.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

bolt2077-E2
£3.65 (£4.38 inc VAT)
OEM: 21-2077, S2077
Centre Stand Bolt - Triumph/BSA - 21-2077 Centre stand securing bolt. Suit late model Triumh and BSA oil in frame models OEM: 21-2077, S2077
+

spring3617-E2
£3.95 (£4.74 inc VAT)
OEM: 82-3617, F3617
Triumph Centre Stand Spring - Pre Unit 650cc Models Circa 1954-60 + 350/500cc Models Correct fitment on pre-unit 650cc swinging arm models from 1954-60....
+

spring700H-E2
£3.95 (£4.74 inc VAT)
OEM: 82-2610, F2610
Prop / Side Stand Spring Triumph T100, T120 Early Unit Models Length inside hooks: 5+5/8" (143mm) OEM: 82-2610, F2610
+

fkswing050-C3
£3.95 (£4.74 inc VAT)
OEM: 83-2521, F12521
SWINGING ARM PIN BUSH - BSA / Triumph Swinging arm pin bush for BSA A65 Oil In Frame OIF (1971-72) and Triumph TR6, T120 (1971-74), TR7, T140...
+

seatfix218-C2
£3.95 (£4.74 inc VAT)
OEM: 60-0374
Check Wire - Triumph Triumph Dual Seat Check Wire, as fitted to all Triumph twins. (Pre Oil in frame) (1959-74) OEM: 60-0374, D374
+

stud4682-B14
£3.95 (£4.74 inc VAT)
OEM: 82-4682, F14682
Frame Engine Stud - Triumph - 82-4682 Used on the Triumph engine to Frame. OEM: 82-4682, F14682
+

stay907-C2
£3.95 (£4.74 inc VAT)
OEM: 97-4022
Triumph/BSA Front Mudguard Bracket - 97-4022 Fixing Bracket for wire stay type front mudguards (1971-72). As fitted to Triumph TR6 and T120 Oil in Frame,...
+

mat8091-E4
£3.95 (£4.74 inc VAT)
OEM: 68-4597, 82-9003, 82-8091, F9003, F8091, 49510
Battery Tray/Carrier Rubber Mat - Triumph, BSA, Royal Enfield + Universal Use Correct fitment for many Triumph & BSA models, also used on the Royal...
+

stay5994-C2
£3.95 (£4.74 inc VAT)
OEM: 82-5994, F5994 82-4690, F4690
Triumph Rear Mudguard Bridge Clip - 500/650cc Models - Circa 1960-70 Triumph rear mudguard bracket as used on both pre-unit and unit models. Powder...
+

clip115-C4
£3.95 (£4.74 inc VAT)
D-Ring DZUS Fastener - Universal Quick Release Fairing or Panel Clip Allows for quick removal and replacement of fairings and body panels. Spring...
+

spring4671-E2
£3.95 (£4.74 inc VAT)
OEM: 82-4671, F4671
Triumph Centre Stand Spring - Pre Unit and Unit 650cc Models + T150/160 Models Correct fitment on pre-unit and unit 650cc models from 1960-70. Also fits...
+

strap2952-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 6+5/16" (160mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

strap2951-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 6+5/16" (160mm) Long - Closed Loop + Open Bar Strong rubber band with integral closed metal brackets at one end and...
+

strap2950-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 5+9/16" (141mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

swing4087-C3
£3.95 (£4.74 inc VAT)
OEM: 40-4249, 42-4216, 90-3218, 82-4087, F4087
Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models With threaded centre for grease nipple. Correct fitment on the following bikes: BSA...
+

tenpart3556-C3
£3.95 (£4.74 inc VAT)
OEM: 83-3556, F3556
Triumph/BSA Chain Adjuster Snail Cam - B25, B50 and TR25W and TR5T Models Swinging arm pivot/rear chain tensioner plate as fitted to OIF models from 1971...
+

knob1357-C4
£3.95 (£4.74 inc VAT)
OEM: 83-1357, F11357, 82-8044, F8044
Triumph Side Panel / Toolbox Knob - Unit 350/500/650cc Twins From 1968 Onwards Side cover securing screw as fitted to T120 and TR6 models from 1968-70 +...
+

tank8058-E9
£3.95 (£4.74 inc VAT)
OEM: 42-8058
BSA Fuel Tank Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-59 Locates below the petrol tank - c orrect fitment on swinging arm B31,...
+

nut7389-C4
£3.95 (£4.74 inc VAT)
OEM: 82-7389, F7389
Triumph Engine Plate To Frame Nut - 650 Twins + 750cc Triples - 1967 Onwards - UNF Thread Rear engine plate to frame shouldered nut as used on T120, TR6...
+

stud4077-C4
£3.95 (£4.74 inc VAT)
OEM: 40-4855, 82-9047, F9047
Engine to Frame Stud - Triumph/BSA Unit Singles - C15, B25, C25, B40, B44, TR25W Lower rear mounting engine to frame stud as used on the models listed...
+

spring489-E2
£4.45 (£5.34 inc VAT)
OEM: 66-4767

+

trim092-C4
£4.45 (£5.34 inc VAT)
OEM: 67-6851
Rear Number Plate Trim - BSA - 67-6851 BSA Rear Rubber Number Plate Trim for most models. Approx 2ft/60cm OEM: 67-6851
+

bracket958H-E4
£4.45 (£5.34 inc VAT)
OEM: 82-8032, F8032
Triumph Battery Strap Anchorage Bracket - 350/500/650cc Models Circa 1968-71 Correct fitment on T90, T100, T120 and TR6 models circa 1968-71. Correct...
+

stay522H-C2
£4.45 (£5.34 inc VAT)
OEM: 97-1685
Triumph Front Mudguard Bracket - 97-1685 Triumph Front Mudguard Bracket. Powder Coated gloss black. OEM: 97-1685
+

knob9445-C4
£4.45 (£5.34 inc VAT)
OEM: 82-9445, F9445
Triumph Trident Side Panel Cover Release Knob - T150, T160 Models Side panel securing knob for all Triumph Trident models. Attaches on the left hand side...
+

bolt3097-E2
£4.45 (£5.34 inc VAT)
OEM: 82-3097, F3097, 40-4733
Triumph/BSA Side Stand Swivel Pin / Pivot Bolt - Pre Unit and Unit Models Circa 1950-70 Correct fitment to mount the prop stand on models with a threaded...
+

nut5839-C4
£4.45 (£5.34 inc VAT)
OEM: 29-5839, 82-9050, 40-4810
Footrest Nut - Left Hand Thread - A50 and A65 Models Circa 1962-70 + Triumph/BSA Unit Singles Footrest mounting nut with LH thread as used on BSA A50, A65...
+

cab3682-E12
£4.45 (£5.34 inc VAT)
OEM: 97-3682, H3682
Triumph/BSA Front Brake Cable Guide Bracket - Unit Singles and Twins + T150 Models Circa 1968-73 Locates over the timing side fork leg pinch bolt -...
+

seal2244-C3
£4.45 (£5.34 inc VAT)
OEM: 83-2244, F2244
Triumph/BSA Swinging Arm Pivot Oil Seal - B25, B50 and TR25W and TR5T Models Two required per bike - OIF models from 1971 onwards. OD: 3" (31.9mm) ID:...
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

decal3748-T7
£4.45 (£5.34 inc VAT)
OEM: 60-3748, D3748
Triumph 5 Speed Rear Mudguard Decal - T140, TR7, T150, T160 Models - Circa 1973-87 Self adhesive vinyl sticker generally positioned on the rear mudguard...
+

oddie045-C4
£4.45 (£5.34 inc VAT)
OEM: 68-9287, 60-1006, D1006
BSA/Triumph Side Panel Oddie Stud - Long Type - A50, A65, Bantam D10, D14 and Unit Singles As used on various BSA models including A50, A65, B25, C25,...
+

oddie046-C4
£4.45 (£5.34 inc VAT)
OEM: 68-9223, 60-0982, 60-3159, D982, D3159
BSA/Triumph Side Panel Oddie Stud - Short Type - A50, A65, Bantam D10 and Unit Singles As used on various BSA models including A50, A65, B25, C25, B44,...
+

screw3875-C4
£4.45 (£5.34 inc VAT)
OEM: 82-3875, F3875
Triumph Toolbox/Battery Case Lid Fastener Screw - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid fastening bolt - correct...
+

stand-bolt4793-E2
£4.45 (£5.34 inc VAT)
OEM: 42-4793
BSA Prop Stand Pivot Bolt - A50 / A65 + A and B Group Swinging Arm Models - 1954 Onwards Part threaded prop stand bolt with thin head. Correct fitment on...
+

bolt3619-E2
£4.50 (£5.40 inc VAT)
OEM: 82-3619, F3619
Centre Stand Bolt - Triumph Pre-Unit 350/500/650cc - From 1954-62 Centre stand securing bolt, with flat section for the locking washer. To fit T21, 3TA,...
+

trans276-T7
£4.75 (£5.70 inc VAT)
BSA Piled Arms (Cycles) - Transfer
+

trans324-T7
£4.75 (£5.70 inc VAT)
BSA Piled Arms (MotorCycles) - Transfer
+

spring144-E2
£4.95 (£5.94 inc VAT)
OEM: 90-4733
Centre Stand Spring BSA Bantam D7, D10, D14 Length inside hooks: 4+7/8" (123mm) OEM: 90-4733
+

bear436-F4
£4.95 (£5.94 inc VAT)
OEM: 06-7604
Norton Featherbed Taper Roller Bearing steering conversion for Norton featherbed models (Sold Singularly) OEM: 06-7604 APPROX Measurement: ID-25mm, OD-52mm
+

stand-bolt515-E2
£4.95 (£5.94 inc VAT)
OEM: 82-7021, F7021, 14-1303, 14-0703
Triumph Side Stand Pivot Bolt + Lock Nut - 500/650/750cc Twins and Triples From 1967 Onward Prop stand swivel pin and thin self locking Cleveloc nut....
+

rub191-A4
£4.95 (£5.94 inc VAT)
OEM: 97-2208
Triumph rubber headlamp ear buffer For headlamp bracket mount OEM: 97-2208
+

fknum60
£4.95 (£5.94 inc VAT)
Front Number Plate Blade - in raw metal ready for painting To suit classic motorcycles 27cm long
+

stud3592-C4
£4.95 (£5.94 inc VAT)
OEM: 82-3592, F13592
Frame Stud - Footrest T110 - 82-3592 Used on the Triumph T110 and other models to secure footrest. OEM: 82-3592, F3592
+

nut4343-C3
£4.95 (£5.94 inc VAT)
OEM: 42-4343
Swinging Arm Spindle Nut - BSA - 42-4343 BSA A&B Group Hollow spindle for cross over brake models. Fits A50/A65 pre 1969 models Fits BSA A10, BSA...
+

num2727-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2727
Triumph Rear Number Plate Bracket - Left Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2727
+

num2728-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2728
Triumph Rear Number Plate Bracket - Right Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2728
+

trans4148-T7
£4.95 (£5.94 inc VAT)
OEM: 60-4148
Triumph T140 Bonneville Side Cover Decal - Vermilion and Silver Vermilion (red) background with silver embossed raised lettering Peel off and fix type...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.