Engine & Transmission :: Engine Lower

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

Home/Engine & Transmission/Engine Lower

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Country

State/Province

City

Zip/postal code

Get rates

Engine Lower

CODE: bear6301

Ball Bearing 6301-2RS

£3.45 (£4.14 inc VAT)

Ball Bearing 6301-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 37mm ID: 12mm Width: 12mm OEM:

Quantity:

+ −

CODE: tach0586-G15

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72

£35.95 (£43.14 inc VAT)

OEM: 68-0586, 68-586

BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Tachometer spindle drive shaft with groove for circlip and square end -...

Quantity:

+ −

CODE: camshaft0695-B7

BSA Camshaft - A7 and Star Twin Models Circa 1947-51 - Standard Profile

£149.95 (£179.94 inc VAT)

OEM: 67-0695, 67-695

BSA Camshaft - A7 and Star Twin Models Circa 1947-51 - Standard Profile Hepolite billet camshaft - correct fitment on long stroke models circa 1949-51....

Quantity:

+ −

CODE: fkscrew225-B9

Stainless Steel Allen Screw Kit - Triumph 350cc & 500cc twins 1968

£15.95 (£19.14 inc VAT)

Stainless Steel Allen Screw Kit - Triumph 350cc & 500cc twins Triumph 350/500 Unit construction twins (1968-) Complete Set, includes allen keys....

Quantity:

+ −

CODE: fkscrew228-B9

Stainless Steel Allen Screw Kit - Triumph T20 Cub side points

£13.95 (£16.74 inc VAT)

Stainless Steel Allen Screw Kit - Triumph T20 Cub side points engine Triumph T20 Cub side points engine Complete Set, includes allen keys. Stainless...

Quantity:

+ −

CODE: gear0339-B18

BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models

£43.95 (£52.74 inc VAT)

OEM: 67-0339, 67-339

BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models 22 tooth crankshaft timing gear as used on all A50 and A65 models...

Quantity:

+ −

CODE: wash1031-B18

Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56

£1.95 (£2.34 inc VAT)

OEM: 57-1031, T1031

Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...

Quantity:

+ −

CODE: oilseal0147

BSA Bantam Crankshaft Alternator Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175

£2.45 (£2.94 inc VAT)

OEM: 90-0147, 90-147

BSA Bantam Crankshaft Alternator Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Alternator side oil seal on D1, D3, D5, D7, D10, D14 and...

Quantity:

+ −

CODE: bearing0010-B8

BSA Bantam Crankshaft Main Drive Side Ball Bearing - D1, D3, D5 and D7 Models

£6.95 (£8.34 inc VAT)

OEM: 90-0010, 90-10

BSA Bantam Crankshaft Main Drive Side Ball Bearing - D1, D3, D5 and D7 Models Deep groove open type ball bearing. Outer drive side ball bearing - engine...

Quantity:

+ −

CODE: rocker006B-B4

Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models

£14.95 (£17.94 inc VAT)

OEM: 70-1564, E1564, 40-0968

Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models Premium quality polished billet alloy with hexagonal head...

Quantity:

+ −

CODE: enginestud-3695-B14

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69

£4.45 (£5.34 inc VAT)

OEM: 70-3695, E3695

Triumph Engine Mounting Stud - Unit 350/500cc Models Circa 1958-69 Locates between the engine mounting plates on 3TA, 5TA, T90 and T100 models circa...

Quantity:

+ −

CODE: wash0645-B18

BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models

£2.45 (£2.94 inc VAT)

OEM: 67-0645, 67-645

BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...

Quantity:

+ −

CODE: fkpipe035

Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber

£0.95 (£1.14 inc VAT)

Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...

Quantity:

+ −

CODE: fksump220-B3

BSA Sump Plate - M and B Models

£26.95 (£32.34 inc VAT)

OEM: 65-2611

BSA Sump Plate - M and B Models Suit B & M Models of BSA Finned cast alloy sump plate with magnetic drain plug. Comes with Gasket, Brass magnetic sump...

Quantity:

+ −

CODE: gear0050-B18

BSA Crankshaft Oil Pump Drive Gear - A50 and A65 Models Circa 1962-72

£31.95 (£38.34 inc VAT)

OEM: 68-0050, 68-50

BSA Crankshaft Oil Pump Drive Gear - A50 and A65 Models Circa 1962-72 Left hand oil pump worm drive pinion, as fitted to all A50 and A65 models. OD:...

Quantity:

+ −

CODE: bearing6005

6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width

£2.95 (£3.54 inc VAT)

OEM: 6300

6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width Open type bearing without seals to allow for the free circulation of either oil or...

Quantity:

+ −

CODE: bearing6003

6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width

£2.95 (£3.54 inc VAT)

OEM: 6300

6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width Open type bearing without seals to allow for the free circulation of either oil or...

Quantity:

+ −

CODE: thrust-wash0685-B18

BSA Crankshaft Thrust Washer - A50 and A65 Models Circa 1966-72

£21.95 (£26.34 inc VAT)

OEM: 68-0685, 68-685

BSA Crankshaft Thrust Washer - A50 and A65 Models Circa 1966-72 Bronze thrust washer that supports the crankshaft main bearing - correct fitment on...

Quantity:

+ −

CODE: screw0498-B18

BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models

£0.95 (£1.14 inc VAT)

OEM: 02-0498, 2-498

BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models Inspection cover plate screw used in conjunction with the 3 longer stepped...

Quantity:

+ −

CODE: nut4401-B13

BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models

£1.95 (£2.34 inc VAT)

OEM: 27-4401

BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models Sleeve nut - locates in the gearbox outer cover to secure the return spring anchor...

Quantity:

+ −

CODE: nut3034-B13

BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon

£0.75 (£0.90 inc VAT)

OEM: 67-3034

BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon Reduced hex nut that secures the gearbox outer cover on A7 and A10 plunger...

Quantity:

+ −

CODE: screw3821-B13

2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles

£0.45 (£0.54 inc VAT)

OEM: 70-3821, E3821, 40-0246

2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles Oil seal housing countersunk screw as used on 3TA, 5TA, T100,...

Quantity:

+ −

27-4258 - BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models

CODE: screw4258-B13

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models From 1938 Onwards

£3.95 (£4.74 inc VAT)

OEM: 27-4258

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models Stepped hex head screw that secures the gearbox inspection cover plate - correct...

Quantity:

+ −

CODE: bolt4539-B13

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68

£0.75 (£0.90 inc VAT)

OEM: 70-4539, E4539

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68 Crankcase level plug / bolts - locates in the lower mid section of the crankcase below...

Quantity:

+ −

1 2 3 4 5 6 7 8 9 10 11 12

Next 6 - 20

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

Account Details

Quick Links

Feked.com

Feked Online