Engine & Transmission :: Engine Upper

CODE: pist-JP-ES2

Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - JP

£169.95 (£203.94 inc VAT)

OEM: NM23175, A2-161, A2-164, 19776

Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - JP Supplied as 1 piston, complete with rings, gudgeon pin and circlips. Flat head with valve...

Select Options

CODE: stud2972-B19

Triumph Inlet Manifold Stud - Pre Unit 500cc Models Circa 1952-59 - Long Type

£1.95 (£2.34 inc VAT)

OEM: 70-2972, E2972

Triumph Inlet Manifold Stud - Pre Unit 500cc Models Circa 1952-59 - Long Type Long inlet manifold to cylinder head stud. Correct fitment on pre unit T100...

Quantity:

+ −

CODE: stud2920-B19

Triumph Inlet Manifold Stud - Pre Unit 6T and T110 Models - Circa 1950-62

£1.95 (£2.34 inc VAT)

OEM: 70-2920, E2920

Triumph Inlet Manifold Stud - Pre Unit 6T and T110 Models - Circa 1950-62 Inlet manifold to cylinder head stud. Correct fitment on pre unit 6T models...

Quantity:

+ −

CODE: tappet1493-B13

BSA Inlet / Exhaust Cam Follower Tappet - B Group Circa 1946-60 + M Group Circa 1937-63

£24.95 (£29.94 inc VAT)

OEM: 66-1493

BSA Inlet / Exhaust Cam Follower Tappet - B Group Circa 1946-60 + M Group Circa 1937-63 Exhaust and inlet tappet on B31, B32, B33, B34 models from 1946...

Quantity:

+ −

CODE: pist198

Harris Pistons for Triumph T21/T90 350cc

£124.95 (£149.94 inc VAT)

OEM: CP198, C.P.198, CP 198, E4670, 70-4670

Pair of Harris Pistons for Triumph T21/T90 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.25mm...

Select Options

CODE: vcup7203-B13

Triumph Valve Spring Bottom Collar / Cup - T140, TR7 and TSX Models - Circa 1979 Onwards

£4.45 (£5.34 inc VAT)

OEM: 71-7203, E17203

Triumph Valve Spring Bottom Collar / Cup - T140, TR7 and TSX Models - Circa 1979 Onwards Valve spring retaining collar, sits under the valve spring...

Quantity:

+ −

CODE: clip0954x2-B13

BSA Triumph Piston Gudgeon Pin Circlips - G Shaped With Tangs

£1.95 (£2.34 inc VAT)

OEM: 66-0954, 66-954, 71-3185, 71-3700, 71-2970

BSA Triumph Piston Gudgeon Pin Circlips - G Shaped With Tangs 2 x piston wrist pin circlips suitable for a wide range of BSA models including: A10, C12,...

Quantity:

+ −

CODE: wash3963

Triumph 1/4" Rocker Box Set Screw Washer - 750cc Twins From 1973 Onwards

£0.25 (£0.30 inc VAT)

OEM: 60-3963, D3963

Triumph 1/4" Rocker Box Set Screw Washer - 750cc Twins From 1973 Onwards Plain washer used with the set screws to secure the rocker box covers on T140,...

Quantity:

+ −

CODE: bolt6620-B19

Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78

£1.95 (£2.34 inc VAT)

OEM: 14-6620

Triumph Chaincase Cover Cheese Head Screw - 650/750cc Twins Circa 1969-78 Chaincase cover posi-drive screw - correct fitment on OIF T120 + T140 and TR7...

Quantity:

+ −

CODE: bolt6606-B19

1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples

£1.45 (£1.74 inc VAT)

OEM: 14-6606

1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples Posi-drive screw used on various Triumph models - rocker box cover on...

Quantity:

+ −

CODE: stud1214-B19

BSA Cylinder Barrel Fixing Stud - A10 Models Circa 1958-62

£5.45 (£6.54 inc VAT)

OEM: 67-1214

BSA Cylinder Barrel Fixing Stud - A10 Models Circa 1958-62 Cylinder base stud as used on all later A10 models from 1958 onwards. Nine required per bike....

Quantity:

+ −

CODE: stud0074-B19

BSA Cylinder Barrel Fixing Stud / Inner Crankcase Stud - A7 and A10 Models

£3.45 (£4.14 inc VAT)

OEM: 67-0074, 29-0565, 67-74, 29-565

BSA Cylinder Barrel Fixing Stud / Inner Crankcase Stud - A7 and A10 Models Cylinder base stud as used on all A7 + early A10 models circa 1949-57 Nine...

Quantity:

+ −

CODE: cov3671-B4

Triumph Tappet Inspection Cover - T140 and TR7 Models Circa 1974-85

£12.95 (£15.54 inc VAT)

OEM: 71-3671, E13671

Triumph Tappet Inspection Cover - T140 and TR7 Models Circa 1974-85 Six hole rocker box inspection cover as used on the models listed from 1974 onwards....

Quantity:

+ −

CODE: spin1512-B13

Triumph Rocker Spindle - Pre Unit 500/650cc Models - 1946-62 + Unit 650cc Models

£34.95 (£41.94 inc VAT)

OEM: 70-1512, E1512

Triumph Rocker Spindle - Pre Unit 500/650cc Models - 1946-62 + Unit 650cc Models Inlet and exhaust rocker shaft - two required per bike. Correct fitment...

Quantity:

+ −

CODE: bolt6103-B19

Triumph Rocker Box Cover Screw - T140 and TR7 Models Circa 1973-78

£0.95 (£1.14 inc VAT)

OEM: 14-6103

Triumph Rocker Box Cover Screw - T140 and TR7 Models Circa 1973-78 Rocker box / tappet Inspection cover hex head set screw as used on 750cc twins circa...

Quantity:

+ −

CODE: bolt2889-B19

Triumph Rocker Box Bolt - Late OIF 650cc Twins - Circa 1972 Onwards

£4.45 (£5.34 inc VAT)

OEM: 71-2889, E12889

Triumph Rocker Box Bolt - Late OIF 650cc Twins - Circa 1972 Onwards Shouldered flange bolt - correct fitment on later oil in frame T120 and TR6 models...

Quantity:

+ −

CODE: cap0400-B4

Triumph Gearbox Oil Filler / Inspection Cap - Pre Unit Models Circa 1939-50

£14.95 (£17.94 inc VAT)

OEM: 57-0400, T400

Triumph Gearbox Oil Filler / Inspection Cap - Pre Unit Models Circa 1939-50 Alloy domed shaped cap with knurled edge. Correct fitment on early pre unit...

Quantity:

+ −

CODE: smallend172-UK-B8

Triumph Small End Bearing - Unit 500cc Models Circa 1959-69 + 1968 TR25W Models - UK Made

£4.95 (£5.94 inc VAT)

OEM: 70-4003, E4003, SE200

Triumph Small End Bearing - Unit 500cc Models Circa 1959-69 + 1968 TR25W Models - UK Made Connecting rod small end bush - correct fitment on 5TA and T100...

Quantity:

+ −

CODE: vguide6420-B22

Triumph / BSA Bronze Inlet and Exhaust Guide - T150, T160, A75 and X75 Models

£10.95 (£13.14 inc VAT)

OEM: 70-6420, E6240, G540PB

Triumph / BSA Bronze Inlet and Exhaust Guide - T150, T160, A75 and X75 Models Standard size inlet / exhaust valve guide - correct fitment on all T150,...

Quantity:

+ −

CODE: pist400

JP Pistons for AJS 18CS 500cc or Matchless G80CS 500cc 1956-59

£174.95 (£209.94 inc VAT)

One JP Piston for AJS 18CS 500cc or Matchless G80CS 500cc 1956-59 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 86mm...

Select Options

CODE: dowel2361-B13

Triumph Rocker Box to Head Dowel - 650/750cc OIF Twins Circa 1970-85

£0.30 (£0.36 inc VAT)

OEM: 71-2361, E12361

Triumph Rocker Box to Head Dowel - 650/750cc OIF Twins Circa 1970-85 Split dowel used to position the rocker boxes on the cylinder head - four required...

Quantity:

+ −

CODE: vguide2300-B22

BSA Bronze Inlet and Exhaust Guide - A65 OIF Models Circa 1971-72

£25.95 (£31.14 inc VAT)

OEM: 71-2300, G542PB

BSA Bronze Inlet and Exhaust Guide - A65 OIF Models Circa 1971-72 Standard size inlet / exhaust valve guide - correct fitment on oil in frame A65 models...

Quantity:

+ −

CODE: stud0018-B19

BSA Carburettor Mounting Stud / Cylinder Base Stud - A50 and A65 Models + Unit Singles

£3.95 (£4.74 inc VAT)

OEM: 68-0018, 68-18

BSA Carburettor Mounting Stud / Cylinder Base Stud - A50 and A65 Models + Unit Singles Carburettor stud on A50 and A65 models from 1966-70 + B25, B40,...

Quantity:

+ −

CODE: wash3224-B13

Triumph Rocker Spindle Thackeray Spring Washer - Unit 350/500cc Twins + Tiger Cub Models

£1.45 (£1.74 inc VAT)

OEM: 70-3224, E3224

Triumph Rocker Spindle Thackeray Spring Washer - Unit 350/500cc Twins + Tiger Cub Models Double coil thackeray spring washer - locates on the rocker...

Quantity:

+ −

CODE: wash1330-B13

Triumph / BSA Rocker Spindle Thrust Washer - Various Pre Unit and Unit Models

£0.75 (£0.90 inc VAT)

OEM: 70-1330, 40-0157, E1330, 40-157

Triumph / BSA Rocker Spindle Thrust Washer - Various Pre Unit and Unit Models Correct fitment on pre unit and unit models - singles, twins and triples...

Quantity:

+ −

CODE: wash2534-B13

Triumph Rocker Spindle Thrust Washer - Unit 350/500cc Twins Circa 1959-74 + Tiger Cub Models

£0.75 (£0.90 inc VAT)

OEM: 70-2534, E2534

Triumph Rocker Spindle Thrust Washer - Unit 350/500cc Twins Circa 1959-74 + Tiger Cub Models Correct fitment on 3TA, 5TA, T90 and T100 models - 6...

Quantity:

+ −

CODE: piston-rings-cp165

Harris Piston Rings For Triumph 350cc Unit Models - Circa 1959-1966

£18.95 (£22.74 inc VAT)

OEM: CP165, 70-3691, 70-3690, 70-3692, E3691, E3690, E3692

Harris Piston Rings For Triumph 350cc Unit Models - Circa 1959-1966 Suitable for 3TA and T90 models circa 1959-66. Supplied as a full sets of piston rings...

Select Options

CODE: screw7028

Triumph Bracket to Carb Grub Screw - T140E and TSS Models With Twin MKII Amal Carbs

£0.95 (£1.14 inc VAT)

OEM: 21-7028, S7028

Triumph Bracket to Carb Grub Screw - T140E and TSS Models With Twin MKII Amal Carbs Attaches to left hand carb to position the flat bracket that connects...

Quantity:

+ −

70-5351, E5351, 70-5352, E5352 - Triumph - Inlet Manifolds / Carburetter Adaptors - T120C, T120R and T120TT Models Circa 1966-68

CODE: inlet5351/2

Triumph Inlet Manifolds - T120C, T120R and T120TT Models Circa 1964-68 - Left and Right Hand

£94.95 (£113.94 inc VAT)

OEM: 70-5351, E5351, 70-5352, E5352

Triumph Inlet Manifolds - T120C, T120R and T120TT Models Circa 1964-68 - Left and Right Hand Pair of left and right hand zinc plated carburetter adaptors...

Quantity:

+ −

14-6609 - Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79

CODE: screw6609-B19

Triumph 1/4" UNC Cheese Head Cover Screw - 500/650/750cc Models Circa 1969-79

£1.75 (£2.10 inc VAT)

OEM: 14-6609

Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...

Quantity:

+ −

CODE: wash3857

Triumph 1/4" Rocker Box Corner Bolt Washer - 350/500cc Models Circa 1959-71

£0.25 (£0.30 inc VAT)

OEM: 70-3857, E3857

Triumph 1/4" Rocker Box Corner Bolt Washer - 350/500cc Models Circa 1959-71 Plain washer as used with the rocker box corner screws on 3TA, 5TA and T100...

Quantity:

+ −

CODE: piston-rings6893/4

Harris Piston Rings For Triumph 500cc T100 Models - Circa 1958-74

£37.95 (£45.54 inc VAT)

OEM: 70-6893, 70-6894, E6893, E6894, R13570

Pair of Harris Piston Rings for Triumph 500cc T100 Models - Circa 1958-74 Supplied as a full sets of piston rings - 2x top compression rings, 2x second...

Select Options

CODE: spin0294-B13

BSA Rocker Spindle - Unit Singles Circa 1959-73 - Inlet and Exhaust

£14.95 (£17.94 inc VAT)

OEM: 40-0294

BSA Rocker Spindle - Unit Singles Circa 1959-73 - Inlet and Exhaust Inlet and/or exhaust rocker spindle shaft as used on C15, B40, B44 and B50 models....

Quantity:

+ −

CODE: o/feed2252-B13

BSA Crankcase Oil Pipe Union / Adaptor - A, B, C and M Group Models From 1940 Onwards

£7.45 (£8.94 inc VAT)

OEM: 65-2252

BSA Crankcase Oil Pipe Union / Adaptor - A, B, C and M Group Models From 1940 Onwards Oil pipe adaptor union - from oil tank to crankcase. Correct...

Quantity:

+ −

CODE: otank3856

Triumph Oil Tank - Pre Unit 500/650cc Models Circa 1955-59

£132.95 (£159.54 inc VAT)

OEM: 82-3856, F3856

Triumph Oil Tank - Pre Unit 500/650cc Models Circa 1955-59 Oil tank with breather pipe located in the rear of the tank as used on 5T, TR5, 6T, T100 and...

Quantity:

+ −

CODE: pipe8461-B3

BSA Oil Feed Pipe Banjo - Oil Tank End - B31 and B33 Rigid and Plunger Frame Models Circa 1947-57

£12.95 (£15.54 inc VAT)

OEM: 65-8461

BSA Oil Feed Pipe Banjo - Oil Tank End - B31 and B33 Rigid and Plunger Frame Models Circa 1947-57 Complete tank end oil feed pipe - correct fitment on...

Quantity:

+ −

CODE: seal3540

Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67

£2.25 (£2.70 inc VAT)

OEM: 70-3540, E3540

Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67 Upper push rod tube oil joint washer as used on all T15 and T20 models from 1954...

Quantity:

+ −

CODE: pipeGS273-305W-B3

Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Imported

£14.95 (£17.94 inc VAT)

OEM: GS273, 70-1504, E1504, 70-0005

Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Imported Exhaust rocker box oil drain pipe and banjo assembly to fit all...

Quantity:

+ −

CODE: seal3391

Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67

£1.95 (£2.34 inc VAT)

OEM: 70-3391, E3391, 40-0180, 40-180

Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67 Lower push rod tube oil joint washer as used on all T15 and T20 models...

Quantity:

+ −

CODE: p/rings-R26730

Genuine AE / Hepolite Piston Ring Set - Norton Commando 850cc Models

£94.95 (£113.94 inc VAT)

OEM: R26730, 06-7960, 06-7225

Genuine AE/Hepolite Piston Ring Set - Norton Commando 850cc Models Set of genuine NOS AE Auto Parts / Hepolite piston rings for Norton Commando 850cc...

Select Options

CODE: nut0550-B18

Triumph Rocker Oil Feed Dome Nut - 750cc Twins and Triples From 1969 Onwards

£2.95 (£3.54 inc VAT)

OEM: 21-0550, S550

Triumph Rocker Oil Feed Dome Nut - 750cc Twins and Triples From 1969 Onwards Chrome plated rocker spindle / oil feed pipe domed acorn nut - correct...

Quantity:

+ −

CODE: nut1877-B14

1/4" UNF Nut - Triumph Inlet Manifold to Head Nut - 650/750cc Unit Twins Circa 1969-82 + Universal Use

£0.45 (£0.54 inc VAT)

OEM: 21-1877, S1877

1/4" UNF Nut - Triumph Inlet Manifold to Head Nut - 650/750cc Unit Twins Circa 1969-82 + Universal Use Inlet manifold to head stud securing nut on T100,...

Quantity:

+ −

GS273, 70-1504, E1504, 70-0005 - Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent

CODE: pipeGS273-UK-bent-B3

Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - UK Made

£42.95 (£51.54 inc VAT)

OEM: GS273, 70-1504, E1504, 70-0005

Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - UK Made Exhaust rocker box oil drain pipe and banjo assembly to fit all...

Quantity:

+ −

GS272, 70-1503, E1503, 70-0004 - Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models - 1938-62

CODE: pipeGS272W-B3

Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62

£14.95 (£17.94 inc VAT)

OEM: GS272, 70-1503, E1503, 70-0004

Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models - 1938-62 Inlet rocker box oil drain pipe and banjo assembly to fit all 500/650cc...

Quantity:

+ −

CODE: tapp7045-B13

Triumph Tappet Adjuster - T140 and TR7 Models From 1978 Onwards - UNF Thread

£2.95 (£3.54 inc VAT)

OEM: 71-7045, E17045

Triumph Tappet Adjuster - T140 and TR7 Models From 1978 Onwards - UNF Thread Rocker adjusting pin with allen key adjustment. Correct fitment on later T140...

Quantity:

+ −

CODE: bolt-set210-B14

Triumph Rocker Box Stud and Bolt Set - All T140 and TR7 Models

£19.95 (£23.94 inc VAT)

OEM: 21-1875, 60-4248, 21-2206, 14-1401, 70-3302, 14-0301

Triumph Rocker Box Stud and Bolt Set - All T140 and TR7 Models Rocker box to cylinder head stud and bolt set with UNC and UNF threads. Suitable for all...

Quantity:

+ −

CODE: pipeGS273-unbent-B3

Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent

£18.95 (£22.74 inc VAT)

OEM: GS273, 70-1504, E1504, 70-0005

Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Exhaust rocker box oil drain pipe and banjo assembly to fit all...

Quantity:

+ −

CODE: pipeGS272-unbent-B3

Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent

£19.95 (£23.94 inc VAT)

OEM: GS272, 70-1503, E1503, 70-0004

Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Inlet rocker box oil drain pipe and banjo assembly to fit all...

Quantity:

+ −

CODE: cap0209-B13

BSA Inlet Valve Stem Cap - B31 Models Circa 1946-60 + Iron Head B32 Models Circa 1949-53

£3.95 (£4.74 inc VAT)

OEM: 65-0209, 65-209

BSA Inlet Valve Stem Cap - B31 Models Circa 1946-60 + Iron Head B32 Models Circa 1949-53 Inlet valve stem cap to fit the 65-1511 inlet valve with 0.31"...

Quantity:

+ −

CODE: smallend1458-B8

BSA Bantam Small End Needle Roller Bearing - D10, D14 and B175 Models

£4.95 (£5.94 inc VAT)

OEM: 90-1458

BSA Bantam Small End Needle Roller Bearing - D10, D14 and B175 Models Connecting rod small end needle roller bearing suitable for Bantam D10, D14, B175 +...

Quantity:

+ −

CODE: tappet3976-B13

Triumph Cam Follower Tappet - T160 Models Circa 1975-76

£26.95 (£32.34 inc VAT)

OEM: 71-3976, E13976

Triumph Cam Follower Tappet - T160 Models Circa 1975-76 Single tappet / cam follower with oil hole, locates in the tappet block and follows the camshaft...

Quantity:

+ −

CODE: rod194W

Triumph Push Rod Cover Tube - Later OIF 650cc Models Circa 1969-72

£21.95 (£26.34 inc VAT)

OEM: 70-9349, E9349, 71-2575, E12575

Triumph Push Rod Cover Tube - Later OIF 650cc Models Circa 1969-72 Correct fitment on T120R, TR6R, TR6C models from 1969 onwards. Push rods and...

Options

CODE: tappet3059R-LFH

Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet

£39.95 (£47.94 inc VAT)

OEM: 71-7008, 70-3059, E17008, E3059, 70-3059R, 71-7644, E3059R, E17644

Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet Single cam follower, sits in the tappet block and follows the...

Options

CODE: rod063P

Triumph T140, TR7 Engine Pushrod - OEM: 71-3330

£4.95 (£5.94 inc VAT)

OEM: 71-3330

Triumph T140, TR7 - 750cc Engine Pushrod Pushrod, Push rod, Push-rod. Length 152mm Available as standard or UK made - please select option. OEM:...

Options

Save 11%

CODE: conrod-1310

BSA Bantam Conrod Kit - D1, D3, D5 and Early D7 Models - Circa 1954-64

£179.95 £159.95 (£191.94 inc VAT)

OEM: 90-1310, 90-130, 90-1385

BSA Bantam Conrod Kit - D1, D3, D5 and Early D7 Models - Circa 1954-64 Suitable for all Bantam models as listed above. Full connecting rod assembly...

Quantity:

+ −

CODE: stud3796-B19

Triumph Inlet Manifold Stud - Unit 350/500cc Models - Circa 1959-68 - Short Type

£1.95 (£2.34 inc VAT)

OEM: 70-3796, E3796

Triumph Inlet Manifold Stud - Unit 350/500cc Models - Circa 1959-68 - Short Type Short inlet manifold to cylinder head stud. Long type also available -...

Quantity:

+ −

CODE: nut4103-B14

Triumph Cylinder Head Sleeve Nut - T20 Tiger Cub Models Circa 1954-68

£1.95 (£2.34 inc VAT)

OEM: 70-4103, 70-5897, E4103, E5897

Triumph Cylinder Head Sleeve Nut - T20 Tiger Cub Models Circa 1954-68 Zinc plated cylinder head nut suitable for T15 Terrier and T20 Tiger Cub models....

Quantity:

+ −

CODE: dipstick0112-B4

BSA Bantam Gearbox Oil Filler Dipstick / Bolt - D1, D3, D5 and D7 Models

£7.95 (£9.54 inc VAT)

OEM: 90-0112, 90-112

BSA Bantam Gearbox Oil Filler Dipstick / Bolt - D1, D3, D5 and D7 Models Complete dipstick with threaded section, breather hole and oil level groove....

Quantity:

+ −

CODE: boltset-alloy-head-B14

BSA A7/A10 Alloy Head Cylinder Head Bolt Set - R, SR, SS

£27.95 (£33.54 inc VAT)

OEM: 67-1115, 67-1116, 67-283, 67-0283

BSA A7/A10 Alloy Head Cylinder Head Bolt Set - R, SR, SS Rocket, Super Rocket, SS, etc. 9 piece set. OEM: 67-1115, 67-1116, 67-283, 67-0283 Made in...

Quantity:

+ −

Save 13%

CODE: conrod-9733

BSA Bantam Conrod Kit - B175 and Bushman Models Circa 1969 Onwards

£149.95 £129.95 (£155.94 inc VAT)

OEM: 70-9733

BSA Bantam Conrod Kit - B175 and Bushman Models Circa 1969 Onwards Full connecting rod assembly includes: 1x Connecting rod 1x Small end needle bearing 1x...

Quantity:

+ −

Save 13%

CODE: conrod-1454

BSA Bantam Conrod Kit - D7, D10, D10A and D14 Models Circa 1957 Onwards

£149.95 £129.95 (£155.94 inc VAT)

OEM: 90-1454, 90-1619

BSA Bantam Conrod Kit - D7, D10, D10A and D14 Models Circa 1957 Onwards Suitable for all Bantam models as listed above. Full connecting rod assembly...

Quantity:

+ −

CODE: tapp6509

Triumph Timing Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Two Hole

£29.95 (£35.94 inc VAT)

OEM: 70-6509, E6509, 71-3211, E13211

Triumph Timing Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Two Hole Right hand / timing side twin hole alloy tappet guide block for...

Quantity:

+ −

CODE: tapp6508

Triumph Drive Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Single Hole

£29.95 (£35.94 inc VAT)

OEM: 70-6508, E6508, 71-3212, E13212

Triumph Drive Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Single Hole Left hand / drive side single hole alloy tappet guide block for...

Quantity:

+ −

CODE: nut2016-B14

Triumph Con Rod Big End Nut - Unit 650cc Twins + T150, TR25W and BSA B25 Models - Circa 1969-73

£3.95 (£4.74 inc VAT)

OEM: 21-2016, S2016, 60-3761, D3761, 21-0549, S549

Triumph Con Rod Big End Nut - Unit 650cc Twins + T150, TR25W and BSA B25 Models - Circa 1969-73 Self locking connecting rod nut - correct fitment on T120,...

Quantity:

+ −

CODE: nut0400-B18

Triumph Rocker Oil Feed Domed Nut - Unit 350/500cc Models Circa 1959-71 + T20 Tiger Cub

£1.95 (£2.34 inc VAT)

OEM: 97-0400, H400

Triumph Rocker Oil Feed Domed Nut - Unit 350/500cc Models Circa 1959-71 + T20 Tiger Cub Rocker oil feed line acorn nut - correct fitment on 3TA, 5TA, T90...

Quantity:

+ −

68-0665, Alpha Valve No. V253 - BSA Inlet Valve - A65, Lightning, Hornet, Thunderbolt, Spitfire Mk2 - Hepolite

CODE: valve101-B22

BSA Inlet Valve - A65, Lightning, Hornet, Thunderbolt, Spitfire Mk2 - Hepolite - 68-0665

£16.95 (£20.34 inc VAT)

OEM: 68-0665, V253

BSA Inlet Valve - A65, Lightning, Hornet, Thunderbolt, Spitfire Mk2 - Hepolite - 68-0665 Correct fitment on Lightning and Hornet models from 1966-67,...

Quantity:

+ −

CODE: fkcap031-F2

2" Non-Vented Petrol or Oil Tank Filler Cap - Chrome Plated

£23.95 (£28.74 inc VAT)

OEM: 82-3216, F3216

2" Non-Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel / oil cap without vent hole - push turn fit and integral cork seal. Will fit most...

Quantity:

+ −

CODE: rocker-006W-B4

Triumph Pre Unit Rocker Box Inspection Cap and Crankcase Filter / Sump Plug on Unit 350/500cc Models

£6.95 (£8.34 inc VAT)

OEM: 70-1564, E1564, 40-0968

Triumph Pre Unit Rocker Box Inspection Cap and Crankcase Filter / Sump Plug on Unit 350/500cc Models Rocker cover inspection cap on 500/650cc pre unit...

Options

CODE: capNT367-B4

Triumph Primary Chaincase Filler/Inspection Cap - Pre Unit Models Circa 1939-62

£13.45 (£16.14 inc VAT)

OEM: NT367, 99-3544

Triumph Primary Chaincase Filler/Inspection Cap - Pre Unit Models Circa 1939-62 Cast alloy chaincase oil filler plug embossed with 'USE LIGHTOIL -...

Quantity:

+ −

70-2874, E2874 - Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2874-B19

Triumph Long Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2874, E2874

Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile inner fixing cylinder head bolt as used on alloy...

Quantity:

+ −

70-2873, E2873 - Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2873-B19

Triumph Short Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2873, E2873

Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile outer fixing cylinder head bolt as used on alloy...

Quantity:

+ −

71-1707, E11707 - Triumph Push Rod Tube Collar / Sleeve - 500/650/750cc Twins From 1971 Onwards

CODE: seal1707

Triumph Push Rod Tube Collar / Sleeve - Unit 500/650/750cc Twins From 1971 Onwards

£3.95 (£4.74 inc VAT)

OEM: 71-1707, E11707

Triumph Push Rod Tube Collar / Sleeve - 500/650/750cc Twins From 1971 Onwards Zinc plates steel pushrod seal collar - locates between the tappet guide...

Quantity:

+ −

CODE: pist-16945

Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71

£39.95 (£47.94 inc VAT)

OEM: 40-0970, 70-7998, E7998, 16945

Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71 Suitable for 250cc singles with the square alloy barrel - B25, C25 and...

Select Options

CODE: 9914-W

Conrod Big End Bolt - Triumph 500/750cc Unit Twins + Triumph/BSA 250cc Unit Singles

£8.95 (£10.74 inc VAT)

OEM: 70-9914, E9914

Conrod Big End Bolt - Triumph 500/750cc Unit Twins + Triumph/BSA 250cc Unit Singles Connecting rod bolts as fitted to T100, TR5T models circa 1971-74...

Options

70-1545, E1545 - Triumph Rocker Box Corner Bolt - Pre Unit Iron Head 500/650cc Models Circa 1946-62

CODE: bolt1545-B19

Triumph Rocker Box Corner Bolt - Pre Unit 500/650cc Models Circa 1946-62

£2.95 (£3.54 inc VAT)

OEM: 70-1545, E1545

Triumph Rocker Box Corner Bolt - Pre Unit Iron Head 500/650cc Models Circa 1946-62 Rocker box to cylinder head bolt, correct fitment on 5T, 6T, TR6 and...

Quantity:

+ −

CODE: rocker006B-B4

Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models

£14.95 (£17.94 inc VAT)

OEM: 70-1564, E1564, 40-0968

Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models Premium quality polished billet alloy with hexagonal head...

Quantity:

+ −

CODE: rod3755-CP-B17

Triumph Pushrod Tube - Early Unit 350/500cc Models - Circa 1958-63

£19.95 (£23.94 inc VAT)

OEM: 70-3755, E3755

Triumph Pushrod Tube - Early Unit 350/500cc Models - Circa 1958-63 Stepped type as used on earlier 3TA, 5TA and T100 models circa 1958-63. Available...

Options

CODE: tapp3736-B13

Triumph Tappet Guide Block - Early Unit 350/500cc Models - Circa 1958-63

£17.95 (£21.54 inc VAT)

OEM: 70-3736, E3736

Triumph Tappet Guide Block - Early Unit 350/500cc Models - Circa 1958-63 Tappet guide block used for both inlet and exhaust on early unit 3TA, 5TA and...

Quantity:

+ −

CODE: inlet914-pair

Norton Commando Carb Conversion Alloy Inlet Manifolds - MK1 to Paired MK2 Amal Concentric

£27.95 (£33.54 inc VAT)

Norton Commando Carb Conversion Alloy Inlet Manifolds - MK1 to Paired MK2 Amal Concentric Pair of alloy inlet manifolds with balance tubes to convert...

Quantity:

+ −

CODE: pist285-G

BSA B44 Piston - Gandini - Slipper type - for BSA B44 441cc

£139.95 (£167.94 inc VAT)

OEM: 41-0793, 41-0797, 41-0797A, 41-0797B

BSA B44 Piston - Gandini - Slipper type GPM - for BSA B44 441cc One Slipper Piston for BSA B44 441cc models etc (1967-69). Supplied as 1 Piston, complete...

Select Options

CODE: oilcap9659-B4

Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models

£28.95 (£34.74 inc VAT)

OEM: 82-9659, F9659, 68-8368

Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models Complete cap and dipstick assembly - 2" chrome plated...

Quantity:

+ −

CODE: tappet8801-LFH

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980

£38.95 (£46.74 inc VAT)

OEM: 70-8801, E8801

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...

Options

Anti Wet Sump Oil Pipe Tap With Switch - Magneto Type

CODE: anti-sump-tap-switch-mag

Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems

£54.65 (£65.58 inc VAT)

Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems A solution to a frequent problem of wet sumping. On many of the older classic...

Options

CODE: clip6869-B13

Triumph Piston Gudgeon Pin Circlips (2) - Pre Unit and Unit 500/650cc Models + Unit Singles

£1.45 (£1.74 inc VAT)

OEM: 70-6869, E6869, 67-0101, WE479, 40-0979

Triumph Piston Gudgeon Pin Circlips (2) - Pre Unit and Unit 500/650cc Models + Unit Singles Gudgeon wristpin circlip - correct fitment on: Pre unit and...

Quantity:

+ −

CODE: nut8332-B13

BSA Oil Feed Pipe Gland Nut - B, C and M Group Models Circa 1940-62

£1.95 (£2.34 inc VAT)

OEM: 66-8332

BSA Oil Feed Pipe Gland Nut - B, C and M Group Models Circa 1940-62 Brass oil pipe nipple / union nut for 5/16" oil feed pipe - correct fitment on rigid...

Quantity:

+ −

CODE: pipe1547-B3

BSA Lower Rocker Oil Feed Pipe - Long Stroke A7, M33 + B Group Models Circa 1947-53

£13.45 (£16.14 inc VAT)

OEM: 65-1547, 65-1119

BSA Lower Rocker Oil Feed Pipe - Long Stroke A7, M33 + B Group Models Circa 1947-53 Correct fitment on long stroke A7, B31, B32, B33, B34 and M33 models...

Quantity:

+ −

70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103 - Triumph/BSA/Norton Rocker Spindle Thackery Spring Washer - Various Models

CODE: wash1574-B13

Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models

£1.45 (£1.74 inc VAT)

OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103

Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...

Quantity:

+ −

CODE: tapp1513A-B13

Triumph/BSA Mushroom Head Tappet Adjuster - Pre Unit + 650/750cc Unit Twins + A7 and A10 Models - 1946 On

£4.95 (£5.94 inc VAT)

OEM: 70-1513, E1513, 67-0056, 67-56

Triumph/BSA Mushroom Head Tappet Adjuster - Pre Unit + 650/750cc Unit Twins + A7 and A10 Models - 1946 On Rocker adjusting pin with mushroom head and hex...

Quantity:

+ −

CODE: r/box3668-B4

Triumph Inlet Rocker Box - T140 / TR7 - 750cc Twins From 1974 Onwards

£79.95 (£95.94 inc VAT)

OEM: 71-3668, E13668

Triumph Inlet Rocker Box - T140 / TR7 - 750cc Twins From 1974 Onwards Inlet side alloy rocker cover - correct fitment on T140 and TR7 models from 1974...

Quantity:

+ −

CODE: wash3302

Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models

£0.25 (£0.30 inc VAT)

OEM: 70-3302, E3302, 75-0214, 75-214, S21/91

Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...

Quantity:

+ −

CODE: wash2184

Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses

£0.95 (£1.14 inc VAT)

OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213

Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses As used extensively on various unit models - cylinder head bolts, frame parts + universal...

Quantity:

+ −

70-2982, E2982 - Triumph Rocker Box Corner Bolt - Unit Alloy Head 650cc Models Circa 1963-68

CODE: bolt2982-B19

Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68

£2.45 (£2.94 inc VAT)

OEM: 70-2982, E2982

Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68 Correct fitment on pre unit TR5 and T100 models circa...

Quantity:

+ −

CODE: valv-sprs-CP102-B17

Triumph Valve Spring Set - 650cc Pre Unit and Unit Models Circa 1959-65 - CP.102 White

£18.95 (£22.74 inc VAT)

OEM: CP.102, CP102, 70-3001, 70-3002, E3001, E3002

Triumph Valve Spring Set - 650cc Pre Unit and Unit Models Circa 1959-65 - CP.102 White White spot inner and outer valve springs, 4 of each - correct...

Quantity:

+ −

CODE: rocker008B-B4

Triumph Hexagonal Head Rocker Box Inspection Cap - Unit 350/500/650cc Models - Circa 1959-74

£14.95 (£17.94 inc VAT)

OEM: 70-3752, E3752, 70-4610, E4610, 71-2744, E12744

Triumph Hexagonal Head Rocker Box Inspection Cap - Unit 350/500/650cc Models - Circa 1959-74 Premium quality polished billet alloy rocker box inspection...

Quantity:

+ −

70-3223, E3223 - Triumph Tappet Adjuster - 350/500cc Unit Models Circa 1959-74 - 3/4" copper plated - allen socket

CODE: TP-3223-210

Triumph Tappet Adjuster - 350/500cc Unit Models Circa 1959-74 - Various Options Available

£4.95 (£5.94 inc VAT)

OEM: 70-3223, E3223

Triumph Tappet Adjuster - 350/500cc Unit Models - Circa 1959-74 - Various Options Rocker adjusting pin - correct fitment on unit 3TA, 5TA, T90 and T100...

Options

CODE: nut2922-B14

Conrod Big End Nut - Triumph Pre Unit and Unit 250/500/650cc Singles and Twins - Circa 1946-70

£1.95 (£2.34 inc VAT)

OEM: 70-2922, 70-1530, E2922, E1530

Conrod Big End Nut - Triumph Pre Unit and Unit 250/500/650cc Singles and Twins - Circa 1946-70 Self locking connecting rod nut - correct fitment on pre...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online