.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

wash8134
£0.15 (£0.18 inc VAT)
OEM: 70-8134, 36-0382, 01-4117, E8134
5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models Shakeproof serrated washer as used to secure bolts -...
+

seal1512
£2.95 (£3.54 inc VAT)
OEM: OEM: 57-1512, T1512
Triumph Kickstart Shaft Rubber Sleeve - Later Pre Unit and Early 650cc Twins - Circa 1958-63 Rubber oil seal tube - locates between the kickstart lever...
+

decokegks-D832
£19.95 (£23.94 inc VAT)
Triumph Decoke Gasket Set - 650cc Twins Circa 1971-72 Engine gasket set containing the gaskets and 'O' rings required for a top end rebuild on: TR6C,...
+

decokegks-D814
£21.95 (£26.34 inc VAT)
Triumph Decoke Gasket Set - 350/500cc Unit Twins Circa 1957-66 Engine gasket set containing the gaskets and 'O' rings required for a top end rebuild on:...
+

clip6869-B13
£1.45 (£1.74 inc VAT)
OEM: 70-6869, E6869, 67-0101, WE479, 40-0979
Triumph Piston Gudgeon Pin Circlips (2) - Pre Unit and Unit 500/650cc Models + Unit Singles Gudgeon wristpin circlip - correct fitment on: Pre unit and...
+

circlip2240-B13
£1.95 (£2.34 inc VAT)
OEM: 65-2240
BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63 Main bearing spring ring - drive end. Correct fitment on all B31, B33,...
+

nut8332-B13
£1.95 (£2.34 inc VAT)
OEM: 66-8332
BSA Oil Feed Pipe Gland Nut - B, C and M Group Models Circa 1940-62 Brass oil pipe nipple / union nut for 5/16" oil feed pipe - correct fitment on rigid...
+

wash7971
£0.75 (£0.90 inc VAT)
OEM: 29-7971, 82-9070, F9070
BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles Fibre washer locates between the oil tank filter and oil feed pipe/banjo....
+

seal289
£1.95 (£2.34 inc VAT)
OEM: 40-0679, 70-8153, E8153
BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...
+

nut997-B18
£5.45 (£6.54 inc VAT)
OEM: 67-1211
BSA Large Journal Crankshaft Sludge Trap Plug - A10, A50 and A65 Models  To fit large journal crankshafts as used on pre-unit A10 models from 1958-62 and...
+

pipe1547-B3
£13.45 (£16.14 inc VAT)
OEM: 65-1547, 65-1119
BSA Lower Rocker Oil Feed Pipe - Long Stroke A7, M33 + B Group Models Circa 1947-53 Correct fitment on long stroke A7, B31, B32, B33, B34 and M33 models...
+

pmp-gk2115
£1.45 (£1.74 inc VAT)
OEM: 71-2115, E12115, 41-0804, 71-1428, E11428, 70-8103, E8103
BSA/Triumph Oil Pump Gasket - Unit Singles From 1966 Onwards - 3 Bolt Fitting Oil pump gasket - correct fitment on unit singles including B25, B40, B44,...
+

pmp-gear0603-B18
£53.95 (£64.74 inc VAT)
OEM: 41-0603, 41-603, 70-8094, E8094
BSA/Triumph Oil Pump Drive Gear - Unit Singles From 1966 Onwards Oil pump spindle gear - correct fitment on unit singles: B25 and B50 models from 1969...
+

nut2228-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2228, E2228
Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...
+

fkrub1814
£1.95 (£2.34 inc VAT)
OEM: 82-1814, F1814
Triumph Embossed Kickstart Rubber - Closed End Type Suitable for all models except T20 Tiger Cub. Closed end type as generally used on pre unit and unit...
+

stud4088-B14
£3.95 (£4.74 inc VAT)
OEM: 68-4088
BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70 Locates at the front of the frame between the two down tubes - correct fitment on...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

clutch0375-B23
£6.95 (£8.34 inc VAT)
OEM: 68-0375, 68-375
BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade pivot pin - correct fitment on A50 and A65...
+

clutch0376-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0376, 68-376
BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade spacer - correct fitment on A50 and A65 models...
+

wash1670
£0.45 (£0.54 inc VAT)
OEM: 70-1670, E1670, 06-7542, 67-1499
Triumph/BSA/Norton Oil Pressure Release Valve Fibre Washer - All Valve Types Locates between the valve body and the timing cover / crankcase. Suitable for...
+

wash8754
£0.65 (£0.78 inc VAT)
OEM: 70-8754, E8754, GS254, 70-9738, E9738, NMT2057, NMT2058, 06-7541
Triumph/BSA/Norton Oil Pressure Release Valve Body Fibre Washer - All Valve Types Locates between the valve body, piston, spring and cap. Suitable for all...
+

wash1574-B13
£1.45 (£1.74 inc VAT)
OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103
Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...
+

stud0456-B18
£2.45 (£2.94 inc VAT)
OEM: 57-0456, T456
Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...
+

tapp1513A-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1513, E1513, 67-0056, 67-56
Triumph/BSA Mushroom Head Tappet Adjuster - Pre Unit + 650/750cc Unit Twins + A7 and A10 Models - 1946 On Rocker adjusting pin with mushroom head and hex...
+

screw1647-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1647, E1647
Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T,  5T, T100, TR5, 6T, T110, TR6...
+

gearbox2595-B13
£2.95 (£3.54 inc VAT)
OEM: 57-2595, T2595, NT261
Triumph Gearbox Camplate Roller - Pre Unit 350/500/650cc + Unit 650/750cc Models - Circa 1946-70 Gearbox camplate gear control / selector fork roller -...
+

screw7007-B13
£0.65 (£0.78 inc VAT)
OEM: 14-7007
Triumph 1/4" UNF - 1+1/4" Allen Head Cap Screw - 14-7007 As used on T140 and TR7 models - gearbox outer to inner cover, timing cover + 4 valve oil pump...
+

7-32-ball-F4
£0.25 (£0.30 inc VAT)
OEM: S70-7, 60-2363, D2363, 70-8019, E8019
7/32" Ball Bearing - Single Ball - Universal Use Diameter: 7/32" (5.6mm) As used in all standard dual or 4 valve oil pump assemblies on Triumph pre unit...
+

cover7318
£119.95 (£143.94 inc VAT)
OEM: 71-7318, E17318, 70-4567, E4567, 70-8797, E8797, 70-9246, E9246, 71-7042, E17042
Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81 Polished alloy timing cover compatible with either a 2 valve or 4 valve oil pump....
+

spring0403-B18
£0.45 (£0.54 inc VAT)
OEM: 70-0403, E403
Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards Locates within the screwed plugs in the bottom of the pump under the valve...
+

r/box3668-B4
£79.95 (£95.94 inc VAT)
OEM: 71-3668, E13668
Triumph Inlet Rocker Box - T140 / TR7 - 750cc Twins From 1974 Onwards Inlet side alloy rocker cover - correct fitment on T140 and TR7 models from 1974...
+

pmp7317-B13
£79.95 (£95.94 inc VAT)
OEM: 71-7317, E17317
Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards Complete four valve oil pump assembly with pump...
+

headgk021
£15.95 (£19.14 inc VAT)
OEM: 70-3614, E3614, 70-3614/080
Triumph Cylinder Head Gasket - Pre Unit 650cc Models - 8 Hole - Standard or Extra Thick Solid copper cylinder head gasket as fitted to 8 Stud  6T, T110,...

wash3302
£0.25 (£0.30 inc VAT)
OEM: 70-3302, E3302, 75-0214, 75-214, S21/91
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...
+

wash2184
£0.95 (£1.14 inc VAT)
OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213
Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses  As used extensively on various unit models - cylinder head bolts, frame parts + universal...
+

bolt2982-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2982, E2982
Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68 Correct fitment on pre unit TR5 and T100 models circa...
+

c/s-tube3903-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3903, E3903, 68-0185, 68-185
Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...
+

valv-sprs-CP102-B17
£18.95 (£22.74 inc VAT)
OEM: CP.102, CP102, 70-3001, 70-3002, E3001, E3002
Triumph Valve Spring Set - 650cc Pre Unit and Unit Models Circa 1959-65 - CP.102 White White spot inner and outer valve springs, 4 of each - correct...
+

rocker008B-B4
£14.95 (£17.94 inc VAT)
OEM: 70-3752, E3752, 70-4610, E4610, 71-2744, E12744
Triumph Hexagonal Head Rocker Box Inspection Cap - Unit 350/500/650cc Models - Circa 1959-74 Premium quality polished billet alloy rocker box inspection...
+

TP-3223-210
£4.95 (£5.94 inc VAT)
OEM: 70-3223, E3223
Triumph Tappet Adjuster - 350/500cc Unit Models - Circa 1959-74 - Various Options Rocker adjusting pin - correct fitment on unit 3TA, 5TA, T90 and T100...
 

bush0400-B8
£5.95 (£7.14 inc VAT)
OEM: 70-0400, E400
Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982 Correct fitment on all 350/500/650/750cc pre unit and unit twins...
+

clutch0420-B23
£3.45 (£4.14 inc VAT)
OEM: 57-0420, T420
Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52 Clutch to mainshaft plain nut washer as used on 3T, T85, 5T, TR5,...
+

bearing0011-F4
£3.45 (£4.14 inc VAT)
OEM: 90-0011, 90-11, 70-8151, E8151
BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles C10L and C12 4 speed models + Bantam D1, D3, D5, D7, D10, D14 and B175...
+

wash3300-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+

nut2922-B14
£1.95 (£2.34 inc VAT)
OEM: 70-2922, 70-1530, E2922, E1530
Conrod Big End Nut - Triumph Pre Unit and Unit 250/500/650cc Singles and Twins - Circa 1946-70 Self locking connecting rod nut - correct fitment on pre...
+

bolt6220-B14
£1.25 (£1.50 inc VAT)
OEM: 14-6220
5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220 As used on various Triumph models - crankcase clamping bolt on unit twins and triples circa...
+

spindle0375-B18
£7.45 (£8.94 inc VAT)
OEM: 70-0375, E375
Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982 Spindle for intermediate timing gear as fitted to all...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.