.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

bolt716-B19
£3.45 (£4.14 inc VAT)
OEM: 70-0327
Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt) OEM: 70-0327
+

camshaft3134-B7
£69.95 (£83.94 inc VAT)
OEM: 70-3134, E3134, 71-1063, E11063, 70-4819, E4819
Triumph Inlet Camshaft - Unit 650cc Models from 1963-72 + Pre Unit 650cc to 1962 To suit many Triumph 650cc models - T120, T120R, TR6 etc Nitrided...

fkgk305
£17.95 (£21.54 inc VAT)
BSA Motorcycle - 250cc C11 Engine Gasket Set 1939-53
+

clutch1552S-B23
£8.95 (£10.74 inc VAT)
OEM: 57-1552, 57-0455B, T1552, T455B
Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62 Hardened steel clutch operating rod - correct fitment on pre unit...
 

gear341-B8
£37.95 (£45.54 inc VAT)
OEM: 06-1499, 04-1311, 04-0632
Gear Lever Norton, AMC, Gearchange lever with rubber (1956-74). Fits Norton singles and twins with an AMC gearbox. Splined shaft diameter 5/8" OEM:...
+

fksump220-B3
£26.95 (£32.34 inc VAT)
OEM: 65-2611
BSA Sump Plate - M and B Models Suit B & M Models of BSA Finned cast alloy sump plate with magnetic drain plug. Comes with Gasket, Brass magnetic sump...
+

bolt660-B19
£3.95 (£4.74 inc VAT)
OEM: 70-1596
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension) OEM: 70-1596
+

vvg400
£99.95 (£119.94 inc VAT)
OEM: 67-0031, 67-0323, 67-0324, 67-0742, 67-0743
BSA A10 Iron Head models Complete Valve Guide Set (1949-62). Includes Guides and Valves. Valve Guides : Set of 4 Cast Iron Guides (67-0031) OEM: 67-0031,...
+

valve0236-B22
£33.95 (£40.74 inc VAT)
OEM: 66-0236
BSA M20, M21 Exhaust Valve Alpha valve number V20 Made in England OEM: 66-0236
+

pist288
£279.95 (£335.94 inc VAT)
Set of JP Pistons for BSA A10 Super Rocket 650cc models etc (1952-63). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size...

filt407-B7
£49.95 (£59.94 inc VAT)
OEM: 19-4589, 99-1179
Triumph Sump Plate / Oil Filter Kit - 650/750cc Oil in Frame Models Complete kit containing: Billet alloy sump plate Oil filter base plate Oil...
+

sprock476-B5
£24.95 (£29.94 inc VAT)
OEM: 57-0471A
Triumph T120, T110, T6, 5T Pre Unit models (1947-62) Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 18 OEM: 57-0471A, T471A, T471A/18, 57-0471/18
+

seal3530
£0.95 (£1.14 inc VAT)
OEM: 70-3309, 60-3530, E3309, D3530
Triumph/BSA Gear Lever Shaft O Ring Seal - 350/500/650/750cc Unit + BSA B25, B50 OD: 11/16" (17.8mm) ID: 9/16" (14mm) OEM: 70-3309, 60-3530, E3309, D3530
+

rod1505-B17
£18.95 (£22.74 inc VAT)
OEM: 70-1505, E1505
Triumph Pushrod Tube - Pre Unit Iron Head Models - Circa 1938-62 Push rod tube, with oil drain hole. Fits pre-unit 5T, T100, 6T, T110, T120 models with...

spr032-B24
£1.95 (£2.34 inc VAT)
OEM: 57-0999, T999, 42-3273, 68-3236
Triumph Clutch Spring, for Triumph 3TA, 5TA, T100 etc Correct fitment on models with a four spring clutch with 5 driving (friction) plates and 6 driven...
+

liner333
£49.95 (£59.94 inc VAT)
OEM: FS.2543, 70-3592
Hepolite Triumph T100 Alloy Cylinder Liner for pre unit models. Made in England. Hepolite FS.2543 Bore size : 2.4803" (63mm) OEM: FS.2543, 70-3592 Allows you...
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

pist256
£145.95 (£175.14 inc VAT)
One JP Piston for BSA B34 Goldstar 500cc models etc (1954-59). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 85mm...

rod3329-B17
£18.95 (£22.74 inc VAT)
OEM: 71-3329, E13329
Triumph 750cc Twin Pushrod Tube - T140, TR7 Models Circa 1973-78 Correct fitment on earlier 750cc twins from 1973-78. Chrome plated - made in England....
+

nut3735-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735
+

piston1563
£89.95 (£107.94 inc VAT)
OEM: 70-1563, E1563
Harris Pistons for Pre-Unit Triumph 5T 500cc - 70-1563 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...

fk420half
£3.95 (£4.74 inc VAT)
420 Regina Classic Motorcycle Chain Half Link To fit 125EBSR 1/2" x 3/16" (P x W) standard 420 chain equivalent to Renold 110044. Allows you to make up...
+

wash1962-B13
£0.95 (£1.14 inc VAT)
OEM: 57-1962
Gearbox/Kickstart Sleeve Pinion Washer - Triumph T120, T140 OD: 1+1/8" (28mm) ID: 3/4" (19mm) OEM: 57-1962
+

fkgk309
£27.95 (£33.54 inc VAT)
BSA Motorcycle - 350cc B31, B32 (Alloy Head) Engine Gasket Set 1950-61
+

fkgk165z
£27.95 (£33.54 inc VAT)
AJS Motorcycle - 350cc 16, 16MS Engine Gasket Set 1949-61 AJS Model 16, AJS Model 16MS 350cc - Complete Engine Gasket Set from 1949 to 1961 The Gasket set...
+

sprock428H-B5
£23.95 (£28.74 inc VAT)
OEM: 57-1476, T1476
Triumph 18T Gearbox Sprocket - 350/500cc Unit Twins From 1959-74 Front drive sprocket to fit 350/500cc unit twins - T90, 3TA, 5TA, T100 etc. Chain...
+

clutch9906-B23
£114.95 (£137.94 inc VAT)
Clutch hub complete Shock Assembly Triumph clutch hub centre complete, for unit and pre-unit Triumph This is the complete centre unit, including the...
+

3.0mm-cork
£5.00 (£6.00 inc VAT)
Nitrile  Cork Gasket Material - 3.0mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet Nitrile bonded cork has good oil resistance, is...

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

gkch015
£2.95 (£3.54 inc VAT)
OEM: 70-7856
Primary Chaincase Gasket - BSA B44 (1968-70), B25, C25, B50 , Triumph TR25W, T25, B25, C25 This is for SOME models, please see our other gasket gkch004 for...
+

box076-G15
£42.95 (£51.54 inc VAT)
OEM: 60-3213, 60-7091, 99-9990
Speedometer Gearbox, Ratio 1.25:1 Suit Models fitted with Magnetic type speedo after 1966. Wheel spindle hole: 5/8" (16mm) Gearbox drive hole: 2"...
+

gkt930
£1.75 (£2.10 inc VAT)
Triumph Inner Gearbox Gasket 350cc, 500cc Unit Twins To fit Triumph 3TA, 5TA, T90, T100 and other unit models of the Triumph Twin, circa 1958-74 OEM:...
+

spann124
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061
+

wash0239
£0.95 (£1.14 inc VAT)
OEM: 40-0239, NE507, 99-3540
Triumph / BSA Fibre Washer - Chaincase Inspection Plug + Gearbox Filler Cap - 1+1/4" Various uses on many single and twins. OD: 1+1/4" (31mm) ID: 1"...
+

nut997-B18
£5.45 (£6.54 inc VAT)
OEM: 67-1211
BSA Large Journal Crankshaft Sludge Trap Plug - A10, A50 and A65 Models  To fit large journal crankshafts as used on pre-unit A10 models from 1958-62 and...
+

pillarbolt513-B19
£1.95 (£2.34 inc VAT)
OEM: 40-0683, 70-4747
Contact breaker pillar bolt. To secure the contact points set on side points models, also secures the points cover. Fits BSA C15/B44/B50 and Triumph...
+

fkgk805
£31.95 (£38.34 inc VAT)
Triumph Motorcycle - 650cc Thunderbird (Iron Head), TR6, TR110 (Pre unit) Engine Gasket Set 1949-55
+

clutch002-B23
£87.95 (£105.54 inc VAT)
OEM: 04-0366
Clutch hub centre for Norton, AMC, AJS, Matchless OEM: 040366, 04-0366
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

gearbox3660-B13
£8.95 (£10.74 inc VAT)
OEM: 57-3660, T3660, T44, 68-0098, 68-98, 57-0260 57-4308
Triumph/BSA 4 Speed Gearbox Camplate Index Plunger - Pre-Unit & Unit Models Correct fitment for BSA A50 & A65 models + 650/750cc Triumph Unit...
+

tapp070H-B18
£4.95 (£5.94 inc VAT)
OEM: 70-1513, 67-0056
Hexagonal Tappet Adjuster - Triumph T120/T140 and BSA A7/A10 CEI thread Approx diameter across thread = 5/16" (8mm) OEM: 70-1513, 67-0056
+

bigend212-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, 70-3510, B2026M, E3586, E3510
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 020 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

gearbox4403-B13
£8.95 (£10.74 inc VAT)
OEM: 57-4403, T4403
Triumph Gearchange Quadrant Plunger - 5 Speed 650/750cc Twins and Triples + Conversions Gearbox plunger - correct fitment on five speed T120, TR6, T140,...
+

nut0103-B14
£0.95 (£1.14 inc VAT)
OEM: 37-0103, W103, 40-3226
1/4" x 26 CEI Nut - Various Uses on Pre Unit and Unit Triumph and BSA Models Used extensively for many applications including cylinder head, manifold...
+

fkchain-c120-B12
£19.95 (£23.94 inc VAT)
OEM: 110037, C120SR
Regina Single Mag Dyno / Camshaft Chain 3/8" x 5/32" Pitch - Endless Simplex chain 3/8" Pitch x 5/32" Width - Endless. Suitable for some magneto,...

fksprock435-B5
£15.95 (£19.14 inc VAT)
OEM: 40-3041
BSA C15, B40 Gearbox Sprocket 13T Chain Pitch: 1/2" x 5/16" (428) Number of Teeth: 13 OEM: 40-3041
+

headgk016
£15.95 (£19.14 inc VAT)
OEM: 71-3681, E13681
Triumph Cylinder Head Gasket 750cc Twins - 10 Hole - Standard or Extra Thick Solid copper cylinder head gasket as fitted to 10 stud T140 and TR7 models...

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.