.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

oring727H
£0.95 (£1.14 inc VAT)
OEM: 60-3548, 70-3253, E3253
Rocker spindle O Ring for Triumph 200, 350, 500, 650 and 750cc models This o-ring is the little sucker that you replace to stop that oil leak from the...

gask1577
£0.75 (£0.90 inc VAT)
OEM: 70-1577, E1577, 65-5800, E1564, 70-1564, 67-42, 67-0042, NT376
Triumph/BSA Fibre Washer - Sump Base Gasket, Rocker Box Gasket, Inspection Cap Fibre washer used extensively on Triumph and BSA models. Approximately...
+

anti-sump-tap-switch-mag
£54.65 (£65.58 inc VAT)
Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems A solution to a frequent problem of wet sumping. On many of the older classic...
 

seal237
£1.25 (£1.50 inc VAT)
OEM: 70-4752, E4752
Push rod cover tube square section seal for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Square Section Seal OEM: 70-4752, E4752
+

seal541
£1.25 (£1.50 inc VAT)
OEM: 70-3547, E3547
White silicone push rod 'O' ring Suit some of the 650cc engines Fits the 3TA, 5TA, T100 and other 350/500cc unit engines. Square section o-ring seal OEM:...
+

tapp731
£0.55 (£0.66 inc VAT)
OEM: 70-8782, 70-7563, E8782, E7563
Triumph Tappet Guide Block O Ring - 500/650/750cc Models  OD: 1" (25.4mm) ID: 7/8" (22.3mm) Thickness: 1/6" (1.9mm) Viton Rubber OEM:  70-8782,...
+

washer1335
£0.95 (£1.14 inc VAT)
OEM: 70-1335, E1335, 40-0159, 40-159
Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug Also used for the T140 oil in frame sump washer. OEM: 70-1335, E1335,  40-0159,...
+

gear007H-B4
£4.45 (£5.34 inc VAT)
OEM: 57-2166, 70-8231, E732, 70-0732
Triumph / BSA - Gearbox Inspection Plug / Chaincase Filler Cap - Singles, Twins and Triples BSA all unit singles chain case A50, A65. Triumph 3TA, 5TA,...
+

nut036-B14
£0.75 (£0.90 inc VAT)
OEM: P0172A, S1-52, 21-7052, PO172A, PO-172A, 02-0046
Triumph Twin - Cylinder Base Nut - P0172A Also to secure top head stay to engine. 3/8" CEI OEM: P0172A, S1-52, PO172A, PO-172A, 02-0046
+

seal538
£1.25 (£1.50 inc VAT)
OEM: 70-7310, E7310
Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Also suits some of the later 350/500cc engines (confused? -...
+

wash3751
£0.75 (£0.90 inc VAT)
OEM: 70-3751
Triumph Rocker Cover Inspection Cap Washer Triumph Unit models OEM: 70-3751
+

seal537
£1.25 (£1.50 inc VAT)
OEM: 71-1283
Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines O - ring OEM: 71-1283
+

oil-tap3-B3
£15.95 (£19.14 inc VAT)
Wet Sumping, Anti Sump, Oil Pipe Tap A solution to a frequent problem of wet-sumping. On many of the older classic bikes, the oil pump and/or...
+

nut056H-B18
£3.95 (£4.74 inc VAT)
OEM: 70-1435
Triumph T120, TR6 etc Rocker spindle domed nut, as used on all Triumph 500,600cc twins up to (-1968). OEM: 70-1435
+

nut0879-B14
£1.25 (£1.50 inc VAT)
OEM: 82-0879, F879, GS662, 60-4264, 75-0053
1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting + Other Uses Used extensively on many Triumph unit models. Rocker box stud nut on...
+

tapp176-B18
£1.75 (£2.10 inc VAT)
OEM: 71-3748, 40-0167, 99-0067
Valve split cotters - valve collet - Triumph, BSA Triumph 500cc, 650cc, 750cc, T100, T120, T140, T150, T160. BSA 250cc, 750cc, C15, A75 Rocket 3. Price per...
+

seal542
£1.45 (£1.74 inc VAT)
OEM: 70-1496, E1496
Triumph Bottom Push Rod Tube O Ring Seal - 70-1496 Bottom joint washer for various pre unit and unit 650cc twins. OD: 1+1/4" (31.4mm) ID: 15/16"...
+

wash2184
£0.95 (£1.14 inc VAT)
OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213
Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses  As used extensively on various unit models - cylinder head bolts, frame parts + universal...
+

wash1575-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1575, 40-0158, E1575, 40-158
Triumph/BSA Rocker Spindle Thrust Washer - Various Models As used on many BSA models including A7, A10,  A50, A65, B25, B44, B40 and C15. Plus...
+

rod2620-B17
£10.95 (£13.14 inc VAT)
OEM: 70-2620
Triumph Push Rod - 500/650cc Pre Unit and 650cc Unit Models From 1939-73 Correct fitment for all pre-unit Triumph 500/650cc models 5T, T100, 6T, T110,...
+

clip6869-B13
£1.45 (£1.74 inc VAT)
OEM: 70-6869, E6869, 67-0101, WE479, 40-0979
Triumph Piston Gudgeon Pin Circlips (2) - Pre Unit and Unit 500/650cc Models + Unit Singles Gudgeon wristpin circlip - correct fitment on: Pre unit and...
+

tapp0200H-B18
£2.45 (£2.94 inc VAT)
OEM: 97-0200, H200
Triumph Tappet Guide Block Set Bolt - 350/500/650/750cc Models Pre-unit and unit models including 3TA, 5T, 6T, TR5, 5TA, T100, T110, T120, T140. OEM:...
+

rocker-006W-B4
£6.95 (£8.34 inc VAT)
OEM: 70-1564, E1564, 40-0968
Triumph Pre Unit Rocker Box Inspection Cap and Crankcase Filter / Sump Plug on Unit 350/500cc Models Rocker cover inspection cap on 500/650cc pre unit...
 

pipe3655-F3
£3.95 (£4.74 inc VAT)
OEM: 82-3655, 82-3182, F3655, F3182
Triumph Oil Filter Union Nut and Connector Pipe - Pre Unit and Unit Models - 1954 Onwards Pipe locates between the rubber oil feed pipe and the oil...
+

nut0103-B14
£0.95 (£1.14 inc VAT)
OEM: 37-0103, W103, 40-3226
1/4" x 26 CEI Nut - Various Uses on Pre Unit and Unit Triumph and BSA Models Used extensively for many applications including cylinder head, manifold...
+

wash9554
£0.35 (£0.42 inc VAT)
OEM: 70-9554, E9554
Triumph Intake Manifold Carburettor Insulating Rubbber Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from...
+

nut0400-B18
£1.95 (£2.34 inc VAT)
OEM: 97-0400, H400
Triumph Rocker Oil Feed Domed Nut - Unit 350/500cc Models Circa 1959-71 + T20 Tiger Cub Rocker oil feed line acorn nut - correct fitment on 3TA, 5TA, T90...
+

wash1574-B13
£1.45 (£1.74 inc VAT)
OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103
Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...
+

rod4008-B17
£3.95 (£4.74 inc VAT)
OEM: 70-4008
Triumph T100/5TA Engine Pushrod As fitted to all 500cc Unit construction Twins (1958-74) Length approx 120-125mm Made in England by LF Harris OEM:...

rocker4610-009
£3.95 (£4.74 inc VAT)
OEM: 70-3752, E3752, 70-4610, E4610, 71-2744, E12744
Triumph Rocker Box Inspection Cap - Unit 350/500/650cc Models - Circa 1957-74 Rocker box inspection cap - correct fitment on unit construction 3TA, 5TA,...
 

valv255-B17
£17.95 (£21.54 inc VAT)
OEM: 70-4221, 70-7400, 99-7037, E4221, E7400
Valve Spring Set - Triumph T120, T140, TR6, TR7 650cc, 750cc Twin (1963-) OEM: 70-4221, 70-7400, 99-7037, E4221, E7400
+

wash9555
£0.95 (£1.14 inc VAT)
OEM: 70-9555, E9555
Triumph Intake Manifold Carburettor Cupped Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from 1970-78....
+

clip732m-B18
£1.25 (£1.50 inc VAT)
OEM: 70-3209
Valve Guide Circlip as fitted to Triumph T140, T100, T20 and BSA C15 models. OEM: 70-3209
+

seal1707
£3.95 (£4.74 inc VAT)
OEM: 71-1707, E11707
Triumph Push Rod Tube Collar / Sleeve - 500/650/750cc Twins From 1971 Onwards Zinc plates steel pushrod seal collar - locates between the tappet guide...
+

pipe4159
£21.95 (£26.34 inc VAT)
OEM: 70-4159, E4159, 70-3082, E3082, 70-6349, E6349
Triumph T120/TR6, 650cc Rocker Oil Feed Pipe Available as standard or UK made - please select option. Can be used instead of 71-2428, E12428, 70-6349,...

nut2016-B14
£3.95 (£4.74 inc VAT)
OEM: 21-2016, S2016, 60-3761, D3761, 21-0549, S549
Triumph Con Rod Big End Nut - Unit 650cc Twins + T150, TR25W and BSA B25 Models - Circa 1969-73 Self locking connecting rod nut - correct fitment on T120,...
+

wash1330-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1330, 40-0157, E1330, 40-157
Triumph / BSA Rocker Spindle Thrust Washer - Various Pre Unit and Unit Models Correct fitment on pre unit and unit models - singles, twins and triples...
+

pipe3805-224
£23.95 (£28.74 inc VAT)
OEM: 70-7576, E7576, 70-3805, E3805, 70-6351, E6351
Triumph Rocker Oil Feed Pipe - 350/500cc Unit Models - 1957 Onwards A rocker oil feed pipe and banjo assembly to fit 350/500cc unit twins. Designed to...
+

valve011-B22
£16.95 (£20.34 inc VAT)
OEM: E2904, 70-2904
Triumph 650/750cc Exhaust Valve - 70-2904 Exhaust Valve 6T/T120/T140 (1955-83) (Alpha Valve no.V24) Head Diameter: 1.437 Stem Diameter: 0.3095 Length:...
+

nut4264-B14
£0.95 (£1.14 inc VAT)
OEM: 60-4264, GS662, D4264
1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting + Other Uses Used extensively on many Triumph unit models. Rocker box stud nut on...
+

vguide3208t
£9.45 (£11.34 inc VAT)
OEM: E3208, 70-3208, G461
Triumph Inlet / Exhaust Valve Guide - T20 Tiger Cub + 350/500cc Twins Circa 1957-66 - Standard or Oversize Suitable for both inlet and exhaust on many...

seal1497
£1.25 (£1.50 inc VAT)
OEM: 70-1497, 70-3547, E1497, E3547
Triumph Push Rod Tube Top Seal - Fibre Type - 350/500/650cc Pre Unit and Early Unit Twins Fibre upper push rod joint washer as used on various models...
+

clip238H-B18
£1.45 (£1.74 inc VAT)
OEM: 70-4671, E4671
Triumph Unit models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4671, E4671
+

push4746
£1.05 (£1.26 inc VAT)
OEM: 70-4746
Triumph Push Rod Steel Washer Steel cup, T90, T100, T120, T140, T150 OEM:  70-4746
+

smallend134-B8
£12.95 (£15.54 inc VAT)
OEM: 6-0492, SE13
BSA Singles Small End Bearing - 66-0492 B31, B32, B33, B34, B40, SS90, B44, B50, M33, M22, M23, M24 (1937-66) Small end bush, piston pin bush, gudgeon pin...
+

studset426-B14
£9.95 (£11.94 inc VAT)
OEM: 70-2980, E2980, 31-0222, 70-8012, 70-3302, 82-0879, F879
Triumph Rocker Box Stud and Nut Set - 650cc Unit Models Circa 1963-70 Rocker box to cylinder head - six studs, washers and nuts. Correct fitment on 650cc...
+

pist3958
£119.95 (£143.94 inc VAT)
OEM: 70-3958, E3958, CP172
Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM Supplied as 1 piston, complete with rings, gudgeon pin...

capNT367-B4
£13.45 (£16.14 inc VAT)
OEM: NT367, 99-3544
Triumph Primary Chaincase Filler/Inspection Cap - Pre Unit Models Circa 1939-62 Cast alloy chaincase oil filler plug embossed with 'USE LIGHTOIL -...
+

nut2922-B14
£1.95 (£2.34 inc VAT)
OEM: 70-2922, 70-1530, E2922, E1530
Conrod Big End Nut - Triumph Pre Unit and Unit 250/500/650cc Singles and Twins - Circa 1946-70 Self locking connecting rod nut - correct fitment on pre...
+

tappet3059R-LFH
£39.95 (£47.94 inc VAT)
OEM: 71-7008, 70-3059, E17008, E3059, 70-3059R, 71-7644, E3059R, E17644
Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet Single cam follower, sits in the tappet block and follows the...
 

rocker010-B4
£16.95 (£20.34 inc VAT)
OEM: 70-4610
Chrome Triumph Rocker Cover Caps - set of 4 Suitable for Triumph. Unit Triumph. Complete with washers. Thread diameter approx 1+3/16" (30mm) OEM: 70-4610
+

plug5343-B13
£1.95 (£2.34 inc VAT)
OEM: 82-5343, F5343
Triumph Oil Tank Drain Plug - Unit Pre OIF Twins and Triples From 1963 Onwards Oil tank drain plug as used on pre OIF unit T100, T120, TR6, T150 models....
+

rings037
£35.95 (£43.14 inc VAT)
OEM: R11050, E6864, E6865, 70-6864, E6865
Pair of Hepolite Piston Rings for Triumph T120 650cc models etc (1959-75). Supplied as 2 set of Hepolite Piston Rings. Bore Size : 71mm Standard, available...

tapp9352-B13
£21.95 (£26.34 inc VAT)
OEM: 70-9352
Triumph 500cc, 650cc, 750cc, T100, T120, T140 inlet tappet guide block. OEM: 70-9352
+

oilcap9659-B4
£28.95 (£34.74 inc VAT)
OEM: 82-9659, F9659, 68-8368
Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models Complete cap and dipstick assembly - 2" chrome plated...
+

pipe248
£21.95 (£26.34 inc VAT)
OEM: 42-0048, 42-48
BSA A7, A10 Rocker oil feed pipe complete. Ariel Huntmaster 650cc Also BSA B31, B33 swing arm models pipe diameter: 3/16" OEM: 42-0048, 42-48
+

pist037
£82.95 (£99.54 inc VAT)
OEM: 70-6868, E6868, 17844
Pair of Hepolite Pistons for Triumph T120 650cc models etc (1959-75). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

seal3758
£1.25 (£1.50 inc VAT)
OEM: 70-3758, E3758
Triumph Push Rod Seal - Bottom To fit 5TA, 3TA, T100A models from 1957-1963 OEM 70-3758, E3758
+

clip425-B18
£1.95 (£2.34 inc VAT)
OEM: 70-4609, E4609
Triumph T120, TR6 models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4609, E4609
+

pipe551-B3
£39.95 (£47.94 inc VAT)
OEM: 42-8346, 42-8347
BSA A7, A10 armoured oil feed pipes Exact replica of genuine pipes Comes as 2 pipes, approx 17" and 18" long, ready to fit OEM: 42-8346, 42-8347
+

bolt742-B14
£23.95 (£28.74 inc VAT)
Triumph High Tensile 9 piece Cylinder Head Bolt Set for TR6/T120 Unit models. Suit most later Triumgh twin 650cc 1x 70-4771 Centre head bolt - 5/16" x 3" x...
+

bolt553-B18
£3.45 (£4.14 inc VAT)
OEM: 65-0317
BSA A7, A10 Rocker spindle oil feed bolt OEM: 65-0317

rings035
£35.95 (£43.14 inc VAT)
OEM: R26490
Pair of Hepolite Piston Rings for Triumph T140/TR7 750cc models (1972-). Supplied as 2 set of Hepolite Piston rings. Bore Size : 76mm Standard, available...

valv256-B17
£15.95 (£19.14 inc VAT)
OEM: 70-4011, 70-5946, E4011
Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards Correct fitment on 3TA, T90, 5TA and T100 models circa 1966-73. OEM: 70-4011,...
+

piston9488
£99.95 (£119.94 inc VAT)
OEM: 70-9488, 70-6868
Harris Pistons for Triumph T120/TR6 650cc - 70-9488 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...

bolt2982-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2982, E2982
Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68 Correct fitment on pre unit TR5 and T100 models circa...
+

pist-16945
£39.95 (£47.94 inc VAT)
OEM: 40-0970, 70-7998, E7998, 16945
Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71 Suitable for 250cc singles with the square alloy barrel - B25, C25 and...

seal3391
£1.95 (£2.34 inc VAT)
OEM: 70-3391, E3391, 40-0180, 40-180
Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67 Lower push rod tube oil joint washer as used on all T15 and T20 models...
+

tapp9353-B13
£29.95 £19.95 (£23.94 inc VAT)
OEM: 70-9353
Triumph 500cc, 650cc, 750cc, T100, T120, T140 exhaust tappet guide block. OEM: 70-9353
+

stud2962-B13
£1.95 (£2.34 inc VAT)
OEM: 70-2962, E2962
Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69 Length: 1+1/4" (32mm) Diameter: 5/16" (7.7mm) BSW/CEI threads OEM:...
+

wash3302
£0.25 (£0.30 inc VAT)
OEM: 70-3302, E3302, 75-0214, 75-214, S21/91
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...
+

nut066M-B14
£2.95 (£3.54 inc VAT)
OEM: 67-1537
BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537
+

tapp470-B18
£1.25 (£1.50 inc VAT)
OEM: 70-0470
Hexagonal Tappet Nut- Triumph T120/T140 and BSA A7/A10 OEM: 70-0470 CEI thread Made in England
+

valve2900
£9.45 (£11.34 inc VAT)
OEM: E2900, 70-2900, G424
Triumph Exhaust Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59,  TR5 models...

rocker2079-B4
£1.95 (£2.34 inc VAT)
OEM: 71-2079, E12079
Triumph Rocker Box Inspection Plug - 500/650cc Unit Twins From 1971 Onwards Threaded alloy tappet access cap - correct fitment on T100, T120 and TR6...
+

seal7363-B13
£1.95 (£2.34 inc VAT)
OEM: 60-7363, 06-2726, D7363, 062726
Valve Guide Oil Seal - Triumph/Norton - 60-7363, 06-2726 Inlet valve guive valve seal, as fitted to Triumph T140, Norton Commando and other models Valve...
+

tappet8801-LFH
£38.95 (£46.74 inc VAT)
OEM: 70-8801, E8801
Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...
 

bolt014-B19
£8.95 (£10.74 inc VAT)
OEM: 70-6576, 21-2016, 70-2490, E2490, E6576
BIG END BOLT - Triumph Triumph Big end bolt, T120/TR6/6T and others Thread:  5/16" UNF -  24 TPI Note - the correct nut that fits this is 60-3761 see link...
+

valve2899
£9.45 (£11.34 inc VAT)
OEM: E2899, 70-2899, E1480, 70-1480, G420
Triumph Inlet Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59, TR5 models circa...

valve094-B22
£16.95 (£20.34 inc VAT)
OEM: E4603, 70-4603
Triumph 650cc/750cc Inlet Valve - 70-4603 Triumph T120 Bonneville (1963-72) TR6 from Eng. No. (1966-72) Inlet Valve (Alpha valve no.V245) Also for T140...
+

vguide3828
£11.95 (£14.34 inc VAT)
OEM: 70-3828, E3828, G424PB
Triumph Exhaust Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 2+9/32", 2.27" (57.7mm) Available as standard, +.002...

nut0449-B14
£0.50 (£0.60 inc VAT)
OEM: 02-0449
3/8" CEI Nut - BSA Rocker Spindle / Timing Cover / Brake Cam Nut 3/8" x 26 CEI Thin OEM: 02-0449
+

vguide3827
£11.95 (£14.34 inc VAT)
OEM: 70-3827, E3827, G420PB
Triumph Inlet Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 1+31/32", 1.97" (50.1mm) Available as standard, +.002...

piston-rings6893/4
£37.95 (£45.54 inc VAT)
OEM: 70-6893, 70-6894, E6893, E6894, R13570
Pair of Harris Piston Rings for Triumph 500cc T100 Models - Circa 1958-74 Supplied as a full sets of piston rings - 2x top compression rings, 2x second...

valv227-B17
£13.95 (£16.74 inc VAT)
OEM: VS510, 99-3700, E1487, E1488, 70-1487, 70-1488
Valve Spring Set - Triumph 5T, TR5, T100, 6T, TR6, T110 (racing models) & T120 (1959-60). 8 Springs. Terry No VS510 Includes 4 outer springs and 4...
+

wash2080-B13
£1.95 (£2.34 inc VAT)
OEM: 71-2080, E12080
Triumph Rocker Box Inspection Plug Copper Washer - 500/650cc Unit Twins From 1971 Onwards Folded copper washer for use with the threaded alloy tappet...
+

tapp1513A-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1513, E1513, 67-0056, 67-56
Triumph/BSA Mushroom Head Tappet Adjuster - Pre Unit + 650/750cc Unit Twins + A7 and A10 Models - 1946 On Rocker adjusting pin with mushroom head and hex...
+

nut0550-B18
£2.95 (£3.54 inc VAT)
OEM: 21-0550, S550
Triumph Rocker Oil Feed Dome Nut - 750cc Twins and Triples From 1969 Onwards Chrome plated rocker spindle / oil feed pipe domed acorn nut - correct...
+

seal3540
£2.25 (£2.70 inc VAT)
OEM: 70-3540, E3540
Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67 Upper push rod tube oil joint washer as used on all T15 and T20 models from 1954...
+

fkcap029-F2
£22.95 (£27.54 inc VAT)
OEM: 90-8035
2" Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel/oil cap with offset vent - push turn fit and integral cork seal. Will fit most oil tanks...
+

valvecollar1543-B13
£5.45 (£6.54 inc VAT)
OEM: 70-1543, E1543
Triumph Valve Spring Top Collar - 650/750cc Twins - 1963-82 Triumph various models, valve spring retaining collar, sits on top of the valve spring with...
+

pipe249
£21.95 (£26.34 inc VAT)
OEM: 40-0183, 40-183, 47-8397, 41-0807, 41-807
BSA Rocker Oil Feed Pipe - C15, B25, B40, B44, B50 Models A rocker oil feed pipe and banjo assembly to fit many of the BSA unit singles. Designed to be...
+

vvg424
£99.95 (£119.94 inc VAT)
OEM: 70-3827, 70-3828, 70-4603, 70-2904
Triumph T120 (1963-72), TR6 (1966-72) 650cc, Complete Valve guide set. To Engine No. DU44394 Includes Bronze guides, and valves. Valve Guides : Set of 4...
+

stud2813
£3.25 (£3.90 inc VAT)
OEM: 71-2813, E12813
Triumph - Inlet Manifold Stud - 650/750cc Unit Twins - 1972-78 Suitable for 650/750cc Unit Twins from 1972-78 with bolt-on inlet manifolds Overall...
+

bolt401-B19
£1.95 (£2.34 inc VAT)
OEM: 14-1401
Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401
+

smallend1511-B8
£13.95 (£16.74 inc VAT)
OEM: 70-1511, SE106, E1511
Triumph 500/650 Small End Bearing - 70-1511 5T, T100, TR5, 6T, T110, TR6, T120 (1946 -) Small end bush, small end bearing. OEM: 70-1511, SE106, E1511
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.