.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Miscellaneous

gk-pu001
£3.95 (£4.74 inc VAT)
Triumph Pre Unit Timing Case Cover Gasket - 500/650cc Models RH side timing case cover gasket. Supplied with dynamo section which can be removed if required.
+

seal1707
£3.95 (£4.74 inc VAT)
OEM: 71-1707, E11707
Triumph Push Rod Tube Collar / Sleeve - 500/650/750cc Twins From 1971 Onwards Zinc plates steel pushrod seal collar - locates between the tappet guide...
+

gk1562
£3.95 (£4.74 inc VAT)
OEM: 57-1562, T1562, 57-1217, T1217 - Gasket only, 57-1531
Triumph Gearbox Inner Cover Gasket - 350/500/650cc Pre Unit Models Circa 1950-62 Inner gearbox gasket - correct fitment on all pre unit models from 1950...
+

gk1534
£3.95 (£4.74 inc VAT)
OEM: 57-1534, T1534, 57-0935, T935, 57-0411, T411 - Gasket only
Triumph Gearbox Outer Cover Gasket - 350/500/650cc Pre Unit Models Circa 1946-62 Outer gearbox gasket - correct fitment on all pre unit models from 1946...
+

gkt0281
£3.45 (£4.14 inc VAT)
OEM: 67-0281, 67-281
BSA Inner Timing Cover Gasket - All A7 and A10 Models Circa 1949 Onwards Inner timing case joint washer as used on all A7 and A10 models. OEM: 67-0281,...
+

gkt0282
£2.95 (£3.54 inc VAT)
OEM: 67-0282, 10567-0282, 0282
BSA Timing Case Gasket 650cc etc BSA A7, A10 timing gasket. Gasket for right hand side of engine case, OEM: 67-0282
+

gkch724
£2.95 (£3.54 inc VAT)
OEM: 15-8814, 42-7504
Primary Chaincase back Felt Washer - BSA M20, M21, M33, A7, A10 etc BSA Felt washer that fits behind the clutch inside the chaincase OEM: 15-8814, 42-7504
+

fkgk124
£2.95 (£3.54 inc VAT)
OEM: 06-1092, 061092
Norton Commando/Dominator Timing Case Gasket - 06-1092 Norton Commando 750cc Norton twins, including Dominator 500/600/650cc Timing Cover gasket, right...
+

gk0256
£2.95 (£3.54 inc VAT)
OEM: 67-0256, 67-256
BSA Cylinder Base Gasket - All A7 and A10 Models From 1946 Onwards Cylinder barrel base washer - correct fitment on all A7 and A10 models. OEM:...
+

gk1433
£2.95 (£3.54 inc VAT)
OEM: 71-1433, 71-1036
BSA Cylinder Base Gasket - A65 / A50R Models From 1970 Onwards Cylinder barrel base gasket - correct fitment on later models with 3/8" studs. A65 models...
+

0.75mm-KS-gasket-paper
£2.75 (£3.30 inc VAT)
KS Gasket Material - 0.75mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet KS is a cost effective grade sealing material with very good...

0.5mm-KS-gasket-paper
£2.50 (£3.00 inc VAT)
KS Gasket Material - 0.5mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet KS is a cost effective grade sealing material with very good...

2.0mm-paper
£2.45 (£2.94 inc VAT)
Cellulose Paper Gasket Material - 2.0mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

wash5315-B13
£2.45 (£2.94 inc VAT)
OEM: 70-5315
Oil Sump Filter Gauze Copper Washer - Triumph 650cc + 750cc Unit Twins Copper washer to fit Oil Filter Gauze 650 and 750cc Triumph Models - T120, TR6,...
+

gk-1920
£2.45 (£2.94 inc VAT)
OEM: 66-1920
BSA Timing Case Outer Cover Gasket - B and M Group Models Circa 1939-63 Correct fitment on B31, B32, B33, B34, DBD34, M20, M21 and M33 models. OEM: 66-1920
+

gk2249
£2.45 (£2.94 inc VAT)
OEM: 70-2249, E2249
Triumph Cylinder Base Gasket - 500cc Pre Unit Models Circa 1946-59 Cylinder base washer -  correct fitment on pre unit TR5 and T100 models from 1946-59....
+

gkch1449
£2.45 (£2.94 inc VAT)
OEM: 71-1449, E11449, 57-3955, T3955
Triumph/BSA Triples Clutch inspection Cover Gasket - T150 Trident + A75 Models Four hole clutch inspection cover gasket - correct fitment on T150 and A75...
+

gk4316
£2.45 (£2.94 inc VAT)
OEM: 15-4316
BSA Clutch Cover Gasket - M20 and M21 Single Spring Clutch Models Clutch cover joint washer as used  on M20 and M21 models with an Empire Star type...
+

seal3540
£2.25 (£2.70 inc VAT)
OEM: 70-3540, E3540
Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67 Upper push rod tube oil joint washer as used on all T15 and T20 models from 1954...
+

gk509
£1.99 (£2.39 inc VAT)
OEM: 42-7509
BSA A7, A10 Inner Chaincase Gasket - 42-7509 BSA Chaincase inner gasket. 500/650cc twins Gasket between the engine and primary chaincase. OEM: 42-7509
+

fkgk853
£1.95 (£2.34 inc VAT)
OEM: 70-6309, E6309
Triumph Cylinder Base Gasket - 650/750cc Twins From 1966 Onwards Cylinder base washer -  correct fitment on T120 and TR6 models circa 1966-72. Also used...
+

fkgk437
£1.95 (£2.34 inc VAT)
OEM: 71-7263
Triumph Timing case gasket Triumph 650/750 Unit Twins OEM 71-7263
+

seal7196
£1.95 (£2.34 inc VAT)
OEM: 71-7196
Push rod tube collar for Triumph T140 Late Models Made In England OEM: 71-7196
+

1.6mm-paper
£1.95 (£2.34 inc VAT)
Cellulose Paper Gasket Material - 1.6mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

gask0487
£1.95 (£2.34 inc VAT)
OEM: 70-0487
Triumph Sump Gasket - Pre-unit - 70-0487 Single gasket for the Pre-unit Triumph, to use when removing the sump to clear out all the broken bits!!! OEM:...
+

gask837
£1.95 (£2.34 inc VAT)
Triumph Timing Case Gasket 350/500cc Twin Triumph 500cc Unit Twins, 5TA, T100 etc Triumph 350cc Unit Twins, 3TA, T90 etc
+

gk0241
£1.95 (£2.34 inc VAT)
OEM: 40-0241, 40-241
BSA Primary Case Back Plate Gasket - BSA C15, B25, B40, A50 & A65 Models Fits between the crankcase and the primary case back cover. OEM: 40-0241,...
+

gask1444
£1.95 (£2.34 inc VAT)
OEM: 71-1444, 70-6516, E11444, E6516
Triumph/BSA Triples - Sump Gasket - A75 Rocket 3 + T150, T160 Trident Models Sump filter gasket for all BSA and Triumph triples from 1969-75. OEM:...
+

pumpgkt2296
£1.95 (£2.34 inc VAT)
OEM: 71-2296, 68-0939, 68-939, 68-0293, 86-293
BSA Oil Pump Gasket - A50 and A65 Models Circa 1963-73 Correct fitment on 500/650cc unit twins. Made in England OEM: 71-2296, 68-0939, 68-939, 68-0293,...
+

gk2894
£1.95 (£2.34 inc VAT)
OEM: 70-2894, E2894
Triumph Cylinder Base Gasket - 500/650cc Pre Unit + 650cc Unit Models Circa 1950-65 Cylinder base washer -  correct fitment on pre unit T110, 6T, T120...
+

gk3798
£1.95 (£2.34 inc VAT)
OEM: 70-3798, E3798
Triumph Cylinder Base Gasket - Unit 350/500cc Models Circa 1957-74 Cylinder base washer - correct fitment on all unit 3TA, 5TA, T90, T100 and TR5T...
+

gk4037
£1.95 (£2.34 inc VAT)
OEM: 70-4037, E4037
Triumph Cylinder Base Gasket - T20 Tiger Cub Models Circa 1959-67 Cylinder base washer - correct fitment on all T20 Tiger Cub models from 1959 onwards....
+

pmp-gk2618
£1.95 (£2.34 inc VAT)
OEM: 65-2618
BSA Oil Pump Gasket - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Fibre oil pump joint washer for use with the round type pump as fitted...
+

seal3391
£1.95 (£2.34 inc VAT)
OEM: 70-3391, E3391, 40-0180, 40-180
Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67 Lower push rod tube oil joint washer as used on all T15 and T20 models...
+

gkch542
£1.65 (£1.98 inc VAT)
OEM: 66-7575
Primary Chaincase to Crankcase Gasket - BSA M20, M21, M33 etc Chaincase and Crankcase Joint Washer OEM: 66-7575
+

gk396
£1.55
OEM: 19-1429, LU200380
BSA Dynamo Gasket - Cork - 19-1429, LU200380 Cork gasket between dynamo and timing gear case OEM: 19-1429, LU200380
+

fkgk426
£1.45 (£1.74 inc VAT)
OEM: 83-2829
Triumph T140 Sump Gasket NOTE: You will require 2 of these for one bike, as there is a gasket each side of the gauze filter. OEM 83-2829
+

fkgk843
£1.45 (£1.74 inc VAT)
OEM: 71-1424, 67-1288, E8070, 70-8070
Triumph / BSA Sump Plate Gasket - A, B Group Models + Triumph 250cc Models BSA A7, A10, A50, A65, B25, C25 and B44 models circa 1949-63 + Triumph...
+

gask2612
£1.45 (£1.74 inc VAT)
OEM: 65-2612
BSA Crankcase Sump Scavenger Gasket - 65-2612 Used on BSA B and M models, such as B31, B33, M20, M21 etc OEM: 65-2612
+

seal542
£1.45 (£1.74 inc VAT)
OEM: 70-1496, E1496
Triumph Bottom Push Rod Tube O Ring Seal - 70-1496 Bottom joint washer for various pre unit and unit 650cc twins. OD: 1+1/4" (31.4mm) ID: 15/16"...
+

gk3345
£1.45 (£1.74 inc VAT)
OEM: 70-3345, 70-4872, E3345, E4872
Triumph T20 Tiger Cub Right Hand Timing Case Outer Cover Gasket RH side timing case outer cover gasket correct fitment on T15 and T20 models from 1954...
+

pumpgkt1393
£1.45 (£1.74 inc VAT)
OEM: 67-1393
BSA Oil Pump Gasket - A7 and A10 Models Circa 1949-63 Correct fitment on 500/650cc pre unit twins. Made in England OEM: 67-1393
+

sumpgkt0111
£1.45 (£1.74 inc VAT)
OEM: 40-0111, 40-111
BSA Sump Plate Gasket - C15 and B40 Models Circa 1959-65 Usually two gaskets required, one each side of the gauze filter. Made in England OEM:...
+

gk-3033
£1.45 (£1.74 inc VAT)
OEM: 67-3033, 64-3106
BSA Gearbox Outer Cover Inspection Cover Gasket - A, B and C Group Models Circa 1948-62 Correct fitment on A7 and A10 plunger and swinging arm models from...
+

gk-3449
£1.45 (£1.74 inc VAT)
OEM: 29-3449
BSA Gearbox Inspection Cover Gasket - A, B Swinging Arm and 4 Speed C Group - Circa 1954-62 Correct fitment on A7, A10, B31, B32, B33, B34 swinging arm...
+

gk1477
£1.45 (£1.74 inc VAT)
OEM: 57-1477, T1477
Triumph Inner Primary Chaincase to Crankcase Gasket - Pre Unit 500/650cc Models Circa 1957-62 Correct fitment on 5T, T100, 6T, T120 and TR6 models from...
+

pmp-gk2115
£1.45 (£1.74 inc VAT)
OEM: 71-2115, E12115, 41-0804, 71-1428, E11428, 70-8103, E8103
BSA/Triumph Oil Pump Gasket - Unit Singles From 1966 Onwards - 3 Bolt Fitting Oil pump gasket - correct fitment on unit singles including B25, B40, B44,...
+

gask0589
£1.45 (£1.74 inc VAT)
OEM: 68-0589, 68-589
BSA Tacho Drive Adapter / Nipple Gasket - A50 and A65 Models Circa 1964-72 Rev counter drive nipple washer - locates behind the alloy tachometer drive...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.