.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

bolts1540-B19
£2.25 (£2.70 inc VAT)
OEM: 70-1540
Triumph Rocker Box Stud - Fits Rocker Box and Pre Unit Sump Plate Coarse thread to screw into the rocker box, and fine thread for the nut. OEM: 70-1540
+

bolts2980t-B19
£2.25 (£2.70 inc VAT)
OEM: 70-2980, E2980
Triumph Rocker Box Stud - 70-2980 Coarse thread to screw into the rocker box, and fine thread for the nut. OEM: 70-2980, E2980
+

seal3540
£2.25 (£2.70 inc VAT)
OEM: 70-3540, E3540
Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67 Upper push rod tube oil joint washer as used on all T15 and T20 models from 1954...
+

tapp0200H-B18
£2.45 (£2.94 inc VAT)
OEM: 97-0200, H200
Triumph Tappet Guide Block Set Bolt - 350/500/650/750cc Models Pre-unit and unit models including 3TA, 5T, 6T, TR5, 5TA, T100, T110, T120, T140. OEM:...
+

stud3880-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3880
Triumph - Inlet Manifold Stud - 350/500cc 3TA, 5TA, T100 Length: 1+1/4" (32mm) long with CEI / BSF threads OEM: 70-3880
+

dip7245-B4
£2.45 (£2.94 inc VAT)
OEM: 83-7245, F7245
Triumph/BSA Oil Filler Cap Replacement Dipstick - Unit Models from 1971-83 Replacement dipstick - clips into oil filler cap Overall Length: 5+1/4"...
+

stub4791
£2.45 (£2.94 inc VAT)
OEM: 70-4791, E4791
Triumph - Inlet Manifold Balance Pipe Stub Connector - 650cc models from 1963-68 CEI thread. Polished stainless steel. Made in England using the...
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

stud2973-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2973, E2973
Triumph Inlet Manifold Stud - Single Carb Pre Unit 500/650cc Twins + Unit 650cc Models Short inlet manifold to cylinder head stud. Correct fitment on...
+

bolt2982-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2982, E2982
Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68 Correct fitment on pre unit TR5 and T100 models circa...
+

bolt044-B19
£2.90 (£3.48 inc VAT)
OEM: 70-7996
Triumph cylinder head stud OEM: 70-7996
+

nut066M-B14
£2.95 (£3.54 inc VAT)
OEM: 67-1537
BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537
+

bolt762-B19
£2.95 (£3.54 inc VAT)
OEM: 70-4771
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (centre 5/16" bolt) OEM: 70-4771
+

pistring3691
£2.95 (£3.54 inc VAT)
OEM: E3691, 70-3691
Harris Piston Ring for Triumph 350cc - 70-3691 Supplied as ONE single Piston Ring. Plain Compression Piston Ring. Suit Triumph 3TA Bore Size : 58.24mm...

pistring3692
£2.95 (£3.54 inc VAT)
OEM: E3692, 70-3692
Harris Piston Ring for Triumph 350cc - 70-3692 Supplied as ONE single Piston Ring. Oil Control Piston Ring. Suit Triumph 3TA and T90 Bore Size : 58.24mm...

bolt0984-B18
£2.95 (£3.54 inc VAT)
OEM: 70-0984, E984
Triumph Rocker Oil Return Banjo Adaptor Bolt - Pre-Unit Twins Correct fitment on many 500/650cc pre-unit twins from 1947 onwards Only models fitted with...
+

bolt2767-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2767, E2767
Triumph Rocker Drain Banjo Adaptor Bolt - 500cc Pre-Unit Twins From 1947-59 Correct fitment on 500cc pre-unit twins from 1947-59 Length UH: 3/4"...
+

bolt2603-E2
£2.95 (£3.54 inc VAT)
OEM: 82-2603, F2603
Triumph Side Stand Bolt / Manifold Carb Mounting Bolt - Reduced Head Reduced hex head bolt - correct fitment to mount the prop stand on pre unit models...
+

bolt1545-B19
£2.95 (£3.54 inc VAT)
OEM: 70-1545, E1545
Triumph Rocker Box Corner Bolt - Pre Unit Iron Head 500/650cc Models Circa 1946-62 Rocker box to cylinder head bolt, correct fitment on 5T, 6T, TR6 and...
+

tapp7045-B13
£2.95 (£3.54 inc VAT)
OEM: 71-7045, E17045
Triumph Tappet Adjuster - T140 and TR7 Models From 1978 Onwards - UNF Thread Rocker adjusting pin with allen key adjustment. Correct fitment on later T140...
+

nut0550-B18
£2.95 (£3.54 inc VAT)
OEM: 21-0550, S550
Triumph Rocker Oil Feed Dome Nut - 750cc Twins and Triples From 1969 Onwards Chrome plated rocker spindle / oil feed pipe domed acorn nut - correct...
+

stud2813
£3.25 (£3.90 inc VAT)
OEM: 71-2813, E12813
Triumph - Inlet Manifold Stud - 650/750cc Unit Twins - 1972-78 Suitable for 650/750cc Unit Twins from 1972-78 with bolt-on inlet manifolds Overall...
+

bolt553-B18
£3.45 (£4.14 inc VAT)
OEM: 65-0317
BSA A7, A10 Rocker spindle oil feed bolt OEM: 65-0317

bolt716-B19
£3.45 (£4.14 inc VAT)
OEM: 70-0327
Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt) OEM: 70-0327
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.