.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

bolt2077-E2
£3.65 (£4.38 inc VAT)
OEM: 21-2077, S2077
Centre Stand Bolt - Triumph/BSA - 21-2077 Centre stand securing bolt. Suit late model Triumh and BSA oil in frame models OEM: 21-2077, S2077
+

spring3617-E2
£3.95 (£4.74 inc VAT)
OEM: 82-3617, F3617
Triumph Centre Stand Spring - Pre Unit 650cc Models Circa 1954-60 + 350/500cc Models Correct fitment on pre-unit 650cc swinging arm models from 1954-60....
+

spring700H-E2
£3.95 (£4.74 inc VAT)
OEM: 82-2610, F2610
Prop / Side Stand Spring Triumph T100, T120 Early Unit Models Length inside hooks: 5+5/8" (143mm) OEM: 82-2610, F2610
+

fkswing050-C3
£3.95 (£4.74 inc VAT)
OEM: 83-2521, F12521
SWINGING ARM PIN BUSH - BSA / Triumph Swinging arm pin bush for BSA A65 Oil In Frame OIF (1971-72) and Triumph TR6, T120 (1971-74), TR7, T140...
+

seatfix218-C2
£3.95 (£4.74 inc VAT)
OEM: 60-0374
Check Wire - Triumph Triumph Dual Seat Check Wire, as fitted to all Triumph twins. (Pre Oil in frame) (1959-74) OEM: 60-0374, D374
+

stud4682-B14
£3.95 (£4.74 inc VAT)
OEM: 82-4682, F14682
Frame Engine Stud - Triumph - 82-4682 Used on the Triumph engine to Frame. OEM: 82-4682, F14682
+

stay907-C2
£3.95 (£4.74 inc VAT)
OEM: 97-4022
Triumph/BSA Front Mudguard Bracket - 97-4022 Fixing Bracket for wire stay type front mudguards (1971-72). As fitted to Triumph TR6 and T120 Oil in Frame,...
+

mat8091-E4
£3.95 (£4.74 inc VAT)
OEM: 68-4597, 82-9003, 82-8091, F9003, F8091, 49510
Battery Tray/Carrier Rubber Mat - Triumph, BSA, Royal Enfield + Universal Use Correct fitment for many Triumph & BSA models, also used on the Royal...
+

stay5994-C2
£3.95 (£4.74 inc VAT)
OEM: 82-5994, F5994 82-4690, F4690
Triumph Rear Mudguard Bridge Clip - 500/650cc Models - Circa 1960-70 Triumph rear mudguard bracket as used on both pre-unit and unit models. Powder...
+

clip115-C4
£3.95 (£4.74 inc VAT)
D-Ring DZUS Fastener - Universal Quick Release Fairing or Panel Clip Allows for quick removal and replacement of fairings and body panels. Spring...
+

spring4671-E2
£3.95 (£4.74 inc VAT)
OEM: 82-4671, F4671
Triumph Centre Stand Spring - Pre Unit and Unit 650cc Models + T150/160 Models Correct fitment on pre-unit and unit 650cc models from 1960-70. Also fits...
+

strap2952-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 6+5/16" (160mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

strap2951-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 6+5/16" (160mm) Long - Closed Loop + Open Bar Strong rubber band with integral closed metal brackets at one end and...
+

strap2950-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 5+9/16" (141mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

swing4087-C3
£3.95 (£4.74 inc VAT)
OEM: 40-4249, 42-4216, 90-3218, 82-4087, F4087
Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models With threaded centre for grease nipple. Correct fitment on the following bikes: BSA...
+

tenpart3556-C3
£3.95 (£4.74 inc VAT)
OEM: 83-3556, F3556
Triumph/BSA Chain Adjuster Snail Cam - B25, B50 and TR25W and TR5T Models Swinging arm pivot/rear chain tensioner plate as fitted to OIF models from 1971...
+

knob1357-C4
£3.95 (£4.74 inc VAT)
OEM: 83-1357, F11357, 82-8044, F8044
Triumph Side Panel / Toolbox Knob - Unit 350/500/650cc Twins From 1968 Onwards Side cover securing screw as fitted to T120 and TR6 models from 1968-70 +...
+

tank8058-E9
£3.95 (£4.74 inc VAT)
OEM: 42-8058
BSA Fuel Tank Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-59 Locates below the petrol tank - c orrect fitment on swinging arm B31,...
+

nut7389-C4
£3.95 (£4.74 inc VAT)
OEM: 82-7389, F7389
Triumph Engine Plate To Frame Nut - 650 Twins + 750cc Triples - 1967 Onwards - UNF Thread Rear engine plate to frame shouldered nut as used on T120, TR6...
+

stud4077-C4
£3.95 (£4.74 inc VAT)
OEM: 40-4855, 82-9047, F9047
Engine to Frame Stud - Triumph/BSA Unit Singles - C15, B25, C25, B40, B44, TR25W Lower rear mounting engine to frame stud as used on the models listed...
+

spring489-E2
£4.45 (£5.34 inc VAT)
OEM: 66-4767

+

trim092-C4
£4.45 (£5.34 inc VAT)
OEM: 67-6851
Rear Number Plate Trim - BSA - 67-6851 BSA Rear Rubber Number Plate Trim for most models. Approx 2ft/60cm OEM: 67-6851
+

bracket958H-E4
£4.45 (£5.34 inc VAT)
OEM: 82-8032, F8032
Triumph Battery Strap Anchorage Bracket - 350/500/650cc Models Circa 1968-71 Correct fitment on T90, T100, T120 and TR6 models circa 1968-71. Correct...
+

stay522H-C2
£4.45 (£5.34 inc VAT)
OEM: 97-1685
Triumph Front Mudguard Bracket - 97-1685 Triumph Front Mudguard Bracket. Powder Coated gloss black. OEM: 97-1685
+

knob9445-C4
£4.45 (£5.34 inc VAT)
OEM: 82-9445, F9445
Triumph Trident Side Panel Cover Release Knob - T150, T160 Models Side panel securing knob for all Triumph Trident models. Attaches on the left hand side...
+

bolt3097-E2
£4.45 (£5.34 inc VAT)
OEM: 82-3097, F3097, 40-4733
Triumph/BSA Side Stand Swivel Pin / Pivot Bolt - Pre Unit and Unit Models Circa 1950-70 Correct fitment to mount the prop stand on models with a threaded...
+

nut5839-C4
£4.45 (£5.34 inc VAT)
OEM: 29-5839, 82-9050, 40-4810
Footrest Nut - Left Hand Thread - A50 and A65 Models Circa 1962-70 + Triumph/BSA Unit Singles Footrest mounting nut with LH thread as used on BSA A50, A65...
+

cab3682-E12
£4.45 (£5.34 inc VAT)
OEM: 97-3682, H3682
Triumph/BSA Front Brake Cable Guide Bracket - Unit Singles and Twins + T150 Models Circa 1968-73 Locates over the timing side fork leg pinch bolt -...
+

seal2244-C3
£4.45 (£5.34 inc VAT)
OEM: 83-2244, F2244
Triumph/BSA Swinging Arm Pivot Oil Seal - B25, B50 and TR25W and TR5T Models Two required per bike - OIF models from 1971 onwards. OD: 3" (31.9mm) ID:...
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

decal3748-T7
£4.45 (£5.34 inc VAT)
OEM: 60-3748, D3748
Triumph 5 Speed Rear Mudguard Decal - T140, TR7, T150, T160 Models - Circa 1973-87 Self adhesive vinyl sticker generally positioned on the rear mudguard...
+

oddie045-C4
£4.45 (£5.34 inc VAT)
OEM: 68-9287, 60-1006, D1006
BSA/Triumph Side Panel Oddie Stud - Long Type - A50, A65, Bantam D10, D14 and Unit Singles As used on various BSA models including A50, A65, B25, C25,...
+

oddie046-C4
£4.45 (£5.34 inc VAT)
OEM: 68-9223, 60-0982, 60-3159, D982, D3159
BSA/Triumph Side Panel Oddie Stud - Short Type - A50, A65, Bantam D10 and Unit Singles As used on various BSA models including A50, A65, B25, C25, B44,...
+

screw3875-C4
£4.45 (£5.34 inc VAT)
OEM: 82-3875, F3875
Triumph Toolbox/Battery Case Lid Fastener Screw - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid fastening bolt - correct...
+

stand-bolt4793-E2
£4.45 (£5.34 inc VAT)
OEM: 42-4793
BSA Prop Stand Pivot Bolt - A50 / A65 + A and B Group Swinging Arm Models - 1954 Onwards Part threaded prop stand bolt with thin head. Correct fitment on...
+

bolt3619-E2
£4.50 (£5.40 inc VAT)
OEM: 82-3619, F3619
Centre Stand Bolt - Triumph Pre-Unit 350/500/650cc - From 1954-62 Centre stand securing bolt, with flat section for the locking washer. To fit T21, 3TA,...
+

trans276-T7
£4.75 (£5.70 inc VAT)
BSA Piled Arms (Cycles) - Transfer
+

trans324-T7
£4.75 (£5.70 inc VAT)
BSA Piled Arms (MotorCycles) - Transfer
+

spring144-E2
£4.95 (£5.94 inc VAT)
OEM: 90-4733
Centre Stand Spring BSA Bantam D7, D10, D14 Length inside hooks: 4+7/8" (123mm) OEM: 90-4733
+

bear436-F4
£4.95 (£5.94 inc VAT)
OEM: 06-7604
Norton Featherbed Taper Roller Bearing steering conversion for Norton featherbed models (Sold Singularly) OEM: 06-7604 APPROX Measurement: ID-25mm, OD-52mm
+

stand-bolt515-E2
£4.95 (£5.94 inc VAT)
OEM: 82-7021, F7021, 14-1303, 14-0703
Triumph Side Stand Pivot Bolt + Lock Nut - 500/650/750cc Twins and Triples From 1967 Onward Prop stand swivel pin and thin self locking Cleveloc nut....
+

rub191-A4
£4.95 (£5.94 inc VAT)
OEM: 97-2208
Triumph rubber headlamp ear buffer For headlamp bracket mount OEM: 97-2208
+

fknum60
£4.95 (£5.94 inc VAT)
Front Number Plate Blade - in raw metal ready for painting To suit classic motorcycles 27cm long
+

stud3592-C4
£4.95 (£5.94 inc VAT)
OEM: 82-3592, F13592
Frame Stud - Footrest T110 - 82-3592 Used on the Triumph T110 and other models to secure footrest. OEM: 82-3592, F3592
+

nut4343-C3
£4.95 (£5.94 inc VAT)
OEM: 42-4343
Swinging Arm Spindle Nut - BSA - 42-4343 BSA A&B Group Hollow spindle for cross over brake models. Fits A50/A65 pre 1969 models Fits BSA A10, BSA...
+

num2727-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2727
Triumph Rear Number Plate Bracket - Left Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2727
+

num2728-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2728
Triumph Rear Number Plate Bracket - Right Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2728
+

trans4148-T7
£4.95 (£5.94 inc VAT)
OEM: 60-4148
Triumph T140 Bonneville Side Cover Decal - Vermilion and Silver Vermilion (red) background with silver embossed raised lettering Peel off and fix type...
+

spring145-E2
£4.95 (£5.94 inc VAT)
OEM: 42-4730
BSA Centre Stand Spring - BSA A and B Swinging Arm Models from 1954-62 Suitable for swinging arm models - BSA Goldstar, B31, B32, B33, B34 from 1954-63 +...

shim3683-C3
£4.95 (£5.94 inc VAT)
OEM: 82-3683, 82-3684, F3683, F3684
Triumph Swinging Arm Spindle Shim Set - All Pre-Unit Models To fit 5T, 6T, TR5, T100, T110 and T120 pre unit models with swinging arm. Set of 4 shims:...
+

strap2955-E4
£4.95 (£5.94 inc VAT)
Universal Rubber Battery Strap - 10+7/8" (276mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

bear2245-C3
£4.95 (£5.94 inc VAT)
OEM: 83-2245, F2245
Triumph/BSA Swinging Arm Bearing - B25, B50 and TR25W and TR5T Models Needle roller swinging arm bearing - two required per bike. OD: 1+1/4" (31.8mm)...
+

wash8330-C4
£4.95 (£5.94 inc VAT)
OEM: 42-8330
BSA Oil Tank Front Mounting Cupped Washer - A and B Group Swinging Arm Models Circa 1954-62 Oil tank front fixing bolt bracket cup - correct fitment on...
+

wash8329-C4
£4.95 (£5.94 inc VAT)
OEM: 42-8329
BSA Oil Tank Front Fixing Bolt Saddle Washer - A and B Group Swinging Arm Models Circa 1954-62 Locates over the top front oil tank fixing bolt on B31,...
+

swing7848-C3
£4.95 (£5.94 inc VAT)
OEM: 82-7848, F7848
Triumph/BSA Swinging Arm Flanged Washer / O Ring Housing - 650cc Twins + Trident Models Circa 1968-75 Swinging arm pivot oil seal housing - locates on...
+

seatrub315-set-C2
£4.95 (£5.94 inc VAT)
OEM: 82-4898, 82-7835, F4898, F7835
Triumph Seat Rubber Buffer Set - Unit 500/650cc + T150/T160 Models From 1968 Onwards Set of four rubber seat mounting buffers - 2x front (D shape) and 2x...
+

wash2216-A4
£4.95 (£5.94 inc VAT)
OEM: 83-2210, 83-2216, F12210, F12216, 54525403
BSA / Triumph Wire Stay Bracket To Headlamp Clamping Washer - Various OIF Models Circa 1971-73 Tabbed headlamp clamp washer to secure the headlamp shell...
+

stay2796-C2
£4.95 (£5.94 inc VAT)
OEM: 83-2796, F12796
Triumph Rear Mudguard Lower Front Bracket - 750cc Twins Circa 1976-85 Rear mudguard lower front bracket - secures the front of the mudguard to the frame....
+

brake2006-C18
£4.95 (£5.94 inc VAT)
OEM: 37-2006, W2006, 68-7061
Triumph Front Brake Cable Spring Fix Pivot Pin - 500/650cc + T150 TLS Models Circa 1968-69 Spring fix clevis pin used to attach the front brake cable...
+

off-pegbk00-pair
£5.00 (£6.00 inc VAT)
Universal Footrest Mounting Lugs - Weld On Type Pair of mounting brackets ideal for use with our Sammy Miller footrests or Talon foot pegs. Suitable for...
+

decal4622-T7
£5.75 (£6.90 inc VAT)
OEM: 60-4622, D4622, 60-4502, D4502
Triumph Console / Instrument Panel Decal - T140 and T160 Models - Circa 1975-85 Self adhesive vinyl transfer that fits over the ignition panel assembly on...
+

spring909-E2
£5.95 (£7.14 inc VAT)
OEM: 06-2592
Norton Commando 750cc, 850cc prop stand spring (1971-76). (Side Stand Spring) Length inside hooks: 7" (175mm) OEM: 06-2592
+

trans7054-T7
£5.95 (£7.14 inc VAT)
OEM: 60-7054
Triumph T140 Bonneville Side Cover Decal - Silver and Black Silver background with black embossed raised lettering Peel off and fix type Sold each OEM:...
+

cab2270A-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H2270
Triumph/BSA Enclosed Front Cable Holder / Retainer - OIF Models Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

cab2270-E12
£5.95 (£7.14 inc VAT)
OEM: 97-2270, H2270, 97-4479, H4479
Triumph Enclosed Front Cable Holder / Retainer - OIF Models - White Attaches to your front mudguard, the grommet type fitting clips into a hole in the...
+

buck9355-E4
£5.95 (£7.14 inc VAT)
OEM: 82-9355, F9355
Triumph Battery Strap Anchorage Buckle - Later T140 and TR7 Models + T150 and T160 Models Correct fitment on later T140 and TR7 models from 1978 onwards...
+

stay3599-C2
£5.95 (£7.14 inc VAT)
OEM: 82-3599, F3599
Triumph Rear Mudguard Mounting Bracket - Pre Unit and Early T90/T100 Models Circa 1954-64 Rear engine plates to mudguard bracket. Correct fitment s ingle...
+

brkt2282
£5.95 (£7.14 inc VAT)
OEM: 71-2282, E12282
Triumph Silencer / Pillion Footrest Mounting Bracket - OIF 650cc Models Circa 1971-72 Exhaust silencer hanger bracket / rear footrest mounts as fitted...
+

peg872-C4
£6.45 (£7.74 inc VAT)
OEM: 06-2734
Norton Commando Riders Footpeg 1967-74 Footrest length 6" Diameter 9/16" Footrest end to frame flush point 3+1/2" Supplied in Pairs OEM 06-2734
+

fkref102-A7
£6.45 (£7.74 inc VAT)
OEM: RER25, LU57124
Reflector - UNIVERSAL Pattern Lucas Red Reflector with chrome bezel for Rear number plate Diameter : Approx 2" OEM: RER25, LU57124
+

swing4076-C3
£6.45 (£7.74 inc VAT)
OEM: 40-4209, 82-4076, F4076
Triumph/BSA Swinging Arm Bush - Bantam, Tiger Cub and Unit 350/500cc Models Correct fitment on the following bikes: BSA Bantam D7, D10, D14 models + C15,...
+

swing3690-C3
£6.45 (£7.74 inc VAT)
OEM: 82-3690, F3690
Swinging Arm Bush - Triumph - 500/650cc Pre-Unit Models Swing arm pivot bush to fit pre unit  5T, 6T, TR5, T100, T110, T120, TR6 models. Length: 1"...
+

plate4818-C4
£6.45 (£7.74 inc VAT)
OEM: 40-4818, 82-9048, F9048
BSA Footrest Splined Locking Plate - A50 and A65 Models Circa 1962-69 + Triumph/BSA Unit Singles Footrest stud locking plate as used on BSA A50, A65 and...
+

b/rod-83-2616
£6.45 (£7.74 inc VAT)
OEM: 83-2616, F12616
1 8" BSA/Triumph Brake Rod - OIF Unit Singles - B25, B50, TR5T, TR25W Models From 1971 Onwards Rear brake rod - correct fitment on BSA and Triumph oil in...
+

hook9004-E4
£6.45 (£7.74 inc VAT)
OEM: 82-9004, F9004 04-7431, 83-5485, F15485, 04-2608
Triumph/BSA - Battery Strap Hook - T160, A50, A65 + Unit Singles Circa 1967 Onwards + Universal Use Four slot battery strap buckle with hook - correct...
+

pin40-4714-E2
£6.45 (£7.74 inc VAT)
OEM: 40-4714
BSA Centre Stand Pivot Pin - C15 and B40 Models - Circa 1961-65 Correct fitment on C15, SS80 and B40 models with an anchor plate and spring lug on the...
+

bear240-F4
£6.95 (£8.34 inc VAT)
OEM: 00-0805
AJS, Matchless Steering Head Bearing - Fork Crown Bearing Track for AJS and Matchless Single cylinder and Twin cylinder Motorcycles (Sold Singularly)...
+

bear242-F4
£6.95 (£8.34 inc VAT)
OEM: 01-2620
AJS, Matchless Steering Head Bearing - Fork Top Yoke Bearing Track for AJS and Matchless Single cylinder and Twin cylinder Motorcycles (Sold Singularly)...
+

bear317-F4
£6.95 (£8.34 inc VAT)
OEM: 97-4031, H4031
BSA and Triumph Steering Head Bearing To fit BSA B25/B50 1971 model with Taper roller bearings, A75 Rocket 3 1971 onwards with taper roller bearings. To...
+

stand-bolt4732-E2
£6.95 (£8.34 inc VAT)
OEM: 90-4732
BSA Centre Stand Pivot Bolt - Bantam D7, D10, D14 + T20 Super Cub Models - Circa 1960 Onwards Part threaded centre stand stepped pivot pin with thin...
+

lyc005-C2
£6.95 (£8.34 inc VAT)
Lycett 'Made in England' Badge for seats and saddles. As used on Norton, Triumph, BSA, AJS, Matchless, Ariel, Velocette, Vincent and Royal Enfield models.
+

swing-bush049-C3
£6.95 (£8.34 inc VAT)
OEM: 06-0447, 06.0447
Norton Commando Swinging Arm Bearing / Bush - 750/850cc MK1 and MK2 Models - Circa 1969-74 Oilite flanged swinging arm pivot bush - correct fitment on pre...
+

fkswing411-C4
£6.95 (£8.34 inc VAT)
OEM: 82-8475
BSA / Triumph Swinging Arm Bush - A75 Rocket 3 + X75 Hurricane Models Correct fitment on  BSA A75 Rocket 3 MK1 and MK2 models circa 1969-72 + Triumph X75...
+

spring857-E2
£6.95 (£8.34 inc VAT)
OEM: 06-0768
Norton Commando Prop Stand spring , as fitted to 750cc Commandos (1968-70). (Side Stand Spring) OEM: 06-0768 Made in England.
+

b/rod-82-7386
£10.95 (£13.14 inc VAT)
OEM: 82-7386, F7386
Brake Rod - Triumph Earlier Models - 82-7386 Connects foot pedal to rear brake arm. Suit earlier model 500/650/750cc engine models etc. OEM: 82-7386, F7386

stand4744-E2
£6.95 (£8.34 inc VAT)
OEM: 42-4744
BSA Centre Stand Pivot Bar/Pin - BSA A and B Swinging Arm Models from 1958-62 Suitable for swinging arm models - BSA Goldstar, B31, B32, B33, B34 from...
+

brake0593-C18
£6.95 (£8.34 inc VAT)
OEM: 37-0593, W593, 60-0638, D638
Triumph Front Brake Cable End Clevis - Fork End Overall length: 1+3/8" (35.3mm) OEM: 37-0593, W593,  60-0638, D638
+

shim4385-C3
£6.95 (£8.34 inc VAT)
OEM: 40-4217, 82-4385, 82-4386, F4385, F4386
Triumph/BSA Swinging Arm Spindle Shim Set - Bantam Models + C15, B40, T20 & Unit 350/500 D7, D10, D14, B175, C15, B40 + Triumph T20 and Unit...
+

seatfix2087-C2
£6.95 (£8.34 inc VAT)
OEM: 60-2087, D2087
Triumph Dual Seat Check Wire - 650/750cc OIF Models - 1971 Onwards Correct fitment on OIF T120, T140, T150, T160 models with dual hinged seat. Plastic...
+

tank4078-E9
£6.95 (£8.34 inc VAT)
OEM: 42-4078
BSA Fuel Tank Fixing Socket Bolt - A and B Group Swinging Arm and Rigid Models Circa 1954-62 Screws into the top section of the frame under the petrol...
+

buck3849-E4
£6.95 (£8.34 inc VAT)
OEM: 83-3849, F13849
Triumph Battery Strap Anchorage Buckle - OIF T120 and TR6 + T140 and TR7 Models Circa 1971-77 Correct fitment on OIF T120 and TR6 models + earlier T140...
+

bolt4685-C2
£6.95 (£8.34 inc VAT)
OEM: 82-4685, F4685
Triumph Seat Lug Bolt - Pre Unit T120 and TR6 Models Circa 1960-62 Locates horizontally between the front and rear frame. Correct fitment on T120 and TR6...
+

num4784-C4
£6.95 (£8.34 inc VAT)
OEM: 83-4784, F14784
Triumph Rear Number Plate Top Bracket - 750cc Twins and Triples + TR5T Models - 1973 Onwards Top rear number plate bracket - correct fitment on T140,...
+

nut453-C3
£7.45 (£8.94 inc VAT)
OEM: 97-2702
BSA A50 / A65 Fork steering stem Top Nut (1969-70) Chrome plated OEM: 97-2702
+

nut450b-C3
£7.45 (£8.94 inc VAT)
OEM: 40-5018, 90-5257
BSA Steering Stem Nut - Bantam D7, D10, D14 + C15, B25, B40 Models Fits BSA Bantam D7/D10 (1958-67), D14 (1968-71), C15 (1959-67), B25 (1967-70), B40...
+

nut450t-C3
£7.45 (£8.94 inc VAT)
OEM: 97-2651, H2651
Triumph TR25W Steering Stem Nut - 97-2651 Correct fitment on TR25W models circa 1967-70. Chrome plated. OEM: 97-2651, H2651
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.