.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

strap2952-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 6+5/16" (160mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

screw9947-pair-A4
£0.75 (£0.90 inc VAT)
OEM: 99-9947, 99-7013
Triumph/Norton Rear Lamp Mounting Screws - Triumph 750cc, Norton Commando Pair of screws and washers for Lucas LU917 tail light lens. Triumph TR7, T140,...
+

pantah-screen-13
£54.00 (£64.80 inc VAT)
This will fit Ducati Pantah. Please state which model required for, when ordering. A replica of the originals, made to fit the Pantah 600 fairing Available...

SS-fair-16
£97.00 (£116.40 inc VAT)
Ducati 600/750/900 Super Sport Bikini Fairing - Right Hand Manufactured from fibre glass in Ducati red colour. This means that any chips and scratches...
+

seatfix3792-C2
£19.95 (£23.94 inc VAT)
OEM: 82-3792, F3792
Triumph Dual Seat Rear Bracket - Pre Unit TR5, TR6 and T120 Models Circa 1955-59 Twinseat rear bracket - correct fitment on TR5, TR6 and T120 models circa...
+

stand932
£89.95 (£107.94 inc VAT)
OEM: 82-5932
Triumph Centre Stand for T120, 6T and TR6 Models - 1964-68 Powder coated black OEM: 82-5932 Made in England Made by LF Harris to the original...
+

gait885-C12
£3.45 (£4.14 inc VAT)
OEM: 06-4666, 06-3719
Norton Commando Isolastic Rear Engine Mounting Gaiter for 1968-74 OEM: 06-4666, 06-3719
+

mud4439
£77.95 (£93.54 inc VAT)
OEM: 97-4439, H4439
Triumph Front Mudguard Chrome - 6 Hole - 500/750cc USA Models Circa 1973-74 Correct fitment on T100, T140, TR7 and T150 USA models circa 1973-74. Rolled...
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

stand4762
£149.95 (£179.94 inc VAT)
OEM: 42-4762
BSA Centre Stand - A10 Spitfire / A65 Rocket - No Arm Type Suits A10 Spitfire Scrambler 1958 onwards, A65 Rocket 1963-64, A65 Hornet 1965 and can also be...
+

bolt2603-E2
£2.95 (£3.54 inc VAT)
OEM: 82-2603, F2603
Triumph Side Stand Bolt / Manifold Carb Mounting Bolt - Reduced Head Reduced hex head bolt - correct fitment to mount the prop stand on pre unit models...
+

cab2270-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Enclosed Front Cable Holder / Retainer - OIF Models - White Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

n/plate409-YB-C4
£1.95 (£2.34 inc VAT)
Rear Number Plate Fixing Nuts and Bolts - Yellow/Black Nylon - Pack of 8 Number plate fasteners - Length UH: 1" (25mm) x M6 (6mm) thread. Available in...
 

wash2216-A4
£4.95 (£5.94 inc VAT)
OEM: 83-2210, 83-2216, F12210, F12216, 54525403
BSA / Triumph Wire Stay Bracket To Headlamp Clamping Washer - Various OIF Models Circa 1971-73 Tabbed headlamp clamp washer to secure the headlamp shell...
+

brake0593-C18
£6.95 (£8.34 inc VAT)
OEM: 37-0593, W593, 60-0638, D638
Triumph Front Brake Cable End Clevis - Fork End Overall length: 1+3/8" (35.3mm) OEM: 37-0593, W593,  60-0638, D638
+

mud079
£47.95 (£57.54 inc VAT)
Mudguard 4" Wide - Front - Unpolished Alloy - Universal Blade Unpolished Alloy Curved to fit 21" wheel Flared front lip Both sides and front edge folded...
+

spring561-E2
£2.95 (£3.54 inc VAT)
OEM: 82-3618
Centre Stand Spring Plate - Triumph Pre-Unit Duplex - 1955-59 OEM: 82-3618 Supplied in Stainless Steel Made in England
+

guard2641
£64.95 (£77.94 inc VAT)
OEM: 83-2641
Triumph T140/T120 Chainguard - Black - 83-2641 Rear chain guard for Triumph Bonneville T140 models, and T120R models. Painted in Black Gloss Made in...
+

stand7553
£62.95 (£75.54 inc VAT)
OEM: 83-7553, F17553
Triumph Side Prop Stand - T140 and TR7 Models From 1980 Onwards Non-threaded pivot hole and adjuster bolt hole + ball ended extension arm. Can also...
+

shim3683-C3
£4.95 (£5.94 inc VAT)
OEM: 82-3683, 82-3684, F3683, F3684
Triumph Swinging Arm Spindle Shim Set - All Pre-Unit Models To fit 5T, 6T, TR5, T100, T110 and T120 pre unit models with swinging arm. Set of 4 shims:...
+

stud42-4714-E3
£9.95 (£11.94 inc VAT)
OEM: 42-4714
BSA Centre Stand Pivot Stud - A and B Group Swinging Arm Models Circa 1954-57 Threaded centre stand pin correct fitment on swinging arm A7, A10, B31,...
+

guard7067
£134.95 (£161.94 inc VAT)
OEM: 82-7067, F7067, 82-9853, F9853
Triumph Chainguard - Pre OIF Unit 650cc Models - Deep Fin Type Deep fin version, correct fitment for 650cc unit models from  1963-68. Premium quality -...
+

wash1270-E2
£0.95 (£1.14 inc VAT)
OEM: 83-1270, F11270
Triumph Centre Stand Lock Washer -  650/750cc Models Centre stand pivot bolt tab washer as fitted to Triumph 650cc and T150 & T160 Trident models....
+

peg023
£14.95 (£17.94 inc VAT)
OEM: 29-7560
BSA Pillion Footrest Assembly B Group Swinging Arm models Footrests 4" Bolt diameter 3/8" Bracket length 2+3/4" from swivel bolt to end of mounting bolt...
+

peg026-tri-C10
£14.95 (£17.94 inc VAT)
OEM: 83-3207, 82-9055
Triumph Pillion Footrest Assembly T120 OIF models Footrests 4" Bolt diameter 3/8" Bracket length 2+3/8" from swivel bolt to end of mounting bolt Footrest...
+

peg6672-C4
£1.95 (£2.34 inc VAT)
OEM: 82-6672, F6672
Triumph Oil Tank Mounting Screwed Peg - 350/500/650cc Unit Models Circa 1966-68 As used on 3TA, 5TA, T90, T100, 6T, TR6 and T120 models from 1966-68 Also...
+

fkbrk311
£35.95 (£43.14 inc VAT)
OEM: 02-1731, 02-1732
Pair of AJS / Matchless headlamp brackets Suitable for machines with 1-1/4" forks Powder coated gloss black OEM: 02-1731, 02-1732
+

stand627
£79.95 (£95.94 inc VAT)
OEM: 83-2627
Triumph/BSA Centre Stand - Oil in Frame T120, TR6, A65 Models Circa - 1971-73 Powder coated black. OEM: 83-2627 Made In England Fitting kits - bolts,...
+

spring670-E2
£2.95 (£3.54 inc VAT)
OEM: 82-4670
Centre Stand Spring Plate - Triumph Pre-Unit Duplex - 1960-62 OEM: 82-4670 Supplied in Stainless Steel Made in England
+

bolt4136-C4
£2.95 (£3.54 inc VAT)
OEM: 82-4136, F4136
Triumph Chainguard to Swinging Arm Stepped Bolt - Pre Unit and Unit Twins From 1959 Onwards Stepped chain guard to swinging arm fitting bolt - correct...
+

b/rod-68-7062
£10.95 (£13.14 inc VAT)
OEM: 68-7062
21" BSA Brake Rod - A50 and A65 Models With QD Hub - Circa 1965-70 Rear brake rod - correct fitment on BSA 500/650cc twins with  QD crinkle hub from...
+

fknum47
£27.95 (£33.54 inc VAT)
OEM: 42-6887
Number Plate BSA Boxed type 2 rear no reflector Comes with 4 threaded securing points, and holes for tail light assembly. Distance of bolt holes - 2+7/8"...
+

seatfix7542-C2
£7.95 (£9.54 inc VAT)
OEM: 83-7542
Rear Seat Hinge - Triumph Rear Seat Hinge with stop, as fitted to Oil in Frame models Painted in Gloss black OEM: 83-7542
+

hl-wash2210-A4
£0.45 (£0.54 inc VAT)
OEM: 97-2210, H2210
Triumph Headlight Bracket Washer - OIF 500/750cc Models From 1971 Onwards Headlamp bracket ear backing washer. Correct fitment on later T100 models + disc...
+

strap9255-E4
£14.95 (£17.94 inc VAT)
OEM: 82-9255, F9255
Triumph Front Battery Strap Mounting Bracket - 500/650cc Models Circa 1968-74 Battery carrier front mounting strap - correct fitment on T120 and TR6...
+

strap8028-E4
£14.95 (£17.94 inc VAT)
OEM: 82-8028, F8028
Triumph Rear Battery Strap Mounting Bracket - 500/650cc Models Circa 1968-74 Battery carrier rear mounting strap with rectifier mounting tab. Correct...
+

clip3659-E12
£0.45 (£0.54 inc VAT)
OEM: 60-3659, D3659
Triumph Clutch Cable to Side Panel Spring Clip - T150 Models From 1973 Onwards Locates on the top edge of the left hand / drive side panel to position...
+

mud015-rib
£58.95 (£70.74 inc VAT)
6" Ribbed Steel Rear Mudguard - 19" Wheel - Universal Fit Universal fit - undrilled to fit 19" rear wheel. Both sides + back edge folded. Length...
+

fkbrack001-1
£15.95 (£19.14 inc VAT)
Universal Silencer/Headlamp Bracket Chromed Plated Heavy Duty Bracket Length: 6" (15cm) Height: 3" (10cm) Thickness: 5/32" (4mm) Hole centre to 4 Holes...
+

wash9046
£0.45 (£0.54 inc VAT)
OEM: 82-9046, F9046, 76-8010, 27-5676
BSA/Triumph - 3/8" x 1" Plain Washer - OIF Lower Headlamp Fixing + Universal Use Locates between the rubber grommet and lock nut on the lower part of the...
+

batt-tray8024-E4
£16.95 (£20.34 inc VAT)
OEM: 82-8024, F8024
Triumph Battery Carrier - Unit 350/500/650cc Models Circa 1968-74 Correct fitment on T90, T100, T120 and TR6 Models from 1968 onwards. With lower fixing...

swing4195-C4
£14.95 (£17.94 inc VAT)
OEM: 82-4195, F4195
Triumph Swinging Arm Pin - Unit 350/500cc Twins Circa 1957-66 Correct fitment on all 350 and 500cc unit twins inclusing 3TA, 5TA, T90, T100 from...
+

cab0973-E12
£0.85 (£1.02 inc VAT)
Universal Rubber Cable / Hose Guide - 20mm x 12mm Useful frame protector that can be attached to cables as required. Suitable for fitting onto most...
+

swing2692-C3
£1.45 (£1.74 inc VAT)
OEM: 83-2692, F12692
Triumph/BSA Swinging Arm Pivot Dirt Excluder - Unit OIF 650/750cc Twins Circa 1971-87 Rubber dust seal - locates each end of the swinging arm spindle...
+

seatfix4222-C2
£8.95 (£10.74 inc VAT)
OEM: 82-4222, F4222
Triumph Seat Hinge - Twinseat Unit 350/500/650cc Models Circa 1959-67 Correct fitment on unit 3TA, 5TA, T100, 6T, TR6 and T120 models up to 1967. Plus...
+

mudF-FK2R
£54.95 (£65.94 inc VAT)
4+1/4" Front Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - C Section Made in England using a heavier gauge steel than standard mudguards....
+

mud086A
£132.95 (£159.54 inc VAT)
5" Front Mudguard - Ribbed Steel - 19" Wheel Ribbed centre Raw Steel Curved to fit 19" wheel Both sides folded Made in England Length around curve:...
+

swing-bush049-C3
£6.95 (£8.34 inc VAT)
OEM: 06-0447, 06.0447
Norton Commando Swinging Arm Bearing / Bush - 750/850cc MK1 and MK2 Models - Circa 1969-74 Oilite flanged swinging arm pivot bush - correct fitment on pre...
+

swing8090-C3
£0.95 (£1.14 inc VAT)
OEM: 82-8090, F8090
Triumph Swinging Arm Bobbin O Ring - Unit 650cc Twins + Trident Models Circa 1968-75 Rubber O ring seal - locates between the bobbin and oil seal...
+

fkbrk8
£19.95 (£23.94 inc VAT)
Pair of Universal Headlight Brackets to 38mm 7" Chrome headlight brackets with universal fit rubbers. Outer hole centre is approx 12cm from fork leg when...
+

roll-B29B
£28.95 (£34.74 inc VAT)
OEM: 75-9089
Triumph Motorcycle Service Tool Roll - Black with Gold Logo Service Tool Roll with Gold Trumph Logo Black Vinyl - tie up type tool roll 8 Tool Slots...
+

nut1809-A4
£2.95 (£3.54 inc VAT)
OEM: 21-1809, S1809
BSA / Triumph Headlamp Bracket Wire Stay Top Domed Nut - Various OIF Models Circa 1971-73 Domed nut to secure the top section of the left and right hand...
+

swing3798-C3
£1.95 (£2.34 inc VAT)
OEM: 82-3798, F3798
Triumph Swinging Arm Spindle End Cap - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66 Swinging arm end cap - correct fitment on: Pre unit 5T,...
+

spring693-E2
£14.95 (£17.94 inc VAT)
OEM: 06-2514, 06-2592
Norton Commando 750cc 1971-73 - Stand Spring kit - 06-2514, 06-2592 This kit includes both the centre stand spring and the prop stand spring. Made in...
+

stay97-1683
£18.95 (£22.74 inc VAT)
OEM: 97-1683, H1683
Triumph Front Mudguard Centre Stay / Bridge - Unit 350/500/650cc + T20 Tiger Cub Models Circa 1964-70 Two tab front mudguard centre bridge as used on...
+

spring-kit951-E3
£8.95 (£10.74 inc VAT)
Triumph Late Unit T140 Centre Stand Fixing Kit - 1980 Onwards Kit comprises of 7 pieces: 2x pivot bolts - 14-0147 2x pivot bush - 83-7460 2x nuts -...
+

shrouds5009
£47.95 (£57.54 inc VAT)
OEM: 67-5009
BSA Fork Shrouds - A, B and M Group Models With 'Cowpat' Headlamp Cowl - Circa 1953-57 Pair of fork outer sleeves - correct fitment on telescopic forks...
+

nut2725-E2
£1.25 (£1.50 inc VAT)
OEM: 82-2725, F2725
Triumph Centre Stand Pivot Nut - Pre Unit and Unit Models Circa 1954-70 Thin nut used to secure the two main stand pivot bolts to the frame. Correct...
+

peg026-bsa-C10
£14.95 (£17.94 inc VAT)
OEM: 83-3207, 82-9055
BSA Pillion Footrest Assembly A65 OIF models Footrests 4" Bolt diameter 3/8" Bracket length 2+3/8" from swivel bolt to end of mounting bolt Footrest...
+

seatfix3061-C2
£9.95 (£11.94 inc VAT)
OEM: 83-3061, F13061
Triumph / BSA Seat Catch Assembly - Suitcase Type - OIF Models Circa 1971-72 Correct fitment on OIF TR6, T120, A65 and A70 models with the seat hinges...

spring563-C4
£3.45 (£4.14 inc VAT)
OEM: 83-7070, F17070
Triumph T140 Side Panel Spring - 83-7070 Triumph T140 Bonneville Side Panel Spring, holds the 2 side panels together Normally 2 per bike required. Length...
+

num2728-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2728
Triumph Rear Number Plate Bracket - Right Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2728
+

fkswing411-C4
£6.95 (£8.34 inc VAT)
OEM: 82-8475
BSA / Triumph Swinging Arm Bush - A75 Rocket 3 + X75 Hurricane Models Correct fitment on  BSA A75 Rocket 3 MK1 and MK2 models circa 1969-72 + Triumph X75...
+

stay4534
£21.95 (£26.34 inc VAT)
OEM: 97-4534, 97-4550, 97-4442
Triumph Front Mudguard Centre Stay - T140, TR7 and T150 Models Circa 1973-76 Top middle mudguard brace with fixing tabs - correct fitment on T140, TR7 and...
+

guard7709
£31.95 (£38.34 inc VAT)
OEM: 90-7709
BSA Chainguard - Raw Steel - Bantam D1 Rigid Frame 1949-63 Raw steel - Made in England OEM: 90-7709
+

tenpart3556-C3
£3.95 (£4.74 inc VAT)
OEM: 83-3556, F3556
Triumph/BSA Chain Adjuster Snail Cam - B25, B50 and TR25W and TR5T Models Swinging arm pivot/rear chain tensioner plate as fitted to OIF models from 1971...
+

guard0016
£32.95 (£39.54 inc VAT)
OEM: 850016
Harris Matchless G80 Chainguard - Black Powder Coated Rear chain guard for Harris Matchless G80 Model Black powder coated Overall length: 26" (65cm)...
+

wash2417
£0.45 (£0.54 inc VAT)
OEM: 60-2417, D2417, 60-4250, D4250, S26-2
Triumph - 1/4" Spring Washer - Various Uses On Pre Unit and Unit Models As used extensively on both pre unit and unit models + universal use as required....
+

spring4671-E2
£3.95 (£4.74 inc VAT)
OEM: 82-4671, F4671
Triumph Centre Stand Spring - Pre Unit and Unit 650cc Models + T150/160 Models Correct fitment on pre-unit and unit 650cc models from 1960-70. Also fits...
+

bevel-mud-05
£55.75 (£66.90 inc VAT)
Ducati Bevelhead Front Mudguard Supplied in straight from mould, may require finishing of edges and preparation prior to painting.
+

rail9152
£79.95 (£95.94 inc VAT)
OEM: 41-9152
BSA Pillion Grab Rail / Lifting Handle - C25, B25, B40, B44 Models Circa 1967-70 Correct for BSA unit singles from 1967-70 - C25, B25, Starfire,...
+

num2727-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2727
Triumph Rear Number Plate Bracket - Left Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2727
+

b/rod-82-4093
£10.95 (£13.14 inc VAT)
OEM: 82-4093, F4093
19" Brake Rod - Triumph T20 Tiger Cub Models - Circa 1957-69 Correct fitment on Triumph T20 Tiger Cub models from 1957 onwards. Length: 19" (48.3cm)...
+

spring-kit950-E2
£11.95 (£14.34 inc VAT)
Triumph Pre Unit Duplex Frame Centre Stand Fixing Kit - 500/650cc from 1960-62 Kit comprises of 7 pieces: 2x pivot bolts -  82-3619 (1/2"x20tpi CEI) 2x...
+

mudF1675-160
£69.95 (£83.94 inc VAT)
OEM: 97-1675, H1675
Triumph Front Mudguard - 350/500/650cc Models Circa 1964-67 - Raw Steel Correct fork indents and bend for T90, T100, T120 and TR6 Models from 1964-67....
+

nut7389-C4
£3.95 (£4.74 inc VAT)
OEM: 82-7389, F7389
Triumph Engine Plate To Frame Nut - 650 Twins + 750cc Triples - 1967 Onwards - UNF Thread Rear engine plate to frame shouldered nut as used on T120, TR6...
+

stay6851-C2
£11.95 (£14.34 inc VAT)
OEM: 82-6851, F6851
Triumph Rear Mudguard Bracket - Unit 6T, TR6 and T120 + T150 Models Circa 1966-74 Rear mudguard mounting bracket - locates at the front of the mudguard....
+

peg7510-C4
£2.45 (£2.94 inc VAT)
OEM: 82-7510, F7510
Triumph Oil Tank Mounting Screwed Peg - 500/650/750cc Unit Models Circa 1968-74 - UNF Thread As used on T100, TR6, T120, T150 and T160 models from 1969...
+

peg020-C10
£14.95 (£17.94 inc VAT)
OEM: 65-4895
BSA Pillion Footrest Assembly B Group Rigid frame models Footrests 4" Bolt diameter 3/8" Bracket length 3+3/4" from swivel bolt to end of mounting bolt...
+

seatfix2087-C2
£6.95 (£8.34 inc VAT)
OEM: 60-2087, D2087
Triumph Dual Seat Check Wire - 650/750cc OIF Models - 1971 Onwards Correct fitment on OIF T120, T140, T150, T160 models with dual hinged seat. Plastic...
+

clips250-C4
£1.95 (£2.34 inc VAT)
Fairing or Panel Spire Clips and Screws - Pack of 10 - Self-Tapping Type Universal fairing or panel spire spring clips and self-tapping screws. Zinc...
+

roll-B29
£31.95 (£38.34 inc VAT)
OEM: 75-9089
BSA Motorcycle Service Tool Roll - Black with Gold Logo Service Tool Roll with Gold BSA Logo Black Vinyl - tie up type tool roll 8 Tool Slots Folded...
+

m/brack7826-C2
£14.95 (£17.94 inc VAT)
OEM: 82-7826, F7826
Triumph Rear Mudguard Wiring Protector - Unit 500/650cc Models Circa 1969-74 + T150 Models Rear mudguard / tail light wiring protector. Correct fitment...
+

stud1800-C4
£2.95 (£3.54 inc VAT)
OEM: 21-1800, S1800
Triumph Footrest Stud - 21-1800 Stud securing footrest to frame, many Triumph models OEM: 21-1800, S1800
+

b/rod-41-7037
£14.95 (£17.94 inc VAT)
OEM: 41-7037, 82-9036, F9036
19" BSA/Triumph Brake Rod - B25, C25, B40, B44 and TR25W Models - Circa 1967-71 Rear brake rod - correct fitment on BSA and Triumph unit singles circa...
+

washer2321
£0.25 (£0.30 inc VAT)
OEM: 60-2321, D2321, S19-3, GS203, 70-8088, E8088
BSA/Triumph - 5/16" Thick Flat Washer - Various Uses On Pre Unit and Unit Models As used extensively on many BSA + pre unit and unit Triumph models +...
+

buck9355-E4
£5.95 (£7.14 inc VAT)
OEM: 82-9355, F9355
Triumph Battery Strap Anchorage Buckle - Later T140 and TR7 Models + T150 and T160 Models Correct fitment on later T140 and TR7 models from 1978 onwards...
+

bolt0251-B19
£1.45 (£1.74 inc VAT)
OEM: 14-0251, 14-251
7/16" UNF - 2+3/4" Hexagonal Bolt - Part Threaded - 14-0251 As used on various unit Triumph models - footrest mounting, engine plates + universal use, as...
+

spring909-E2
£5.95 (£7.14 inc VAT)
OEM: 06-2592
Norton Commando 750cc, 850cc prop stand spring (1971-76). (Side Stand Spring) Length inside hooks: 7" (175mm) OEM: 06-2592
+

rub062-C12
£2.95 (£3.54 inc VAT)
OEM: 06-0636, 060636
Norton Commando Oil Tank Mounting Rubber Bobbin - 06-0636 Rubber with threaded stud at each end. OEM: 06-0636, 060636
+

decal3748-T7
£4.45 (£5.34 inc VAT)
OEM: 60-3748, D3748
Triumph 5 Speed Rear Mudguard Decal - T140, TR7, T150, T160 Models - Circa 1973-87 Self adhesive vinyl sticker generally positioned on the rear mudguard...
+

trans1816-T7
£2.95 (£3.54 inc VAT)
OEM: 60-1816, D1816
Drain Oil and Refill Every 1,500 Miles Transfer - Triumph Models + Universal Fit Gold on clear vinyl decal featuring IMPORTANT - DRAIN OIL AND REFIL EVERY...
+

swing0620-C4
£15.95 (£19.14 inc VAT)
OEM: 21-0620, S620, 21-0591, S591
Swing Arm Pin - Triumph - 21-0620 Fits many of the Triumph Models Can be used for 21-0591, S591 as well. OEM: 21-0620, S620
+

wash2266-C3
£0.95 (£1.14 inc VAT)
OEM: 83-2266, F12266
Triumph Rear Wheel Spindle / Swinging Arm Pivot Washer - OIF 650/750cc Twins Circa 1971-85 Flat washer for use on both the rear wheel spindle and...
+

sleeve3227-C4
£1.95 (£2.34 inc VAT)
OEM: 82-3227, F3227
Triumph Toolbox/Battery Case Lid Aluminium Grommet - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid centre sleeve - correct...
+

stay907-C2
£3.95 (£4.74 inc VAT)
OEM: 97-4022
Triumph/BSA Front Mudguard Bracket - 97-4022 Fixing Bracket for wire stay type front mudguards (1971-72). As fitted to Triumph TR6 and T120 Oil in Frame,...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.