.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

camshaft3275-B7
£68.95 (£82.74 inc VAT)
OEM: 70-3275, E3275
Triumph Inlet / Exhaust Camshaft - Pre Unit 500/650cc Models - Cast Iron Head Correct fitment on 5T, TR5, T100 and 6T models circa 1953-62. Nitrided...
+

e-sprock3108-B9
£24.95 (£29.94 inc VAT)
OEM: 70-3108, E3108
Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61 Correct fitment on 5T, T100, TR5, T110, T120, TR6 and 6T models. Number of Teeth: 19T,...

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

screwkit-953M-B9
£37.95 (£45.54 inc VAT)
OEM: E3439, E3437, E3440, E3442, E3438, 70-3439, 70-3437, 70-3440, 70-3442, 70-3438
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62 Complete set of engine/gearbox screws suitable for...
+

wash0645-B18
£2.45 (£2.94 inc VAT)
OEM: 67-0645, 67-645
BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...
+

pump-gkt-preunit-03
£1.00 (£1.20 inc VAT)
OEM: E1537, 70-1537
Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537
+

bolt206-B19
£4.45 (£5.34 inc VAT)
OEM: 21-2206
Triumph 650cc and 750cc Twin - Cylinder Head Bolt 3/5" UNF OEM: 21-2206
+

valv025-B18
£2.95 (£3.54 inc VAT)
OEM: 70-6062
Triumph Oil pressure release valve spring for 350/500/650cc Unit models. OEM: 70-6062
+

bolt736H-B19
£5.95 (£7.14 inc VAT)
OEM: 21-2201
Triumph T140 Cylinder head stud (outer 3/8" Stud) OEM: 21-2201
+

rollers0375-B18
£5.95 (£7.14 inc VAT)
OEM: 24-0375, 24-375
1/4" x 5/16" Big End Bearing Rollers - BSA B and M Group Models Circa 1938-63 - 25 Pack Connecting rod big end crank pin rollers - correct fitment on BSA...
+

tach0586-G15
£35.95 (£43.14 inc VAT)
OEM: 68-0586, 68-586
BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Tachometer spindle drive shaft with groove for circlip and square end -...
+

gk3754
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763, 71-1458, 71-3754
Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole 3 hole version also available - see related products. OEM: 70-3763, E3763,...
+

bolt-set0011-B14
£23.95 (£28.74 inc VAT)
OEM: 36-0011, 36-11
Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards High quality BZP plated high tensile bolts with correct shanks for use with alloy heads...
+

plug2259-B13
£4.95 (£5.94 inc VAT)
OEM: 57-2259, T2259
Triumph Primary Chain Oil Drain and Adjuster Plug - 650/750cc - 1969 Onwards Triumph Unit Twins - T120 from 1969-72, T140 from 1973-79. 7/16" UNC Thread...
+

nut0585-C14
£2.95 (£3.54 inc VAT)
OEM: 21-0585, S585
Triumph Rear Wheel Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards Rear axle nut on later T100 and T120 models + 750cc triples from 1970...
+

off-esprk449
£29.95 (£35.94 inc VAT)
OEM: 70-3912, E3912
Triumph T20 Tiger Cub  - Duplex Engine Primary Drive Sprocket - 16T Crankshaft sprocket for Triumph Tiger Cub trials/competition models. Will require the...
+

pump-mor-13
£89.95 (£107.94 inc VAT)
OEM: 70-3072, E3072, GS326
Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...
+

tappet8801-LFH
£38.95 (£46.74 inc VAT)
OEM: 70-8801, E8801
Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...
 

key1558-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1558, E1558
Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

disc3822-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3822, 68-0130, 68-130, E3822
Triumph/BSA Crankcase Rotary Breather Disc - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also fits all...
+

gear0339-B18
£43.95 (£52.74 inc VAT)
OEM: 67-0339, 67-339
BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models 22 tooth crankshaft timing gear as used on all A50 and A65 models...
+

bolt3767-B13
£5.95 (£7.14 inc VAT)
OEM: 82-3767, F3767
Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...
+

bolt-set0078-B14
£56.95 (£68.34 inc VAT)
OEM: 00-0078
Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.