.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

bolt3619-E2
£4.50 (£5.40 inc VAT)
OEM: 82-3619, F3619
Centre Stand Bolt - Triumph Pre-Unit 350/500/650cc - From 1954-62 Centre stand securing bolt, with flat section for the locking washer. To fit T21, 3TA,...
+

rub062-C12
£2.95 (£3.54 inc VAT)
OEM: 06-0636, 060636
Norton Commando Oil Tank Mounting Rubber Bobbin - 06-0636 Rubber with threaded stud at each end. OEM: 06-0636, 060636
+

brkt7582
£7.95 (£9.54 inc VAT)
OEM: 83-7582, F7582, 71-3761, E3761
Triumph T140/TR7 Silencer Mounting Bracket - Long Cigar Type Silencer bracket/rear footrest mounts as fitted to Triumph TR7 & T140 models from 1980...
+

short-stud9047-C4
£19.95 (£23.94 inc VAT)
OEM: 40-4855, 82-9047, F9047
Left Hand Footrest Stud - Triumph/BSA Unit Singles - C15, B25, C25, B40, TR25W Stud to secure the LH / near side footrest to frame. Left hand thread +...
+

bolt0251-B19
£1.45 (£1.74 inc VAT)
OEM: 14-0251, 14-251
7/16" UNF - 2+3/4" Hexagonal Bolt - Part Threaded - 14-0251 As used on various unit Triumph models - footrest mounting, engine plates + universal use, as...
+

buck9355-E4
£5.95 (£7.14 inc VAT)
OEM: 82-9355, F9355
Triumph Battery Strap Anchorage Buckle - Later T140 and TR7 Models + T150 and T160 Models Correct fitment on later T140 and TR7 models from 1978 onwards...
+

spring488-E2
£3.45 (£4.14 inc VAT)
OEM: 40-4716
Centre Stand Spring BSA C15, B40 Length inside hooks: 3+11/16" (93mm) OEM: 40-4716
+

trans276-T7
£4.75 (£5.70 inc VAT)
BSA Piled Arms (Cycles) - Transfer
+

stand763
£89.95 (£107.94 inc VAT)
OEM: 82-4763, 82-4304, F4763, F4304
Triumph Pre-Unit Duplex Frame Centre Stand - 500/650cc Models Correct for 650cc - TR6, T120 Duplex Frame Pre-Unit models from 1960-63, and 500/650cc -...
+

stand627
£79.95 (£95.94 inc VAT)
OEM: 83-2627
Triumph/BSA Centre Stand - Oil in Frame T120, TR6, A65 Models Circa - 1971-73 Powder coated black. OEM: 83-2627 Made In England Fitting kits - bolts,...
+

seatrub128-C2
£1.95 (£2.34 inc VAT)
OEM: 82-4898
Seat Buffer - Triumph/BSA Rubber seat buffer for Triumph T120 and various BSA models. (Half Type - D shape) OEM: 82-4898
+

mud029
£59.95 (£71.94 inc VAT)
D Shaped 6" Rear Mudguard - Raw Steel - 18/19" Wheel - Universal Blade Universal plain undrilled, D shaped profile to fit 18/19" rear wheel. Both sides...
+

stop-grom01-C12
£7.95 (£9.54 inc VAT)
Universal Centre Stand Rubber Stopper / Grommet Rubber stopper - supplied with allen bolt, lock nut and washer. Ideal to protect any area that makes...
+

knob9445-C4
£4.45 (£5.34 inc VAT)
OEM: 82-9445, F9445
Triumph Trident Side Panel Cover Release Knob - T150, T160 Models Side panel securing knob for all Triumph Trident models. Attaches on the left hand side...
+

f/rest4808-C4
£13.95 (£16.74 inc VAT)
OEM: 42-4808
BSA Footrest Tie Stud - A and B Group Swinging Arm Models Circa 1954-57 Long stud with fixed nut - correct fitment on earlier A7, A10, B31 and B33...
+

b/rod-41-7037
£14.95 (£17.94 inc VAT)
OEM: 41-7037, 82-9036, F9036
19" BSA/Triumph Brake Rod - B25, C25, B40, B44 and TR25W Models - Circa 1967-71 Rear brake rod - correct fitment on BSA and Triumph unit singles circa...
+

3-16-ball-F4
£0.45 (£0.54 inc VAT)
OEM: S70-4, 1-4676
3/16" Ball Bearing - Single Ball - Universal Use Diameter: 3/16" (4.8mm) As used in some Triumph and BSA cup and cone steering head bearings, Tiger Cub...
+

b/rod-83-2616
£6.45 (£7.74 inc VAT)
OEM: 83-2616, F12616
1 8" BSA/Triumph Brake Rod - OIF Unit Singles - B25, B50, TR5T, TR25W Models From 1971 Onwards Rear brake rod - correct fitment on BSA and Triumph oil in...
+

seatrub9110-C2
£1.45 (£1.74 inc VAT)
OEM: 76-9110
BSA Seat Pan Rubber Buffer - A50, A65 and B50 Models Circa 1962-70 Rubber grommet - locates under the seat on dual seat A50, A65 and B50 models. OD:...
+

stud0548-C4
£2.45 (£2.94 inc VAT)
OEM: 21-0548, S548
Triumph Pivot Lug To Engine Plate Stud - 650 Twins + 750cc Triples - 1967 Onwards - UNF Thread Rear engine plate to frame stud as used on T120, TR6 and...
+

swing2087-C4
£13.95 (£16.74 inc VAT)
OEM: 21-2087, S2087
Triumph/BSA Swinging Arm Pivot Bolt - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot stud and bolt assembly. Correct fitment on all oil in frame...
+

off-mud019-U
£49.95 (£59.94 inc VAT)
Manx Norton/Triton Type Short Front Mudguard - Unpolished Alloy - 18/19" Wheel Universal plain undrilled, C shaped profile to fit 18/19" front wheel....
+

fkref143-A7
£10.95 (£13.14 inc VAT)
OEM: LU57160, 19-1338, 19-1119, RER22
Pattern Lucas RER22 Amber/Chrome Oil Cooler reflector For Triumph T150/T160/X75 Hurricane and BSA Rocket 3 models Supplied with backing rubber and...
+

bag9089
£22.95 (£27.54 inc VAT)
OEM: 75-9089
BSA Motorcycle Tool Roll/Pouch - Black with Gold Logo Tool Roll/Bag with Gold BSA Logo Black Vinyl - tie up type tool roll Pouch area measures...
+

lock0402
£39.95 (£47.94 inc VAT)
OEM: 60-0402, 60-0403
Nieman Steering Lock and Keys - Triumph 1963-1967 Top quality steering lock as fitted to various Triumphs up to 1967 including Pre-Unit 500cc and Unit...
+

spring-kit953-E2
£14.95 (£17.94 inc VAT)
OEM: 21-2077, S2077, 14-1304, 83-3793, F13793
Triumph Centre Stand Fixing Kit - OIF T120 + T140 and TR7 Models - Circa 1971-79 Complete set of centre stand mounting hardware. Correct fitment on oil in...
+

bear2245-C3
£4.95 (£5.94 inc VAT)
OEM: 83-2245, F2245
Triumph/BSA Swinging Arm Bearing - B25, B50 and TR25W and TR5T Models Needle roller swinging arm bearing - two required per bike. OD: 1+1/4" (31.8mm)...
+

knob3474-C4
£10.95 (£13.14 inc VAT)
OEM: 82-3472, F3472
Triumph Toolbox Cover Knob - T15 and T20 Tiger Cub Models Circa 1953-68 Tool box casing lid thumb knob with internal thread as used on various Tiger Cub...
+

stay3599-C2
£5.95 (£7.14 inc VAT)
OEM: 82-3599, F3599
Triumph Rear Mudguard Mounting Bracket - Pre Unit and Early T90/T100 Models Circa 1954-64 Rear engine plates to mudguard bracket. Correct fitment s ingle...
+

rub4805-pair
£8.95 (£10.74 inc VAT)
OEM: 90-4805
BSA Bantam Riders Footrest Rubbers - D1, D3 and D5 Models Pair of BSA long ribbed riders footrest rubbers as fitted to rigid and plunger frame Bantam...
+

swing2692-C3
£1.45 (£1.74 inc VAT)
OEM: 83-2692, F12692
Triumph/BSA Swinging Arm Pivot Dirt Excluder - Unit OIF 650/750cc Twins Circa 1971-87 Rubber dust seal - locates each end of the swinging arm spindle...
+

spring909-E2
£5.95 (£7.14 inc VAT)
OEM: 06-2592
Norton Commando 750cc, 850cc prop stand spring (1971-76). (Side Stand Spring) Length inside hooks: 7" (175mm) OEM: 06-2592
+

guard2641
£64.95 (£77.94 inc VAT)
OEM: 83-2641
Triumph T140/T120 Chainguard - Black - 83-2641 Rear chain guard for Triumph Bonneville T140 models, and T120R models. Painted in Black Gloss Made in...
+

stand4744-E2
£6.95 (£8.34 inc VAT)
OEM: 42-4744
BSA Centre Stand Pivot Bar/Pin - BSA A and B Swinging Arm Models from 1958-62 Suitable for swinging arm models - BSA Goldstar, B31, B32, B33, B34 from...
+

brake0593-C18
£6.95 (£8.34 inc VAT)
OEM: 37-0593, W593, 60-0638, D638
Triumph Front Brake Cable End Clevis - Fork End Overall length: 1+3/8" (35.3mm) OEM: 37-0593, W593,  60-0638, D638
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

swing3798-C3
£1.95 (£2.34 inc VAT)
OEM: 82-3798, F3798
Triumph Swinging Arm Spindle End Cap - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66 Swinging arm end cap - correct fitment on: Pre unit 5T,...
+

wash0660
£0.65 (£0.78 inc VAT)
OEM: 30-0660, 30-660
BSA - 7/16" Plain Washer - Fuel Tank and Frame + Universal Use Rear fuel bank support bolt washer on rigid and plunger frame C10, C11, B31, B32, B33,...
+

strap8028-E4
£14.95 (£17.94 inc VAT)
OEM: 82-8028, F8028
Triumph Rear Battery Strap Mounting Bracket - 500/650cc Models Circa 1968-74 Battery carrier rear mounting strap with rectifier mounting tab. Correct...
+

wash5679-E2
£0.75 (£0.90 inc VAT)
OEM: 82-5679, F5679
Triumph Centre Stand Bolt Washer - Unit 350/500/650cc + Early T150 Models Plain flat washer locates over the bolt on the inner side of the stand lug....
+

off-mud019-P
£64.95 (£77.94 inc VAT)
Manx Norton/Triton Type Short Front Mudguard - Polished Alloy - 18/19" Wheel Universal plain undrilled, C shaped profile to fit 18/19" front wheel....
+

stays4088/90
£43.95 (£52.74 inc VAT)
OEM: 97-4088, 97-4090, H4088, H4090
Triumph/BSA Headlamp Mounting Wire Stays - A65 Firebird Scrambler and TR6C Models Circa 1971-72 Pair of chrome plated headlight mounting stays suitable...
+

stay97-1681
£23.95 (£28.74 inc VAT)
OEM: 97-1681, H1681
Triumph Front Mudguard Mounting Stay - Unit 350/500/650cc + T20 Tiger Cub Models Circa 1964-70 Two tab front stay as used on T90, T100, T120, TR6 models...
+

num44
£27.95 (£33.54 inc VAT)
OEM: 90-6748
BSA Rear Number Plate - Bantam D7, D10 and D14 Models + B40 and A65 Rocket Models Circa 1964-65 Long type rear number plate / tail light bracket as used...
+

rub26
£10.95 (£13.14 inc VAT)
OEM: 04-0370
Footrest Rubber Norton - Bicycle Style Suit earlier Nortons pre 1956 Branded - NORTON 3+3/4" Long 2+1/4" Wide Priced per PAIR OEM: 04-0370
+

stand932
£89.95 (£107.94 inc VAT)
OEM: 82-5932
Triumph Centre Stand for T120, 6T and TR6 Models - 1964-68 Powder coated black OEM: 82-5932 Made in England Made by LF Harris to the original...
+

spring-kit958-E2
£8.95 (£10.74 inc VAT)
Centre Stand Fixing Kit Triumph T120 etc Includes spring, bolts and washers Triumph T120 1963-67
+

fkswing355-S-C4
£18.95 (£22.74 inc VAT)
OEM: 42-4112
BSA Solid Type Swinging Arm Spindle - A and B Group Models Circa 1954-57 Solid swinging arm spindle - correct fitment on A7, A10, B31, B32, B33 and B34...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.