.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

filt059-B3
£9.95 (£11.94 inc VAT)
OEM: 70-9979, E9979
BSA B25, B50 Oil Sump Filter Gauze Stainless Steel Oil sump filter. 9mm hole OEM: 70-9979, E9979
+

pump-gkt-unit-02
£1.00 (£1.20 inc VAT)
OEM: E11461, 71-1461
Triumph Unit Oil Pump Gasket 500cc, 650cc, 750cc etc OEM E11461, 71-1461
+

pump-gkt-preunit-03
£1.00 (£1.20 inc VAT)
OEM: E1537, 70-1537
Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537
+

studs602-B18
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865, 71-3013, E13013
Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...
+

studs601-B14
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865
Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72 Correct fitment on Triumph T120 and TR6 models. Set includes 8 cylinder base studs - 12...
+

nut6523-B13
£4.95 (£5.94 inc VAT)
OEM: 70-6523, E6523
Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...
+

plug3668-B13
£5.95 (£7.14 inc VAT)
OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851
Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...
+

bolt9330-B13
£0.95 (£1.14 inc VAT)
OEM: 70-9330, E9330
Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards Crankcase timing side oil way plug as fitted to T120, TR6 models from 1968 onwards + all...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

plug0615-B18
£6.45 (£7.74 inc VAT)
OEM: 65-0615, 65-615
BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62 To fit small journal crankshafts as used on A7 models from 1947-62 and A10...
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

camshaft3275-B7
£68.95 (£82.74 inc VAT)
OEM: 70-3275, E3275
Triumph Inlet / Exhaust Camshaft - Pre Unit 500/650cc Models - Cast Iron Head Correct fitment on 5T, TR5, T100 and 6T models circa 1953-62. Nitrided...
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

nut1463-B13
£8.95 (£10.74 inc VAT)
OEM: 70-1463, E1463
Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins -  3TA, 5T, T100, 6T,...
+

nut0643-B18
£4.95 (£5.94 inc VAT)
OEM: 67-0643, 67-643
BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

sump221B-B3
£41.95 (£50.34 inc VAT)
OEM: 67-1285, 67-1286
BSA Sump Plate - A7/A10/A50/A65 Models CNC manufactured from solid billet alloy Finned alloy sump plate with magnetic drain plug. Supplied with magnetic...
+

filt582-SS-B3
£23.95 (£28.74 inc VAT)
OEM: 42-8334, 42-8426
BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63 Oil tank filter and drain plug. Correct fitment for BSA A7, A10, B31 and B33...
 

fkscrew211-B9
£13.95 (£16.74 inc VAT)
OEM: 14-6606, 14-6608, 14-6610, 14-6611, 14-6612, 14-6614, 40-0236
Stainless Steel Allen Screw Kit - BSA B50 Models Complete set, includes two allen keys and all required UNC stainless steel hex screws. OEM: 14-6606,...
+

bolt-set0078-B14
£56.95 (£68.34 inc VAT)
OEM: 00-0078
Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...
+

bolt-set9948-B14
£59.95 (£71.94 inc VAT)
OEM: 70-1596, E1596, 70-4771, E4771, 70-0327, E327, 70-2982, E2982, 21-1875, S1875, 57-1553, T1553
Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970 Complete set of bolts and washers as follows: 1x 70-4771 Centre head bolt - 5/16" x...
+

screwkit-81-B9
£26.95 (£32.34 inc VAT)
OEM: 70-3800, E3800, 70-3801, E3801, 70-3802, E3802, 70-3804, E3804, 70-3668, E3668, 57-1401, 57-1402, 57-1944
Engine and Gearbox Cover Screw Set - Triumph 350/500cc Twins 1957-68 Screw set to secure the primary, gearbox and timing cover on unit 3TA, 5TA and T100...
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

bolt-set3797-B14
£67.95 (£81.54 inc VAT)
OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302
Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...
+

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

shim0633-set-3-B18
£6.45 (£7.74 inc VAT)
OEM: 68-0633, 68-0634, 68-0635, 68-633, 68-634, 68-635
BSA Crankshaft Shim Set - A50, A65 From 1966 Onwards Set of 3 shims: OD: 1+3/4" (44.3mm) ID: 1+1/4" (32mm) 1x 0.010" 1x 0.006" 1x 0.003" Made in England...
+

shim0187-B18
£5.95 (£7.14 inc VAT)
OEM: 68-0187, 68-0188, 68-0189, 68-187, 68-188, 68-189
BSA Crankshaft Shim Set - A50, A65 From 1962-65 Set of 3 shims: OD: 1+5/8" (41.4mm) ID: 1+3/16" (30.2mm) 1x 0.010" 1x 0.005" 1x 0.003" Made in England...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

bolt3552-B13
£3.95 (£4.74 inc VAT)
OEM: 71-3552, E13552
Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982 Flywheel to crankshaft bolt as used on Triumph 750cc twins - 3 required. Length UH: 1+7/16"...
+

spring1706-B13
£12.95 (£15.54 inc VAT)
OEM: 66-1706
BSA Cush Drive Spring - B and M Group Models from 1937-54 Correct for all B group models B24, B26,  B31, B32, B33, B3 4 Gold Star  from 1937-54. Also M...
+

shim2056-B13
£3.95 (£4.74 inc VAT)
OEM: 67-2056, 67-2057, 67-2058
BSA Engine Sprocket Shims  - A7, A10 Models from 1946-62 ID: 1" (25.6mm) OD: 1+7/16" (36.5mm) 5x 0.010" - stack as required. Made in England OEM:...
+

shim1629-B13
£2.45 (£2.94 inc VAT)
OEM: 71-1629, 71-1630
BSA B50 Engine Sprocket / Main Bearing Shims  - 3 Shim Set ID: 7/8" (22.3mm) OD: 1+9/32" (32.5mm) 3x 0.015" - stack as required. Made in England OEM:...
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

pipe1610-B13
£13.95 (£16.74 inc VAT)
OEM: 83-1610, F11610
Triumph Breather Hose 'T' Piece - 500/650/750cc Unit Twins - 1971-73 Crankcase breather pipe connector for T100 Daytona, T120, TR6, T140, TR7 models...
+

pipe5290-B13
£9.45 (£11.34 inc VAT)
OEM: 83-5290, F15290
Triumph Breather Hose 'T' Piece - 750cc Unit Twins - 1974 Onwards Crankcase breather pipe connector for T140, TR7 Models from 1974 onwards. Small pipe...
+

nut1007-B18
£9.95 (£11.94 inc VAT)
OEM: 71-1007, E11007
Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83 Correct fitment for  650 and 750 Twins from 1970-1983. Also fits Triumph 500...
+

dowel0989-B18
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+

shim0661-B18
£3.45 (£4.14 inc VAT)
OEM: 66-0661, 66-661
BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...
+

bolt0208-B19
£0.75 (£0.90 inc VAT)
OEM: 14-0208
Triumph Auto Advance Fixing Bolt - T140, TR7, TR65 Models + Other Uses 1/4" UNF Length UH: 2+1/4" (57mm) Length of thread: 3/4" (19mm) OEM: 14-0208
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

nut1310-B14
£1.75 (£2.10 inc VAT)
OEM: 70-1310, E1310, 82-1008, F1008
Triumph Nut - 5/16" x 26TPI - Oil Block to Crankcase Unit Twins + Other Uses 5/16" x 26TPI  small hexagon thin wall nut. OEM: 70-1310, E1310,  82-1008,...
+

gk3754
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763, 71-1458, 71-3754
Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole 3 hole version also available - see related products. OEM: 70-3763, E3763,...
+

pipe5370-B13
£8.95 (£10.74 inc VAT)
OEM: 70-5370, E5370
Triumph Oil Tank Crankcase Breather 'T' Piece - 500/650cc Unit Twins - 1967-70 Crankcase to oil tank breather hose fitting. OEM: 70-5370, E5370
+

filt0529-B3
£17.95 (£21.54 inc VAT)
OEM: 70-0529, E529
Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962 Correct fitment for all pre unit twins 350/500/650cc - 3T, T100,  5T, 6T, T110,...
+

spring1136-B18
£10.95 (£13.14 inc VAT)
OEM: 67-1136
BSA Cush Drive Spring - Pre Unit A, B, & M Models - 1955-62 Correct for all swinging arm models with a 2 lobe cush drive cam from 1955-62. Made in...
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

wash2594-B13
£0.75 (£0.90 inc VAT)
OEM: 70-2594, E2594
Triumph Rocker Spindle Thrust Washer - T20 Tiger Cub OD: 5/8" (15.8mm) ID: 3/8" (9.8mm) Thickness: 1/32" (0.8mm) OEM: 70-2594, E2594
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.