Engine & Transmission :: Engine Lower

CODE: screw1926-B13

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72

£2.45 (£2.94 inc VAT)

OEM: 21-1926, S1926

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72 Correct fitment on T90 and T100 models circa 1969-72. Two required per engine -...

Quantity:

+ −

CODE: bearing0732-F4

BSA/Triumph Crankshaft Main Bearing - BSA C Group Circa 1946-58 + Unit Singles

£7.95 (£9.54 inc VAT)

OEM: 24-0732, 24-732, 70-8003, E8003

BSA/Triumph Crankshaft Main Bearing - BSA C Group Circa 1946-58 + Unit Singles Deep groove open type ball bearing - drive side and/or timing side,...

Quantity:

+ −

CODE: plug1112-B18

Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models - Circa 1959-68

£4.95 (£5.94 inc VAT)

OEM: 57-1112, T1112

Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...

Quantity:

+ −

CODE: spindle0375-B18

Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982

£7.45 (£8.94 inc VAT)

OEM: 70-0375, E375

Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982 Spindle for intermediate timing gear as fitted to all...

Quantity:

+ −

CODE: bolt6220-B14

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220

£1.25 (£1.50 inc VAT)

OEM: 14-6220

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220 As used on various Triumph models - crankcase clamping bolt on unit twins and triples circa...

Quantity:

+ −

CODE: wash3300-B13

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82

£4.95 (£5.94 inc VAT)

OEM: 70-3300, E3300

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...

Quantity:

+ −

CODE: bearing0011-F4

BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles

£3.45 (£4.14 inc VAT)

OEM: 90-0011, 90-11, 70-8151, E8151

BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles C10L and C12 4 speed models + Bantam D1, D3, D5, D7, D10, D14 and B175...

Quantity:

+ −

70-0400, E400 - Triumph Timing Gear Intermediate Wheel Bush - All Pre Unit and Unit Twins - Circa 1946-1982

CODE: bush0400-B8

Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982

£5.95 (£7.14 inc VAT)

OEM: 70-0400, E400

Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982 Correct fitment on all 350/500/650/750cc pre unit and unit twins...

Quantity:

+ −

CODE: c/s-tube3903-B13

Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82

£9.95 (£11.94 inc VAT)

OEM: 70-3903, E3903, 68-0185, 68-185

Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...

Quantity:

+ −

CODE: pmp7317-B13

Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards

£79.95 (£95.94 inc VAT)

OEM: 71-7317, E17317

Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards Complete four valve oil pump assembly with pump...

Quantity:

+ −

CODE: spring0403-B18

Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards

£0.45 (£0.54 inc VAT)

OEM: 70-0403, E403

Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards Locates within the screwed plugs in the bottom of the pump under the valve...

Quantity:

+ −

CODE: cover7318

Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81

£119.95 (£143.94 inc VAT)

OEM: 71-7318, E17318, 70-4567, E4567, 70-8797, E8797, 70-9246, E9246, 71-7042, E17042

Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81 Polished alloy timing cover compatible with either a 2 valve or 4 valve oil pump....

Quantity:

+ −

CODE: 7-32-ball-F4

7/32" Ball Bearing - Single Ball - Universal Use

£0.25 (£0.30 inc VAT)

OEM: S70-7, 60-2363, D2363, 70-8019, E8019

7/32" Ball Bearing - Single Ball - Universal Use Diameter: 7/32" (5.6mm) As used in all standard dual or 4 valve oil pump assemblies on Triumph pre unit...

Quantity:

+ −

CODE: pipeset7013-B3

Triumph Oil Junction Block - 750cc Twins Circa 1976-78

£15.95 (£19.14 inc VAT)

OEM: 71-7013, E17013

Triumph Oil Junction Block - 750cc Twins Circa 1976-78 Nickel plated steel oil pipe assembly that feeds and returns oil to and from the oil pump at the...

Quantity:

+ −

CODE: screw1647-B13

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62

£2.95 (£3.54 inc VAT)

OEM: 70-1647, E1647

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, T100, TR5, 6T, T110, TR6...

Quantity:

+ −

CODE: stud0456-B18

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62

£2.45 (£2.94 inc VAT)

OEM: 57-0456, T456

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...

Quantity:

+ −

CODE: wash8754

Triumph/BSA/Norton Oil Pressure Release Valve Body Fibre Washer - All Valve Types

£0.65 (£0.78 inc VAT)

OEM: 70-8754, E8754, GS254, 70-9738, E9738, NMT2057, NMT2058, 06-7541

Triumph/BSA/Norton Oil Pressure Release Valve Body Fibre Washer - All Valve Types Locates between the valve body, piston, spring and cap. Suitable for all...

Quantity:

+ −

70-1670, E1670, 06-7542, 67-1499 - Triumph/BSA/Norton Oil Pressure Release Valve Fibre Washer - All Valve Types

CODE: wash1670

Triumph/BSA/Norton Oil Pressure Release Valve / Timing Cover Fibre Washer - All Valve Types

£0.45 (£0.54 inc VAT)

OEM: 70-1670, E1670, 06-7542, 67-1499

Triumph/BSA/Norton Oil Pressure Release Valve Fibre Washer - All Valve Types Locates between the valve body and the timing cover / crankcase. Suitable for...

Quantity:

+ −

CODE: stud4088-B14

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70

£3.95 (£4.74 inc VAT)

OEM: 68-4088

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70 Locates at the front of the frame between the two down tubes - correct fitment on...

Quantity:

+ −

CODE: nut2228-B13

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 70-2228, E2228

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...

Quantity:

+ −

CODE: pmp-gear0603-B18

BSA/Triumph Oil Pump Drive Gear - Unit Singles From 1966 Onwards

£53.95 (£64.74 inc VAT)

OEM: 41-0603, 41-603, 70-8094, E8094

BSA/Triumph Oil Pump Drive Gear - Unit Singles From 1966 Onwards Oil pump spindle gear - correct fitment on unit singles: B25 and B50 models from 1969...

Quantity:

+ −

CODE: gk3763

Triumph Oil Junction Block Gasket - 350/500/650cc Unit Twins Circa 1959-70 - 3 Hole

£0.95 (£1.14 inc VAT)

OEM: 70-3763, E3763

Triumph Oil Junction Block Gasket - 350/500/650cc Unit Twins Circa 1959-70 - 3 Hole 4 hole version also available - see related products. OEM: 70-3763,...

Quantity:

+ −

CODE: seal289

BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards

£1.95 (£2.34 inc VAT)

OEM: 40-0679, 70-8153, E8153

BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...

Quantity:

+ −

CODE: wash7971

BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles

£0.75 (£0.90 inc VAT)

OEM: 29-7971, 82-9070, F9070

BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles Fibre washer locates between the oil tank filter and oil feed pipe/banjo....

Quantity:

+ −

CODE: dowel1535-B13

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62

£2.45 (£2.94 inc VAT)

OEM: 70-1535, E1535

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...

Quantity:

+ −

CODE: circlip2240-B13

BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63

£1.95 (£2.34 inc VAT)

OEM: 65-2240

BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63 Main bearing spring ring - drive end. Correct fitment on all B31, B33,...

Quantity:

+ −

CODE: wash8134

5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models

£0.15 (£0.18 inc VAT)

OEM: 70-8134, 36-0382, 01-4117, E8134

5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models Shakeproof serrated washer as used to secure bolts -...

Quantity:

+ −

CODE: wash0588

BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72

£0.45 (£0.54 inc VAT)

OEM: 68-0588, 71-4443, E14443

BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...

Quantity:

+ −

CODE: bearing407-F4

BSA Crankshaft Main Bearing Drive side 65-1388

£71.95 (£86.34 inc VAT)

OEM: 65-1388, K141-48

BSA Crankshaft Main Bearing Drive side 65-1388 BSA B32/B34 Goldstar (1950-63) and other BSA models Ariel 500cc Twin KH (1948-57) crankshaft D/S bearing...

Quantity:

+ −

S46-15 - riumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962

CODE: plug-S46-15-B18

Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1937-1962

£2.95 (£3.54 inc VAT)

OEM: S46-15

Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962 Correct fitment on pre unit 3T, 5T, 6T, TR5, T100, T110, T120 and TR6 models...

Quantity:

+ −

CODE: plug1792-B13

Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63

£2.45 (£2.94 inc VAT)

OEM: 82-1792, F1792

Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63 Oil tank drain plug as used on pre unit models from 1946 onwards...

Quantity:

+ −

CODE: nut3772-B13

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3772, F3772

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...

Quantity:

+ −

CODE: nut5664-B13

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models

£9.95 (£11.94 inc VAT)

OEM: 15-5664

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...

Quantity:

+ −

CODE: nut3771-B13

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3771, F3771

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...

Quantity:

+ −

CODE: bolt0361-B18

Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates

£1.75 (£2.10 inc VAT)

OEM: 57-0361, T361

Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....

Quantity:

+ −

CODE: tappet8801-LFH

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980

£38.95 (£46.74 inc VAT)

OEM: 70-8801, E8801

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...

Options

CODE: cover3448-B13

BSA Gearbox Inspection Cover - Swinging Arm A and B Group + 4 Speed C Group Models

£3.45 (£4.14 inc VAT)

OEM: 29-3448

BSA Gearbox Inspection Cover - Swinging Arm A and B Group + 4 Speed C Group Models Correct fitment on A7, A10, B31, B33 swinging arm models + C10L, C11G...

Quantity:

+ −

CODE: plug7546-B13

BSA Primary Chaincase Inner Drain and Level Plug - A7 and A10 Models - Circa 1960-62

£6.95 (£8.34 inc VAT)

OEM: 42-7546

BSA Primary Chaincase Inner Drain and Level Plug - A7 and A10 Models - Circa 1960-62 Correct fitment on later A7 and A10 models from 1959 onwards. Bolt...

Quantity:

+ −

CODE: bolt0645-B18

BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards

£1.95 (£2.34 inc VAT)

OEM: 15-0645

BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards Correct fitment on later A7 and A10 models from 1959 onwards...

Quantity:

+ −

CODE: wash7518

1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use

£0.15 (£0.18 inc VAT)

OEM: 66-7518

1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...

Quantity:

+ −

CODE: bearing6300

6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width

£2.95 (£3.54 inc VAT)

OEM: 6300

6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width Open type bearing without seals to allow for the free circulation of either oil or...

Quantity:

+ −

CODE: tach0586-G15

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72

£35.95 (£43.14 inc VAT)

OEM: 68-0586, 68-586

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Tachometer spindle drive shaft with groove for circlip and square end -...

Quantity:

+ −

CODE: bolt4539-B13

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68

£0.75 (£0.90 inc VAT)

OEM: 70-4539, E4539

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68 Crankcase level plug / bolts - locates in the lower mid section of the crankcase below...

Quantity:

+ −

27-4258 - BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models

CODE: screw4258-B13

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models From 1938 Onwards

£3.95 (£4.74 inc VAT)

OEM: 27-4258

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models Stepped hex head screw that secures the gearbox inspection cover plate - correct...

Quantity:

+ −

CODE: screw3821-B13

2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles

£0.45 (£0.54 inc VAT)

OEM: 70-3821, E3821, 40-0246

2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles Oil seal housing countersunk screw as used on 3TA, 5TA, T100,...

Quantity:

+ −

CODE: nut3034-B13

BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon

£0.75 (£0.90 inc VAT)

OEM: 67-3034

BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon Reduced hex nut that secures the gearbox outer cover on A7 and A10 plunger...

Quantity:

+ −

CODE: nut4401-B13

BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models

£1.95 (£2.34 inc VAT)

OEM: 27-4401

BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models Sleeve nut - locates in the gearbox outer cover to secure the return spring anchor...

Quantity:

+ −

CODE: screw0498-B18

BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models

£0.95 (£1.14 inc VAT)

OEM: 02-0498, 2-498

BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models Inspection cover plate screw used in conjunction with the 3 longer stepped...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

Account Details

Quick Links

Feked.com

Feked Online