.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

rod0367-B17
£9.95 (£11.94 inc VAT)
OEM: 68-0367, 68-367
BSA A50 Exhaust Pushrod - All Models Circa 1962-70 Exhaust pushrod - correct fitment on all A50 models including Royal Star models to 1970. Length:...
+

cap0209-B13
£3.95 (£4.74 inc VAT)
OEM: 65-0209, 65-209
BSA Inlet Valve Stem Cap - B31 Models Circa 1946-60 + Iron Head B32 Models Circa 1949-53 Inlet valve stem cap to fit the  65-1511 inlet valve with 0.31"...
+

nut4086-C4
£3.95 (£4.74 inc VAT)
OEM: 83-4086, F14086
Triumph Head Steady Captive Nut Assembly - 650/750cc OIF Models - 1971 Onwards To suit Triumph 650/750cc OIF unit twins from 1971 onwards. 3/8" UNF...
+

valve072M-B22
£14.95 (£17.94 inc VAT)
OEM: 41-0022, 41-22, V211
BSA Inlet Valve B40 1960-63 and 350 Star from 1960-65 - 41-0022 Head Diameter: 1+15/32", 1.46 (37.0mm) Stem Diameter: 5/16", 0.31 (7.8mm) Length:...
+

conrod-9733
£149.95 £129.95 (£155.94 inc VAT)
OEM: 70-9733
BSA Bantam Conrod Kit - B175 and Bushman Models Circa 1969 Onwards Full connecting rod assembly includes: 1x Connecting rod 1x Small end needle bearing 1x...
+

wash3857
£0.25 (£0.30 inc VAT)
OEM: 70-3857, E3857
Triumph 1/4" Rocker Box Corner Bolt Washer - 350/500cc Models Circa 1959-71 Plain washer as used with the rocker box corner screws on 3TA, 5TA and T100...
+

valve3988-B22
£32.95 (£39.54 inc VAT)
OEM: 01-3988, V55
AJS 18, 18S, 18C, 18CS, Matchless G80, G80S, G80CS - Inlet Valve - 01-3988 AJS 500cc models - 18, 18S, 18C, 18CS from 1949-59 Matchless 500cc models -...
+

tapp6508
£29.95 (£35.94 inc VAT)
OEM: 70-6508, E6508, 71-3212, E13212
Triumph Drive Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Single Hole Left hand / drive side single hole alloy tappet guide block for...
+

vguide2300-B22
£25.95 (£31.14 inc VAT)
OEM: 71-2300, G542PB
BSA Bronze Inlet and Exhaust Guide - A65 OIF Models Circa 1971-72 Standard size inlet / exhaust valve guide - correct fitment on oil in frame A65 models...
+

conrod-1454
£149.95 £129.95 (£155.94 inc VAT)
OEM: 90-1454, 90-1619
BSA Bantam Conrod Kit - D7, D10, D10A and D14 Models Circa 1957 Onwards Suitable for all Bantam models as listed above. Full connecting rod assembly...
+

rod0365-B17
£9.95 (£11.94 inc VAT)
OEM: 68-0365, 68-365
BSA A50 Inlet Pushrod - All Models Circa 1962-70 Inlet pushrod - correct fitment on all A50 models including Royal Star models to 1970. Length: 6+1/4"...
+

pipeGS273-UK-bent-B3
£42.95 (£51.54 inc VAT)
OEM: GS273, 70-1504, E1504, 70-0005
Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - UK Made Exhaust rocker box oil drain pipe and banjo assembly to fit all...
+

tapp7045-B13
£2.95 (£3.54 inc VAT)
OEM: 71-7045, E17045
Triumph Tappet Adjuster - T140 and TR7 Models From 1978 Onwards - UNF Thread Rocker adjusting pin with allen key adjustment. Correct fitment on later T140...
+

tapp6509
£29.95 (£35.94 inc VAT)
OEM: 70-6509, E6509, 71-3211, E13211
Triumph Timing Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Two Hole Right hand / timing side twin hole alloy tappet guide block for...
+

screw6609-B19
£1.75 (£2.10 inc VAT)
OEM: 14-6609
Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...
+

rocker003
£4.95 (£5.94 inc VAT)
OEM: 857-38
Ariel Fluted Rocker Box Inspection Cap For Ariel 350/500cc Heavyweight singles. OEM: 857-38
+

tappet1493-B13
£24.95 (£29.94 inc VAT)
OEM: 66-1493
BSA Inlet / Exhaust Cam Follower Tappet - B Group Circa 1946-60 + M Group Circa 1937-63 Exhaust and inlet tappet on B31, B32, B33, B34 models from 1946...
+

tappet3976-B13
£26.95 (£32.34 inc VAT)
OEM: 71-3976, E13976
Triumph Cam Follower Tappet - T160 Models Circa 1975-76 Single tappet / cam follower with oil hole, locates in the tappet block and follows the camshaft...
+

pist400
£174.95 (£209.94 inc VAT)
One JP Piston for AJS 18CS 500cc or Matchless G80CS 500cc 1956-59 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 86mm...

spin0294-B13
£14.95 (£17.94 inc VAT)
OEM: 40-0294
BSA Rocker Spindle - Unit Singles Circa 1959-73 - Inlet and Exhaust Inlet and/or exhaust rocker spindle shaft as used on C15, B40, B44 and B50 models....
+

vguide6420-B22
£10.95 (£13.14 inc VAT)
OEM: 70-6420, E6240, G540PB
Triumph / BSA Bronze Inlet and Exhaust Guide - T150, T160, A75 and X75 Models Standard size inlet / exhaust valve guide - correct fitment on all T150,...
+

pipeGS272-unbent-B3
£19.95 (£23.94 inc VAT)
OEM: GS272, 70-1503, E1503, 70-0004
Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Inlet rocker box oil drain pipe and banjo assembly to fit all...
+

screw7028
£0.95 (£1.14 inc VAT)
OEM: 21-7028, S7028
Triumph Bracket to Carb Grub Screw - T140E and TSS Models With Twin MKII Amal Carbs Attaches to left hand carb to position the flat bracket that connects...
+

cap0400-B4
£14.95 (£17.94 inc VAT)
OEM: 57-0400, T400
Triumph Gearbox Oil Filler / Inspection Cap - Pre Unit Models Circa 1939-50 Alloy domed shaped cap with knurled edge. Correct fitment on early pre unit...
+

bolt6103-B19
£0.95 (£1.14 inc VAT)
OEM: 14-6103
Triumph Rocker Box Cover Screw - T140 and TR7 Models Circa 1973-78 Rocker box / tappet Inspection cover hex head set screw as used on 750cc twins circa...
+

bolt2889-B19
£4.45 (£5.34 inc VAT)
OEM: 71-2889, E12889
Triumph Rocker Box Bolt - Late OIF 650cc Twins - Circa 1972 Onwards Shouldered flange bolt - correct fitment on later oil in frame T120 and TR6 models...
+

pipeGS273-unbent-B3
£18.95 (£22.74 inc VAT)
OEM: GS273, 70-1504, E1504, 70-0005
Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Exhaust rocker box oil drain pipe and banjo assembly to fit all...
+

spin1512-B13
£34.95 (£41.94 inc VAT)
OEM: 70-1512, E1512
Triumph Rocker Spindle - Pre Unit 500/650cc Models - 1946-62 + Unit 650cc Models Inlet and exhaust rocker shaft - two required per bike. Correct fitment...
+

bolt6620-B19
£1.95 (£2.34 inc VAT)
OEM: 14-6620
Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78 Chaincase cover posi-drive screw - correct fitment on OIF T120 + T140 and TR7...
+

bolt6606-B19
£1.45 (£1.74 inc VAT)
OEM: 14-6606
1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples Posi-drive screw used on various Triumph models - rocker box cover on...
+

stud0074-B19
£3.45 (£4.14 inc VAT)
OEM: 67-0074, 29-0565, 67-74, 29-565
BSA Cylinder Barrel Fixing Stud / Inner Crankcase Stud - A7 and A10 Models Cylinder base stud as used on all A7 + early A10 models circa 1949-57 Nine...
+

wash3963
£0.25 (£0.30 inc VAT)
OEM: 60-3963, D3963
Triumph 1/4" Rocker Box Set Screw Washer - 750cc Twins From 1973 Onwards Plain washer used with the set screws to secure the rocker box covers on T140,...
+

cov3671-B4
£12.95 (£15.54 inc VAT)
OEM: 71-3671, E13671
Triumph Tappet Inspection Cover - T140 and TR7 Models Circa 1974-85 Six hole rocker box inspection cover as used on the models listed from 1974 onwards....
+

stud1214-B19
£5.45 (£6.54 inc VAT)
OEM: 67-1214
BSA Cylinder Barrel Fixing Stud - A10 Models Circa 1958-62 Cylinder base stud as used on all later A10 models from 1958 onwards. Nine required per bike....
+

pist198
£124.95 (£149.94 inc VAT)
OEM: CP198, C.P.198, CP 198, E4670, 70-4670
Pair of Harris Pistons for Triumph T21/T90 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.25mm...

stud2972-B19
£1.95 (£2.34 inc VAT)
OEM: 70-2972, E2972
Triumph Inlet Manifold Stud - Pre Unit 500cc Models Circa 1952-59 - Long Type Long inlet manifold to cylinder head stud. Correct fitment on pre unit T100...
+

stud2920-B19
£1.95 (£2.34 inc VAT)
OEM: 70-2920, E2920
Triumph Inlet Manifold Stud - Pre Unit 6T and T110 Models - Circa 1950-62 Inlet manifold to cylinder head stud. Correct fitment on pre unit 6T models...
+

pist-JP-ES2
£169.95 (£203.94 inc VAT)
OEM: NM23175, A2-161, A2-164, 19776
Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - JP Supplied as 1 piston, complete with rings, gudgeon pin and circlips. Flat head with valve...

crod593W
£289.95 (£347.94 inc VAT)
OEM: 71-3006, E13006
Hepolite H-Beam Connecting Rods - Triumph T140 TR7 and TSX models from 1973 Onwards Newly developed H-Beam profile con rods suitable for all T140, TR7...
+

bolt1484-B19
£8.95 (£10.74 inc VAT)
OEM: 70-1484, E1484
Triumph Cylinder Head Medium Bolt - Pre Unit Models Circa 1939-62 High tensile inner fixing cylinder head bolt. Correct fitment on all 5T, 6T and T110...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.