.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

stub4791
£2.45 (£2.94 inc VAT)
OEM: 70-4791, E4791
Triumph - Inlet Manifold Balance Pipe Stub Connector - 650cc models from 1963-68 CEI thread. Polished stainless steel. Made in England using the...
+

bolt1601-B13
£3.45 (£4.14 inc VAT)
OEM: 70-1601, E1601
Triumph Rocker Oil Feed Banjo Adaptor Bolt - Pre-Unit Twins Correct fitment on many 500/650cc pre-unit twins from 1947 onwards Length UH: 3/4" (18.9mm)...
+

pist0630
£139.95 (£167.94 inc VAT)
OEM: 40-0630, 40-0632, 40-0634, 40-630, 40-632, 40-634
Gandini/GPM Piston - BSA C15 / BSA C25 - Circa 1959-67 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 1/16" Piston rings - 1st...

TP-3223-210
£4.95 (£5.94 inc VAT)
OEM: 70-3223, E3223
Triumph Tappet Adjuster - 350/500cc Unit Models - Circa 1959-74 - Various Options Rocker adjusting pin - correct fitment on unit 3TA, 5TA, T90 and T100...
 

clip0954x2-B13
£1.95 (£2.34 inc VAT)
OEM: 66-0954, 66-954, 71-3185, 71-3700, 71-2970
BSA Triumph Piston Gudgeon Pin Circlips - G Shaped With Tangs 2 x piston wrist pin circlips suitable for a wide range of BSA models including: A10, C12,...
+

pipe848-B3
£39.95 (£47.94 inc VAT)
OEM: 42-8344, 42-8345
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (under gearbox routing) Comes as 2 pipes, approx 20" and 21" long, ready to fit. These route...
+

vvg402
£99.95 (£119.94 inc VAT)
OEM: 68-0809, 68-0665, 68-0663
BSA A65 (1966-69) Models Complete Valve Guide set. Includes bronze guides, and valves. Valve Guides : Set of 4 Bronze Guides (68-0809) Valves : Set of 4...
+

9914-W
£8.95 (£10.74 inc VAT)
OEM: 70-9914, E9914
Conrod Big End Bolt - Triumph 500/750cc Unit Twins + Triumph/BSA 250cc Unit Singles Connecting rod bolts as fitted to  T100, TR5T models circa 1971-74...
 

valve050-B22
£16.95 (£20.34 inc VAT)
OEM: 40-0166, V170
BSA Exhaust Valve C15, C15S, C15T from 1959-65 - 40-0166 Head Diameter: 1.312 Stem Diameter: 0.3100 Length: 3.525 Alpha guide number V170 OEM:...
+

bolt113-B19
£3.95 (£4.74 inc VAT)
OEM: 70-4456
Triumph T90/T100 Cylinder head bolt (outer with extended hexagon). High Tensile 3/8" x 2-3/4" 26TPI bolts. OEM: 70-4456
+

piston7086
£92.95 (£111.54 inc VAT)
OEM: 71-7086
Harris Pistons for Triumph T140, TR7T 750cc - 71-7086 For low compression 750cc, perfect for Unleaded Fuel use. Pair of high quality pistons, Made in...

valve013-B22
£16.95 (£20.34 inc VAT)
OEM: E2969, 70-2969
Triumph 500cc Inlet Valve - 70-2969 Triumph T100, TR5 (1951-59) 500cc Inlet Valve (Alpha valve no.V25) Head Diameter: 1.437 Stem Diameter: 0.3105 Length:...
+

nut327-B4
£1.95 (£2.34 inc VAT)
OEM: 65-2153
BSA Rocker Inspection Cap Nut - 65-2153 Suits BSA A7 500cc and BSA A10 650cc and some other models OEM: 65-2153
+

valve0236-B22
£33.95 (£40.74 inc VAT)
OEM: 66-0236
BSA M20, M21 Exhaust Valve Alpha valve number V20 Made in England OEM: 66-0236
+

seal3616
£0.95 (£1.14 inc VAT)
OEM: 60-3616, D3616
Triumph/BSA Oil Filler Cap O Ring - Unit Models from 1971-83 O Ring Seal to fit oil filler cap on Triumph/BSA OIF models from 1971 on OD: 1+1/4" (32mm)...
+

guide177-B22
£9.95 (£11.94 inc VAT)
OEM: 41-0632, 41-0633, G510PB
BSA Inlet/Exhaust Valve Guide B44 Victor (Square Barrel) 1967-69 - 41-0632/3, 71-1626 This is also the correct inlet valve guide for B50 models Length:...
+

valve104-B22
£16.95 (£20.34 inc VAT)
OEM: 68-0662, V256
BSA Exhaust Valve B25, A50  from 1966-70 - 68-0662 Head Diameter: 1+5/16", 1.31 (33.4mm) Stem Diameter: 5/16", 0.31 (7.8mm) Length: 3+11/16", 3.68...
+

bolt1545-B19
£2.95 (£3.54 inc VAT)
OEM: 70-1545, E1545
Triumph Rocker Box Corner Bolt - Pre Unit Iron Head 500/650cc Models Circa 1946-62 Rocker box to cylinder head bolt, correct fitment on 5T, 6T, TR6 and...
+

piston3610
£89.95 (£107.94 inc VAT)
OEM: 70-3610, 70-3610/20, 70-3610/40, 70-3610/60, E3610, E3610/20, E3610/40, E3610/60, CP157
Harris Pistons for Pre-Unit Triumph T110 650cc - 70-3610 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin,...

valve110-B22
£16.95 (£20.34 inc VAT)
OEM: E6854, 70-6854
Triumph 500cc Exhaust Valve - 70-6854 Triumph T100, TR5T (1970-73) T100, T100C, T100S, T100T (1967-70) Exhaust Valve (Alpha valve no.V266) Head Diameter:...
+

valv229-B17
£32.95 (£39.54 inc VAT)
OEM: VS466
Valve Spring Set - Triumph Tiger Cub T20/T15 Standard. (Original Terry No. VS466) Includes 2 outer springs and 2 inner springs. OEM: VS466 Made in England
+

vguide201-B22
£10.95 (£13.14 inc VAT)
OEM: 71-3294, E13294, E3294
Triumph T140 Bonneville, TR7 Inlet Valve Guide (1973-78) One Valve Guide Available as Standard, +.002 oversize, +.004 oversize and +.006. +.015, +.025...

inlet9550
£49.95 £39.95 (£47.94 inc VAT)
OEM: 70-9550, E9550
Triumph - Left Side Inlet Manifold  - T120R, TR6R, TR6C - 1969-72 For use with a 900 concentric Amal carburettor Correct threaded hole for the breather...
+

inlet9551
£49.95 £39.95 (£47.94 inc VAT)
OEM: 70-9551, E9551
Triumph - Right Side Inlet Manifold  - T120R, TR6R, TR6C - 1969-72 For use with a 900 concentric Amal carburettor Correct threaded hole for the breather...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.