.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

fksprock435-B5
£15.95 (£19.14 inc VAT)
OEM: 40-3041
BSA C15, B40 Gearbox Sprocket 13T Chain Pitch: 1/2" x 5/16" (428) Number of Teeth: 13 OEM: 40-3041
+

nut262-B18
£4.95 (£5.94 inc VAT)
OEM: 70-3905, E3905
Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905
+

gkch704
£1.95 (£2.34 inc VAT)
OEM: 71-1419, E3832, 70-3832, E11419
Triumph Sprocket Cover Gasket - Triumph, BSA Twins To suit: Triumph 350/500/650/750 Twins, BSA Twins A50, A65 etc OEM: 71-1419, E3832, 70-3832, E11419,...
+

nut066M-B14
£2.95 (£3.54 inc VAT)
OEM: 67-1537
BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537
+

seal255
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+

pist0594
£224.95 (£269.94 inc VAT)
OEM: 67-0594, 67-594, Hepolite No. 3650
Gandini/GPM Pistons - BSA 650cc A10 OHV Models - Circa 1951-62 Supplied as 2 pistons, complete with rings, gudgeon pins and circlips. Each piston...

gask0487
£1.95 (£2.34 inc VAT)
OEM: 70-0487
Triumph Sump Gasket - Pre-unit - 70-0487 Single gasket for the Pre-unit Triumph, to use when removing the sump to clear out all the broken bits!!! OEM:...
+

gask1462
£1.25
OEM: 70-5049, E5049, 71-1423, E11432, 71-1462, E11462, 70-7882, E7882
Triumph/BSA Contact Breaker Cover Gasket - Singles and Twins Hole centres approximately 2+3/8" (60mm) apart. Points cover gasket, points gasket. OEM:...
+

bolt014-B19
£8.95 (£10.74 inc VAT)
OEM: 70-6576, 21-2016, 70-2490, E2490, E6576
BIG END BOLT - Triumph Triumph Big end bolt, T120/TR6/6T and others Thread:  5/16" UNF -  24 TPI Note - the correct nut that fits this is 60-3761 see link...
+

gear1435-B8
£29.95 (£35.94 inc VAT)
OEM: 57-1435, T1435
Triumph Gear Change Lever - Unit 350/500cc Twins - Circa 1958-74 Chrome plate gear shift lever - correct fitment on 3TA, 5TA, T21, T90 and T100 models...
+

filt060-B2
£23.95 (£28.74 inc VAT)
OEM: 83-2646, 84-0027, 83-4783
Triumph T140 Bonneville Oil Sump Gauze Fits early model T140. Normally uses 2 gaskets when you replace this, one each side. See related gasket below OEM:...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

nut263-B18
£5.95 (£7.14 inc VAT)
OEM: 70-9492, E9492
Triumph Crankshaft Sludge Trap Plug - Unit 300/500cc Twins Circa 1959-74 Hex oil tube plug - correct fitment on 3TA, 5TA and T100 models from 1959...
+

gkt608
£2.45 (£2.94 inc VAT)
OEM: 66-3131
BSA M20, M21 etc - Outer Gearbox Gasket Suitable for the later gearbox, the early WD gearbox uses a different gasket. OEM: 66-3131
+

wash2288
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+

fkgk825
£48.95 (£58.74 inc VAT)
OEM: E6565, 70-6565, 71-1733, E11733, E7327, 70-7327, E6496, 70-6496, E4752, 70-4752, E6560, 70-6560, E4752, 70-4752, E6516, 70-6516, T2558, 57-2558, T2581, 57-2581
Triumph - 750cc T150 Trident Engine Gasket Set 1968-72 Set contains the following gaskets: Rocker Box Cover x2, Rocker Box x2, Cylinder Head, Cylinder...
+

pist282
£139.95 (£167.94 inc VAT)
One JP Piston for BSA B50 500cc models etc (1971-). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 84mm Standard,...

crod383-Billet
£204.95 (£245.94 inc VAT)
OEM: 70-9525, 70-3606
Triumph T100/T120 Pre Unit, T120 Unit ,TR6/T110 (1956-) Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston....
+

pist509
£144.95 (£173.94 inc VAT)
One JP Piston for AJS 18 500cc or Matchless G80 500cc 1956-1959 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 82.5mm...

sump221B-B3
£41.95 (£50.34 inc VAT)
OEM: 67-1285, 67-1286
BSA Sump Plate - A7/A10/A50/A65 Models CNC manufactured from solid billet alloy Finned alloy sump plate with magnetic drain plug. Supplied with magnetic...
+

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

seal353t-B7
£12.95 (£15.54 inc VAT)
OEM: E4568, 70-4568, T1956, 57-1956, T3642, 57-3642, D3510, 60-3510, D3500, 60-3500, T3634, 57-3634, T3644, 57-3644
Oil Seal Set - Engine and Gearbox To suit Triumph T150, T160, 1968 - Contains: Contact point seal, Gearbox Seals (5 Speed Option x2), Gearbox final drive...
+

piston2891
£86.95 (£104.34 inc VAT)
OEM: 70-2891
Harris Pistons for Pre-Unit Triumph 6T thunderbird 650cc - 70-2891 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons,...

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

clplt337S-B24
£31.95 (£38.34 inc VAT)
OEM: G40-7, 3360-36, 3360-85, C24AS
Clutch Friction Plates - Burman, Ariel, Panther, Vincent - Standard or Surflex Inside Diameter: 115mm Outside Diameter: 174mm Stub Length: 7.4mm...
 

fkgk258v
£21.95 (£26.34 inc VAT)
Norton Motorcycle - 500cc ES2 Engine Gasket Set 1957-66
+

gbox410-B18
£4.45 (£5.34 inc VAT)
OEM: 57-1607
Triumph Gearbox Thrust Washer- 57-1607 Triumph Layshaft gearbox bronze thrust washer. As fitted to T120, TR6, T140, T150 and T160 models. OEM: 57-1607
+

inlet3940
£55.95 (£67.14 inc VAT)
OEM: 70-3940, E3940, 70-3847, E3847
Triumph Inlet Manifold - Delta Head Pre Unit and Early Unit T120 Models - Circa 1959-63 Left or right hand side inlet manifold for pre unit and early...
+

clplt323-B24
£12.95 (£15.54 inc VAT)
OEM: 90-1318
BSA Bantam Clutch friction plate (Surflex) Made in Italy by Surflex 33mm across splines 97mm diameter OEM: 90-1318
+

rings032
£59.95 (£71.94 inc VAT)
OEM: R23020
Set of Hepolite Piston Rings for Triumph Trident T150/T160 750cc. Supplied as 3 sets Hepolite Piston rings. Bore Size : 67mm Standard, available as +.020,...

bear6203
£3.95 (£4.74 inc VAT)
OEM: 90-0010, 06-5542
Ball Bearing 6203-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 40mm ID: 17mm Width: 12mm OEM: 90-0010, 06-5542
+

fkgkch009
£2.45 (£2.94 inc VAT)
OEM: 90-0117
Primary Chaincase Gasket - BSA Bantam Suitable for BSA Bantam D1, D3, D7 OEM: 90-0117, 90-117
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

pist295
£149.95 (£179.94 inc VAT)
One JP Piston for BSA C11, C12 250cc models etc (1939-58). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 63mm...

bolt297-B19
£16.95 (£20.34 inc VAT)
OEM: 67-1536
BIG END BOLT - BSA A7, A10 500cc, 650cc OEM: 67-1536
+

smallend1511-B8
£13.95 (£16.74 inc VAT)
OEM: 70-1511, SE106, E1511
Triumph 500/650 Small End Bearing - 70-1511 5T, T100, TR5, 6T, T110, TR6, T120 (1946 -) Small end bush, small end bearing. OEM: 70-1511, SE106, E1511
+

kick0024-B4
£21.95 (£26.34 inc VAT)
OEM: 57-0024, T24
Triumph Kickstart Shaft 350/500/650cc Pre Unit + Unit Singles and Twins and T150 Models Circa 1946-74 Correct fitment on various models including pre...
+

clplt339-B24
£14.95 (£17.94 inc VAT)
Norton 350, 500, 650 singles - Clutch Friction Plates. Surflex Plate Inside Diameter: 90mm(between stubs) Outside Diameter: 148mm These are 4.7mm thick,...
+

pipe851-B3
£37.95 (£45.54 inc VAT)
OEM: 42-8422
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (over gearbox routing) Comes as 2 pipes, approx 13" long, ready to fit. These route over the...
+

filt840m-B3
£10.95 (£13.14 inc VAT)
OEM: 70-3722, E3722
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins Conical type, fits 350/500 unit construction models OEM: 70-3722, E3722
+

bolt762-B19
£2.95 (£3.54 inc VAT)
OEM: 70-4771
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (centre 5/16" bolt) OEM: 70-4771
+

kick3632-S
£119.95 (£143.94 inc VAT)
OEM: 57-1270, T1270, 57-3632, T3632, 57-7018, T7018
Heavy Duty Kickstart Lever - Triumph Pre Unit and Unit Models - Folding Type With Standard Bend Heavy duty kickstart crank assembly suitable for use on...
+

bolt553-B18
£3.45 (£4.14 inc VAT)
OEM: 65-0317
BSA A7, A10 Rocker spindle oil feed bolt OEM: 65-0317

pist325
£82.95 (£99.54 inc VAT)
OEM: 70-4021, E4021, 18786, CP179
Pair of Hepolite Pistons for Triumph T100 500cc models etc (1958-67). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

sprock474H-B5
£23.95 (£28.74 inc VAT)
OEM: 57-1476, T1476
Triumph 19T Gearbox Sprocket - 350/500cc Unit Twins From 1959-74 Front drive sprocket to fit 350/500cc unit twins - T90, 3TA, 5TA, T100 etc. Chain...
+

vguide3208b
£9.45 (£11.34 inc VAT)
OEM: 40-0133, 40-133, G461
BSA Inlet / Exhaust Valve Guide - C15, C15S, C15T Models Circa 1959-65 - Standard or Oversize Suitable for both inlet and exhaust on all C15 models....

gkt425
£1.95 (£2.34 inc VAT)
OEM: 71-3096
Triumph TR6/T120 650/750cc inner gearbox gasket OEM: 71-3096, E13096
+

gear3257-B23
£15.95 (£19.14 inc VAT)
OEM: 68-3257
BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...
+

wash1330-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1330, 40-0157, E1330, 40-157
Triumph / BSA Rocker Spindle Thrust Washer - Various Pre Unit and Unit Models Correct fitment on pre unit and unit models - singles, twins and triples...
+

rod3372-B17
£6.95 (£8.34 inc VAT)
OEM: 70-3372, E3372
Triumph Engine Push Rod - T15 Terrier and Tiger Cub T20 Models - 1954 Onwards Length: 6+1/2" (165mm) Premium Quality - Made in England OEM: 70-3372,...
+

pist511
£179.95 (£215.94 inc VAT)
One JP Piston for Ariel Red Hunter 500cc 1935-1946 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 81.8mm Standard,...

fk530-rivet-B12
£2.99 (£3.59 inc VAT)
Classic Motorcycle Chain Rivet Link 530
+

fkrub29
£1.99 (£2.39 inc VAT)
Ariel Kickstart Rubber - closed Suit Heavyweight Ariels - Closed end Length: 3+1/2" Hole: 9/16"
+

spring152-B24
£1.99 (£2.39 inc VAT)
OEM: 66-3800
BSA Clutch Spring - 6 Spring version - 66-3800 BSA Clutch spring for Six spring clutches as fitted to BSA A, B and M Group models including :- A7, A10...
+

tapp1513A-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1513, E1513, 67-0056, 67-56
Triumph/BSA Mushroom Head Tappet Adjuster - Pre Unit + 650/750cc Unit Twins + A7 and A10 Models - 1946 On Rocker adjusting pin with mushroom head and hex...
+

kick124-G3
£37.95 (£45.54 inc VAT)
OEM: 06-1464, 06-1059, 06.1464, 06.1059
Norton Commando Kickstart Lever - 750/850cc MK1 and MK2 Models - Circa 1968-74 Complete kickstart crank assembly suitable for all MK1 and MK2 Commando...
+

filt0529-B3
£17.95 (£21.54 inc VAT)
OEM: 70-0529, E529
Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962 Correct fitment for all pre unit twins 350/500/650cc - 3T, T100,  5T, 6T, T110,...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

pist301
£285.95 (£343.14 inc VAT)
Set of JP Pistons for BSA A50 500cc models etc (1962-64). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size : 65.5mm...

valvecollar3296-B13
£4.95 (£5.94 inc VAT)
OEM: 71-3296, E13296, 70-1544, E1544
Triumph Valve Spring Bottom Collar - 650/750cc Twins - 1963-82 Triumph various models, valve spring retaining collar, sits under the valve spring...
+

pist033-H
£82.95 (£99.54 inc VAT)
OEM: 06-7055, 19145, 06-3338, 06-3339, 06-3342, 06-3343, 06-3346, 06-3347
Pair of Hepolite Pistons for Norton Commando 750cc models (1964-73). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

spann125
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 5 speed sprocket nut 1 7/8" Measures 48mm across inside flats.
+

clplt272b-B24
£8.95 (£10.74 inc VAT)
OEM: 57-1362, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates (4 Spring Clutch) Also some BSA A7/A10 models with 4 spring clutch Inside Diameter: 106mm Outside Diameter: 155mm Stub...
+

pist0630
£139.95 (£167.94 inc VAT)
OEM: 40-0630, 40-0632, 40-0634, 40-630, 40-632, 40-634
Gandini/GPM Piston - BSA C15 / BSA C25 - Circa 1959-67 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 1/16" Piston rings - 1st...

fkgk335-tri
£24.95 (£29.94 inc VAT)
Triumph TR25W, T25SS, T25T - 250cc Engine Gasket Set Triumph TR25W, Triumph T25SS and Triumph T25T 250cc Engine Gasket set - from 1967 to 1970 Includes...
+

fkgk814Bz
£33.95 (£40.74 inc VAT)
Triumph Motorcycle - 500cc Speed Twin, 5TA (Thick Copper Head Gasket) Engine Gasket Set 1958-66 Triumph 5TA, Triumph Speed Twin,  with Thick Copper Head...
+

oilseal40526
£4.95 (£5.94 inc VAT)
OEM: 40-0025, 40-25
BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket Use in conjunction with the Talon 18T engine sprocket on BSA C15, C25,...
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

kick009-G3
£37.95 (£45.54 inc VAT)
OEM: 42-3037
Kickstart Lever BSA A and B Models - Spring Top, Folding Type - 1954 Onwards Chrome plated forged steel. Plain Spindle hole 3/4" diameter. OEM type with...
+

gkch004
£2.95 (£3.54 inc VAT)
OEM: 40-1020, 40-0247
Primary Chaincase Gasket - BSA C15 B25, C25, B40, B44. This is for SOME models, please see our other gasket gkch015 for the other models. See the photos for...
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

fksprock480-B5
£22.95 (£27.54 inc VAT)
OEM: 41-3092
BSA/Triumph 17T Gearbox Sprocket - C25, B25 B44, B50 and TR25W Models Chain Pitch: 5/8" x 1/4" (520) Number of Teeth: 17 Available as standard or...

bush0412-B8
£3.95 (£4.74 inc VAT)
OEM: 57-0412, T412
Triumph Gear Change Inner Spindle Bush - Pre Unit and Unit Models Circa 1939-74 Correct fitment on many Triumph models including: Pre unit 350/500/650cc...
+

kick1422-B4
£5.45 (£6.54 inc VAT)
OEM: 57-1422
Kickstart Stop Plate - Triumph 350/500cc Unit Twins Kickstart return spring plate - 3TA, 5TA, T90 and T100 models circa 1958 onwards. OEM: 57-1422,...
+

pipe308-B3
£19.95 (£23.94 inc VAT)
OEM: 71-3550
Triumph T140, TR7 rocker oil feed pipe OEM: 71-3550
+

camshaft-9989-B7
£69.95 (£83.94 inc VAT)
OEM: 70-9989, E9989, 70-5048, E5048
Triumph 650cc Exhaust Half Race Camshaft - 70-9989 To suit Triumph 650cc motorcycles Triumph T120, T120R, TR6 etc Nitrided Camshaft, Quality Product. OEM:...

bush3151-B8
£13.95 (£16.74 inc VAT)
OEM: 67-3151
BSA Kickstart Inner Bush - A and B Plunger & Swing Arm Models + C Models Length: 1+3/32" (27.5mm) ID: 9/16" (14.3mm) OD: 11/16" (17.5mm) OEM: 67-3151
+

fkchain-251r-B12
£29.95 (£35.94 inc VAT)
OEM: 110500, 67-0296, 67-296, 29-2199, 10343-54
52 Link Endless Dynamo Chain - BSA A7/A10 + C Group Models + Ariel Huntmaster As used on A7 and A10 models circa 1947-63 + C group models circa 1939-53....
+

vvg420
£99.95 (£119.94 inc VAT)
OEM: 70-2899, 70-1480, 70-2900, 70-1956
Triumph 5T Iron head (1946-59) Complete Valve Guide set. Includes guides and valves. Valve Guides : Set of 4 Cast Iron Guides (70-2899/70-1480 and 70-2900)...
+

pist471-JP
£229.95 (£275.94 inc VAT)
Set of JP Pistons for BSA A10, Gold Flash 650cc models etc (1950-62). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size :...

fkclutch134-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0389
CLUTCH SPRING NUT - AMC, Norton Norton, AMC clutch spring adjuster nut for models using pre-Commando AMC clutches 3 nuts usually required per clutch...
+

pmp222
£299.95 (£359.94 inc VAT)
OEM: 42-0115, 42-115, 67-1402, 67-1381
BSA Oil Pump Assembly With Tacho Drive Extension - A7 and A10 Models Circa 1949-63 Complete oil pump suitable for A7 and A10 plunger and swinging arm...
+

clplt334-B24
£6.45 (£7.74 inc VAT)
OEM: 04-3191
Norton Singles and Twins 350, 500, 650 (1959-) - Clutch Steel Plates Inside Diameter: 96mm Outside Diameter: 150mm Stub Length: 15mm OEM: 04-3191...

vguide3828
£11.95 (£14.34 inc VAT)
OEM: 70-3828, E3828, G424PB
Triumph Exhaust Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 2+9/32", 2.27" (57.7mm) Available as standard, +.002...

pipe249
£21.95 (£26.34 inc VAT)
OEM: 40-0183, 40-183, 47-8397, 41-0807, 41-807
BSA Rocker Oil Feed Pipe - C15, B25, B40, B44, B50 Models A rocker oil feed pipe and banjo assembly to fit many of the BSA unit singles. Designed to be...
+

gear3171-B8
£39.95 (£47.94 inc VAT)
OEM: 67-3171, 42-3010, 65-3417, 65-3380
BSA Gear Lever - Long Type - A, B, C and M Group Models Circa 1938-54 Dog-legged gear change lever - as fitted to many models rigid, plunger and swinging...
+

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

fkchain520-oring
£66.95 (£80.34 inc VAT)
O-Ring EXTRA HEAVY DUTY Motorcycle Drive Chain 520 - 106 to 120 links 5/8" x 1/4" (P x W) These chains incorporate a rubber O-shaped seal that fits between...

gear1417-B4
£2.95 (£3.54 inc VAT)
OEM: 57-1417, T1417
Triumph Gear Change Indicator Plate - 350/500cc Unit Twins - 1957-74 Fits on top of the inner gearbox cover Length 1+7/32" (38.7mm) Mounting holes -...
+

shaft4260-B7
£94.95 (£113.94 inc VAT)
OEM: 15-4260
BSA Gearbox Mainshaft - B31, B32, B33, B34, M20, M21 - Circa 1949-62 Suitable for BSA B and M group models - plunger and rigid frame. Genuine new old...
+

bolt1872-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1872, S1872
Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...
+

pist238
£241.95 (£290.34 inc VAT)
Pair of JP Piston for AJS 20 500cc or Matchless G9 500cc 1949-1955 Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 66mm...

fkgk833
£37.95 (£45.54 inc VAT)
OEM: E11461, 70-11461, E1670, 70-1670, E5660, 70-5660, E12599, 70-12599, E4547, 70-4547, E6309, 70-6309, E4752, 70-4752, E7310, 70-7310, E11283, 70-11283, E12574, 70-12574, E8771, 70-8771, E11462, 70-11462, E11419, 70-11419, E11463, 70-11463
Triumph - 650cc Trophy TR6C, Bonneville, T120R, Tiger TR6R Engine Gasket Set 1972-73 Set contains the following gaskets: Rocker Cover x2, Cylinder Head,...
+

bush3153-B8
£15.95 (£19.14 inc VAT)
OEM: 67-3153
BSA Kickstart Spindle Outer Bush - A and B Plunger & Swing Arm Models + C Models Length: 1+5/32" (29.2mm) ID: 3.4" (18.7mm) OD: 7/8" (22.2mm) OEM:...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.