm Models Circa 1954-63 Rear mudguard rubber pad as used on B31, B33, DB32/DBD34...

Quantity:

+ −

CODE: stay6782-C2

BSA Rear Mudguard Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-63

£2.95 (£3.54 inc VAT)

OEM: 42-6782

BSA Rear Mudguard Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-63 Rear mudguard mounting plate/stiffener as used on B31, B33,...

Quantity:

+ −

CODE: stay6759

BSA Rear Mudguard Fixing Clip - A and B Group Swinging Arm Models Circa 1954-63

£8.95 (£10.74 inc VAT)

OEM: 42-6759, 42-6785

BSA Rear Mudguard Fixing Clip - A and B Group Swinging Arm Models Circa 1954-63 Rear mudguard mounting bracket as used on B31, B33, DB32/DBD34 Goldstar,...

Quantity:

+ −

CODE: stop-grom267-C12

Universal Centre Stand Rubber Grommet - 25mm

£1.45 (£1.74 inc VAT)

Universal Centre Stand Rubber Grommet - 25mm Rubber stopper - fits 3/8" (10mm) hole. Ideal to protect any area that makes contact with the centre stand -...

Quantity:

+ −

CODE: off-stand001

Universal Side Stand / Prop Stand - Trials, Motocross and Lightweight Models - Various Sizes

£18.95 (£22.74 inc VAT)

Universal Side Stand / Prop Stand - Trials, Motocross and Lightweight Models - Various Sizes Complete side stand assembly with spring and clamp on lug....

Select Options

CODE: off-swpin001

Triumph Tiger Cub / BSA Bantam Silent Block Conversion Kit for Standard Swinging Arm

£59.95 (£71.94 inc VAT)

Triumph Tiger Cub / BSA Bantam Silent Block Conversion Kit for Standard Swinging Arm Designed in association with Sammy Miller, this silent block...

Quantity:

+ −

CODE: off-mud019-U

Manx Norton/Triton Type Short Front Mudguard - Unpolished Alloy - 18/19" Wheel

£49.95 (£59.94 inc VAT)

Manx Norton/Triton Type Short Front Mudguard - Unpolished Alloy - 18/19" Wheel Universal plain undrilled, C shaped profile to fit 18/19" front wheel....

Quantity:

+ −

CODE: off-pegbk00-pair

Universal Footrest Mounting Lugs - Weld On Type-Pair

£5.00 (£6.00 inc VAT)

Universal Footrest Mounting Lugs - Weld On Type Pair of mounting brackets ideal for use with our Sammy Miller footrests or Talon foot pegs. Suitable for...

Quantity:

+ −

CODE: dowel5943-C4

Triumph Footrest Dowel - Pre Unit and Unit Models From 1954-88

£0.95 (£1.14 inc VAT)

OEM: NT316, 82-5943, F5943, 99-3543

Triumph Footrest Dowel - Pre Unit and Unit Models From 1954-88 Peg to secure the front footrests on all swinging-arm pre-unit models from 1954-1962 + Unit...

Quantity:

+ −

CODE: bead0251-C4

Front Number Plate Rubber Beading Plate - Triumph Models + Universal Fit

£2.95 (£3.54 inc VAT)

OEM: 97-0251, H251

Front Number Plate Rubber Beading Plate - Triumph Models + Universal Fit Triangular profile rubber beading strip as fitted to both pre-unit and unit...

Quantity:

+ −

97-2161, 97-2162, H2161, H2162 - Triumph Head Lamp Shroud Brackets - Pair

CODE: shrouds2161

Triumph Head Lamp Shroud Brackets - Pair - 97-2161, 97-2162

£114.95 (£137.94 inc VAT)

OEM: 97-1887, 97-1888, H1887, H1888

Triumph Head Lamp Shroud Brackets - Pair - 97-2161, 97-2162 Fork Stanchion Upper Shroud Painted Gloss Black Sold as a Pair Made in England OEM:...

Quantity:

+ −

Extra Long 5" Rear Mudguard - Raw Steel - 18/19" Wheel - C Section

CODE: mudR-FK9R

Extra Long 5" Rear Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - C Section

£69.95 (£83.94 inc VAT)

Extra Long 5" Rear Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - C Section Made in England using a heavier gauge steel than standard mudguards....

Quantity:

+ −

Extra Long 5" Rear Mudguard - Polished Alloy - 18/19" Wheel - C Section

CODE: mudR-FK9A-48

Extra Long 5" Rear Mudguard - Polished Alloy - 18/19" Wheel - Heavy Duty - C Section

£57.95 (£69.54 inc VAT)

Extra Long 5" Rear Mudguard - Polished Alloy - 18/19" Wheel - Heavy Duty - C Section Made in England using a heavier gauge alloy than standard...

Options

CODE: peg6672-C4

Triumph Oil Tank Mounting Screwed Peg - 350/500/650cc Unit Models Circa 1966-68

£1.95 (£2.34 inc VAT)

OEM: 82-6672, F6672

Triumph Oil Tank Mounting Screwed Peg - 350/500/650cc Unit Models Circa 1966-68 As used on 3TA, 5TA, T90, T100, 6T, TR6 and T120 models from 1966-68 Also...

Quantity:

+ −

CODE: wash3096-E2

Triumph/BSA Side Stand Swivel Pin Tab Washer - Pre Unit and Unit Models Circa 1950-70

£0.95 (£1.14 inc VAT)

OEM: 82-3096, F3096, 40-4734

Triumph/BSA Side Stand Swivel Pin Tab Washer - Pre Unit and Unit Models Circa 1950-70 For use with swivel pin to mount the prop stand on models with a...

Quantity:

+ −

CODE: bolt3097-E2

Triumph/BSA Side Stand Swivel Pin / Pivot Bolt - Pre Unit and Unit Models Circa 1950-70

£4.45 (£5.34 inc VAT)

OEM: 82-3097, F3097, 40-4733

Triumph/BSA Side Stand Swivel Pin / Pivot Bolt - Pre Unit and Unit Models Circa 1950-70 Correct fitment to mount the prop stand on models with a threaded...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Account Details

Quick Links

Feked.com

Feked Online