.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

washer4075-B13
£9.95 (£11.94 inc VAT)
OEM: 42-4075
BSA Gearbox Locking Washer - 42-4075 Used on the BSA A10 and A7 gearbox to frame. OEM: 42-4075
+

pipe4813
£9.95 (£11.94 inc VAT)
OEM: 83-4813, F14813
Triumph 'D' Type Crankcase Breather Hose/Pipe - T140/TR7 - 1974-78 This hose runs along the rear mudguard after the 'T' piece As fitted to 750cc T140/TR7...
+

pipe7387-B2
£9.95 (£11.94 inc VAT)
OEM: 83-7387
Triumph 'D' Type Rear Mudguard Breather Hose/Pipe - T140/TR7 1977 Onwards Silver coloured 'D' shaped pipe Approximately 52" (132cm) ID: 1/2" (13mm) OD:...
+

nut1007-B18
£9.95 (£11.94 inc VAT)
OEM: 71-1007, E11007
Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83 Correct fitment for  650 and 750 Twins from 1970-1983. Also fits Triumph 500...
+

c/s-tube3903-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3903, E3903, 68-0185, 68-185
Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...
+

nut5664-B13
£9.95 (£11.94 inc VAT)
OEM: 15-5664
BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...
+

bigend6488
£9.95 (£11.94 inc VAT)
OEM: 70-6488, E6488
Triumph T20 Connecting Rod Big End Bush - SH and SM Tiger Cub Models - Circa 1964-68 Correct fitment on later Tiger Cub models from  engine number 99720....
+

seal351-B7
£9.95 (£11.94 inc VAT)
OEM: 90-0749, 90-0147, 89-3006, 86-8769
Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71 Suitable for three or four speed D10 and D14 Bantam models. Kit...
+

c/s-tube3999-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3999, E3999
Triumph Crankshaft Sludge / Oil Tube - 350/500cc Unit Twins Circa 1959-74 Crankshaft oil tube, sludge trap - correct fitment on 3TA, 5TA and T100 models...
+

sw086-PREM-B18
£9.95 (£11.94 inc VAT)
OEM: 60-3719, D3719, 19-6508, PS5330/1/03
Triumph Oil Pressure Switch Triumph - Veglia Type With Straight / Parallel Threads As fitted to later T100 + T140, TR7, TSS, TSX, T150 and T160 models...
 

sw085-UK-B18
£9.95 (£11.94 inc VAT)
OEM: PS5320/6, 60-2133, D2133, 19-6504, 5300/1/07
Triumph/BSA Oil Pressure Switch - Smiths Type With Taper Thread As fitted to unit A50, A65, T120, TR6, T90, T100 models circa 1969-73. Also used on some...
+

pipe5290-B13
£9.45 (£11.34 inc VAT)
OEM: 83-5290, F15290
Triumph Breather Hose 'T' Piece - 750cc Unit Twins - 1974 Onwards Crankcase breather pipe connector for T140, TR7 Models from 1974 onwards. Small pipe...
+

enginestud-9495-B13
£9.45 (£11.34 inc VAT)
OEM: 70-9495, E9495
Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72 Stator stud - correct fitment on T90 and T100 models circa 1969-72. Three...
+

bear422-F4
£8.95 (£10.74 inc VAT)
OEM: 02-1872, 70-1592, 1430-26, E1592
Crankshaft Bearing AJS 350cc/500cc (1957-), MOD 16/18/G3/G80 with AMC gearbox. Triumph 350cc Crankshaft Drive Side, 500cc/650cc pre unit twins Crankshaft...

lift1434-B13
£8.95 (£10.74 inc VAT)
OEM: 66-1434
BSA Exhaust Lifter / Decompressor Spindle Bush  - M20, M21 from 1937-63 - NOS Exhaust valve lifter spindle bush for pre-unit M Group. This is an...
+

pipe5370-B13
£8.95 (£10.74 inc VAT)
OEM: 70-5370, E5370
Triumph Oil Tank Crankcase Breather 'T' Piece - 500/650cc Unit Twins - 1967-70 Crankcase to oil tank breather hose fitting. OEM: 70-5370, E5370
+

nut1463-B13
£8.95 (£10.74 inc VAT)
OEM: 70-1463, E1463
Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins -  3TA, 5T, T100, 6T,...
+

enginestud-4537-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4537, E4537
Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

plate4016G-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4016G, E4016G
Triumph Patent Plate - TRW Side Valve Models Brass timing cover triangular name plate for 500cc side valve twins. Supplied with 3 brass  hammer drive...
+

bearing205c-F4
£8.95 (£10.74 inc VAT)
OEM: 65-2045, T34
BSA Crankshaft Main Drive Side Ball Bearing - B and M Group Models Circa 1946-63 Outer drive side ball bearing - correct fitment on B31, B32, B33, B34,...
+

bearing205g-F4
£8.95 (£10.74 inc VAT)
OEM: 57-1070, T1070
Triumph Gearbox Mainshaft High Gear Bearing - T15 and T20 Models From 1956 Onwards Left hand gearbox mainshaft ball bearing - correct fitment on T15 and...
+

pipe1614-B2
£8.45 (£10.14 inc VAT)
OEM: 83-1614, F11614
Triumph 'D' Type Crankcase Breather Hose/Pipe - Unit Twins - 1970-73 As fitted on T100/T120/TR6 Oil in frame models Silver coloured 'D' shaped pipe...
+

enginestud-4536-B13
£8.45 (£10.14 inc VAT)
OEM: 70-4536, E4536
Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

bolts4470-B14
£8.45 (£10.14 inc VAT)
OEM: 42-4470, 67-0350, 67-350
BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62 Set of three engine plate tie bolts, suitable to replace the...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.