.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Push Rods + Tubes

seal237
£1.25 (£1.50 inc VAT)
OEM: 70-4752, E4752
Push rod cover tube square section seal for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Square Section Seal OEM: 70-4752, E4752
+

seal541
£1.25 (£1.50 inc VAT)
OEM: 70-3547, E3547
White silicone push rod 'O' ring Suit some of the 650cc engines Fits the 3TA, 5TA, T100 and other 350/500cc unit engines. Square section o-ring seal OEM:...
+

tapp731
£0.55 (£0.66 inc VAT)
OEM: 70-8782, 70-7563, E8782, E7563
Triumph Tappet Guide Block O Ring - 500/650/750cc Models  OD: 1" (25.4mm) ID: 7/8" (22.3mm) Thickness: 1/6" (1.9mm) Viton Rubber OEM:  70-8782,...
+

seal538
£1.25 (£1.50 inc VAT)
OEM: 70-7310, E7310
Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Also suits some of the later 350/500cc engines (confused? -...
+

seal537
£1.25 (£1.50 inc VAT)
OEM: 71-1283
Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines O - ring OEM: 71-1283
+

seal542
£1.45 (£1.74 inc VAT)
OEM: 70-1496, E1496
Triumph Bottom Push Rod Tube O Ring Seal - 70-1496 Bottom joint washer for various pre unit and unit 650cc twins. OD: 1+1/4" (31.4mm) ID: 15/16"...
+

rod2620-B17
£10.95 (£13.14 inc VAT)
OEM: 70-2620
Triumph Push Rod - 500/650cc Pre Unit and 650cc Unit Models From 1939-73 Correct fitment for all pre-unit Triumph 500/650cc models 5T, T100, 6T, T110,...
+

tapp0200H-B18
£2.45 (£2.94 inc VAT)
OEM: 97-0200, H200
Triumph Tappet Guide Block Set Bolt - 350/500/650/750cc Models Pre-unit and unit models including 3TA, 5T, 6T, TR5, 5TA, T100, T110, T120, T140. OEM:...
+

rod4008-B17
£3.95 (£4.74 inc VAT)
OEM: 70-4008
Triumph T100/5TA Engine Pushrod As fitted to all 500cc Unit construction Twins (1958-74) Length approx 120-125mm Made in England by LF Harris OEM:...

seal1707
£3.95 (£4.74 inc VAT)
OEM: 71-1707, E11707
Triumph Push Rod Tube Collar / Sleeve - 500/650/750cc Twins From 1971 Onwards Zinc plates steel pushrod seal collar - locates between the tappet guide...
+

seal1497
£1.25 (£1.50 inc VAT)
OEM: 70-1497, 70-3547, E1497, E3547
Triumph Push Rod Tube Top Seal - Fibre Type - 350/500/650cc Pre Unit and Early Unit Twins Fibre upper push rod joint washer as used on various models...
+

push4746
£1.05 (£1.26 inc VAT)
OEM: 70-4746
Triumph Push Rod Steel Washer Steel cup, T90, T100, T120, T140, T150 OEM:  70-4746
+

tapp9352-B13
£21.95 (£26.34 inc VAT)
OEM: 70-9352
Triumph 500cc, 650cc, 750cc, T100, T120, T140 inlet tappet guide block. OEM: 70-9352
+

seal3758
£1.25 (£1.50 inc VAT)
OEM: 70-3758, E3758
Triumph Push Rod Seal - Bottom To fit 5TA, 3TA, T100A models from 1957-1963 OEM 70-3758, E3758
+

seal3391
£1.95 (£2.34 inc VAT)
OEM: 70-3391, E3391, 40-0180, 40-180
Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67 Lower push rod tube oil joint washer as used on all T15 and T20 models...
+

tapp9353-B13
£29.95 £19.95 (£23.94 inc VAT)
OEM: 70-9353
Triumph 500cc, 650cc, 750cc, T100, T120, T140 exhaust tappet guide block. OEM: 70-9353
+

seal3540
£2.25 (£2.70 inc VAT)
OEM: 70-3540, E3540
Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67 Upper push rod tube oil joint washer as used on all T15 and T20 models from 1954...
+

tapp508H-B18
£21.95 (£26.34 inc VAT)
OEM: 70-4676, E4676
Triumph Inlet Tappet Guide Block - 350/500/650cc Models - Circa 1966 Inlet tappet block for the cam followers. Triumph 650cc models T120, TR6 circa...
+

rod191-B17
£15.95 (£19.14 inc VAT)
OEM: 70-4751, 70-4751A, E4751
Triumph Pushrod Tube - T90 and T100, 350/500cc Unit Models - Billet Alloy 70-4751 UK Made Billet Alloy push rod tube Triumph T90/T100 (1964-68) These...
+

tappet-1477-B13
£18.95 (£22.74 inc VAT)
OEM: 70-1477, E1477
Triumph Tappet Guide Block - 500/650cc Pre Unit and 650cc Early Unit Models Tappet block for the cam followers, suitable for the following models: Early...
+

rod3372-B17
£6.95 (£8.34 inc VAT)
OEM: 70-3372, E3372
Triumph Engine Push Rod - T15 Terrier and Tiger Cub T20 Models - 1954 Onwards Length: 6+1/2" (165mm) Premium Quality - Made in England OEM: 70-3372,...
+

rod1505-B17
£18.95 (£22.74 inc VAT)
OEM: 70-1505, E1505
Triumph Pushrod Tube - Pre Unit Iron Head Models - Circa 1938-62 Push rod tube, with oil drain hole. Fits pre-unit 5T, T100, 6T, T110, T120 models with...

pushrod-set-0360-B17
£34.95 (£41.94 inc VAT)
OEM: 67-0360, 67-0362
BSA motorcycle A10 Push-rod SET Set of 4 push rods for the 650cc A10 BSA Pushrod, Push rod, Push-rod. 2 inlet and 2 exhaust OEM: 67-0360, 67-0362
+

seal7196
£1.95 (£2.34 inc VAT)
OEM: 71-7196
Push rod tube collar for Triumph T140 Late Models Made In England OEM: 71-7196
+

tapp5861-B13
£19.95 (£23.94 inc VAT)
OEM: 70-5861, E5861
Triumph Exhaust Tappet Guide Block - 650cc Models - T120, TR6 Circa 1965-68 Exhaust tappet block for the cam followers. Triumph 650cc models T120, TR6...
+

tapp3736-B13
£17.95 (£21.54 inc VAT)
OEM: 70-3736, E3736
Triumph Tappet Guide Block - Early Unit 350/500cc Models - Circa 1958-63 Tappet guide block used for both inlet and exhaust on early unit 3TA, 5TA and...
+

tappet-GS36-B18
£22.95 (£27.54 inc VAT)
OEM: 70-1477, E1477
Triumph Alloy Tappet Guide Block - 500cc Pre Unit T100 and TR5 Models - Circa 1952-59 Tappet block for the cam followers, suitable for the following...
+

rod194W
£21.95 (£26.34 inc VAT)
OEM: 70-9349, E9349, 71-2575, E12575
Triumph Push Rod Cover Tube - Later OIF 650cc Models Circa 1969-72 Correct fitment on T120R, TR6R, TR6C models from 1969 onwards. Push rods and...
 

rod7191-B17
£19.95 (£23.94 inc VAT)
OEM: 71-7191
Triumph Pushrod Tube - T140 - Late Models - Chrome Plated Push rod cover tube. Chrome plated - made In England OEM: 71-7191
+

rod6000-B17
£18.95 (£22.74 inc VAT)
OEM: 70-6000
Triumph Pushrod Cover Tube - 6T, TR6, T120 Bonneville - 1965-67 Height from bottom of tube to top flange is 4+5/8" Chrome plated OEM: 70-6000
+

rod3329-B17
£18.95 (£22.74 inc VAT)
OEM: 71-3329, E13329
Triumph 750cc Twin Pushrod Tube - T140, TR7 Models Circa 1973-78 Correct fitment on earlier 750cc twins from 1973-78. Chrome plated - made in England....
+

rod127-B17
£6.45 (£7.74 inc VAT)
OEM: 70-3759
Triumph 3TA and T90 Engine Push Rod - OEM: 70-3759 Length 120mm Made in England OEM: 70-3759
+

rod3755-CP-B17
£19.95 (£23.94 inc VAT)
OEM: 70-3755, E3755
Triumph Pushrod Tube - Early Unit 350/500cc Models - Circa 1958-63 Stepped type as used on earlier 3TA, 5TA and T100 models circa 1958-63. Available...
 

pushrod-set-0396-B17
£31.95 (£38.34 inc VAT)
OEM: 67-0396, 67-0398
BSA motorcycle A7 Push-rod SET Set of 4 push rods for the 500cc A7 BSA Pushrod, Push rod, Push-rod. 2 inlet and 2 exhaust OEM: 67-0396, 67-0398
+

rod063P
£4.95 (£5.94 inc VAT)
OEM: 71-3330
Triumph T140, TR7 - 750cc Engine Pushrod Pushrod, Push rod, Push-rod. Length 152mm Available as standard or UK made - please select option. OEM:...
 

rod214-B17
£12.45 (£14.94 inc VAT)
OEM: 68-0372
BSA motorcycle A65 Exhaust Push-rod Pushrod, Push rod, Push-rod. Length 195mm OEM: 68-0372
+

rod215-B17
£12.45 (£14.94 inc VAT)
OEM: 68-0370
BSA motorcycle A65 Inlet Push-rod Pushrod, Push rod, Push-rod. Length 163mm OEM: 68-0370
+

rod197-B17
£19.95 (£23.94 inc VAT)
OEM: 71-7179
Triumph Pushrod Tube - T140, TR7 from 1979-82 UK Made from Billet Alloy OEM: 71-7179
+

rod0365-B17
£9.95 (£11.94 inc VAT)
OEM: 68-0365, 68-365
BSA A50 Inlet Pushrod - All Models Circa 1962-70 Inlet pushrod - correct fitment on all A50 models including Royal Star models to 1970. Length: 6+1/4"...
+

rod0367-B17
£9.95 (£11.94 inc VAT)
OEM: 68-0367, 68-367
BSA A50 Exhaust Pushrod - All Models Circa 1962-70 Exhaust pushrod - correct fitment on all A50 models including Royal Star models to 1970. Length:...
+

tapp7195-B13
£22.95 (£27.54 inc VAT)
OEM: 70-7195
Triumph T140 Exhaust Tappet Guide Block, with oil feed Made In England Late Models T140 OEM: 70-7195
+

tapp6508
£29.95 (£35.94 inc VAT)
OEM: 70-6508, E6508, 71-3212, E13212
Triumph Drive Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Single Hole Left hand / drive side single hole alloy tappet guide block for...
+

tapp6509
£29.95 (£35.94 inc VAT)
OEM: 70-6509, E6509, 71-3211, E13211
Triumph Timing Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Two Hole Right hand / timing side twin hole alloy tappet guide block for...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.