Engine & Transmission :: Engine Upper

CODE: oring727H

Triumph O Ring - Rocker Spindle - 60-3548, 70-3253

£0.95 (£1.14 inc VAT)

OEM: 60-3548, 70-3253, E3253

Rocker spindle O Ring for Triumph 200, 350, 500, 650 and 750cc models This o-ring is the little sucker that you replace to stop that oil leak from the...

Select Options

CODE: washer1335

Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug

£0.95 (£1.14 inc VAT)

OEM: 70-1335, E1335, 40-0159, 40-159

Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug Also used for the T140 oil in frame sump washer. OEM: 70-1335, E1335, 40-0159,...

Quantity:

+ −

CODE: tapp176-B18

Valve split cotters - valve collet - Triumph, BSA

£1.75 (£2.10 inc VAT)

OEM: 71-3748, 40-0167, 99-0067

Valve split cotters - valve collet - Triumph, BSA Triumph 500cc, 650cc, 750cc, T100, T120, T140, T150, T160. BSA 250cc, 750cc, C15, A75 Rocket 3. Price per...

Quantity:

+ −

CODE: nut036-B14

Triumph Twin - Cylinder Base Nut - P0172A

£0.75 (£0.90 inc VAT)

OEM: P0172A, S1-52, 21-7052, PO172A, PO-172A, 02-0046

Triumph Twin - Cylinder Base Nut - P0172A Also to secure top head stay to engine. 3/8" CEI OEM: P0172A, S1-52, PO172A, PO-172A, 02-0046

Quantity:

+ −

Anti Wet Sump Oil Pipe Tap With Switch - Magneto Type

CODE: anti-sump-tap-switch-mag

Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems

£54.65 (£65.58 inc VAT)

Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems A solution to a frequent problem of wet sumping. On many of the older classic...

Options

CODE: fkcap029-F2

2" Vented Petrol or Oil Tank Filler Cap - Chrome Plated

£22.95 (£27.54 inc VAT)

OEM: 90-8035

2" Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel/oil cap with offset vent - push turn fit and integral cork seal. Will fit most oil tanks...

Quantity:

+ −

CODE: seal541

Triumph Push Rod Seal - Top

£1.25 (£1.50 inc VAT)

OEM: 70-3547, E3547

White silicone push rod 'O' ring Suit some of the 650cc engines Fits the 3TA, 5TA, T100 and other 350/500cc unit engines. Square section o-ring seal OEM:...

Quantity:

+ −

CODE: oil-tap3-B3

Wet Sumping, Anti Sump, Oil Pipe Tap

£15.95 (£19.14 inc VAT)

Wet Sumping, Anti Sump, Oil Pipe Tap A solution to a frequent problem of wet-sumping. On many of the older classic bikes, the oil pump and/or...

Quantity:

+ −

CODE: seal538

Triumph T120, T140, TR7 Push Rod Seal - Bottom

£1.25 (£1.50 inc VAT)

OEM: 70-7310, E7310

Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Also suits some of the later 350/500cc engines (confused? -...

Quantity:

+ −

CODE: seal537

Triumph T120, T140, TR7 Push Rod Seal - Top

£1.25 (£1.50 inc VAT)

OEM: 71-1283

Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines O - ring OEM: 71-1283

Quantity:

+ −

CODE: seal237

Triumph T120, T140, TR7 Push Rod Seal (Square) - Bottom

£1.25 (£1.50 inc VAT)

OEM: 70-4752, E4752

Push rod cover tube square section seal for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Square Section Seal OEM: 70-4752, E4752

Quantity:

+ −

CODE: tapp731

Triumph Tappet Guide Block O Ring - 500/650/750cc Models

£0.55 (£0.66 inc VAT)

OEM: 70-8782, 70-7563, E8782, E7563

Triumph Tappet Guide Block O Ring - 500/650/750cc Models OD: 1" (25.4mm) ID: 7/8" (22.3mm) Thickness: 1/6" (1.9mm) Viton Rubber OEM: 70-8782,...

Quantity:

+ −

70-3751 - Triumph Rocker Cover Inspection Cap Washer

CODE: wash3751

Triumph Rocker Cover Inspection Cap Washer 70-3751

£0.75 (£0.90 inc VAT)

OEM: 70-3751

Triumph Rocker Cover Inspection Cap Washer Triumph Unit models OEM: 70-3751

Quantity:

+ −

CODE: bolt742-B14

Triumph 9 Piece Cylinder Head Bolt Set - 650cc

£23.95 (£28.74 inc VAT)

Triumph High Tensile 9 piece Cylinder Head Bolt Set for TR6/T120 Unit models. Suit most later Triumgh twin 650cc 1x 70-4771 Centre head bolt - 5/16" x 3" x...

Quantity:

+ −

CODE: gask1577

Triumph/BSA Fibre Washer - Sump Base Gasket, Rocker Box Gasket, Inspection Cap

£0.75 (£0.90 inc VAT)

OEM: 70-1577, E1577, 65-5800, E1564, 70-1564, 67-42, 67-0042, NT376

Triumph/BSA Fibre Washer - Sump Base Gasket, Rocker Box Gasket, Inspection Cap Fibre washer used extensively on Triumph and BSA models. Approximately...

Quantity:

+ −

CODE: conrod9525

Triumph Connecting Rod - All 650cc Unit Twins + Pre Unit 500/650cc Models From 1956 Onwards

£129.95 (£155.94 inc VAT)

OEM: 70-9525, E9525, 70-3606, E3606

Triumph Connecting Rod - All 650cc Unit Twins + Pre Unit 500/650cc Models From 1956 Onwards Forged alloy with steel connecting rod cap - supplied with...

Quantity:

+ −

CODE: tapp9352-B13

Triumph Tappet Guide Block - Inlet - 70-9352

£21.95 (£26.34 inc VAT)

OEM: 70-9352

Triumph 500cc, 650cc, 750cc, T100, T120, T140 inlet tappet guide block. OEM: 70-9352

Quantity:

+ −

82-0879, F879, GS662, 60-4264, 75-0053 - 1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting

CODE: nut0879-B14

Triumph/BSA Rocker Box Stud Nut / Oil Tank Mounting - 1/4" CEI

£1.25 (£1.50 inc VAT)

OEM: 82-0879, F879, GS662, 60-4264, 75-0053

1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting + Other Uses Used extensively on many Triumph unit models. Rocker box stud nut on...

Quantity:

+ −

CODE: tapp0200H-B18

Triumph Tappet Guide Block Set Bolt - 350/500/650/750cc Models

£2.45 (£2.94 inc VAT)

OEM: 97-0200, H200

Triumph Tappet Guide Block Set Bolt - 350/500/650/750cc Models Pre-unit and unit models including 3TA, 5T, 6T, TR5, 5TA, T100, T110, T120, T140. OEM:...

Quantity:

+ −

Save 33%

CODE: tapp9353-B13

Triumph Tappet Guide Block - Exhaust - 70-9353

£29.95 £19.95 (£23.94 inc VAT)

OEM: 70-9353

Triumph 500cc, 650cc, 750cc, T100, T120, T140 exhaust tappet guide block. OEM: 70-9353

Quantity:

+ −

70-1496, E1496 - Triumph Bottom Push Rod Tube O Ring Seal

CODE: seal542

Triumph Bottom Push Rod Tube O Ring Seal - 70-1496

£1.45 (£1.74 inc VAT)

OEM: 70-1496, E1496

Triumph Bottom Push Rod Tube O Ring Seal - 70-1496 Bottom joint washer for various pre unit and unit 650cc twins. OD: 1+1/4" (31.4mm) ID: 15/16"...

Quantity:

+ −

CODE: pist037

Hepolite Pistons for Triumph T120 650cc

£82.95 (£99.54 inc VAT)

OEM: 70-6868, E6868, 17844

Pair of Hepolite Pistons for Triumph T120 650cc models etc (1959-75). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

Select Options

CODE: pist278

Hepolite Pistons for BSA A65 650cc

£82.95 (£99.54 inc VAT)

OEM: 68-0784

Pair of Hepolite Pistons for BSA A65 650cc models etc (1962-73). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore Size...

Select Options

CODE: rocker-006W-B4

Triumph Pre Unit Rocker Box Inspection Cap and Crankcase Filter / Sump Plug on Unit 350/500cc Models

£6.95 (£8.34 inc VAT)

OEM: 70-1564, E1564, 40-0968

Triumph Pre Unit Rocker Box Inspection Cap and Crankcase Filter / Sump Plug on Unit 350/500cc Models Rocker cover inspection cap on 500/650cc pre unit...

Options

CODE: valv255-B17

Valve Spring Set - Triumph T120, T140, TR6, TR7

£17.95 (£21.54 inc VAT)

OEM: 70-4221, 70-7400, 99-7037, E4221, E7400

Valve Spring Set - Triumph T120, T140, TR6, TR7 650cc, 750cc Twin (1963-) OEM: 70-4221, 70-7400, 99-7037, E4221, E7400

Quantity:

+ −

CODE: bolt741-B14

Triumph 8 piece Cylinder Head Bolt Set - 650cc pre-unit

£21.95 (£26.34 inc VAT)

OEM: E2873, 70-2873, E2874, 70-2874, E1596A, 70-1596A

Triumph High Tensile Alloy 8 piece Cylinder Head bolt set for Triumph T110/T120 Pre-unit models (1957-62). Suit most early Triumph twin 650cc OEM: E2873,...

Quantity:

+ −

CODE: valvecollar1543-B13

Triumph Valve Spring Top Collar - 650/750cc Twins - 1963-82

£5.45 (£6.54 inc VAT)

OEM: 70-1543, E1543

Triumph Valve Spring Top Collar - 650/750cc Twins - 1963-82 Triumph various models, valve spring retaining collar, sits on top of the valve spring with...

Quantity:

+ −

CODE: clip732m-B18

Valve Guide Circlip - Triumph/BSA - 70-3209

£1.25 (£1.50 inc VAT)

OEM: 70-3209

Valve Guide Circlip as fitted to Triumph T140, T100, T20 and BSA C15 models. OEM: 70-3209

Quantity:

+ −

CODE: pipe551-B3

BSA A7, A10 Engine Oil Feed Pipes - OEM: 42-8346, 42-8347

£39.95 (£47.94 inc VAT)

OEM: 42-8346, 42-8347

BSA A7, A10 armoured oil feed pipes Exact replica of genuine pipes Comes as 2 pipes, approx 17" and 18" long, ready to fit OEM: 42-8346, 42-8347

Quantity:

+ −

CODE: pist508

JP Pistons for AJS 16M 350cc or Matchless G3 350cc

£129.95 (£155.94 inc VAT)

One JP Piston for AJS 16M 350cc or Matchless G3 350cc 1954-1964 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 69mm...

Select Options

CODE: rod2620-B17

Triumph Push Rod - 500/650cc Pre Unit and 650cc Unit Models From 1939-73

£10.95 (£13.14 inc VAT)

OEM: 70-2620

Triumph Push Rod - 500/650cc Pre Unit and 650cc Unit Models From 1939-73 Correct fitment for all pre-unit Triumph 500/650cc models 5T, T100, 6T, T110,...

Quantity:

+ −

CODE: piston9488

Harris Pistons for Triumph T120/TR6 650cc - 70-9488

£99.95 (£119.94 inc VAT)

OEM: 70-9488, 70-6868

Harris Pistons for Triumph T120/TR6 650cc - 70-9488 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...

Select Options

CODE: tappet3059R-LFH

Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet

£39.95 (£47.94 inc VAT)

OEM: 71-7008, 70-3059, E17008, E3059, 70-3059R, 71-7644, E3059R, E17644

Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet Single cam follower, sits in the tappet block and follows the...

Options

CODE: pist1192

Gandini/GPM Piston - BSA M20 - 500cc Single

£121.95 (£146.34 inc VAT)

OEM: 66-1192

Gandini/GPM Piston - BSA M20 - 500cc Single Supplied as 1 Piston, complete with rings, gudgeon pin and circlips 2x 3/32" Piston rings - 1st & 2nd...

Select Options

CODE: pist100

Hepolite Pistons for Triumph T100 500cc Daytona (9-1) 1968-74

£82.95 (£99.54 inc VAT)

OEM: 70-6884, 70-6884/20, 70-6884/40, E6884, E6884/20, E6884/40

Pair of Hepolite Pistons for Triumph T100 500cc Daytona models (1968-74). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips....

Select Options

CODE: rings035

Hepolite Piston Rings for Triumph T140/TR7 750cc

£35.95 (£43.14 inc VAT)

OEM: R26490

Pair of Hepolite Piston Rings for Triumph T140/TR7 750cc models (1972-). Supplied as 2 set of Hepolite Piston rings. Bore Size : 76mm Standard, available...

Select Options

CODE: wash1575-B13

Triumph/BSA Rocker Spindle Thrust Washer - Various Models

£0.75 (£0.90 inc VAT)

OEM: 70-1575, 40-0158, E1575, 40-158

Triumph/BSA Rocker Spindle Thrust Washer - Various Models As used on many BSA models including A7, A10, A50, A65, B25, B44, B40 and C15. Plus...

Quantity:

+ −

CODE: gear007H-B4

Triumph / BSA - Gearbox Inspection Plug / Chaincase Filler Cap - Singles, Twins and Triples

£4.45 (£5.34 inc VAT)

OEM: 57-2166, 70-8231, E732, 70-0732

Triumph / BSA - Gearbox Inspection Plug / Chaincase Filler Cap - Singles, Twins and Triples BSA all unit singles chain case A50, A65. Triumph 3TA, 5TA,...

Quantity:

+ −

CODE: piston3676

Harris Pistons for Triumph T140 750cc - 71-3676

£104.95 (£125.94 inc VAT)

OEM: 71-3676

Harris Pistons for Triumph T140 750cc - 71-3676 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring set...

Select Options

CODE: pist035

Hepolite Pistons for Triumph T140/TR7 750cc

£82.95 (£99.54 inc VAT)

OEM: OEM: 71-3778, 71-3686, 71-3687, 71-3689, 19255

Pair of Hepolite Pistons for Triumph T140/TR7 750cc models (1972-). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

Select Options

CODE: wash9554

Triumph Intake Manifold Carburettor Insulating Rubbber Washer - 650/750cc Unit Twins

£0.35 (£0.42 inc VAT)

OEM: 70-9554, E9554

Triumph Intake Manifold Carburettor Insulating Rubbber Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from...

Quantity:

+ −

CODE: pist3958

Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM

£119.95 (£143.94 inc VAT)

OEM: 70-3958, E3958, CP172

Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM Supplied as 1 piston, complete with rings, gudgeon pin...

Select Options

CODE: pipe248

BSA A7, A10, B31, B33 Rocker Oil Feed Pipe

£21.95 (£26.34 inc VAT)

OEM: 42-0048, 42-48

BSA A7, A10 Rocker oil feed pipe complete. Ariel Huntmaster 650cc Also BSA B31, B33 swing arm models pipe diameter: 3/16" OEM: 42-0048, 42-48

Quantity:

+ −

CODE: inlet639-pair

Webco Style Single to Twin Carb Conversion Inlet Manifolds - Triumph Pre Unit and Unit 650cc Models

£26.95 (£32.34 inc VAT)

Webco Style Single to Twin Carb Conversion Inlet Manifolds - Triumph Pre Unit and Unit 650cc Models Convert from single to twin carb using this pair of...

Quantity:

+ −

CODE: nut056H-B18

Triumph 500/650cc Rocker Oil Feed Dome Nut

£3.95 (£4.74 inc VAT)

OEM: 70-1435

Triumph T120, TR6 etc Rocker spindle domed nut, as used on all Triumph 500,600cc twins up to (-1968). OEM: 70-1435

Quantity:

+ −

CODE: nut3761-B14

Lester Nut Triumph T100, T120, T140, BSA B25

£1.35 (£1.62 inc VAT)

OEM: 60-3761, D3761

Triumph T100/T120 and T140/T100 Lester nut UNF (Later models). Also fits BSA B25. OEM: 60-3761, D3761

Quantity:

+ −

CODE: wash2184

Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses

£0.95 (£1.14 inc VAT)

OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213

Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses As used extensively on various unit models - cylinder head bolts, frame parts + universal...

Quantity:

+ −

CODE: rocker010-B4

Chrome Triumph Rocker Cover Caps - set of 4

£16.95 (£20.34 inc VAT)

OEM: 70-4610

Chrome Triumph Rocker Cover Caps - set of 4 Suitable for Triumph. Unit Triumph. Complete with washers. Thread diameter approx 1+3/16" (30mm) OEM: 70-4610

Quantity:

+ −

CODE: seal7363-B13

Valve Seal - Triumph - 60-7363

£1.95 (£2.34 inc VAT)

OEM: 60-7363, 06-2726, D7363, 062726

Valve Guide Oil Seal - Triumph/Norton - 60-7363, 06-2726 Inlet valve guive valve seal, as fitted to Triumph T140, Norton Commando and other models Valve...

Quantity:

+ −

CODE: vvg421

Triumph Complete Valve Guide Set - T100, 100C, 100S Models

£99.95 (£119.94 inc VAT)

OEM: 70-6301, 70-6853, 70-6854, E6301, E6853, E6854

Triumph Complete Valve Guide Set - T100, 100C, 100S Models Includes guides and valves suitable for 500cc models circa 1967-73. Valve guides: Set of 4...

Quantity:

+ −

CODE: vvg402

BSA A65 Complete Valve + Guide set - Bronze Guides

£99.95 (£119.94 inc VAT)

OEM: 68-0809, 68-0665, 68-0663

BSA A65 (1966-69) Models Complete Valve Guide set. Includes bronze guides, and valves. Valve Guides : Set of 4 Bronze Guides (68-0809) Valves : Set of 4...

Quantity:

+ −

CODE: valvecollar6439-B13

Valve Spring Bottom Collar - Triumph - 70-6439

£4.95 (£5.94 inc VAT)

OEM: 70-6439, E6439

Valve Spring Bottom Collar - Triumph - 70-6439 Triumph various models, valve spring retaining collar, sits under the valve spring between the spring and...

Quantity:

+ −

CODE: pist032-tri

Hepolite Pistons for Triumph Trident T150/T160 750cc

£124.95 (£149.94 inc VAT)

OEM: 70-9741, 70-9761, 70-9762, 70-9763, 70-9764

Set of Hepolite Pistons for Triumph Trident T150/T160 750cc. Supplied as 3 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore Size :...

Select Options

CODE: 9914-W

Conrod Big End Bolt - Triumph 500/750cc Unit Twins + Triumph/BSA 250cc Unit Singles

£8.95 (£10.74 inc VAT)

OEM: 70-9914, E9914

Conrod Big End Bolt - Triumph 500/750cc Unit Twins + Triumph/BSA 250cc Unit Singles Connecting rod bolts as fitted to T100, TR5T models circa 1971-74...

Options

70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103 - Triumph/BSA/Norton Rocker Spindle Thackery Spring Washer - Various Models

CODE: wash1574-B13

Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models

£1.45 (£1.74 inc VAT)

OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103

Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...

Quantity:

+ −

CODE: wash9555

Triumph Intake Manifold Carburettor Cupped Washer - 650/750cc Unit Twins

£0.95 (£1.14 inc VAT)

OEM: 70-9555, E9555

Triumph Intake Manifold Carburettor Cupped Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from 1970-78....

Quantity:

+ −

CODE: valve2900

Triumph Exhaust Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize

£9.45 (£11.34 inc VAT)

OEM: E2900, 70-2900, G424

Triumph Exhaust Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59, TR5 models...

Select Options

CODE: bolt-set3797-B14

Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70

£67.95 (£81.54 inc VAT)

OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302

Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...

Quantity:

+ −

CODE: pipe4159

Triumph T120, TR6 Rocker Oil Feed Pipe - 70-4159

£21.95 (£26.34 inc VAT)

OEM: 70-4159, E4159, 70-3082, E3082, 70-6349, E6349

Triumph T120/TR6, 650cc Rocker Oil Feed Pipe Available as standard or UK made - please select option. Can be used instead of 71-2428, E12428, 70-6349,...

Select Options

CODE: valve2899

Triumph Inlet Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize

£9.45 (£11.34 inc VAT)

OEM: E2899, 70-2899, E1480, 70-1480, G420

Triumph Inlet Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59, TR5 models circa...

Select Options

CODE: seal3758

Triumph Push Rod Seal - Bottom - 5TA, 3TA, T100A - OEM 70-3758, E3758

£1.25 (£1.50 inc VAT)

OEM: 70-3758, E3758

Triumph Push Rod Seal - Bottom To fit 5TA, 3TA, T100A models from 1957-1963 OEM 70-3758, E3758

Quantity:

+ −

CODE: valve033-B22

BSA Exhaust Valve B33, B34, M33 from 1946-58 - 65-1240

£19.95 (£23.94 inc VAT)

OEM: 65-1240, V98

BSA Exhaust Valve B33, B34, M33 from 1946-58 - 65-1240 Hepolite exhaust valve Head Diameter: 1+9/32", 1.600 (40.6mm) Stem Diameter: 3/8", 0.3730 (9.5mm)...

Quantity:

+ −

E3208, 70-3208, G461 - Triumph Inlet / Exhaust Valve Guide - T20 Tiger Cub + 350/500cc Twins Circa 1957-66

CODE: vguide3208t

Triumph Inlet / Exhaust Valve Guide - T20 Tiger Cub + 350/500cc Twins Circa 1957-66 - Standard or Oversize

£9.45 (£11.34 inc VAT)

OEM: E3208, 70-3208, G461

Triumph Inlet / Exhaust Valve Guide - T20 Tiger Cub + 350/500cc Twins Circa 1957-66 - Standard or Oversize Suitable for both inlet and exhaust on many...

Select Options

CODE: conrod1450H-B21

Triumph Small Journal Conrod / Connecting Rod - Pre Unit 500/650cc Models Circa 1938-56

£129.95 (£155.94 inc VAT)

OEM: 70-1450, E1450

Triumph Small Journal Conrod / Connecting Rod - Pre Unit 500/650cc Models Circa 1938-56 Forged alloy with steel caps as originally used on 5T, 6T, T100,...

Quantity:

+ −

CODE: rings037

Hepolite Piston Rings for Triumph T120 650cc Models - Circa 1959-75

£35.95 (£43.14 inc VAT)

OEM: R11050, E6864, E6865, 70-6864, E6865

Pair of Hepolite Piston Rings for Triumph T120 650cc models etc (1959-75). Supplied as 2 set of Hepolite Piston Rings. Bore Size : 71mm Standard, available...

Select Options

CODE: pist315

JP Pistons for Triumph 3TA/T21 350cc

£275.95 (£331.14 inc VAT)

Pair of JP pistons for Triumph 3TA/T21 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.24mm Standard,...

Select Options

CODE: vvg424

Triumph T120, TR6 Complete Valve Guide set (to DU44394)

£99.95 (£119.94 inc VAT)

OEM: 70-3827, 70-3828, 70-4603, 70-2904

Triumph T120 (1963-72), TR6 (1966-72) 650cc, Complete Valve guide set. To Engine No. DU44394 Includes Bronze guides, and valves. Valve Guides : Set of 4...

Quantity:

+ −

CODE: pist278r

Hepolite Piston Rings for BSA A65 650cc (1962 - 73)

£44.95 (£53.94 inc VAT)

OEM: R17350

Set of Hepolite Piston Rings for BSA A65 650cc models etc (1962-73). Supplied as Hepolite Rings for 2 Pistons. Bore Size : 75mm Standard, available as STD,...

Select Options

CODE: pist1660

Gandini/GPM Piston - BSA B33/M33 Short Con Rod Models - Circa 1952-60

£121.95 (£146.34 inc VAT)

OEM: 65-1660, 65-1662, 65-1664

Gandini/GPM Piston - BSA B33/M33 Short Con Rod Models - Circa 1952-60 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 3/32"...

Select Options

CODE: oilcap9659-B4

Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models

£28.95 (£34.74 inc VAT)

OEM: 82-9659, F9659, 68-8368

Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models Complete cap and dipstick assembly - 2" chrome plated...

Quantity:

+ −

CODE: pipe3655-F3

Triumph Oil Filter Union Nut and Connector Pipe - Pre Unit and Unit Models - 1954 Onwards

£3.95 (£4.74 inc VAT)

OEM: 82-3655, 82-3182, F3655, F3182

Triumph Oil Filter Union Nut and Connector Pipe - Pre Unit and Unit Models - 1954 Onwards Pipe locates between the rubber oil feed pipe and the oil...

Quantity:

+ −

CODE: piston3615

Harris Pistons for Pre-Unit Triumph T100 500cc - 70-3615

£82.95 (£99.54 inc VAT)

OEM: 70-3615

Harris Pistons for Pre-Unit Triumph T100 500cc - 70-3615 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin,...

Select Options

CODE: bolt401-B19

Triumph 650cc/750cc Twin - Cylinder Head Stud - 14-1401

£1.95 (£2.34 inc VAT)

OEM: 14-1401

Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401

Quantity:

+ −

70-4008 - Triumph T100/5TA Engine Pushrod

CODE: rod4008-B17

Triumph T100/5TA Pushrod - OEM: 70-4008

£3.95 (£4.74 inc VAT)

OEM: 70-4008

Triumph T100/5TA Engine Pushrod As fitted to all 500cc Unit construction Twins (1958-74) Length approx 120-125mm Made in England by LF Harris OEM:...

Select Options

CODE: valv227-B17

Valve Spring Set - Triumph 5T, TR5, T100, 6T, TR6, T120 - 99-3700

£13.95 (£16.74 inc VAT)

OEM: VS510, 99-3700, E1487, E1488, 70-1487, 70-1488

Valve Spring Set - Triumph 5T, TR5, T100, 6T, TR6, T110 (racing models) & T120 (1959-60). 8 Springs. Terry No VS510 Includes 4 outer springs and 4...

Quantity:

+ −

Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt)

CODE: bolt716-B19

Triumph 650cc Twin - Cylinder Head Bolt

£3.45 (£4.14 inc VAT)

OEM: 70-0327

Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt) OEM: 70-0327

Quantity:

+ −

Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension)

CODE: bolt660-B19

Triumph 650cc Twin - Cylinder Head Bolt with Torque Stay

£3.95 (£4.74 inc VAT)

OEM: 70-1596

Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension) OEM: 70-1596

Quantity:

+ −

CODE: pist288

JP Pistons for BSA A10 Super Rocket 650cc

£279.95 (£335.94 inc VAT)

Set of JP Pistons for BSA A10 Super Rocket 650cc models etc (1952-63). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size...

Select Options

CODE: valve0236-B22

BSA M20, M21 Exhaust Valve - 66-0236

£33.95 (£40.74 inc VAT)

OEM: 66-0236

BSA M20, M21 Exhaust Valve Alpha valve number V20 Made in England OEM: 66-0236

Quantity:

+ −

CODE: liner333

Hepolite Triumph T100 Alloy Cylinder Liner

£49.95 (£59.94 inc VAT)

OEM: FS.2543, 70-3592

Hepolite Triumph T100 Alloy Cylinder Liner for pre unit models. Made in England. Hepolite FS.2543 Bore size : 2.4803" (63mm) OEM: FS.2543, 70-3592 Allows you...

Quantity:

+ −

CODE: vvg400

BSA A10 Iron Head Complete Valve Guide set - Cast Iron Guides

£99.95 (£119.94 inc VAT)

OEM: 67-0031, 67-0323, 67-0324, 67-0742, 67-0743

BSA A10 Iron Head models Complete Valve Guide Set (1949-62). Includes Guides and Valves. Valve Guides : Set of 4 Cast Iron Guides (67-0031) OEM: 67-0031,...

Quantity:

+ −

CODE: valv256-B17

Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards

£15.95 (£19.14 inc VAT)

OEM: 70-4011, 70-5946, E4011

Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards Correct fitment on 3TA, T90, 5TA and T100 models circa 1966-73. OEM: 70-4011,...

Quantity:

+ −

CODE: rod3329-B17

Triumph 750cc Twin Pushrod Tube - T140, TR7 Models Circa 1973-78

£18.95 (£22.74 inc VAT)

OEM: 71-3329, E13329

Triumph 750cc Twin Pushrod Tube - T140, TR7 Models Circa 1973-78 Correct fitment on earlier 750cc twins from 1973-78. Chrome plated - made in England....

Quantity:

+ −

CODE: rod1505-B17

Triumph Pushrod Tube - Pre Unit Iron Head Models - Circa 1938-62

£18.95 (£22.74 inc VAT)

OEM: 70-1505, E1505

Triumph Pushrod Tube - Pre Unit Iron Head Models - Circa 1938-62 Push rod tube, with oil drain hole. Fits pre-unit 5T, T100, 6T, T110, T120 models with...

Select Options

CODE: pist256

JP Pistons for BSA B34 Goldstar 500cc

£145.95 (£175.14 inc VAT)

One JP Piston for BSA B34 Goldstar 500cc models etc (1954-59). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 85mm...

Select Options

CODE: piston1563

Harris Pistons for Pre-Unit Triumph 5T 500cc - 70-1563

£89.95 (£107.94 inc VAT)

OEM: 70-1563, E1563

Harris Pistons for Pre-Unit Triumph 5T 500cc - 70-1563 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...

Select Options

CODE: tapp070H-B18

Triumph / BSA Hexagonal Tappet Adjuster - OEM: 70-1513

£4.95 (£5.94 inc VAT)

OEM: 70-1513, 67-0056

Hexagonal Tappet Adjuster - Triumph T120/T140 and BSA A7/A10 CEI thread Approx diameter across thread = 5/16" (8mm) OEM: 70-1513, 67-0056

Quantity:

+ −

Gandini/GPM Pistons - BSA 650cc A10 Models - Circa 1951-62 - 67-0594, 67-594, Hepolite No. 3650

CODE: pist0594

Gandini/GPM Pistons - BSA 650cc A10 OHV Models - Circa 1951-62

£224.95 (£269.94 inc VAT)

OEM: 67-0594, 67-594, Hepolite No. 3650

Gandini/GPM Pistons - BSA 650cc A10 OHV Models - Circa 1951-62 Supplied as 2 pistons, complete with rings, gudgeon pins and circlips. Each piston...

Select Options

CODE: nut066M-B14

Con Rod Big End Nut BSA A7, A10

£2.95 (£3.54 inc VAT)

OEM: 67-1537

BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537

Quantity:

+ −

CODE: bolt014-B19

Con Rod Big End Bolt Triumph T120

£8.95 (£10.74 inc VAT)

OEM: 70-6576, 21-2016, 70-2490, E2490, E6576

BIG END BOLT - Triumph Triumph Big end bolt, T120/TR6/6T and others Thread: 5/16" UNF - 24 TPI Note - the correct nut that fits this is 60-3761 see link...

Quantity:

+ −

CODE: crod383-Billet

Triumph T100/T120 Pre Unit, T120 Unit ,TR6/T110 (1956-) Connecting Rod

£204.95 (£245.94 inc VAT)

OEM: 70-9525, 70-3606

Triumph T100/T120 Pre Unit, T120 Unit ,TR6/T110 (1956-) Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston....

Quantity:

+ −

CODE: pist282

JP Pistons for BSA B50 500cc

£139.95 (£167.94 inc VAT)

One JP Piston for BSA B50 500cc models etc (1971-). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 84mm Standard,...

Select Options

CODE: pist509

JP Pistons for AJS 18 500cc or Matchless G80 500cc 1956-59

£144.95 (£173.94 inc VAT)

One JP Piston for AJS 18 500cc or Matchless G80 500cc 1956-1959 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 82.5mm...

Select Options

70-2891, 70-2891/20, 70-2891/40, 70-2891/60

CODE: piston2891

Harris Pistons for Pre-Unit Triumph 6T thunderbird 650cc - 70-2891

£86.95 (£104.34 inc VAT)

OEM: 70-2891

Harris Pistons for Pre-Unit Triumph 6T thunderbird 650cc - 70-2891 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons,...

Select Options

CODE: rings032

Hepolite Piston Rings for Triumph Trident T150/T160 750cc

£59.95 (£71.94 inc VAT)

OEM: R23020

Set of Hepolite Piston Rings for Triumph Trident T150/T160 750cc. Supplied as 3 sets Hepolite Piston rings. Bore Size : 67mm Standard, available as +.020,...

Select Options

CODE: pist295

JP Pistons for BSA C11, C12 250cc

£149.95 (£179.94 inc VAT)

One JP Piston for BSA C11, C12 250cc models etc (1939-58). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 63mm...

Select Options

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online