.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Exhausts

DS337z
£104.95 (£125.94 inc VAT)
OEM: E3651, E3652, 365, 3652, 70-3651, 70-3652
Triumph Exhaust Silencer T110, T100 Big Bore Port 500/650cc 1953-58 Inlet Diameter: 1+3/4" (45mm) OEM: E3651, E3652, 365, 3652, 70-3651, 70-3652...
+

fkbush-set
£6.95 (£8.34 inc VAT)
Exhaust Reducing Bush Set of 3 Comprises of 3 bushes allowing the reduction from 1+3/4inch (45mm) to 1+1/2inch (38mm) Suitable to reduce the size of the...
+

F300HL/F301HR
£159.90 (£191.88 inc VAT)
OEM: 1520, E1520, 70-1520, 1519, E1519, 70-1519
These will fit the Triumph Models: 5T Speed Twin, 6T T100 Dyno chain case Rigid/S-Hub 500/650cc 1939-53 Pipe Diameter: 1+3/4" To fit over the exhaust port...
+

F424HR/F425HL
£159.95 (£191.94 inc VAT)
OEM: 06-5256, 06-5257
These will fit the Norton Models: Commando MK3 850cc This is a complete set of two exhaust pipes to fit a MKIII Norton Commando. 2 pipes without...
+

DS343
£104.95 (£125.94 inc VAT)
OEM: 026782, 02-6782
AJS and Matchless models: 16MS, G3LS 350cc 1954-61 OEM: 026782, 02-6782 A replica of the originals, but these are made from a heavier guage steel than...
+

F309HL/F310HR
£159.90 (£191.88 inc VAT)
OEM: E3992, E3994, 70-3992, 70-3994
These will fit the Triumph Models: 3TA, T21, 5TA, (T100SS with big bore pipe) 350/500cc 1958 on Pipe diameter: 1+1/2"(38mm), cupped at top end to fit...
+

DS254
£104.95 (£125.94 inc VAT)
Triumph TR25W 250cc Inside Frame Peanut Silencer This will fit the Triumph TR25W 250cc - Inside Frame Inlet diameter: 1+3/8" (35mm) Please specify which...
+

F351HL/351HRz
£159.95 (£191.94 inc VAT)
OEM: 70-6370, 70-6372
Triumph Exhaust Pipe High Level 500/650cc - SLASH CUT These are pipes that go down the left hand side of the bike. Two pipes down one side left hand. Suit...
+

wtf-heat002-std
£5.95 (£7.14 inc VAT)
Trials Small Alloy Exhaust / Silencer Heat Shield - Universal Fit Universal flat heat shield / protector which can be fitted to most trials type exhaust...
 

F135
£97.50 (£117.00 inc VAT)
BSA B31, B33, M33, 350/500cc 1954 - Exhaust Pipe Pipe diameter: 1+5/8" (41mm) Made in England, by Feked.com
+

F74
£97.50 (£117.00 inc VAT)
These will fit the Norton Models: MODS 18, 50, ES2 500cc 1936 onwards Rigid Frame Note that this pipe is a VERY tight fit under the gearbox area, in...
+

F325HL/F326HR
£169.95 (£203.94 inc VAT)
OEM: 71-3755, 71-3758
These will fit the Triumph Models: T140V, TR7V (With balance) Push in 750cc 1973 onwards Sold as a set of 3 pieces Pipe diameter: 1+3/8" (35mm) OEM:...
+

Bonkit-004-DS308
£249.95 (£299.94 inc VAT)
Hinckley Triumph Bonneville Premium 'Vickers' Silencers - Complete Kit A complete Vickers Silencer Kit - with all you need to convert your modern...

F329HL/F330HR-BAL
£169.95 (£203.94 inc VAT)
OEM: 70-9363, 70-9364, 9363, E9364, E9722, E9723
These will fit the Triumph Models: T120, TR6 with balance pipe 650cc 1966 on Pipe diameter: 1+3/8" (35mm) Swelling to 1+1/2" (38mm) for silencers...
+

off-sil010
£219.95 (£263.94 inc VAT)
Yamaha TY175 WES Alloy Exhaust All-In-One Silencer - No Tail Pipe This all-in-one type silencer replaces the stock midbox and final silencer...
+

off-pipe005
£116.95 (£140.34 inc VAT)
Yamaha TY250 Front Exhaust Pipe - Stainless Steel - Twinshock Models Right hand fit on TY250 twinshock models. This pipe is designed for use with our...
+

off-pipe008
£74.95 (£89.94 inc VAT)
Honda Front Exhaust Pipe - TLR200 and TLR250 Models - Stainless Steel Right hand fit on Honda TLR 200 and TLR 250 models circa 1983-88. Designed in...
+

F11y
£97.50 (£117.00 inc VAT)
OEM: 018139, 01-8139
AJS and Matchless models: 18S, G80S 500cc 1951-54 - Swing Arm Models OEM: 018139, 01-8139 Pipe Diameter: 1+3/4" These exhausts are made in England...
+

F331HL/F332HRz
£159.95 (£191.94 inc VAT)
OEM: 70-9662, 70-9663, E9662, E9663
These will fit the Triumph Models: T100R, T100S, T90 (With Balance) Over Stub 500cc 1969-70 Pipe diameter: 1+1/4" (32mm) Cupped at head, diameter 1+5/8"...
+

DS284z
£104.95 (£125.94 inc VAT)
Triumph 650cc Twin Silencer to fit the High Level 2 into 1 Siamese Exhaust Pipe Set OEM: E3470, 3470, 70-3470 Also available in Right Hand Side -...
+

F6
£97.50 (£117.00 inc VAT)
AJS and Matchless models: 18S, G80S 500cc 1955 onwards These exhausts are made in England by Feked.com A replica of the original exhaust pipes,...
+

fkunv04
£79.95 (£95.94 inc VAT)
Universal Dunstall Replica Style Silencer These will fit any motorcycle This silencer has a REVERSE CONE end 1+3/8" (35mm) to 1+9/16" (40mm) internal...
+

fkunv19
£59.95 (£71.94 inc VAT)
Universal Upswept Megaphone Style Silencer - Right Hand Side Pipe sweeps up approx 12 degrees off the horizontal Inlet ID: 1+7/16" (36mm) variable...
+

DS300
£104.95 (£125.94 inc VAT)
These will fit the Triumph Models: TR25W 250cc Outside Frame For models with the pipe routing outside the frame. Available in either inlet diameter of...

F34
£99.95 (£119.94 inc VAT)
Triumph Motorcycle Exhaust Pipe TR25W 250cc Inside Frame This pipe routes inside the frame, as per the photographs shown. Pipe OD: 1+3/8"
+

F109
£194.95 (£233.94 inc VAT)
Triumph Exhaust Pipe High Level 350/500cc One Pipe each side Suit 350cc Unit twins Suit 500cc Unit twins These pipes fit one pipe each side of the...
+

ring0265
£26.95 (£32.34 inc VAT)
OEM: 90-0265, 90-265
BSA Bantam Exhaust Locking Flange Nut - D1, D3, D5, D7 and D10 OD: 1+7/8" (47.6mm) ID thread: 1+5/8" (41.3mm) Chrome Plated - Made in England OEM:...
+

off-heat001
£29.95 (£35.94 inc VAT)
Universal Trials Exhaust Heat Shield - Polished Aluminium - 23cm Suited to Honda TLR250 models or universal fit. Polished aluminium with stainless steel...
+

F5y
£97.50 (£117.00 inc VAT)
AJS and Matchless models 18, G80 Iron Head, 500cc 1939-49 - Rigid Frame Pipe Diameter: 1+3/4" These exhausts are made in England, by Feked.com A...
+

DS284x
£104.95 (£125.94 inc VAT)
OEM: E3470, 3470, 70-3470
Triumph 350/500cc Twin Silencer to fit the High Level 2 into 1 Siamese Exhaust Pipe Set OEM: E3470, 3470, 70-3470 Also available in Right Hand Side...
+

DS307
£104.95 (£125.94 inc VAT)
OEM: 42-2725
BSA B31, B33, M33 350/500cc 1954-58 Silencer These will fit the BSA Models: B31, B33, M33 350/500cc 1954-58 Please specify which model when ordering....
+

fkunv20
£59.95 (£71.94 inc VAT)
Universal Upswept Megaphone Style Silencer - Left Hand Side Pipe sweeps up approx 12 degrees off the horizontal Inlet ID: 1+7/16" (36mm) variable to...
+

pipewrap-black
£16.95 (£20.34 inc VAT)
Exhaust Pipe Heat Wrap - Titanium Fibres - Black - 2" Width x 10m 10 metres of black heat wrap and 10 stainless steel ties. Width: 2" (51mm) Thickness -...
+

off-sil008
£79.95 (£95.94 inc VAT)
Yamaha TY175/250 J Type Alloy Exhaust Silencer - Twinshock Models Round profile aluminium silencer with perforated baffling. Removable riveted end cap to...
+

off-pipe007-mid
£49.95 (£59.94 inc VAT)
Honda Swan Neck Exhaust Pipe - TL125 and SL125 Models Mid-section exhaust pipe to fit Honda TL125 and SL125 models. Designed in association with Sammy...

sil300-LH
£74.95 (£89.94 inc VAT)
OEM: 42-2649
BSA A10 RGS / Rocket Gold Star LH Silencer - 1960 Onwards + Universal Use Left hand / nearside silencer - correct fitment on BSA RGS models + suitable for...
+

FS19B-w
£129.95 (£155.94 inc VAT)
OEM: 23767, NM23767, 23768, NM23768
These will fit the Norton Models: Dominator 650SS/Atlas 650/750cc 1962 on Inlet diameter: 1+5/8" (41mm) OEM: 23767, NM23767, 23768, NM23768 Price is...
+

DS262z
£104.95 (£125.94 inc VAT)
Norton 16H 500cc Exhaust Silencer to fit Rigid Frame Bikes from 1936 onwards Please specify which model when ordering Available without Chrome, on some...

DS294z
£104.95 (£125.94 inc VAT)
OEM: E4949, 70-4949
These will fit the Triumph Models: T120, TR6 650cc - 1963-66 Inlet diameter: 1+1/2" (38mm) Total length including ends: 29.5" approx (75cm) OEM:...
+

F16
£109.95 (£131.94 inc VAT)
OEM: 018148, 01-8148
AJS and Matchless models: G80 Jampot CS 500cc 1951 on Competition style, upswept end, to fit between gearbox and footpeg OEM: 018148, 01-8148 These...
+

fkbrack083
£4.95 (£5.94 inc VAT)
Silencer Mounting Bracket 7 inch Chrome Bracket 7" long with bolt, with 5 pre-drilled holes, for securing silencer to motorcycle.
+

DS342
£104.95 (£125.94 inc VAT)
OEM: 66-2865, 66-2991
BSA M20, M21 500/600cc Silencer - 1939-50 Inlet diameter: 1+3/4" (44mm) Barrel diameter: (76mm) OEM: 66-2865, 66-2991 Some of the early WD models had...
+

F401HL/F402HR
£169.90 (£203.88 inc VAT)
OEM: 06-3375, 06-3376
These will fit the Norton Models: Commando Roadster 750cc 1970-73 OEM: 06-3375, 06-3376 Supplied as a Pair, you will get left and right hand pipe. Please...
+

fkunv16
£49.95 (£59.94 inc VAT)
Universal Short style of Silencer - Chrome Either ID: 1+1/2inch (38mm) at one end or 1+3/4inch (45mm) at the other. Length approx 12inches O.D. of large...
+

Bonnie-mainjet-pair
£9.55 (£11.46 inc VAT)
Triumph Hinckley Bonneville Main Jet - Pair - 120/130/140 Pair of jets to fit the Hinckley Bonnie, for use when you need to jet up the carbs after fitting...

F122-Pair
£194.95 (£233.94 inc VAT)
OEM: 42-2957, 42-2959
BSA A10, Road Rocket, Gold Flash 650cc Exhaust Pipes - Swing-Arm models We are fed up with various BSA A10 pipes that don't fit properly, some are too...
+

ring8294
£24.95 (£29.94 inc VAT)
OEM: 82-8294
BSA Bantam Exhaust Locking Flange Nut - D14/4, B175 Models - Big Bore Type For use with 1+3/4" (45mm) exhaust pipe. OD: 2+3/8" (60mm) ID: 2+1/16"...
+

DS321y
£104.95 (£125.94 inc VAT)
Norton ES2, Inter, MOD 50 500cc Exhaust Silencer to fit Plunger Frame Bikes from 1947 onwards Please specify which model when ordering Inlet internal...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.