Engine & Transmission :: Engine Lower

CODE: screw1926-B13

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72

£2.45 (£2.94 inc VAT)

OEM: 21-1926, S1926

Triumph Crankcase Mouth Screw - Unit 350/500cc Models - Circa 1969-72 Correct fitment on T90 and T100 models circa 1969-72. Two required per engine -...

Quantity:

+ −

CODE: bearing0732-F4

BSA/Triumph Crankshaft Main Bearing - BSA C Group Circa 1946-58 + Unit Singles

£7.95 (£9.54 inc VAT)

OEM: 24-0732, 24-732, 70-8003, E8003

BSA/Triumph Crankshaft Main Bearing - BSA C Group Circa 1946-58 + Unit Singles Deep groove open type ball bearing - drive side and/or timing side,...

Quantity:

+ −

CODE: plug1112-B18

Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models - Circa 1959-68

£4.95 (£5.94 inc VAT)

OEM: 57-1112, T1112

Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...

Quantity:

+ −

CODE: spindle0375-B18

Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982

£7.45 (£8.94 inc VAT)

OEM: 70-0375, E375

Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982 Spindle for intermediate timing gear as fitted to all...

Quantity:

+ −

CODE: bolt6220-B14

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220

£1.25 (£1.50 inc VAT)

OEM: 14-6220

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220 As used on various Triumph models - crankcase clamping bolt on unit twins and triples circa...

Quantity:

+ −

CODE: wash3300-B13

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82

£4.95 (£5.94 inc VAT)

OEM: 70-3300, E3300

Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...

Quantity:

+ −

CODE: bearing0011-F4

BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles

£3.45 (£4.14 inc VAT)

OEM: 90-0011, 90-11, 70-8151, E8151

BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles C10L and C12 4 speed models + Bantam D1, D3, D5, D7, D10, D14 and B175...

Quantity:

+ −

70-0400, E400 - Triumph Timing Gear Intermediate Wheel Bush - All Pre Unit and Unit Twins - Circa 1946-1982

CODE: bush0400-B8

Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982

£5.95 (£7.14 inc VAT)

OEM: 70-0400, E400

Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982 Correct fitment on all 350/500/650/750cc pre unit and unit twins...

Quantity:

+ −

CODE: c/s-tube3903-B13

Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82

£9.95 (£11.94 inc VAT)

OEM: 70-3903, E3903, 68-0185, 68-185

Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...

Quantity:

+ −

CODE: pmp7317-B13

Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards

£79.95 (£95.94 inc VAT)

OEM: 71-7317, E17317

Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards Complete four valve oil pump assembly with pump...

Quantity:

+ −

CODE: spring0403-B18

Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards

£0.45 (£0.54 inc VAT)

OEM: 70-0403, E403

Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards Locates within the screwed plugs in the bottom of the pump under the valve...

Quantity:

+ −

CODE: cover7318

Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81

£119.95 (£143.94 inc VAT)

OEM: 71-7318, E17318, 70-4567, E4567, 70-8797, E8797, 70-9246, E9246, 71-7042, E17042

Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81 Polished alloy timing cover compatible with either a 2 valve or 4 valve oil pump....

Quantity:

+ −

CODE: 7-32-ball-F4

7/32" Ball Bearing - Single Ball - Universal Use

£0.25 (£0.30 inc VAT)

OEM: S70-7, 60-2363, D2363, 70-8019, E8019

7/32" Ball Bearing - Single Ball - Universal Use Diameter: 7/32" (5.6mm) As used in all standard dual or 4 valve oil pump assemblies on Triumph pre unit...

Quantity:

+ −

CODE: pipeset7013-B3

Triumph Oil Junction Block - 750cc Twins Circa 1976-78

£15.95 (£19.14 inc VAT)

OEM: 71-7013, E17013

Triumph Oil Junction Block - 750cc Twins Circa 1976-78 Nickel plated steel oil pipe assembly that feeds and returns oil to and from the oil pump at the...

Quantity:

+ −

CODE: screw1647-B13

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62

£2.95 (£3.54 inc VAT)

OEM: 70-1647, E1647

Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, T100, TR5, 6T, T110, TR6...

Quantity:

+ −

CODE: stud0456-B18

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62

£2.45 (£2.94 inc VAT)

OEM: 57-0456, T456

Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...

Quantity:

+ −

CODE: wash8754

Triumph/BSA/Norton Oil Pressure Release Valve Body Fibre Washer - All Valve Types

£0.65 (£0.78 inc VAT)

OEM: 70-8754, E8754, GS254, 70-9738, E9738, NMT2057, NMT2058, 06-7541

Triumph/BSA/Norton Oil Pressure Release Valve Body Fibre Washer - All Valve Types Locates between the valve body, piston, spring and cap. Suitable for all...

Quantity:

+ −

70-1670, E1670, 06-7542, 67-1499 - Triumph/BSA/Norton Oil Pressure Release Valve Fibre Washer - All Valve Types

CODE: wash1670

Triumph/BSA/Norton Oil Pressure Release Valve / Timing Cover Fibre Washer - All Valve Types

£0.45 (£0.54 inc VAT)

OEM: 70-1670, E1670, 06-7542, 67-1499

Triumph/BSA/Norton Oil Pressure Release Valve Fibre Washer - All Valve Types Locates between the valve body and the timing cover / crankcase. Suitable for...

Quantity:

+ −

CODE: stud4088-B14

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70

£3.95 (£4.74 inc VAT)

OEM: 68-4088

BSA Top Front Engine Mounting Stud - A50 and A65 Models Circa 1964-70 Locates at the front of the frame between the two down tubes - correct fitment on...

Quantity:

+ −

CODE: nut2228-B13

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 70-2228, E2228

Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...

Quantity:

+ −

CODE: pmp-gear0603-B18

BSA/Triumph Oil Pump Drive Gear - Unit Singles From 1966 Onwards

£53.95 (£64.74 inc VAT)

OEM: 41-0603, 41-603, 70-8094, E8094

BSA/Triumph Oil Pump Drive Gear - Unit Singles From 1966 Onwards Oil pump spindle gear - correct fitment on unit singles: B25 and B50 models from 1969...

Quantity:

+ −

CODE: gk3763

Triumph Oil Junction Block Gasket - 350/500/650cc Unit Twins Circa 1959-70 - 3 Hole

£0.95 (£1.14 inc VAT)

OEM: 70-3763, E3763

Triumph Oil Junction Block Gasket - 350/500/650cc Unit Twins Circa 1959-70 - 3 Hole 4 hole version also available - see related products. OEM: 70-3763,...

Quantity:

+ −

CODE: seal289

BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards

£1.95 (£2.34 inc VAT)

OEM: 40-0679, 70-8153, E8153

BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...

Quantity:

+ −

CODE: wash7971

BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles

£0.75 (£0.90 inc VAT)

OEM: 29-7971, 82-9070, F9070

BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles Fibre washer locates between the oil tank filter and oil feed pipe/banjo....

Quantity:

+ −

CODE: dowel1535-B13

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62

£2.45 (£2.94 inc VAT)

OEM: 70-1535, E1535

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...

Quantity:

+ −

CODE: circlip2240-B13

BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63

£1.95 (£2.34 inc VAT)

OEM: 65-2240

BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63 Main bearing spring ring - drive end. Correct fitment on all B31, B33,...

Quantity:

+ −

CODE: wash8134

5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models

£0.15 (£0.18 inc VAT)

OEM: 70-8134, 36-0382, 01-4117, E8134

5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models Shakeproof serrated washer as used to secure bolts -...

Quantity:

+ −

CODE: wash0588

BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72

£0.45 (£0.54 inc VAT)

OEM: 68-0588, 71-4443, E14443

BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...

Quantity:

+ −

CODE: bearing407-F4

BSA Crankshaft Main Bearing Drive side 65-1388

£71.95 (£86.34 inc VAT)

OEM: 65-1388, K141-48

BSA Crankshaft Main Bearing Drive side 65-1388 BSA B32/B34 Goldstar (1950-63) and other BSA models Ariel 500cc Twin KH (1948-57) crankshaft D/S bearing...

Quantity:

+ −

S46-15 - riumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962

CODE: plug-S46-15-B18

Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1937-1962

£2.95 (£3.54 inc VAT)

OEM: S46-15

Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962 Correct fitment on pre unit 3T, 5T, 6T, TR5, T100, T110, T120 and TR6 models...

Quantity:

+ −

CODE: plug1792-B13

Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63

£2.45 (£2.94 inc VAT)

OEM: 82-1792, F1792

Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63 Oil tank drain plug as used on pre unit models from 1946 onwards...

Quantity:

+ −

CODE: nut3772-B13

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3772, F3772

Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...

Quantity:

+ −

CODE: nut5664-B13

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models

£9.95 (£11.94 inc VAT)

OEM: 15-5664

BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...

Quantity:

+ −

CODE: nut3771-B13

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62

£4.45 (£5.34 inc VAT)

OEM: 82-3771, F3771

Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...

Quantity:

+ −

CODE: bolt0361-B18

Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates

£1.75 (£2.10 inc VAT)

OEM: 57-0361, T361

Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....

Quantity:

+ −

CODE: tappet8801-LFH

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980

£38.95 (£46.74 inc VAT)

OEM: 70-8801, E8801

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...

Options

CODE: cover3448-B13

BSA Gearbox Inspection Cover - Swinging Arm A and B Group + 4 Speed C Group Models

£3.45 (£4.14 inc VAT)

OEM: 29-3448

BSA Gearbox Inspection Cover - Swinging Arm A and B Group + 4 Speed C Group Models Correct fitment on A7, A10, B31, B33 swinging arm models + C10L, C11G...

Quantity:

+ −

CODE: plug7546-B13

BSA Primary Chaincase Inner Drain and Level Plug - A7 and A10 Models - Circa 1960-62

£6.95 (£8.34 inc VAT)

OEM: 42-7546

BSA Primary Chaincase Inner Drain and Level Plug - A7 and A10 Models - Circa 1960-62 Correct fitment on later A7 and A10 models from 1959 onwards. Bolt...

Quantity:

+ −

CODE: bolt0645-B18

BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards

£1.95 (£2.34 inc VAT)

OEM: 15-0645

BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards Correct fitment on later A7 and A10 models from 1959 onwards...

Quantity:

+ −

CODE: wash7518

1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use

£0.15 (£0.18 inc VAT)

OEM: 66-7518

1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...

Quantity:

+ −

CODE: bearing6300

6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width

£2.95 (£3.54 inc VAT)

OEM: 6300

6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width Open type bearing without seals to allow for the free circulation of either oil or...

Quantity:

+ −

CODE: tach0586-G15

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72

£35.95 (£43.14 inc VAT)

OEM: 68-0586, 68-586

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Tachometer spindle drive shaft with groove for circlip and square end -...

Quantity:

+ −

CODE: bolt4539-B13

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68

£0.75 (£0.90 inc VAT)

OEM: 70-4539, E4539

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68 Crankcase level plug / bolts - locates in the lower mid section of the crankcase below...

Quantity:

+ −

27-4258 - BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models

CODE: screw4258-B13

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models From 1938 Onwards

£3.95 (£4.74 inc VAT)

OEM: 27-4258

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models Stepped hex head screw that secures the gearbox inspection cover plate - correct...

Quantity:

+ −

CODE: screw3821-B13

2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles

£0.45 (£0.54 inc VAT)

OEM: 70-3821, E3821, 40-0246

2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles Oil seal housing countersunk screw as used on 3TA, 5TA, T100,...

Quantity:

+ −

CODE: nut3034-B13

BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon

£0.75 (£0.90 inc VAT)

OEM: 67-3034

BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon Reduced hex nut that secures the gearbox outer cover on A7 and A10 plunger...

Quantity:

+ −

CODE: nut4401-B13

BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models

£1.95 (£2.34 inc VAT)

OEM: 27-4401

BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models Sleeve nut - locates in the gearbox outer cover to secure the return spring anchor...

Quantity:

+ −

CODE: screw0498-B18

BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models

£0.95 (£1.14 inc VAT)

OEM: 02-0498, 2-498

BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models Inspection cover plate screw used in conjunction with the 3 longer stepped...

Quantity:

+ −

CODE: thrust-wash0685-B18

BSA Crankshaft Thrust Washer - A50 and A65 Models Circa 1966-72

£21.95 (£26.34 inc VAT)

OEM: 68-0685, 68-685

BSA Crankshaft Thrust Washer - A50 and A65 Models Circa 1966-72 Bronze thrust washer that supports the crankshaft main bearing - correct fitment on...

Quantity:

+ −

CODE: bearing6003

6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width

£2.95 (£3.54 inc VAT)

OEM: 6300

6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width Open type bearing without seals to allow for the free circulation of either oil or...

Quantity:

+ −

CODE: bearing6005

6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width

£2.95 (£3.54 inc VAT)

OEM: 6300

6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width Open type bearing without seals to allow for the free circulation of either oil or...

Quantity:

+ −

CODE: camshaft0695-B7

BSA Camshaft - A7 and Star Twin Models Circa 1947-51 - Standard Profile

£149.95 (£179.94 inc VAT)

OEM: 67-0695, 67-695

BSA Camshaft - A7 and Star Twin Models Circa 1947-51 - Standard Profile Hepolite billet camshaft - correct fitment on long stroke models circa 1949-51....

Quantity:

+ −

CODE: gear0050-B18

BSA Crankshaft Oil Pump Drive Gear - A50 and A65 Models Circa 1962-72

£31.95 (£38.34 inc VAT)

OEM: 68-0050, 68-50

BSA Crankshaft Oil Pump Drive Gear - A50 and A65 Models Circa 1962-72 Left hand oil pump worm drive pinion, as fitted to all A50 and A65 models. OD:...

Quantity:

+ −

CODE: gear0339-B18

BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models

£43.95 (£52.74 inc VAT)

OEM: 67-0339, 67-339

BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models 22 tooth crankshaft timing gear as used on all A50 and A65 models...

Quantity:

+ −

CODE: wash0645-B18

BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models

£2.45 (£2.94 inc VAT)

OEM: 67-0645, 67-645

BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...

Quantity:

+ −

CODE: enginestud-3695-B14

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69

£4.45 (£5.34 inc VAT)

OEM: 70-3695, E3695

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69 Locates between the engine mounting plates on 3TA, 5TA, T90 and T100 models circa...

Quantity:

+ −

70-2873, E2873 - Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2873-B19

Triumph Short Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2873, E2873

Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile outer fixing cylinder head bolt as used on alloy...

Quantity:

+ −

CODE: rocker006B-B4

Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models

£14.95 (£17.94 inc VAT)

OEM: 70-1564, E1564, 40-0968

Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models Premium quality polished billet alloy with hexagonal head...

Quantity:

+ −

CODE: bearing0010-B8

BSA Bantam Crankshaft Main Drive Side Ball Bearing - D1, D3, D5 and D7 Models

£6.95 (£8.34 inc VAT)

OEM: 90-0010, 90-10

BSA Bantam Crankshaft Main Drive Side Ball Bearing - D1, D3, D5 and D7 Models Deep groove open type ball bearing. Outer drive side ball bearing - engine...

Quantity:

+ −

CODE: oilseal0147

BSA Bantam Crankshaft Alternator Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175

£2.45 (£2.94 inc VAT)

OEM: 90-0147, 90-147

BSA Bantam Crankshaft Alternator Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Alternator side oil seal on D1, D3, D5, D7, D10, D14 and...

Quantity:

+ −

CODE: wash1031-B18

Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56

£1.95 (£2.34 inc VAT)

OEM: 57-1031, T1031

Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...

Quantity:

+ −

70-2874, E2874 - Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

CODE: bolt2874-B19

Triumph Long Cylinder Head Bolt - Pre Unit 500/650cc Alloy Head Models Circa 1951-62

£5.95 (£7.14 inc VAT)

OEM: 70-2874, E2874

Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile inner fixing cylinder head bolt as used on alloy...

Quantity:

+ −

70-3072, E3072, GS326 - Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1950-62 - Made in England by Morgo

CODE: pump-mor-13

Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo

£89.95 (£107.94 inc VAT)

OEM: 70-3072, E3072, GS326

Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...

Quantity:

+ −

CODE: pump-mor-12

Triumph Plunger Type Oil Pump - Pre War 250/350/500cc Singles Circa 1934-39

£109.95 (£131.94 inc VAT)

OEM: 70-0855, 70-1353, E855, E1353

Triumph Plunger Type Oil Pump - Pre War 250/350/500cc Singles Circa 1934-39 A high performance dual plunger oil pump for early Triumph singles including:...

Quantity:

+ −

CODE: c/s-tube1220-B18

BSA Crankshaft Sludge Trap / Oil Tube - A10 Models Circa 1958-62 + Earlier A50 and A65 Models

£19.95 (£23.94 inc VAT)

OEM: 67-1220

BSA Crankshaft Sludge Trap / Oil Tube - A10 Models Circa 1958-62 + Earlier A50 and A65 Models Large journal crankshaft oil tube, sludge trap. Correct...

Quantity:

+ −

CODE: bolt3809-B13

Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74

£4.95 (£5.94 inc VAT)

OEM: 70-3809, E3809

Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...

Quantity:

+ −

CODE: screw1907-B19

Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards

£0.95 (£1.14 inc VAT)

OEM: 21-1907, 14-7020, S1907

Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards Inner gearbox cap screw on later T120 and TR6 models + all T140 and TR7...

Quantity:

+ −

CODE: stud2149-B19

Triumph Gearbox Inner Cover Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards

£2.45 (£2.94 inc VAT)

OEM: 21-2149, S2149

Triumph Gearbox Inner Cover Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase to gearbox stud as used on later 650cc twins from...

Quantity:

+ −

CODE: bear6301

Ball Bearing 6301-2RS

£3.45 (£4.14 inc VAT)

Ball Bearing 6301-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 37mm ID: 12mm Width: 12mm OEM:

Quantity:

+ −

CODE: seal359-B7

Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards

£7.95 (£9.54 inc VAT)

OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168

Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...

Quantity:

+ −

21-1921, S1921 - riumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74

CODE: stud1921-B19

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Shorter Type

£1.75 (£2.10 inc VAT)

OEM: 21-1921, S1921

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Shorter Type Correct fitment on unit 350/500cc models - T90, T100, T100C, T100R,...

Quantity:

+ −

CODE: stud1922-B19

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Longer Type

£1.75 (£2.10 inc VAT)

OEM: 21-1922, S1922

Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Longer Type Correct fitment on unit 350/500cc models - T90, T100, T100C, T100R,...

Quantity:

+ −

CODE: fkscrew209-B9

Stainless Steel Allen Screw Kit - BSA A50 and A65 Models From 1968 Onwards - UNC Threads

£15.95 (£19.14 inc VAT)

Stainless Steel Allen Screw Kit - BSA A50 and A65 Models From 1968 Onwards - UNC Threads Stainless steel UNC bolt set suitable for A50 and A65 models...

Quantity:

+ −

CODE: stud3819-B19

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Longer Type

£1.75 (£2.10 inc VAT)

OEM: 70-3819, E3819

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Longer Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Longer...

Quantity:

+ −

CODE: stud3820-B19

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Shorter Type

£1.75 (£2.10 inc VAT)

OEM: 70-3820, E3820

Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Shorter Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Shorter...

Quantity:

+ −

CODE: pump-mor-15

Ariel Plunger Type Oil Pump - 350/500/600cc Singles Circa 1929-58 - Made in England by Morgo

£119.95 (£143.94 inc VAT)

OEM: 2212-29F

Ariel Plunger Type Oil Pump - 350/500/600cc Singles Circa 1929-58 - Made in England by Morgo A high performance dual plunger oil pump for s uitable for...

Quantity:

+ −

CODE: wash0138-B18

BSA Oil Pump Stud Tab Washer - A50 and A65 Models Circa 1964-73

£0.95 (£1.14 inc VAT)

OEM: 76-0138, 76-138

BSA Oil Pump Stud Tab Washer - A50 and A65 Models Circa 1964-73 Tabbed lock washer - locates between the oil pump housing and the securing stud. Correct...

Quantity:

+ −

CODE: enginestud-2414-B19

Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59

£2.95 (£3.54 inc VAT)

OEM: 82-2414, F2414

Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59 Upper frame to engine mounting stud - locates in the boss on the front...

Quantity:

+ −

CODE: oilseal3006

BSA Bantam Gearbox / Sprocket Oil Seal - Three Speed D1, D3, D5, D7 and D10 Models

£3.95 (£4.74 inc VAT)

OEM: 89-3006

BSA Bantam Gearbox / Sprocket Oil Seal - Three Speed D1, D3, D5, D7 and D10 Models Gearbox oil seal - locates between the oil seal housing and crankcase....

Quantity:

+ −

CODE: seal352-B7

Oil Seal Set - Engine and Gearbox - BSA C15 and B40 Side Points Models - Circa 1964-66

£10.95 (£13.14 inc VAT)

OEM: 40-0025, 40-0243, 40-0679, 40-3281, 40-0977

Oil Seal Set - Engine and Gearbox - BSA C15 and B40 Side Points Models - Circa 1964-66 Suitable for C15 and B40 Sport Star models with side points circa...

Quantity:

+ −

CODE: seal350-B7

Oil Seal Set - Engine and Gearbox - BSA Bantam D1, D3, D5, D7 Models - Circa 1954-66

£7.95 (£9.54 inc VAT)

OEM: 90-0749, 90-0147, 89-3006

Oil Seal Set - Engine and Gearbox - BSA Bantam D1, D3, D5, D7 Models - Circa 1954-66 Suitable for three speed Bantam models as listed above. Kit...

Quantity:

+ −

CODE: bigend7509-B3

Triumph Super Cub / Bantam Cub Connecting Rod Big End Needle Bearing - Circa 1967-69

£19.95 (£23.94 inc VAT)

OEM: 70-7509, E7509

Triumph Super Cub / Bantam Cub Connecting Rod Big End Needle Bearing - Circa 1967-69 Needle roller con rod big end bearing - correct fitment on Triumph...

Quantity:

+ −

CODE: bigend6488

Triumph T20 Connecting Rod Big End Bush - SH and SM Tiger Cub Models - Circa 1964-68

£9.95 (£11.94 inc VAT)

OEM: 70-6488, E6488

Triumph T20 Connecting Rod Big End Bush - SH and SM Tiger Cub Models - Circa 1964-68 Correct fitment on later Tiger Cub models from engine number 99720....

Quantity:

+ −

70-4098, E4098 - 5/16" CEI - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68

CODE: bolt4098-B14

5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68

£2.45 (£2.94 inc VAT)

OEM: 70-4098, E4098

5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68 Small hex, part threaded crankcase bolt. One bolt required on unit...

Quantity:

+ −

CODE: pmp223

BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62

£239.95 (£287.94 inc VAT)

OEM: 65-2589, 65-2619

BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...

Quantity:

+ −

68-0310, 68-310 - BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72

CODE: tach0310-G15

BSA Oil Pump to Tachometer Worm Drive Spindle - A50 and A65 Models Circa 1964-72

£53.95 (£64.74 inc VAT)

OEM: 68-0310, 68-310

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Oil pump to rev counter/tacho driving spindle. Locates within the oil pump and...

Quantity:

+ −

CODE: o/filt68-8328

BSA Oil Tank Filter - A50 and A65 Circa 1962-70 + Early B44 Models - Pre 1967

£29.95 (£35.94 inc VAT)

OEM: 68-8328, 83-1387, 83-3331

BSA Oil Tank Filter - A50 and A65 Circa 1962-70 + Early B44 Models - Pre 1967 Threaded gauze oil filter plug - correct fitment on A50 and A65 models +...

Quantity:

+ −

CODE: pmp224

Triumph BSA Oil Pump Assembly - 750cc Triples Circa 1968-76

£224.95 (£269.94 inc VAT)

OEM: 71-1351, E11351, 70-9001, E9001

Triumph BSA Oil Pump Assembly - 750cc Triples Circa 1968-76 Complete oil pump assembly suitable for T150 and T160 Trident models, X75 Hurricane and A75...

Quantity:

+ −

CODE: seal351-B7

Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71

£9.95 (£11.94 inc VAT)

OEM: 90-0749, 90-0147, 89-3006, 86-8769

Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71 Suitable for three or four speed D10 and D14 Bantam models. Kit...

Quantity:

+ −

CODE: c/s-tube3999-B13

Triumph Crankshaft Sludge / Oil Tube - 350/500cc Unit Twins Circa 1959-74

£9.95 (£11.94 inc VAT)

OEM: 70-3999, E3999

Triumph Crankshaft Sludge / Oil Tube - 350/500cc Unit Twins Circa 1959-74 Crankshaft oil tube, sludge trap - correct fitment on 3TA, 5TA and T100 models...

Quantity:

+ −

CODE: plug1034-B18

BSA / Triumph Gearbox Drain Plug and O Ring - A50/A65 Models + Unit Singles Circa 1968

£4.45 (£5.34 inc VAT)

OEM: 40-1034, 68-3168, 57-2696, T2696, 57-2697, T2697

BSA / Triumph Gearbox Drain Plug and O Ring - A50/A65 Models + Unit Singles Circa 1968 Original type gearbox drain plug as used on A50/A65 models + early...

Quantity:

+ −

CODE: seal3168

O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications

£0.45 (£0.54 inc VAT)

OEM: 68-3168, 57-2697, T2697

O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA/Triumph models including drain plug seal on some...

Quantity:

+ −

CODE: plug3190-B13

BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67

£5.95 (£7.14 inc VAT)

OEM: 40-3190

BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67 Correct fitment on C15, B25, C25, B40, B44 models from 1965-67. Thin hexagon head -...

Quantity:

+ −

CODE: sw086-PREM-B18

Triumph Oil Pressure Switch Triumph - Veglia Type With Straight / Parallel Threads

£9.95 (£11.94 inc VAT)

OEM: 60-3719, D3719, 19-6508, PS5330/1/03

Triumph Oil Pressure Switch Triumph - Veglia Type With Straight / Parallel Threads As fitted to later T100 + T140, TR7, TSS, TSX, T150 and T160 models...

Options

PS5320/6, 60-2133, D2133, 19-6504, 5300/1/07 - Oil Pressure Switch - Smiths Type With Taper Thread

CODE: sw085-UK-B18

Triumph/BSA Oil Pressure Switch - Smiths Type With Taper Thread

£9.95 (£11.94 inc VAT)

OEM: PS5320/6, 60-2133, D2133, 19-6504, 5300/1/07

Triumph/BSA Oil Pressure Switch - Smiths Type With Taper Thread As fitted to unit A50, A65, T120, TR6, T90, T100 models circa 1969-73. Also used on some...

Quantity:

+ −

CODE: oilseal8023

Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins

£2.95 (£3.54 inc VAT)

OEM: 048023, D12/913, T2124, 04-8023

Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins Mainshaft oil seal - locates in the crankcase timing cover. Correct fitment on...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

Account Details

Quick Links

Feked.com

Feked Online