.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

stud3819-B19
£1.75 (£2.10 inc VAT)
OEM: 70-3819, E3819
Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Longer Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Longer...
+

stud3820-B19
£1.75 (£2.10 inc VAT)
OEM: 70-3820, E3820
Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Shorter Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Shorter...
+

screw6609-B19
£1.75 (£2.10 inc VAT)
OEM: 14-6609
Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...
+

bolt1555-B19
£1.75 (£2.10 inc VAT)
OEM: 70-1555, E1555
Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...
+

seal136-C13
£1.95 (£2.34 inc VAT)
OEM: 70-3876
OIL SEAL - Triumph Crankshaft D/S Oil seal for Triumph 3TA/5TA/T90/T100 (1957-72), T120/TR6 (1963-70). OEM: 70-3876
+

bolt401-B19
£1.95 (£2.34 inc VAT)
OEM: 14-1401
Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401
+

bolt763-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1875
Triumph High tensile bolt 1/4 x 1/4 UNC. Rockerbox corner bolt (1969-) OEM: 21-1875
+

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

bolt055-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1865, S1865
Triumph Cylinder Base Stud - 650/750cc Models From 1969 Onwards Correct fitment on Triumph T120, TR6 and T140, TR7 models. 3/8-24/16 x 1 3/4" UNC/UNF...
+

pillarbolt513-B19
£1.95 (£2.34 inc VAT)
OEM: 40-0683, 70-4747
Contact breaker pillar bolt. To secure the contact points set on side points models, also secures the points cover. Fits BSA C15/B44/B50 and Triumph...
+

enginestud-3980-B13
£1.95 (£2.34 inc VAT)
OEM: E3980, 70-3980
Alternator Mounting Stud - Triumph - 70-3980 Fits the early Triumph pre-unit and other models For mounting the alternator stator on the primary chain...
+

engine4152-B18
£1.95 (£2.34 inc VAT)
OEM: 70-4152, E4152
Triumph Primary Chain Tensioner Blade Rod - 70-4152 To adjust the tension of the primary chain, on some Triumph models OEM: 70-4152, E4152
+

enginestud-239-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1867
Short Alternator Mounting Stud Triumph 650 Twins - 1967 onwards Fits 650 Unit Twins from 1967 onwards OEM: 21-1867
+

pipe5285-B2
£1.95 (£2.34 inc VAT)
OEM: 83-5285, F15285
Triumph 'D' Type Crankcase Breather Hose/Pipe - T140/TR7 - 1974-78 This hose runs from the crankcase to the 'T' piece As fitted to 750cc T140/TR7 Tiger...
+

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

pumpgkt2296
£1.95 (£2.34 inc VAT)
OEM: 71-2296, 68-0939, 68-939, 68-0293, 86-293
BSA Oil Pump Gasket - A50 and A65 Models Circa 1963-73 Correct fitment on 500/650cc unit twins. Made in England OEM: 71-2296, 68-0939, 68-939, 68-0293,...
+

nut-DS48-B14
£1.95 (£2.34 inc VAT)
OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753
1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

spring0497-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0497, T497
Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62 Spring for use with the rear chain oiler / oil restrictor screw, as fitted to...
+

plug4154-B13
£1.95 (£2.34 inc VAT)
OEM: 70-4154, E4154
Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins from 1961-68 Primary cover oil drain plug with right hand thread. Correct fitment on unit 3TA,...
+

stud2022-B19
£1.95 (£2.34 inc VAT)
OEM: 70-2022, E2022
Triumph Magneto To Crankcase Fixing Stud - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, TR5, 6T, T110, TR6 and T120...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.