.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

swing7270-C3
£2.45 (£2.94 inc VAT)
OEM: 82-7270, F7270
Triumph Swinging Arm Spindle Rubber Gaiter - Later Unit 350/500cc Models Circa 1967-74 Correct fitment on later T90 and T100 models from 1967 onwards....
+

hook9004-E4
£6.45 (£7.74 inc VAT)
OEM: 82-9004, F9004 04-7431, 83-5485, F15485, 04-2608
Triumph/BSA - Battery Strap Hook - T160, A50, A65 + Unit Singles Circa 1967 Onwards + Universal Use Four slot battery strap buckle with hook - correct...
+

off-mud019-UU
£49.95 (£59.94 inc VAT)
Universal Short Front Mudguard - Unpolished Alloy - 18/19" Wheel Universal plain undrilled, C shaped profile to fit 18/19" front wheel. Unpolished...
+

fkmud32
£57.95 (£69.54 inc VAT)
Front Mudguard - 4" Width - Polished Stainless Steel - 19" Wheel - C Section Universal plain undrilled, C shaped profile to fit 19" front wheel. Both...
+

fkmud009
£57.95 (£69.54 inc VAT)
C Shaped 5" Rear Mudguard - Alloy - 18/19" Wheel - Universal Blade Universal plain undrilled, C shaped profile to fit 18/19" rear wheel. Both sides and...
+

spring3617-E2
£3.95 (£4.74 inc VAT)
OEM: 82-3617, F3617
Triumph Centre Stand Spring - Pre Unit 650cc Models Circa 1954-60 + 350/500cc Models Correct fitment on pre-unit 650cc swinging arm models from 1954-60....
+

rubb197-C12
£2.95 (£3.54 inc VAT)
OEM: 68-8315
BSA Motorcycle A65, A50, B40WD models. Oil tank mounting rubber. OEM: 68-8315
+

wash2288
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+

wash3302
£0.25 (£0.30 inc VAT)
OEM: 70-3302, E3302, 75-0214, 75-214, S21/91
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...
+

screw3875-C4
£4.45 (£5.34 inc VAT)
OEM: 82-3875, F3875
Triumph Toolbox/Battery Case Lid Fastener Screw - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid fastening bolt - correct...
+

nut2062-A4
£2.95 (£3.54 inc VAT)
OEM: 21-2062, S2062
BSA / Triumph Headlamp Bracket Wire Stay Lower Sleeve Nut - Various OIF Models Circa 1971-73 Domed sleeve nut to secure the lower section of the left and...
+

r/bush2209-A4
£0.95 (£1.14 inc VAT)
OEM: 83-2209, F12209
BSA / Triumph Headlamp Bracket Wire Stay Top Fixing Rubber Bush - OIF Models Circa 1971-73 Headlamp wire bracket top fixing rubber bush, locates either...
+

rub9054
£8.95 (£10.74 inc VAT)
OEM: 82-9054, F9054
Triumph Branded Rear Pillion Short Footrest Rubbers - Pair Pillion footrest pedal rubbers branded with the Triumph logo - round rubber with square hole,...
+

trim092-C4
£4.45 (£5.34 inc VAT)
OEM: 67-6851
Rear Number Plate Trim - BSA - 67-6851 BSA Rear Rubber Number Plate Trim for most models. Approx 2ft/60cm OEM: 67-6851
+

grom5536-C7
£2.25 (£2.70 inc VAT)
OEM: 82-5536
Triumph Chainguard Rubber Grommet - Fits all 650cc Unit Models - 1963-70 Suitable for 650cc - Bonneville, T120, Tiger, TR6, Trophy, TR6C, T120TT &...
+

cab5090-E12
£1.45 (£1.74 inc VAT)
OEM: 40-5090, 97-2654, H2654
BSA/Triumph Wire Cable Guide - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates on the back of the lower fork pinch bolt to retain the...
+

knob4310-C4
£9.95 (£11.94 inc VAT)
OEM: 89-4310
BSA/Triumph Toolbox Cover Nut - Bantam D7, D10, D14, C15, SS80, B40 and Super Cub Models Tool box cover thumb nut / side panel screw - 2 generally...
+

nut-ns362-C2
£1.25 (£1.50 inc VAT)
OEM: NS362
Triumph Front Mudguard Bottom Stand / Stay Spigot Nut - Pre Unit and Unit Models Circa 1946-68 Domed spigot nut used to secure the bottom stay to the...
+

seatfix458-C2
£13.95 (£16.74 inc VAT)
OEM: 82-7560
Seat Latch Knob - Triumph Triumph seat latch side knob assembly with spring. Steel with bright zinc finish. Supplied with knob,spring,washer and split...
+

spring-kit955-E2
£12.95 (£15.54 inc VAT)
Triumph Unit Twins & Triples Centre Stand Fixing Kit - 650/750cc from 1967 Onwards Kit comprises of 9 pieces: 2x pivot bolts - 21-1978 2x lock...
+

cab9325-E12
£2.25 (£2.70 inc VAT)
OEM: 76-9325, 97-2659, H2659
BSA/Triumph Cable Guide Grommet - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates within the bracket that attaches to the top...
+

tank8058-E9
£3.95 (£4.74 inc VAT)
OEM: 42-8058
BSA Fuel Tank Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-59 Locates below the petrol tank - c orrect fitment on swinging arm B31,...
+

grease0095-C4
£1.95 (£2.34 inc VAT)
OEM: 64-0095, 64-95
BSA/Triumph 2BA Grease Nipple - T20 Tiger Cub, C15 and Bantam D7, D10, D14 and B175 Models Standard straight swinging arm grease nipple - correct fitment...
+

tube8331-C4
£2.95 (£3.54 inc VAT)
OEM: 42-8331
BSA Oil Tank Front Mounting Spacing Tube - A and B Group Swinging Arm Models Circa 1954-62 Oil tank front fixing bolt spacer - correct fitment on B31,...
+

grom5466-A15
£0.95 (£1.14 inc VAT)
OEM: 82-5466, F5466
Triumph Coil Mounting Rubber Grommet - Unit 350/500/650cc Twins Circa 1963-69 Rubber grommet - locates between the two spacers over the the coil mounting...
+

fknum49
£29.95 (£35.94 inc VAT)
OEM: 82-3633, F3633
Triumph - Rear Number Plate - Late Pre Unit, and Some Unit models Single bolt fixing at the top - two bolts at the bottom. Takes 564 type rear lamp....
+

screw133551-pair-A4
£1.95 (£2.34 inc VAT)
OEM: 133551
Rear Lamp Lens Mounting Screws - LU564, 573839 Pair of screws for Lucas L564, LU564, 573839 tail light lens. Length UH: 1+11/16" (43mm). Price is for...
+

mud028
£39.95 (£47.94 inc VAT)
C Shaped 5" Rear Mudguard - Raw Steel - 18/19" Wheel - Universal Blade Universal plain undrilled, C shaped profile to fit 18/19" rear wheel. Both sides...
+

swing4087-C3
£3.95 (£4.74 inc VAT)
OEM: 40-4249, 42-4216, 90-3218, 82-4087, F4087
Triumph/BSA Swinging Arm Bolt - Bantam, C15, B40 + Tiger Cub Models With threaded centre for grease nipple. Correct fitment on the following bikes: BSA...
+

rub1377-C4
£0.95 (£1.14 inc VAT)
OEM: 83-1377, F11377
Triumph Side Panel / Toolbox Knob Rubber Washer - Unit 350/500/650cc Twins From 1968 Onwards Rubber grommet - locates between the screw-in side panel knob...
+

rub191-A4
£4.95 (£5.94 inc VAT)
OEM: 97-2208
Triumph rubber headlamp ear buffer For headlamp bracket mount OEM: 97-2208
+

rubb779-A4
£1.25 (£1.50 inc VAT)
OEM: 97-2209, 70-7554, 71-2209
Triumph Headlight Mounting Grommet Various models from 1973 onwards. OEM: 97-2209, 70-7554, 71-2209
+

dowel5943-C4
£0.95 (£1.14 inc VAT)
OEM: NT316, 82-5943, F5943, 99-3543
Triumph Footrest Dowel - Pre Unit and Unit Models From 1954-88 Peg to secure the front footrests on all swinging-arm pre-unit models from 1954-1962 + Unit...
+

bear9912-F4
£33.95 (£40.74 inc VAT)
OEM: 99-9912, 66-4149, 65-5126, 65-5127
BSA A, B & M Group Steering Head Cup + Cone Bearing Set - 1937-70 To fit BSA A50, A65 models from 1962-70 + all A7, A10 models and all M & B...
+

bear-taper14A-F4
£54.95 (£65.94 inc VAT)
BSA Steering Head Bearings Taper Rollers - A Group + B31, B33 & M21 Models to 1970 Steering head taper roller bearing kit includes the upper and...
+

stay6915-C2
£16.95 (£20.34 inc VAT)
OEM: 82-6915, F6915
Triumph Rear Mudguard Bridge - Unit 350/500/650/750cc Models Circa 1966-75 Rear mudguard mounting bracket - locates between shock absorbers. Correct...
+

wash2266-C3
£0.95 (£1.14 inc VAT)
OEM: 83-2266, F12266
Triumph Rear Wheel Spindle / Swinging Arm Pivot Washer - OIF 650/750cc Twins Circa 1971-85 Flat washer for use on both the rear wheel spindle and...
+

reflect-stick-A7
£0.95 (£1.14 inc VAT)
Rear Number Plate Reflector Stick-on type Simply peel off the backing and stick on the number plate
+

screw0688-B4
£0.75 (£0.90 inc VAT)
OEM: 97-0688, H688
Triumph Slotted Nacelle Motif / Gear Pointer Screw - 5BA x 1/4" Full thread 1/4" UH (6.7mm) OEM: 97-0688, H688
+

brake2005-C18
£8.45 (£10.14 inc VAT)
OEM: 37-2005, W2005
Triumph/BSA Brake Rod Linkage - Front - Twin Leading Shoe Brakes Threaded brake rod linkage / clevis end for full width 8" front twin leading shoe (TLS)...
+

swing0118-C4
£29.95 (£35.94 inc VAT)
OEM: 83-2691, F12691, 83-2692, F12692, 83-2521, F12521
Triumph/BSA Swinging Arm Spindle Set - Unit OIF 650/750cc Twins Circa 1971-87 Complete swinging arm spindle set including bobbins, split bushes and...
+

sleeve3227-C4
£1.95 (£2.34 inc VAT)
OEM: 82-3227, F3227
Triumph Toolbox/Battery Case Lid Aluminium Grommet - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid centre sleeve - correct...
+

nut0594-B18
£2.45 (£2.94 inc VAT)
OEM: 21-0594, S594, 21-0545, S545
Triumph Gearbox Mainshaft Nut/Swing Arm Pin Nut - 21-0594, 21-0545 Triumph gearbox mainshaft nut - OR - Swing arm pin nut Suits some Triumph 500/650cc and...
+

wash2007H-C4
£2.45 (£2.94 inc VAT)
OEM: 83-2007, F12007
Triumph/BSA Steering Head Bearing Abutment Ring - OIF Models 1971 Onwards Located above the lower head bearing and below the upper bearing. Correct for...
+

stay6759
£8.95 (£10.74 inc VAT)
OEM: 42-6759, 42-6785
BSA Rear Mudguard Fixing Clip - A and B Group Swinging Arm Models Circa 1954-63 Rear mudguard mounting bracket as used on B31, B33,  DB32/DBD34 Goldstar,...
+

peg7510-C4
£2.45 (£2.94 inc VAT)
OEM: 82-7510, F7510
Triumph Oil Tank Mounting Screwed Peg - 500/650/750cc Unit Models Circa 1968-74 - UNF Thread As used on T100, TR6, T120, T150 and T160 models from 1969...
+

bolt0424-C2
£2.95 (£3.54 inc VAT)
OEM: 97-0424, H424
Triumph Front Mudguard Bottom Stay Pivot Bolt - Pre Unit and Unit 500/650cc Models Circa 1946-66 Stepped front stand to fork pivot screw as used on: Pre...
+

nut1304-E2
£1.45 (£1.74 inc VAT)
OEM: 14-1304
Centre Stand Bolt Nut - Triumph/BSA - 14-1304 Nut for Centre stand securing bolt. Suit late model Triumph and BSA oil in frame models OEM: 14-1304
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.