.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

plug5343-B13
£1.95 (£2.34 inc VAT)
OEM: 82-5343, F5343
Triumph Oil Tank Drain Plug - Unit Pre OIF Twins and Triples From 1963 Onwards Oil tank drain plug as used on pre OIF unit T100, T120, TR6, T150 models....
+

smallend285-B8
£4.95 (£5.94 inc VAT)
OEM: 67-0298, SE109
BSA Small End Bearing - 67-0298 A10, A10SR, A10RR, A50, A65 (1950-71) OEM: 67-0298, SE109
+

bolts284-B14
£9.95 (£11.94 inc VAT)
OEM: 42-0062, 15-1355
Rocker Bolt Set BSA A7/A10 BSF 22TPI. This set includes 4 X 5/16" BZP Plated High tensile bolts for fixing head steady brackets to rocker box/cylinder head....
+

inlet5350
£27.95 (£33.54 inc VAT)
OEM: 70-5350, E5350
Triumph - Right Side Inlet Manifold  - Threaded type - 650cc models from 1963-68 Correct threaded hole for the breather balance pipe. CEI thread. Thread:...
+

valve009-B22
£16.95 (£20.34 inc VAT)
OEM: 01-3986
AJS 16, Matchless G3 - Exhaust Valve - 01-3986 AJS 16, 16M, 16MC, 16MCS, 350cc Single Matchless G3L, G3LS, G3LCS, 350cc Single (Alpha valve no. V22)...
+

pist285-G
£139.95 (£167.94 inc VAT)
OEM: 41-0793, 41-0797, 41-0797A, 41-0797B
BSA B44 Piston - Gandini - Slipper type GPM - for BSA B44 441cc One Slipper Piston for BSA B44 441cc models etc (1967-69). Supplied as 1 Piston, complete...

valve046-B22
£16.95 (£20.34 inc VAT)
OEM: E3927, 70-3927
Triumph 650cc Exhaust Valve - 70-3927 TR6, 6T, T110, Thunderbird (1958-66) T120 Bonneville (1959-63) Exhaust Valve (Alpha valve no.V138) Head Diameter:...
+

valv218-B17
£15.95 (£19.14 inc VAT)
OEM: 68-0475, 68-0805, 68-475, 68-805
Valve Spring Set - BSA A50, A65 (1962-1966) Includes 4 outer springs and 4 inner springs. Made in England. OEM: 68-0475, 68-0805, 68-475, 68-805
+

tapp7195-B13
£22.95 (£27.54 inc VAT)
OEM: 70-7195
Triumph T140 Exhaust Tappet Guide Block, with oil feed Made In England Late Models T140 OEM: 70-7195
+

rod194W
£21.95 (£26.34 inc VAT)
OEM: 70-9349, E9349, 71-2575, E12575
Triumph Push Rod Cover Tube - Later OIF 650cc Models Circa 1969-72 Correct fitment on T120R, TR6R, TR6C models from 1969 onwards. Push rods and...
 

stub4791
£2.45 (£2.94 inc VAT)
OEM: 70-4791, E4791
Triumph - Inlet Manifold Balance Pipe Stub Connector - 650cc models from 1963-68 CEI thread. Polished stainless steel. Made in England using the...
+

guide176-B22
£9.45 (£11.34 inc VAT)
OEM: 41-0017, 41-17, G510
BSA Inlet/Exhaust Valve Guide B40, 350 Star, SS90 and B44 Round Barrel from 1965-66 - 41-0017 Length: 1+7/8", 1.87 (47.5mm) Diameter: 1/2", 0.5 (12.7mm)...
+

pist241
£219.95 (£263.94 inc VAT)
Pair of JP Piston for AJS 20 500cc or Matchless G9 500cc 1956-1959 Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 66mm...

valve005-B22
£16.95 (£20.34 inc VAT)
OEM: 67-0395, 67-0741, 67-395, 67-741, V16
BSA Exhaust Valve 500cc A7 Models from 1951-62 - 67-0395 Head Diameter: 1+9/32", 1.28 (32.6mm) Stem Diameter: 5/16", 0.31 (7.8mm) Length: 3+29/32", 3.92...
+

vguide201-B22
£10.95 (£13.14 inc VAT)
OEM: 71-3294, E13294, E3294
Triumph T140 Bonneville, TR7 Inlet Valve Guide (1973-78) One Valve Guide Available as Standard, +.002 oversize, +.004 oversize and +.006. +.015, +.025...

vguide195b-B22
£9.95 (£11.94 inc VAT)
OEM: 71-1627, G539PB
BSA Inlet/Exhaust Valve Guide B25 + B50 Exhaust Valve Guide Only - 71-1627 Length: 1+27/32", 1.84 (46.7mm) Diameter: 1/2", 0.5 (12.7mm) ID: 5/16", 0.31...
+

valve058-B22
£16.95 (£20.34 inc VAT)
OEM: E4013, 70-4013
Triumph 500cc Exhaust Valve - 70-4013 Triumph T100A, T100SS, 5TA (1959-66) T100, T100C, T100S (1966) Inlet Valve (Alpha valve no.V188) Head Diameter:...
+

pistring3692
£2.95 (£3.54 inc VAT)
OEM: E3692, 70-3692
Harris Piston Ring for Triumph 350cc - 70-3692 Supplied as ONE single Piston Ring. Oil Control Piston Ring. Suit Triumph 3TA and T90 Bore Size : 58.24mm...

bolts2980t-B19
£2.25 (£2.70 inc VAT)
OEM: 70-2980, E2980
Triumph Rocker Box Stud - 70-2980 Coarse thread to screw into the rocker box, and fine thread for the nut. OEM: 70-2980, E2980
+

valvecollar3742-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3742, E3742
Triumph - Valve Spring Top Collar - 350/500cc Unit Twins Valve spring retaining collar, sits on top of the valve spring with the valve collets. Made in...
+

inlet5351/2
£94.95 (£113.94 inc VAT)
OEM: 70-5351, E5351, 70-5352, E5352
Triumph Inlet Manifolds - T120C, T120R and T120TT Models Circa 1964-68 - Left and Right Hand Pair of left and right hand zinc plated carburetter adaptors...
+

pistring3691
£2.95 (£3.54 inc VAT)
OEM: E3691, 70-3691
Harris Piston Ring for Triumph 350cc - 70-3691 Supplied as ONE single Piston Ring. Plain Compression Piston Ring. Suit Triumph 3TA Bore Size : 58.24mm...

tapp0222-B18
£4.45 (£5.34 inc VAT)
OEM: 66-0222, 66-222
Valve Split Cotters /Collet - BSA M20 and M21 Models from 1937-63 Valve retaining split cotter  to fit inlet and exhaust valves Price per 1/2 cotter...
+

bolt244-B19
£4.95 (£5.94 inc VAT)
OEM: 06-6486
BIG END BOLT - Norton Commando, Atlas 650/750/850cc 3/8" cycle Norton Big end bolt, Commando 750cc & 850cc, Atlas, 650/750/850cc. OEM: 06-6486
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.