.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Other Frame Parts

stud0548-C4
£2.45 (£2.94 inc VAT)
OEM: 21-0548, S548
Triumph Pivot Lug To Engine Plate Stud - 650 Twins + 750cc Triples - 1967 Onwards - UNF Thread Rear engine plate to frame stud as used on T120, TR6 and...
+

sleeve3227-C4
£1.95 (£2.34 inc VAT)
OEM: 82-3227, F3227
Triumph Toolbox/Battery Case Lid Aluminium Grommet - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid centre sleeve - correct...
+

screw3875-C4
£4.45 (£5.34 inc VAT)
OEM: 82-3875, F3875
Triumph Toolbox/Battery Case Lid Fastener Screw - Pre Unit 500/650cc Models Circa 1955-62 Tool box / battery box casing lid fastening bolt - correct...
+

bolt4685-C2
£6.95 (£8.34 inc VAT)
OEM: 82-4685, F4685
Triumph Seat Lug Bolt - Pre Unit T120 and TR6 Models Circa 1960-62 Locates horizontally between the front and rear frame. Correct fitment on T120 and TR6...
+

clip3808-C4
£2.95 (£3.54 inc VAT)
OEM: 82-3808, F3808
Triumph Extended Skirt Chainguard Clip - Pre Unit TR5 and TR6 + Unit 650cc Models Circa 1964-69 Chain guard clip to position and secure the deep fin to...
+

wash9227-C4
£1.45 (£1.74 inc VAT)
OEM: 68-9227, 60-0985, D985
BSA/Triumph Side Panel Oddie Stud Rubber Washer - Side Panel Fitting - Various Models Used in conjunction with either the long or short side panel...
+

knob3474-C4
£10.95 (£13.14 inc VAT)
OEM: 82-3472, F3472
Triumph Toolbox Cover Knob - T15 and T20 Tiger Cub Models Circa 1953-68 Tool box casing lid thumb knob with internal thread as used on various Tiger Cub...
+

oddie046-C4
£4.45 (£5.34 inc VAT)
OEM: 68-9223, 60-0982, 60-3159, D982, D3159
BSA/Triumph Side Panel Oddie Stud - Short Type - A50, A65, Bantam D10 and Unit Singles As used on various BSA models including A50, A65, B25, C25, B44,...
+

oddie045-C4
£4.45 (£5.34 inc VAT)
OEM: 68-9287, 60-1006, D1006
BSA/Triumph Side Panel Oddie Stud - Long Type - A50, A65, Bantam D10, D14 and Unit Singles As used on various BSA models including A50, A65, B25, C25,...
+

wash1967
£0.35 (£0.42 inc VAT)
OEM: 02-1967, 60-4251, PCW73A
Triumph/BSA - 7/16" Spring Washer - Various Uses On Pre Unit and Unit Models As used extensively on many BSA + pre unit and unit Triumph models +...
+

wash8329-C4
£4.95 (£5.94 inc VAT)
OEM: 42-8329
BSA Oil Tank Front Fixing Bolt Saddle Washer - A and B Group Swinging Arm Models Circa 1954-62 Locates over the top front oil tank fixing bolt on B31,...
+

wash8330-C4
£4.95 (£5.94 inc VAT)
OEM: 42-8330
BSA Oil Tank Front Mounting Cupped Washer - A and B Group Swinging Arm Models Circa 1954-62 Oil tank front fixing bolt bracket cup - correct fitment on...
+

bolt8385-C4
£15.95 (£19.14 inc VAT)
OEM: 42-8385
BSA Oil Tank Front Fixing Bolt - A and B Group Swinging Arm Models Circa 1954-62 Locates and secures the top front of the oil tank on B31, B32, B33, B34,...
+

b/rod-83-2616
£6.45 (£7.74 inc VAT)
OEM: 83-2616, F12616
1 8" BSA/Triumph Brake Rod - OIF Unit Singles - B25, B50, TR5T, TR25W Models From 1971 Onwards Rear brake rod - correct fitment on BSA and Triumph oil in...
+

grease0095-C4
£1.95 (£2.34 inc VAT)
OEM: 64-0095, 64-95
BSA/Triumph 2BA Grease Nipple - T20 Tiger Cub, C15 and Bantam D7, D10, D14 and B175 Models Standard straight swinging arm grease nipple - correct fitment...
+

tank8058-E9
£3.95 (£4.74 inc VAT)
OEM: 42-8058
BSA Fuel Tank Stiffening Plate - A and B Group Swinging Arm Models Circa 1954-59 Locates below the petrol tank - c orrect fitment on swinging arm B31,...
+

wash0660
£0.65 (£0.78 inc VAT)
OEM: 30-0660, 30-660
BSA - 7/16" Plain Washer - Fuel Tank and Frame + Universal Use Rear fuel bank support bolt washer on rigid and plunger frame C10, C11, B31, B32, B33,...
+

wash8740
£0.95 (£1.14 inc VAT)
OEM: 29-8740
BSA - 9/16" Plain Washer - Frame, Fuel Tank and Speedo Drive Fitting + Universal Use Locates under the petrol tank fixing socket bolt the top section of...
+

tank4078-E9
£6.95 (£8.34 inc VAT)
OEM: 42-4078
BSA Fuel Tank Fixing Socket Bolt - A and B Group Swinging Arm and Rigid Models Circa 1954-62 Screws into the top section of the frame under the petrol...
+

b/rod-82-4093
£10.95 (£13.14 inc VAT)
OEM: 82-4093, F4093
19" Brake Rod - Triumph T20 Tiger Cub Models - Circa 1957-69 Correct fitment on Triumph T20 Tiger Cub models from 1957 onwards. Length: 19" (48.3cm)...
+

wash2417
£0.45 (£0.54 inc VAT)
OEM: 60-2417, D2417, 60-4250, D4250, S26-2
Triumph - 1/4" Spring Washer - Various Uses On Pre Unit and Unit Models As used extensively on both pre unit and unit models + universal use as required....
+

bolt4136-C4
£2.95 (£3.54 inc VAT)
OEM: 82-4136, F4136
Triumph Chainguard to Swinging Arm Stepped Bolt - Pre Unit and Unit Twins From 1959 Onwards Stepped chain guard to swinging arm fitting bolt - correct...
+

wash3302
£0.25 (£0.30 inc VAT)
OEM: 70-3302, E3302, 75-0214, 75-214, S21/91
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...
+

wash2184
£0.95 (£1.14 inc VAT)
OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213
Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses  As used extensively on various unit models - cylinder head bolts, frame parts + universal...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.