.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

engine213-B18
£1.25 (£1.50 inc VAT)
OEM: 82-9435, F9435
Triumph Oil Metering Screw - 82-9435 Oil metering screw for the Triumph OEM: 82-9435, F9435
+

screwkit-84-B9
£15.95 (£19.14 inc VAT)
Posi Drive Screw Engine Screw Kit - Triumph T140V 750cc twins 1974-1978 Triumph 750 T140V twins 1974-1978 Complete Set, as shown in photo OEM: 14-6608 x...
+

cambush0287-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0287
Triumph 650/750cc Camshaft Bush Left Hand - 71-0287 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

washer4075-B13
£9.95 (£11.94 inc VAT)
OEM: 42-4075
BSA Gearbox Locking Washer - 42-4075 Used on the BSA A10 and A7 gearbox to frame. OEM: 42-4075
+

spacer830-B18
£0.75 (£0.90 inc VAT)
OEM: 70-3448, E3448
Alternator Spacer - Triumph - 70-3448 OEM: 70-3448, E3448
+

camshaft-7017-B7
£64.95 (£77.94 inc VAT)
OEM: 71-7017, E17017
Triumph T140 Exhaust Camshaft - 71-7017 To suit Triumph T140 750cc motorcycles Nitrided Camshaft, Quality Product. OEM: 71-7017, E17017
+

camshaft-7016-B7
£64.95 (£77.94 inc VAT)
OEM: 71-7016, E17016
Triumph T140 Inlet Camshaft - 71-7016 To suit Triumph T140 750cc motorcycles Nitrided Camshaft, Quality Product. OEM: 71-7016, E17016
+

bear438-F4
£45.95 (£55.14 inc VAT)
OEM: 60-7362
Crankshaft Main Bearing Triumph 750cc Timing Side - 60-7362 Crankshaft Timing side roller bearing T140, TR7, TR7T Trails models OEM: 60-7362
+

camshaft-9989-B7
£69.95 (£83.94 inc VAT)
OEM: 70-9989, E9989, 70-5048, E5048
Triumph 650cc Exhaust Half Race Camshaft - 70-9989 To suit Triumph 650cc motorcycles Triumph T120, T120R, TR6 etc Nitrided Camshaft, Quality Product. OEM:...

washer4262
£0.45 (£0.54 inc VAT)
OEM: 60-4262, PT104B, D4262
Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...
+

washer1880
£0.85 (£1.02 inc VAT)
OEM: 82-1880, F1880
Triumph Copper Sealing Washer - 82-1880 Used in various places on Triumph engines, including the sump bolt washer. OEM: 82-1880, F1880
+

plug2167-B13
£4.45 (£5.34 inc VAT)
OEM: 57-2167, T2167
Triumph Gearbox Oil Level Drain Plug with Tube - 650/750cc - 1970 onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards. Also fits...
+

seal2640
£1.00 (£1.20 inc VAT)
OEM: 60-2640, D2640
O RING - Triumph Gear Shaft - 60-2640 Fits in the primary chain case, for the gearshaft hole. OEM: 60-2640, D2640
+

enginestud-1866-B19
£7.95 (£9.54 inc VAT)
OEM: 21-1866
Long Alternator Mounting Stud Triumph 650 Twins - 1969-74 Fits later 650 Twins from 1969-74 Made in England OEM: 21-1866
+

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

enginestud-239-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1867
Short Alternator Mounting Stud Triumph 650 Twins - 1967 onwards Fits 650 Unit Twins from 1967 onwards OEM: 21-1867
+

screwkit-83-B9
£28.95 (£34.74 inc VAT)
OEM: 70-3436, E3436, 70-3437, E3437, 70-3438, E3437, 70-3439, E3439, 70-3442, E3442, 70-3441, E3441, 70-3444, E3444
Fillister Engine/Gearbox Screw Kit - Triumph Pre Unit Twins 1954-62 Complete Set of 34 Screws, as shown in photo Fillister Head - 3/8" 1/4" Whitworth...
+

wash2521-B13
£1.25 (£1.50 inc VAT)
OEM: 65-2521
BSA Engine Mainshaft Lock Washer - B31, A10, A7 ID for shaft size 7/8" OD: 1+9/16" Made in England OEM: 65-2521
+

cap004-B4
£6.95 (£8.34 inc VAT)
OEM: 01-4457
AJS/Matchless Primary Chaincase Inspection Cap Suitable for AJS/Matchless Models with the Pressed Steel Chaincase Screw in fixing and bar under the cap...
+

cap063-B4
£13.95 (£16.74 inc VAT)
BSA Chaincase Inspection Cap - B & M Group Models BSA Primary Chaincase Inspection Nut - Suit most B and M Models - B31, B32, B33 and M20, M21 Thread...
+

wash5315-B13
£2.45 (£2.94 inc VAT)
OEM: 70-5315
Oil Sump Filter Gauze Copper Washer - Triumph 650cc + 750cc Unit Twins Copper washer to fit Oil Filter Gauze 650 and 750cc Triumph Models - T120, TR6,...
+

enginestud-2199-B19
£5.95 (£7.14 inc VAT)
OEM: 21-2199
Long Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from...
+

enginestud-2198-B19
£4.95 (£5.94 inc VAT)
OEM: 21-2198
Short Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from 1972-82....
+

pipe1614-B2
£8.45 (£10.14 inc VAT)
OEM: 83-1614, F11614
Triumph 'D' Type Crankcase Breather Hose/Pipe - Unit Twins - 1970-73 As fitted on T100/T120/TR6 Oil in frame models Silver coloured 'D' shaped pipe...
+

pipe5285-B2
£1.95 (£2.34 inc VAT)
OEM: 83-5285, F15285
Triumph 'D' Type Crankcase Breather Hose/Pipe - T140/TR7 - 1974-78 This hose runs from the crankcase to the 'T' piece As fitted to 750cc T140/TR7 Tiger...
+

pipe4813
£9.95 (£11.94 inc VAT)
OEM: 83-4813, F14813
Triumph 'D' Type Crankcase Breather Hose/Pipe - T140/TR7 - 1974-78 This hose runs along the rear mudguard after the 'T' piece As fitted to 750cc T140/TR7...
+

pipe1149-B3
£3.45 (£4.14 inc VAT)
OEM: 71-1149, E1149
Triumph Front Crankcase Breather Hose/Pipe - 500/650/750cc Twins - 1969-78 Attaches to the breather stub on your crankcase (primary side) Silver...
+

bear0670-F4
£24.95 (£29.94 inc VAT)
OEM: 67-0670
BSA A7 and BSA A10 Crankshaft bearing Drive Side. To suit BSA models including Shooting Star, Gold Flash, Rocket, Road Rocket, R130L. Also fits Ariel 650cc...
+

screw4255-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Patent Plate Hammer Drive Screw/Rivet Set Set of three correct hammer drive screws to secure the timing cover triangular name plate on all 500,...
+

pipe5115-B2
£6.45 (£7.74 inc VAT)
OEM: 83-4122, 83-5114, 83-5115
BSA Breather Hose/Pipe - All B50 Models - 1969 onwards Attaches to the breather stub on your crankcase (primary side) Silver coloured round profile...
+

pipe7387-B2
£9.95 (£11.94 inc VAT)
OEM: 83-7387
Triumph 'D' Type Rear Mudguard Breather Hose/Pipe - T140/TR7 1977 Onwards Silver coloured 'D' shaped pipe Approximately 52" (132cm) ID: 1/2" (13mm) OD:...
+

screwkit-85-B9
£14.95 (£17.94 inc VAT)
OEM: 14-2203, 14-6608, 14-6609, 14-7023, 14-7020, 21-1878, 14-6620
Posi Drive Screw Engine Screw Kit - Triumph 650cc twins T120, TR6 -1971-72 Screw set to secure the primary, gearbox and timing cover on unit twins...
+

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

nut1302-B14
£0.95 (£1.14 inc VAT)
OEM: 14-1302, 21-1852, S1852
5/16" UNF Self-Locking Cleveloc Nut - Thin Type 5/16" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1302, 21-1852, S1852
+

wash2330
£0.25 (£0.30 inc VAT)
OEM: 60-2330, 60-4247, 54-0055, D4247, D2330
5/16" Plain Washer - Thin Type  - 1/16" Thickness ID: 1/2" (12.8mm) OD: 5/8" (15.7mm) Thickness: 1/16", 0.05" (1.2mm) OEM: 60-2330, 60-4247, 54-0055,...
+

bolt-set0011-B14
£23.95 (£28.74 inc VAT)
OEM: 36-0011, 36-11
Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards High quality BZP plated high tensile bolts with correct shanks for use with alloy heads...
+

plug2259-B13
£4.95 (£5.94 inc VAT)
OEM: 57-2259, T2259
Triumph Primary Chain Oil Drain and Adjuster Plug - 650/750cc - 1969 Onwards Triumph Unit Twins - T120 from 1969-72, T140 from 1973-79. 7/16" UNC Thread...
+

filt7584-B3
£22.95 (£27.54 inc VAT)
OEM: 71-7584, 71-3316, E17584, E13316
Triumph Sump Plate - 750cc OIF Models from 1973 Onwards This is the later type with UNC thread to fit T140, TR7, it requires a 1/2" x 13 TPI drain bolt...
+

wash2441
£0.95 (£1.14 inc VAT)
OEM: 70-2441, 60-7132, E2441, D7132
1/4" (6.35mm) Annealed Copper Washer - Various Applications ID: 1/4" (6.35mm) OD: 7/16" (11mm) OEM: 70-2441, 60-7132, E2441, D7132
+

bolt0543-B18
£0.95 (£1.14 inc VAT)
OEM: 21-0543, S543
Triumph Gearbox Oil Level Drain Plug Bolt - 650/750cc - 1970 Onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards + Trident models...
+

bolt1872-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1872, S1872
Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...
+

seal3761
£0.75 (£0.90 inc VAT)
OEM: 37-3761, W3761
O Ring - Nitrile Seal - ID: 7/6", OD: 1/2" - Various Applications ID: 7/6" (10.8mm) OD: 1/2" (12.4mm) OEM: 37-3761, W3761
+

seal3616
£0.95 (£1.14 inc VAT)
OEM: 60-3616, D3616
Triumph/BSA Oil Filler Cap O Ring - Unit Models from 1971-83 O Ring Seal to fit oil filler cap on Triumph/BSA OIF models from 1971 on OD: 1+1/4" (32mm)...
+

bolt6608-B13
£1.45 (£1.74 inc VAT)
OEM: 14-6608
Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards Length 1" x 1/4'' UNC thread Made in England OEM: 14-6608
+

nut1303-B14
£1.45 (£1.74 inc VAT)
OEM: 14-1303, 06-3024
3/8" UNF Self-Locking Cleveloc Nut - Thin Type 3/8" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1303, 06-3024
+

pump-gkt-3910
£0.75 (£0.90 inc VAT)
OEM: 71-3910, E13910
Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83 Suitable for models with 4 valve oil pump. Can also be used on 2 valve oil pumps as...
+

screw0688-B4
£0.75 (£0.90 inc VAT)
OEM: 97-0688, H688
Triumph Slotted Nacelle Motif / Gear Pointer Screw - 5BA x 1/4" Full thread 1/4" UH (6.7mm) OEM: 97-0688, H688
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.