.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame Parts

seal2244-C3
£4.45 (£5.34 inc VAT)
OEM: 83-2244, F2244
Triumph/BSA Swinging Arm Pivot Oil Seal - B25, B50 and TR25W and TR5T Models Two required per bike - OIF models from 1971 onwards. OD: 3" (31.9mm) ID:...
+

wash0660
£0.65 (£0.78 inc VAT)
OEM: 30-0660, 30-660
BSA - 7/16" Plain Washer - Fuel Tank and Frame + Universal Use Rear fuel bank support bolt washer on rigid and plunger frame C10, C11, B31, B32, B33,...
+

stud42-4714-E3
£9.95 (£11.94 inc VAT)
OEM: 42-4714
BSA Centre Stand Pivot Stud - A and B Group Swinging Arm Models Circa 1954-57 Threaded centre stand pin correct fitment on swinging arm A7, A10, B31,...
+

wash5679-E2
£0.75 (£0.90 inc VAT)
OEM: 82-5679, F5679
Triumph Centre Stand Bolt Washer - Unit 350/500/650cc + Early T150 Models Plain flat washer locates over the bolt on the inner side of the stand lug....
+

stays4088/90
£43.95 (£52.74 inc VAT)
OEM: 97-4088, 97-4090, H4088, H4090
Triumph/BSA Headlamp Mounting Wire Stays - A65 Firebird Scrambler and TR6C Models Circa 1971-72 Pair of chrome plated headlight mounting stays suitable...
+

fkmud34
£95.95 (£115.14 inc VAT)
Mudguard 6" wide Rear Stainless Steel universal blade polished finish for 18/19" wheel Length around curve: 128cm Width - outside edge to outside...
+

rub26
£10.95 (£13.14 inc VAT)
OEM: 04-0370
Footrest Rubber Norton - Bicycle Style Suit earlier Nortons pre 1956 Branded - NORTON 3+3/4" Long 2+1/4" Wide Priced per PAIR OEM: 04-0370
+

bear344k-F4
£41.95 (£50.34 inc VAT)
Steering Race Ball End Conversion Kit for BSA A, B and M Group models. Suit BSA models including A10, A65, B31, M21 etc. Sealed type ball bearing...
+

fkswing256-C4
£29.95 (£35.94 inc VAT)
OEM: 40-4215
SWINGING ARM PIN - BSA BSA C15, B40 Early Models Fine thread 26 tpi swinging arm spindle Made in England OEM: 40-4215
+

seatfix7542-C2
£7.95 (£9.54 inc VAT)
OEM: 83-7542
Rear Seat Hinge - Triumph Rear Seat Hinge with stop, as fitted to Oil in Frame models Painted in Gloss black OEM: 83-7542
+

num2727-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2727
Triumph Rear Number Plate Bracket - Left Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2727
+

num2728-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2728
Triumph Rear Number Plate Bracket - Right Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2728
+

fkswing355-S-C4
£18.95 (£22.74 inc VAT)
OEM: 42-4112
BSA Solid Type Swinging Arm Spindle - A and B Group Models Circa 1954-57 Solid swinging arm spindle - correct fitment on A7, A10, B31, B32, B33 and B34...
+

spr2835-C7
£37.95 (£45.54 inc VAT)
OEM: 82-2835
Pair of 7" Conical Seat Springs - Triumph Rigid Pre-Unit Models Correct for Triumph pre-unit rigid frame models, plus other custom applications...
+

wash1270-E2
£0.95 (£1.14 inc VAT)
OEM: 83-1270, F11270
Triumph Centre Stand Lock Washer -  650/750cc Models Centre stand pivot bolt tab washer as fitted to Triumph 650cc and T150 & T160 Trident models....
+

grom1114-C7
£1.55 (£1.86 inc VAT)
Universal Rubber Grommet  - OD: 20mm, ID: 9mm x Depth: 10mm OD: 25/32" (20mm) ID: 11/32" (9mm) Depth: 13/32" (10mm)
+

mud4439
£77.95 (£93.54 inc VAT)
OEM: 97-4439, H4439
Triumph Front Mudguard Chrome - 6 Hole - 500/750cc Models Circa 1973-74 Correct fitment on T100, T140, TR7 and T150 models circa 1973-74. Rolled edges...
+

stand4729
£51.95 (£62.34 inc VAT)
OEM: 90-4729
BSA / Triumph Centre Stand - Bantam D7, D10, D14 + T20 Super Cub Correct fitment for BSA Bantam D7, D10, D14 models circa 1960-71 and Triumph Super Cub...
+

hl-wash2210-A4
£0.45 (£0.54 inc VAT)
OEM: 97-2210, H2210
Triumph Headlight Bracket Washer - OIF 500/750cc Models From 1971 Onwards Headlamp bracket ear backing washer. Correct fitment on later T100 models + disc...
+

swing3797-C3
£2.45 (£2.94 inc VAT)
OEM: 82-3797, F3797
Triumph Swinging Arm Spindle Rod - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66 Swinging arm end cap retaining pin - correct fitment on:...
+

f/rub9603
£8.95 (£10.74 inc VAT)
OEM: 82-9603
BSA Pillion Footrest Rubbers - Pair - Long Type - Embossed With Logo - UK Made As fitted to various BSA singles and twins circa 1962-73 including A50,...
+

swing2690-C3
£1.25 (£1.50 inc VAT)
OEM: 83-2690, F12690
Triumph/BSA Swinging Arm Pivot RH Distance Piece - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot right hand spacer / thick washer. Correct fitment...
+

mudR1617-132
£89.95 (£107.94 inc VAT)
OEM: 83-1617, F11617, 82-8143, F8143
Triumph Rear Mudguard - 500/650cc Models Circa 1968-70 - Raw Steel Correct indents and cutaways for T100R, T100C, T120R, TR6C and TR6R Models from...
+

n/plate409-YB-C4
£1.95 (£2.34 inc VAT)
Rear Number Plate Fixing Nuts and Bolts - Yellow/Black Nylon - Pack of 8 Number plate fasteners - Length UH: 1" (25mm) x M6 (6mm) thread. Available in...
 

nut-S4-13-C4
£1.45 (£1.74 inc VAT)
OEM: S4 13, S4-13
Triumph Footrest To Engine Plate Nut - 650cc Models Circa 1964-68 Footrest mounting nut as used on T120 and TR6 from 1964-68. Stud and dowel also...
+

num4784-C4
£6.95 (£8.34 inc VAT)
OEM: 83-4784, F14784
Triumph Rear Number Plate Top Bracket - 750cc Twins and Triples + TR5T Models - 1973 Onwards Top rear number plate bracket - correct fitment on T140,...
+

s/cov-9715-006
£42.95 (£51.54 inc VAT)
OEM: 82-9715, F9715, 60-0696, D696, 60-0697, D697
Triumph Replacement Seat Cover - Unit 500/650cc Twins + T150 Models Circa 1969-74 Replacement seat cover with embossed basket weave top and gold Triumph...
+

brk068
£30.95 (£37.14 inc VAT)
Universal Headlight Bracket 35mm (1+3/8") Rubber bush, chrome bracket. Nylon headlamp mounts. Headlamp mount centre approx 4+1/2" from centre of fork bush...
+

seatrub963m-C2
£1.95 (£2.34 inc VAT)
OEM: 82-9085, 82-7835
SEAT BUFFER RUBBER - Triumph Triumph buffer rubber (1967-70) OEM: 82-9085, 82-7835
+

seatfix309-C2
£10.95 (£13.14 inc VAT)
OEM: 06-4009, 06-0647
SEAT SECURING KNOB - Norton Norton 750/850cc Commando Alloy Seat securing Knob (1968-75) The Commando's 1968-74 require 2, and the Mk 3 just one....
+

mud079
£47.95 (£57.54 inc VAT)
Mudguard 4" Wide - Front - Unpolished Alloy - Universal Blade Unpolished Alloy Curved to fit 21" wheel Flared front lip Both sides and front edge folded...
+

knob9132-C4
£13.95 (£16.74 inc VAT)
OEM: 29-9132
BSA Tool Box Knob - A7, A10, C10, C10L, C11, C11G Models From 1946-57 Tool box lid slotted screw - rigid and plunger A Group models + C10 and C11 models....
+

strap2950-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 5+9/16" (141mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

trans8111-T7
£2.45 (£2.94 inc VAT)
OEM: 68-8111
BSA A65 Hornet Tank Transfer Black, white, red and gold on clear vinyl decal featuring BSA Hornet emblem and checkered flags. Height: 3" (76mm) Width:...
+

stay6851-C2
£11.95 (£14.34 inc VAT)
OEM: 82-6851, F6851
Triumph Rear Mudguard Bracket - Unit 6T, TR6 and T120 + T150 Models Circa 1966-74 Rear mudguard mounting bracket - locates at the front of the mudguard....
+

swing8090-C3
£0.95 (£1.14 inc VAT)
OEM: 82-8090, F8090
Triumph Swinging Arm Bobbin O Ring - Unit 650cc Twins + Trident Models Circa 1968-75 Rubber O ring seal - locates between the bobbin and oil seal...
+

trans2104-T7
£2.95 (£3.54 inc VAT)
OEM: 60-2104, D2104
Triumph Trophy 650 Side Panel Transfer / Decal - TR6 Models Circa 1970-72 Gold on clear vinyl decal featuring TROPHY 650. Typically used on the side...
+

fknum51
£34.95 (£41.94 inc VAT)
OEM: NM19343
Number Plate AJS, Matchless, Norton Width 9", Height 9" Supplied in black. Takes a Lucas 564 type tail light OEM:  NM19343
+

numplate048
£33.95 (£40.74 inc VAT)
OEM: 65-6819
BSA Open Type Rear number plate with Reflector Provision. Fits A10, A7 etc Length top to bottom of plate: 10" (26cm) Width 7+1/2"(190mm) Holes for rear...
+

screw9947-pair-A4
£0.75 (£0.90 inc VAT)
OEM: 99-9947, 99-7013
Triumph/Norton Rear Lamp Mounting Screws - Triumph 750cc, Norton Commando Pair of screws and washers for Lucas LU917 tail light lens. Triumph TR7, T140,...
+

mudR-FK4A
£74.95 (£89.94 inc VAT)
5+5/8" Rear Mudguard - Polished Alloy - 18/19" Wheel - Heavy Duty - D Section Made in England using a heavier gauge alloy than standard mudguards....
+

mudF-FK1A
£55.95 (£67.14 inc VAT)
Extra Long 3+7/8" Front Mudguard - Polished Alloy - 18/19" Wheel - Heavy Duty - C Section Made in England using a heavier alloy than standard mudguards....
+

mudR-FK4R
£59.95 (£71.94 inc VAT)
Extra Long 5+3/4" Rear Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - D Section Made in England using a heavier gauge steel than standard mudguards....
+

swing0120-C4
£35.95 (£43.14 inc VAT)
OEM: 82-7342, F7342, 82-7343, F7343, 82-4076, F4076
Triumph Swinging Arm Spindle Set - Later Unit 350/500cc Models Circa 1967-74 Complete swinging arm spindle set including pin, pivot bushes and tab...
+

panel5394
£72.95 (£87.54 inc VAT)
OEM: 82-5394, F5394
Triumph Left Side Panel - Two Switch Holes - 650cc Unit Models Circa 1963-65 Steel near side panel - powder coated gloss black. Vertical top brackets as...
+

stand4712
£63.95 (£76.74 inc VAT)
OEM: 82-4712, F4712
Triumph 8+1/2" Side Stand / Prop Stand - Duplex Frame Pre Unit 6T and T110 + Unit TR6 Models Suitable for pre unit T110 and 6T models from 1960-62 - 18"...
+

swing7848-C3
£4.95 (£5.94 inc VAT)
OEM: 82-7848, F7848
Triumph/BSA Swinging Arm Flanged Washer / O Ring Housing - 650cc Twins + Trident Models Circa 1968-75 Swinging arm pivot oil seal housing - locates on...
+

swing2689-C3
£2.45 (£2.94 inc VAT)
OEM: 83-2689, F12689
Triumph/BSA Swinging Arm Pivot LH Distance Piece - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot left hand spacer / thick washer. Correct fitment...
+

trans295-175-T7
£1.95 (£2.34 inc VAT)
BSA Piled Arms Trademark Rear Number Plate Transfer - 175, 250, 350, 500, 600 or 650cc Gold on clear vinyl decal featuring the BSA Piled Arms Trademark +...
 

stud5942-C4
£2.95 (£3.54 inc VAT)
OEM: 82-5942, F5942
Triumph Footrest To Engine Plate Stud - 650cc Models Circa 1964-68 Footrest mounting stud as used on T120 and TR6 from 1964-68. Overall length: 1+5/8"...
+

mudR7031-143
£189.95 (£227.94 inc VAT)
OEM: 83-7031, F17031
Triumph T140 / TR7 Chrome Plated Rear Mudguard - Disc Brake Models Circa 1976-78 Correct fitment on 750cc twins with rear WM3-18 rim, cotton reel hub and...
+

brkt056-E4
£14.95 (£17.94 inc VAT)
OEM: 42-4515
BSA A and B Group (Swinging Arm Models) Battery carrier tray OEM: 42-4515
+

stay4534
£21.95 (£26.34 inc VAT)
OEM: 97-4534, 97-4550, 97-4442
Triumph Front Mudguard Centre Stay - T140, TR7 and T150 Models Circa 1973-76 Top middle mudguard brace with fixing tabs - correct fitment on T140, TR7 and...
+

bag0291
£21.95 (£26.34 inc VAT)
OEM: 60-0291
Triumph Motorcycle Tool Roll/Pouch - Black with Gold Logo Tool Roll/Bag with Gold Triumph Logo Black Vinyl - tie up type tool roll Pouch area measures...
+

stand3723/19
£61.95 (£74.34 inc VAT)
OEM: 82-3723, F3723
Triumph Side Stand / Prop Stand - 650cc Duplex Frame With 19" Rear Wheel - Circa 1960-62 Triumph TR6, T120 models with Duplex frame from 1960-62, f...
+

clip115-C4
£3.95 (£4.74 inc VAT)
D-Ring DZUS Fastener - Universal Quick Release Fairing or Panel Clip Allows for quick removal and replacement of fairings and body panels. Spring...
+

stand4769
£189.95 (£227.94 inc VAT)
OEM: 42-4769, 42-4765
BSA Side Stand / Prop Stand - A7, A10, B31, B33 Swinging Arm Models - 1954-62 Suitable for swinging arm models with  half lug on frame. A7, A10 models...
+

mudF-FK1R
£54.95 (£65.94 inc VAT)
Extra Long 3+7/8" Front Mudguard - Raw Steel - 18/19" Wheel - Heavy Duty - C Section Made in England using a heavier gauge steel than standard...
+

stud4804-C4
£18.95 (£22.74 inc VAT)
OEM: 68-4804
BSA Left Hand Footrest Stud - A50 and A65 Models Circa 1962-69 Stud to secure the LH / near side footrest to frame. Left hand thread + splined centre...
+

decal1918-T7
£1.75 (£2.10 inc VAT)
OEM: 60-1918, D1918
Triumph Tiger 650 Decal - Gold Water Slide Type Water slide side panel or tank top transfer for Triumph TR6R Tiger models from 1966-68. Length: 3+3/4"...
+

panel6964
£69.95 (£83.94 inc VAT)
OEM: 82-6964, F6964
Triumph Left Side Panel - No Switch Holes - 350/500cc Unit Models - 1966-67 Steel near side panel - powder coated gloss black. Horizontal top brackets -...
+

nut4116-C3
£2.95 (£3.54 inc VAT)
OEM: 42-4116
BSA Solid Type Swinging Arm Spindle Nut - A and B Group Models Circa 1954-57 Solid swinging arm spindle standard nut - correct fitment on A7, A10, B31,...
+

panel8614
£79.95 (£95.94 inc VAT)
OEM: 82-8614, F8614
BSA/Triumph Left Side Panel - B44VS Models Circa 1968-70 + 1970 B44SS, B25 and TR25W Models Steel near side / drivers side panel as fitted to B44 Victor...
+

wash3574-C3
£0.75 (£0.90 inc VAT)
OEM: 82-3574, F3574
Triumph Swinging Arm Spindle Spacer Washer - Pre-Unit Models Circa 1954-62 Locates over the swinging arm spindle and used in conjunction with the shims...
+

stud1023-C4
£2.45 (£2.94 inc VAT)
OEM: 70-1023, E1023
Triumph T20 Sub Frame to Front Frame Stud - Tiger Cub Sports Models Circa 1960-68 Locates through the lug on the top rear section of the main frame to...
+

clip0301-C4
£9.95 (£11.94 inc VAT)
OEM: 40-0301, 40-301
BSA C15 Frame to Head Steady Clip - All Models Circa 1959-67 With Gooseneck Frame Positions on the frame behind the tank mounting bolt to support the head...
+

bolt0254-B19
£1.75 (£2.10 inc VAT)
OEM: 14-0254, 14-254
7/16" UNF - 3+1/2" Hexagonal Bolt - Part Threaded - 14-0254 Front engine to frame mounting bolt on T120R, TR6R, TR6C, T140, TR7 and T150 models +...
+

lyc-cov305-sml
£37.95 (£45.54 inc VAT)
OEM: 29-9335
Small Lycett Type Single Seat / Saddle Cover Solo saddle cover to fit your existing frame. Upholstered in black leather effect vinyl with  riveted...
+

fkbrk10
£8.95 (£10.74 inc VAT)
Universal Fairing Fixing Kit. Suit Small handlebar type fairing.
+

fkbrk7
£20.95 (£25.14 inc VAT)
Pair of Universal Headlight Bracket 30-38mm Chromed bracket to clamp around front forks, variable clamp adjustment between 30mm and 38mm. Outer hole centre...

bear217
£2.99 (£3.59 inc VAT)
OEM: 37-7041, 06-7604, 57-1070
Sealed type ball bearing for Norton Commando steering head bearing. 2 Required per bike Sold singly. OEM: 37-7041, 06-7604, 57-1070 APPROX Measurement:...
+

fkbrk123
£7.95 (£9.54 inc VAT)
OEM: 97-4121
Triumph TR7/T140 Headlamp Fixing Ear Painted in gloss black, but may require finishing and re-painting to achieve better final finish Fits Triumph Disc...
+

fkbrk311
£35.95 (£43.14 inc VAT)
OEM: 02-1731, 02-1732
Pair of AJS / Matchless headlamp brackets Suitable for machines with 1-1/4" forks Powder coated gloss black OEM: 02-1731, 02-1732
+

nut451-C3
£11.99 (£14.39 inc VAT)
OEM: 29-5291
BSA Steering Stem Nut Fits C10, C10L (1948-53), C11, C11G (1948-58) and C12 (1956-58) Chrome plated Compatible Sleeve is: FKNUT452 OEM: 29-5291
+

fkref142-A7
£11.95 (£14.34 inc VAT)
OEM: LU57111, 19-0943, 99-1030
SHIELD SHAPE REFLECTOR - Lucas Pattern Lucas Red rear side reflector for BSA B25/B44/C25/A50/A65 and Triumph US spec 500/650 models, TR25. (1968-70)...
+

stay97-3886
£21.95 (£26.34 inc VAT)
OEM: 97-3886
Triumph Mudguard Stay - Long Bottom 97-3886 Bottom long stay for Triumph Motorcycle Mudguard OEM: 97-3886 Made in England
+

spring561-E2
£2.95 (£3.54 inc VAT)
OEM: 82-3618
Centre Stand Spring Plate - Triumph Pre-Unit Duplex - 1955-59 OEM: 82-3618 Supplied in Stainless Steel Made in England
+

swing4115-pair-C3
£59.95 (£71.94 inc VAT)
OEM: 42-4115
BSA Swinging Arm Bushes - Small Bore Pair of small bore silent block metalastic swinging arm bushes - A7, A10 and B group models. Approximate bore size:...
+

stud3592-C4
£4.95 (£5.94 inc VAT)
OEM: 82-3592, F13592
Frame Stud - Footrest T110 - 82-3592 Used on the Triumph T110 and other models to secure footrest. OEM: 82-3592, F3592
+

stud4682-B14
£3.95 (£4.74 inc VAT)
OEM: 82-4682, F14682
Frame Engine Stud - Triumph - 82-4682 Used on the Triumph engine to Frame. OEM: 82-4682, F14682
+

b/rod-83-2860
£14.95 (£17.94 inc VAT)
OEM: 83-2860, F12860
Brake Rod - Triumph Later Models - 83-2860 Connects foot pedal to rear brake arm. Suit later model T120, T140 etc. available as standard, Chromed Steel,...

guard7730
£119.95 (£143.94 inc VAT)
OEM: 42-7730
BSA Chainguard - A7, A10, B31, B33 - Swinging Arm Models from 1956-62 Length: 22+1/4" Mounting holes (top and bottom) 6+1/4" between centres. Please...
+

guard0016
£32.95 (£39.54 inc VAT)
OEM: 850016
Harris Matchless G80 Chainguard - Black Powder Coated Rear chain guard for Harris Matchless G80 Model Black powder coated Overall length: 26" (65cm)...
+

nut4800H-C4
£1.45 (£1.74 inc VAT)
OEM: 83-4800, F14800
Triumph Rear Lamp Sleeve Nut - T140, T150, T160, TR7  Tail light attachment securing nut for T140, T150, T160 & TR7 models Length: 9/16" (13.7mm) OD:...
+

strap2951-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 6+5/16" (160mm) Long - Closed Loop + Open Bar Strong rubber band with integral closed metal brackets at one end and...
+

strap2943-E4
£2.45 (£2.94 inc VAT)
Universal Rubber Battery Strap - 3+7/16" (87mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

plate4818-C4
£6.45 (£7.74 inc VAT)
OEM: 40-4818, 82-9048, F9048
BSA Footrest Splined Locking Plate - A50 and A65 Models Circa 1962-69 + Triumph/BSA Unit Singles Footrest stud locking plate as used on BSA A50, A65 and...
+

panel5394P
£69.95 (£83.94 inc VAT)
OEM: 82-5394, F5394
Triumph Left Side Panel - No Switch Holes - 650cc Unit Models Circa 1963-65 Steel near side panel - powder coated gloss black. Vertical top brackets as...
+

wash8740
£0.95 (£1.14 inc VAT)
OEM: 29-8740
BSA - 9/16" Plain Washer - Frame, Fuel Tank and Speedo Drive Fitting + Universal Use Locates under the petrol tank fixing socket bolt the top section of...
+

clip3659-E12
£0.45 (£0.54 inc VAT)
OEM: 60-3659, D3659
Triumph Clutch Cable to Side Panel Spring Clip - T150 Models From 1973 Onwards Locates on the top edge of the left hand / drive side panel to position...
+

nut450b-C3
£7.45 (£8.94 inc VAT)
OEM: 40-5018, 90-5257
BSA Steering Stem Nut - Bantam D7, D10, D14 + C15, B25, B40 Models Fits BSA Bantam D7/D10 (1958-67), D14 (1968-71), C15 (1959-67), B25 (1967-70), B40...
+

stay4600-C2
£9.95 (£11.94 inc VAT)
OEM: 83-4600, F14600
Triumph Rear Mudguard Bridge - T140 / TR7 Models Circa 1973-79 Rear mudguard mounting bracket - locates between shock absorber mounting bolts. Correct...
+

stay97-1683
£18.95 (£22.74 inc VAT)
OEM: 97-1683, H1683
Triumph Front Mudguard Centre Stay / Bridge - Unit 350/500/650cc + T20 Tiger Cub Models Circa 1964-70 Two tab front mudguard centre bridge as used on...
+

washer2321
£0.25 (£0.30 inc VAT)
OEM: 60-2321, D2321, S19-3, GS203, 70-8088, E8088
BSA/Triumph - 5/16" Thick Flat Washer - Various Uses On Pre Unit and Unit Models As used extensively on many BSA + pre unit and unit Triumph models +...
+

nut1813-B14
£0.45 (£0.54 inc VAT)
OEM: 02-1813
3/8" x 26 CEI Nut - BSA Bantam Centre Stand Pivot Bolt Nut + Universal Use Centre stand pivot pin lock nut on BSA Bantam D7, D10, D14 models circa...
+

shrouds2161
£114.95 (£137.94 inc VAT)
OEM: 97-1887, 97-1888, H1887, H1888
Triumph Head Lamp Shroud Brackets - Pair - 97-2161, 97-2162 Fork Stanchion Upper Shroud Painted Gloss Black Sold as a Pair Made in England OEM:...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.