.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

bolt0243-B18
£4.45 (£5.34 inc VAT)
OEM: 28-0243, 28-243
BSA Gearbox Drain Bolt - Pre Unit A, B and C Models from 1939 Onwards As used on many pre unit A, B and C models Overall Length: 5/8" (15.6mm) UH Length:...
+

gkt1529
£0.75 (£0.90 inc VAT)
OEM: 70-1529, E1529
Triumph Oil Feed Block Gasket - Pre Unit Models Triumph pre-unit twins - 350, 500, 650cc OEM: 70-1529, E1529
+

camshaft3134-B7
£69.95 (£83.94 inc VAT)
OEM: 70-3134, E3134, 71-1063, E11063, 70-4819, E4819
Triumph Inlet Camshaft - Unit 650cc Models from 1963-72 + Pre Unit 650cc to 1962 To suit many Triumph 650cc models - T120, T120R, TR6 etc Nitrided...

bolt9988-B13
£4.95 (£5.94 inc VAT)
OEM: 70-9988, E9988
Triumph Tacho Drive Slotted Thimble Bolt/Screw Correct fitment for many Triumph 500/650/750cc models. Screws into the end of the exhaust camshaft  to...
+

disc2256-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2256, 68-0132, E2256, 68-132
Triumph/BSA Crankcase Rotary Breather Disc Spring - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also...
+

lift1435-B13
£17.95 (£21.54 inc VAT)
OEM: 66-1435
BSA Exhaust Lifter / Decompressor Spindle - M20, M21 from 1937-63 Exhaust valve lifter spindle for pre-unit M Group. This is an original new old stock...
+

lift1434-B13
£8.95 (£10.74 inc VAT)
OEM: 66-1434
BSA Exhaust Lifter / Decompressor Spindle Bush  - M20, M21 from 1937-63 - NOS Exhaust valve lifter spindle bush for pre-unit M Group. This is an...
+

wash0300-B18
£3.95 (£4.74 inc VAT)
OEM: 31-0300, 31-300
BSA Crankpin Nut Locking Washer - B & M Group As used on early B and M Group singles. Original BSA part - New Old Stock OEM: 31-0300, 31-300
+

wash8343
£0.75 (£0.90 inc VAT)
OEM: 42-8343
Fibre Washer - 1+1/4" - BSA Oil Tank Filter Washer + Universal Uses Correct part for BSA A & B Models, C10L, C12 - oil tank filter washer OD: 1+1/4"...
+

nut0152-B14
£3.45 (£4.14 inc VAT)
OEM: 15-0152, 15-152, NM16187, 06-7664
7/16" x 20 TPI Nut  - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM:  15-0152, 15-152, NM16187, 06-7664
+

disc3822-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3822, 68-0130, 68-130, E3822
Triumph/BSA Crankcase Rotary Breather Disc - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also fits all...
+

nut0398-B18
£6.95 (£8.34 inc VAT)
OEM: 70-0398, E398
Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models 3/4" x 20 TPI - Stainless steel OEM: 70-0398, E398
+

nut1492-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1492, E1492
Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins Camshaft retaining nut. 5/8" 20 TPI with left hand thread. OEM: 70-1492, E1492
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

key1558-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1558, E1558
Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...
+

filt407-B7
£49.95 (£59.94 inc VAT)
OEM: 19-4589, 99-1179
Triumph Sump Plate / Oil Filter Kit - 650/750cc Oil in Frame Models Complete kit containing: Billet alloy sump plate Oil filter base plate Oil...
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

nut3685-B13
£5.95 (£7.14 inc VAT)
OEM: 70-3685, E3685
Triumph Tacho Drive Nut - Pre-Unit 500/650cc Models Slotted nut to connect the tacho drive to the exhaust camshaft - LH thread. OEM: 70-3685, E3685
+

wash2594-B13
£0.75 (£0.90 inc VAT)
OEM: 70-2594, E2594
Triumph Rocker Spindle Thrust Washer - T20 Tiger Cub OD: 5/8" (15.8mm) ID: 3/8" (9.8mm) Thickness: 1/32" (0.8mm) OEM: 70-2594, E2594
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

spring1136-B18
£10.95 (£13.14 inc VAT)
OEM: 67-1136
BSA Cush Drive Spring - Pre Unit A, B, & M Models - 1955-62 Correct for all swinging arm models with a 2 lobe cush drive cam from 1955-62. Made in...
+

plug6347-B13
£2.95 (£3.54 inc VAT)
OEM: 70-6347, E6347
Triumph Primary Chain Oil Drain and Adjuster Plug - Short Type - 650cc Twins from 1966-70 Short type with BSF thread - used on T120 and TR6 models from...
+

filt0529-B3
£17.95 (£21.54 inc VAT)
OEM: 70-0529, E529
Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962 Correct fitment for all pre unit twins 350/500/650cc - 3T, T100,  5T, 6T, T110,...
+

pipe5370-B13
£8.95 (£10.74 inc VAT)
OEM: 70-5370, E5370
Triumph Oil Tank Crankcase Breather 'T' Piece - 500/650cc Unit Twins - 1967-70 Crankcase to oil tank breather hose fitting. OEM: 70-5370, E5370
+

gk3754
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763, 71-1458, 71-3754
Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole 3 hole version also available - see related products. OEM: 70-3763, E3763,...
+

nut1310-B14
£1.75 (£2.10 inc VAT)
OEM: 70-1310, E1310, 82-1008, F1008
Triumph Nut - 5/16" x 26TPI - Oil Block to Crankcase Unit Twins + Other Uses 5/16" x 26TPI  small hexagon thin wall nut. OEM: 70-1310, E1310,  82-1008,...
+

camshaft3325-B7
£62.95 (£75.54 inc VAT)
OEM: 70-3325, E3325
Triumph Inlet / Exhaust Camshaft - Pre Unit 500/650cc Models Circa 1954-62 Nitrided camshaft suitable for both inlet and exhaust. Correct fitment - inlet...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

bolt0208-B19
£0.75 (£0.90 inc VAT)
OEM: 14-0208
Triumph Auto Advance Fixing Bolt - T140, TR7, TR65 Models + Other Uses 1/4" UNF Length UH: 2+1/4" (57mm) Length of thread: 3/4" (19mm) OEM: 14-0208
+

shim0661-B18
£3.45 (£4.14 inc VAT)
OEM: 66-0661, 66-661
BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...
+

dowel0989-B18
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+

nut1007-B18
£9.95 (£11.94 inc VAT)
OEM: 71-1007, E11007
Triumph Inlet Camshaft Oil Pump Drive Nut - 500/650/750cc Twins - 1970-83 Correct fitment for  650 and 750 Twins from 1970-1983. Also fits Triumph 500...
+

pipe5290-B13
£9.45 (£11.34 inc VAT)
OEM: 83-5290, F15290
Triumph Breather Hose 'T' Piece - 750cc Unit Twins - 1974 Onwards Crankcase breather pipe connector for T140, TR7 Models from 1974 onwards. Small pipe...
+

pipe1610-B13
£13.95 (£16.74 inc VAT)
OEM: 83-1610, F11610
Triumph Breather Hose 'T' Piece - 500/650/750cc Unit Twins - 1971-73 Crankcase breather pipe connector for T100 Daytona, T120, TR6, T140, TR7 models...
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

shim1629-B13
£2.45 (£2.94 inc VAT)
OEM: 71-1629, 71-1630
BSA B50 Engine Sprocket / Main Bearing Shims  - 3 Shim Set ID: 7/8" (22.3mm) OD: 1+9/32" (32.5mm) 3x 0.015" - stack as required. Made in England OEM:...
+

shim2056-B13
£3.95 (£4.74 inc VAT)
OEM: 67-2056, 67-2057, 67-2058
BSA Engine Sprocket Shims  - A7, A10 Models from 1946-62 ID: 1" (25.6mm) OD: 1+7/16" (36.5mm) 5x 0.010" - stack as required. Made in England OEM:...
+

spring1706-B13
£12.95 (£15.54 inc VAT)
OEM: 66-1706
BSA Cush Drive Spring - B and M Group Models from 1937-54 Correct for all B group models B24, B26,  B31, B32, B33, B3 4 Gold Star  from 1937-54. Also M...
+

bolt3552-B13
£3.95 (£4.74 inc VAT)
OEM: 71-3552, E13552
Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982 Flywheel to crankshaft bolt as used on Triumph 750cc twins - 3 required. Length UH: 1+7/16"...
+

sump-bolt-washer-set-B3
£3.45 (£4.14 inc VAT)
OEM: 31-222, 31-0222
BSA Alloy Sump Plate Securing Bolts - Non Standard To replace existing studs in crankcase, to allow fitment of the thicker cast-alloy or billet-alloy sump...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

shim0187-B18
£5.95 (£7.14 inc VAT)
OEM: 68-0187, 68-0188, 68-0189, 68-187, 68-188, 68-189
BSA Crankshaft Shim Set - A50, A65 From 1962-65 Set of 3 shims: OD: 1+5/8" (41.4mm) ID: 1+3/16" (30.2mm) 1x 0.010" 1x 0.005" 1x 0.003" Made in England...
+

shim0633-set-3-B18
£6.45 (£7.74 inc VAT)
OEM: 68-0633, 68-0634, 68-0635, 68-633, 68-634, 68-635
BSA Crankshaft Shim Set - A50, A65 From 1966 Onwards Set of 3 shims: OD: 1+3/4" (44.3mm) ID: 1+1/4" (32mm) 1x 0.010" 1x 0.006" 1x 0.003" Made in England...
+

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

cover3677
£324.95 (£389.94 inc VAT)
OEM: 70-3677, E3677
Triumph Timing Cover With Tacho Drive - Pre Unit Twin Dynamo / Generator Models Complete timing cover assembly with tacho drive, slotted exhaust camshaft...
+

bolt-set3797-B14
£67.95 (£81.54 inc VAT)
OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302
Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.