.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

clutch3235-B23
£57.95 (£69.54 inc VAT)
OEM: 42-3235
BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...
+

hub3170A-B23
£49.95 (£59.94 inc VAT)
OEM: 42-3170A
BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

fkcap029-F2
£22.95 (£27.54 inc VAT)
OEM: 90-8035
2" Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel/oil cap with offset vent - push turn fit and integral cork seal. Will fit most oil tanks...
+

vguide3827
£11.95 (£14.34 inc VAT)
OEM: 70-3827, E3827, G420PB
Triumph Inlet Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 1+31/32", 1.97" (50.1mm) Available as standard, +.002...

vguide3828
£11.95 (£14.34 inc VAT)
OEM: 70-3828, E3828, G424PB
Triumph Exhaust Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 2+9/32", 2.27" (57.7mm) Available as standard, +.002...

valve2899
£9.95 (£11.94 inc VAT)
OEM: E2899, 70-2899, E1480, 70-1480, G420
Triumph Inlet Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59, TR5 models circa...

valve2900
£9.95 (£11.94 inc VAT)
OEM: E2900, 70-2900, G424
Triumph Exhaust Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59,  TR5 models...

headgk036
£15.95 (£19.14 inc VAT)
OEM: 70-4015, E4015, 70-4675, E4675
Triumph Cylinder Head Gasket - 500cc Unit Twins Circa 1959-74 - 0.048" or 0.03" Thickness Solid copper head gasket suitable for 5TA and T100 models....
 

bush0412-B8
£3.95 (£4.74 inc VAT)
OEM: 57-0412, T412
Triumph Gear Change Inner Spindle Bush - Pre Unit and Unit Models Circa 1939-74 Correct fitment on many Triumph models including: Pre unit 350/500/650cc...
+

plate4016G-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4016G, E4016G
Triumph Patent Plate - TRW Side Valve Models Brass timing cover triangular name plate for 500cc side valve twins. Supplied with 3 brass  hammer drive...
+

stud0672-B19
£2.45 (£2.94 inc VAT)
OEM: 70-0672, E672
Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

stud3523-B14
£2.45 (£2.94 inc VAT)
OEM: 70-3523, E3523
Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

inlet639-pair
£26.95 (£32.34 inc VAT)
Webco Style Single to Twin Carb Conversion Inlet Manifolds - Triumph Pre Unit and Unit 650cc Models Convert from single to twin carb using this pair of...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

plug1212-B18
£11.95 (£14.34 inc VAT)
OEM: 67-1212
BSA Large Journal Crankshaft Sludge Trap Plug With Extension - A10 + Early A50 and A65 Models To fit large journal crankshafts as used on pre-unit A10...
+

kick3275-B4
£9.45 (£11.34 inc VAT)
OEM: 40-3275, 57-2687, T2687
BSA/Triumph Kickstart Return Spring - Unit Singles Circa 1965-70 Correct fitment on later side points  C15, B40 models + C25, B25, B44, T25 and TR25W...
+

gbox3258-B13
£1.45 (£1.74 inc VAT)
OEM: 40-3258, 57-2670, T2670
BSA/Triumph Gearbox Layshaft Thrust Washer/Shim - Unit Singles Circa 1965-72 As used on later  C15 models + C25, B25, B40, B44, B50, T250, TR25W models....
+

washer3121-B13
£1.95 (£2.34 inc VAT)
OEM: 40-3121, 40-3050, 57-2702, T2702
BSA/Triumph Gearbox Sprocket Tab Washer - A50, A65 Models + Unit Singles Correct fitment on all A50 and A65 models plus unit BSA and Triumph singles -...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

clutch3259-E12
£7.95 (£9.54 inc VAT)
OEM: 68-3259
BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable connector assembly to...
+

fkgk057
£11.95 (£14.34 inc VAT)
OEM: 67-1582, 36-0481, 15-203,15-0203, 67-0279, 67-1583
BSA A7, A10, 500cc, 650cc Rocker Box Gasket Set Suit A7, A10, Star, Shooting Star, Golden Flash, Road Rocket, Super Rocket models. Comprises of 5 gaskets...
+

fkgk3743
£2.85 (£3.42 inc VAT)
OEM: 70-3743, E3743
Triumph Rocker Box Gasket - 350/500cc Unit Models Circa 1958-68 Original type rocker box gasket without the pushrod holes, as used on earlier 3TA, T90,...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

bear0015-B8
£67.95 (£81.54 inc VAT)
OEM: 68-0015, 68-15
BSA Crankshaft Timing Side Bearing/Bush - A50 and A65 Models Circa 1962-65 Thicker flange early type - available as standard, -.010, -.020, -.030, -.040,...

wash427-C4
£1.95 (£2.34 inc VAT)
OEM: 82-3069, F3069, 82-9092, F9092
Triumph Head Steady Spacer - Unit 650cc Models Circa 1963-70 Engine torque stay distance piece for 6T, T120 and TR6 models - 4 required. OD: 5/8" (16mm)...
+

nut2204-B14
£5.95 (£7.14 inc VAT)
OEM: 21-2204, S2204
Triumph Cylinder Head Socket Nut - 3/8" UNF - T140/TR7 Models Circa 1973-83 Cylinder head sleeve socket with 3/8" 24 TPI UNF thread and Allen key head....
+

gear3257-B23
£15.95 (£19.14 inc VAT)
OEM: 68-3257
BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...
+

pump-gkt-3910
£0.75 (£0.90 inc VAT)
OEM: 71-3910, E13910
Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83 Suitable for models with 4 valve oil pump. Can also be used on 2 valve oil pumps as...
+

gkset9937
£43.95 (£52.74 inc VAT)
Triumph Unit 650cc - Universal Top End Decoke Gasket Set - All Models With 9 Stud Head Circa 1963-74 Engine gasket set containing the gaskets and 'O'...
+

gkset9939
£57.95 (£69.54 inc VAT)
Triumph Unit 650cc - Universal Engine Gasket Set - All Models With 9 Stud Head Circa 1963-74 Complete engine gasket set containing an extensive range of...
+

fkgk061
£11.95 (£14.34 inc VAT)
OEM: E7343, 70-7343, E3751, 70-3751, E1335, 70-1335, NA43, F1880, 82-1880
Triumph Rocker Box Gasket Set. Suit 3TA, T21, 5TA, T100A, 350/500cc 1957-66 For the earlier engine models Comprises of 3 Gaskets and 12 Washers OEM: E7343,...
+

filt027-B2
£6.95 (£8.34 inc VAT)
OEM: 70-6571
BSA A75 & Triumph T150, T160 (1965 on) Oil Filter Element Replacement oil filter element. OEM: 70-6571 Avaiable as standard or UK made - please...

clutch3203-B24
£3.45 (£4.14 inc VAT)
OEM: 42-3203, 57-1934, 57-0425, T425
BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

clutch3218-B24
£3.45 (£4.14 inc VAT)
OEM: 40-3218, 57-1927, T1927
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...
+

studset426-B14
£9.95 (£11.94 inc VAT)
OEM: 70-2980, E2980, 31-0222, 70-8012, 70-3302, 82-0879, F879
Triumph Rocker Box Stud and Nut Set - 650cc Unit Models Circa 1963-70 Rocker box to cylinder head - six studs, washers and nuts. Correct fitment on 650cc...
+

clutch3222-B23
£16.95 (£20.34 inc VAT)
OEM: 40-3222, 57-2728, T2728
Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...
+

seal1497
£1.25 (£1.50 inc VAT)
OEM: 70-1497, 70-3547, E1497, E3547
Triumph Push Rod Tube Top Seal - Fibre Type - 350/500/650cc Pre Unit and Early Unit Twins Fibre upper push rod joint washer as used on various models...
+

clutch0422-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0422, T422
Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...
+

kick1390-B4
£2.45 (£2.94 inc VAT)
OEM: 57-1390, T1390
Kickstart Stop Plate and Anchor Screw - Triumph T15, T20 + 350/500cc Unit Models Circa 1958-73 Correct fitment on Triumph T15 Terrier, T20 Tiger Cub,...
+

kick1157-B4
£1.95 (£2.34 inc VAT)
OEM: 57-1157, T1157, 40-0224, 40-224
Kickstart Stop Plate - Triumph T15, T20 + 350/500cc Unit Models Circa 1958-73 + BSA C15 and B40 Models Correct fitment on Triumph T15 Terrier, T20 Tiger...
+

fkgkch009
£2.45 (£2.94 inc VAT)
OEM: 90-0117
Primary Chaincase Gasket - BSA Bantam Suitable for BSA Bantam D1, D3, D7 OEM: 90-0117, 90-117
+

pist315-gan
£229.95 (£275.94 inc VAT)
OEM: CP164, CP 164
Pair of Gandini pistons for Triumph 3TA/T21 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.24mm...

bush3169-B8
£15.95 (£19.14 inc VAT)
OEM: 67-3169
BSA Kickstart Ratchet Pinion Bush - A, B and C Group Models Circa 1951-62 Correct fitment on plunger and swinging arm A7 and A10 models + swinging arm...
+

esprk3542-B9
£39.95 (£47.94 inc VAT)
OEM: 71-3542
Triumph 750cc Twin - Triplex Engine Primary Drive Sprocket - 29T Crankshaft motor sprocket for T140, TR7, TSS and TSX models circa 1973-83. See related...
+

kick2764-T
£119.95 (£143.94 inc VAT)
OEM: 57-2764
BSA Trials Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Wide Bend Heavy duty kickstart crank assembly for use on...
+

kick2764-S
£119.95 (£143.94 inc VAT)
OEM: 57-2764
BSA Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Standard Bend Heavy duty kickstart crank assembly for use on...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.