.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

nut066M-B14
£2.95 (£3.54 inc VAT)
OEM: 67-1537
BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537
+

seal255
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+

pist0594
£224.95 (£269.94 inc VAT)
OEM: 67-0594, 67-594, Hepolite No. 3650
Gandini/GPM Pistons - BSA 650cc A10 OHV Models - Circa 1951-62 Supplied as 2 pistons, complete with rings, gudgeon pins and circlips. Each piston...

gkch704
£1.95 (£2.34 inc VAT)
OEM: 71-1419, E3832, 70-3832, E11419
Triumph Sprocket Cover Gasket - Triumph, BSA Twins To suit: Triumph 350/500/650/750 Twins, BSA Twins A50, A65 etc OEM: 71-1419, E3832, 70-3832, E11419,...
+

nut262-B18
£4.95 (£5.94 inc VAT)
OEM: 70-3905, E3905
Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905
+

bolt014-B19
£8.95 (£10.74 inc VAT)
OEM: 70-6576, 21-2016, 70-2490, E2490, E6576
BIG END BOLT - Triumph Triumph Big end bolt, T120/TR6/6T and others Thread:  5/16" UNF -  24 TPI Note - the correct nut that fits this is 60-3761 see link...
+

filt060-B2
£23.95 (£28.74 inc VAT)
OEM: 83-2646, 84-0027, 83-4783
Triumph T140 Bonneville Oil Sump Gauze Fits early model T140. Normally uses 2 gaskets when you replace this, one each side. See related gasket below OEM:...
+

gear1435-B8
£29.95 (£35.94 inc VAT)
OEM: 57-1435, T1435
Triumph Gear Change Lever - Unit 350/500cc Twins - Circa 1958-74 Chrome plate gear shift lever - correct fitment on 3TA, 5TA, T21, T90 and T100 models...
+

gask0487
£1.95 (£2.34 inc VAT)
OEM: 70-0487
Triumph Sump Gasket - Pre-unit - 70-0487 Single gasket for the Pre-unit Triumph, to use when removing the sump to clear out all the broken bits!!! OEM:...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

nut263-B18
£5.95 (£7.14 inc VAT)
OEM: 70-9492, E9492
Triumph Crankshaft Sludge Trap Plug - Unit 300/500cc Twins Circa 1959-74 Hex oil tube plug - correct fitment on 3TA, 5TA and T100 models from 1959...
+

fkgk825
£48.95 (£58.74 inc VAT)
OEM: E6565, 70-6565, 71-1733, E11733, E7327, 70-7327, E6496, 70-6496, E4752, 70-4752, E6560, 70-6560, E4752, 70-4752, E6516, 70-6516, T2558, 57-2558, T2581, 57-2581
Triumph - 750cc T150 Trident Engine Gasket Set 1968-72 Set contains the following gaskets: Rocker Box Cover x2, Rocker Box x2, Cylinder Head, Cylinder...
+

pist282
£139.95 (£167.94 inc VAT)
One JP Piston for BSA B50 500cc models etc (1971-). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 84mm Standard,...

crod383-Billet
£204.95 (£245.94 inc VAT)
OEM: 70-9525, 70-3606
Triumph T100/T120 Pre Unit, T120 Unit ,TR6/T110 (1956-) Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston....
+

pist509
£144.95 (£173.94 inc VAT)
One JP Piston for AJS 18 500cc or Matchless G80 500cc 1956-1959 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 82.5mm...

gkt608
£2.45 (£2.94 inc VAT)
OEM: 66-3131
BSA M20, M21 etc - Outer Gearbox Gasket Suitable for the later gearbox, the early WD gearbox uses a different gasket. OEM: 66-3131
+

gask1462
£1.25
OEM: 70-5049, E5049, 71-1423, E11432, 71-1462, E11462, 70-7882, E7882
Triumph/BSA Contact Breaker Cover Gasket - Singles and Twins Hole centres approximately 2+3/8" (60mm) apart. Points cover gasket, points gasket. OEM:...
+

sump221B-B3
£41.95 (£50.34 inc VAT)
OEM: 67-1285, 67-1286
BSA Sump Plate - A7/A10/A50/A65 Models CNC manufactured from solid billet alloy Finned alloy sump plate with magnetic drain plug. Supplied with magnetic...
+

seal353t-B7
£12.95 (£15.54 inc VAT)
OEM: E4568, 70-4568, T1956, 57-1956, T3642, 57-3642, D3510, 60-3510, D3500, 60-3500, T3634, 57-3634, T3644, 57-3644
Oil Seal Set - Engine and Gearbox To suit Triumph T150, T160, 1968 - Contains: Contact point seal, Gearbox Seals (5 Speed Option x2), Gearbox final drive...
+

piston2891
£86.95 (£104.34 inc VAT)
OEM: 70-2891
Harris Pistons for Pre-Unit Triumph 6T thunderbird 650cc - 70-2891 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons,...

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

fkgk258v
£21.95 (£26.34 inc VAT)
Norton Motorcycle - 500cc ES2 Engine Gasket Set 1957-66
+

clplt337S-B24
£31.95 (£38.34 inc VAT)
OEM: G40-7, 3360-36, 3360-85, C24AS
Clutch Friction Plates - Burman, Ariel, Panther, Vincent - Standard or Surflex Inside Diameter: 115mm Outside Diameter: 174mm Stub Length: 7.4mm...
 

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

gbox410-B18
£4.45 (£5.34 inc VAT)
OEM: 57-1607
Triumph Gearbox Thrust Washer- 57-1607 Triumph Layshaft gearbox bronze thrust washer. As fitted to T120, TR6, T140, T150 and T160 models. OEM: 57-1607
+

clplt323-B24
£12.95 (£15.54 inc VAT)
OEM: 90-1318
BSA Bantam Clutch friction plate (Surflex) Made in Italy by Surflex 33mm across splines 97mm diameter OEM: 90-1318
+

rings032
£59.95 (£71.94 inc VAT)
OEM: R23020
Set of Hepolite Piston Rings for Triumph Trident T150/T160 750cc. Supplied as 3 sets Hepolite Piston rings. Bore Size : 67mm Standard, available as +.020,...

inlet3940
£55.95 (£67.14 inc VAT)
OEM: 70-3940, E3940, 70-3847, E3847
Triumph Inlet Manifold - Delta Head Pre Unit and Early Unit T120 Models - Circa 1959-63 Left or right hand side inlet manifold for pre unit and early...
+

bear6203
£3.95 (£4.74 inc VAT)
OEM: 90-0010, 06-5542
Ball Bearing 6203-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 40mm ID: 17mm Width: 12mm OEM: 90-0010, 06-5542
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

wash2288
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+

fkgkch009
£2.45 (£2.94 inc VAT)
OEM: 90-0117
Primary Chaincase Gasket - BSA Bantam Suitable for BSA Bantam D1, D3, D7 OEM: 90-0117, 90-117
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

pist295
£149.95 (£179.94 inc VAT)
One JP Piston for BSA C11, C12 250cc models etc (1939-58). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 63mm...

bolt297-B19
£16.95 (£20.34 inc VAT)
OEM: 67-1536
BIG END BOLT - BSA A7, A10 500cc, 650cc OEM: 67-1536
+

smallend1511-B8
£13.95 (£16.74 inc VAT)
OEM: 70-1511, SE106, E1511
Triumph 500/650 Small End Bearing - 70-1511 5T, T100, TR5, 6T, T110, TR6, T120 (1946 -) Small end bush, small end bearing. OEM: 70-1511, SE106, E1511
+

clplt339-B24
£14.95 (£17.94 inc VAT)
Norton 350, 500, 650 singles - Clutch Friction Plates. Surflex Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm These are 4.7mm thick,...
+

pipe851-B3
£37.95 (£45.54 inc VAT)
OEM: 42-8422
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (over gearbox routing) Comes as 2 pipes, approx 13" long, ready to fit. These route over the...
+

kick0024-B4
£21.95 (£26.34 inc VAT)
OEM: 57-0024, T24
Triumph Kickstart Shaft 350/500/650cc Pre Unit + Unit Singles and Twins and T150 Models Circa 1946-74 Correct fitment on various models including pre...
+

filt840m-B3
£10.95 (£13.14 inc VAT)
OEM: 70-3722, E3722
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins Conical type, fits 350/500 unit construction models OEM: 70-3722, E3722
+

bolt762-B19
£2.95 (£3.54 inc VAT)
OEM: 70-4771
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (centre 5/16" bolt) OEM: 70-4771
+

bolt553-B18
£3.45 (£4.14 inc VAT)
OEM: 65-0317
BSA A7, A10 Rocker spindle oil feed bolt OEM: 65-0317

kick3632-S
£119.95 (£143.94 inc VAT)
OEM: 57-1270, T1270, 57-3632, T3632, 57-7018, T7018
Heavy Duty Kickstart Lever - Triumph Pre Unit and Unit Models - Folding Type With Standard Bend Heavy duty kickstart crank assembly suitable for use on...
+

pist325
£82.95 (£99.54 inc VAT)
OEM: 70-4021, E4021, 18786, CP179
Pair of Hepolite Pistons for Triumph T100 500cc models etc (1958-67). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

sprock474H-B5
£23.95 (£28.74 inc VAT)
OEM: 57-1476, T1476
Triumph 19T Gearbox Sprocket - 350/500cc Unit Twins From 1959-74 Front drive sprocket to fit 350/500cc unit twins - T90, 3TA, 5TA, T100 etc. Chain...
+

vguide3208b
£9.45 (£11.34 inc VAT)
OEM: 40-0133, 40-133, G461
BSA Inlet / Exhaust Valve Guide - C15, C15S, C15T Models Circa 1959-65 - Standard or Oversize Suitable for both inlet and exhaust on all C15 models....

pist511
£179.95 (£215.94 inc VAT)
One JP Piston for Ariel Red Hunter 500cc 1935-1946 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 81.8mm Standard,...

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.