.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

bolt6220-B14
£1.25 (£1.50 inc VAT)
OEM: 14-6220
5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220 As used on various Triumph models - crankcase clamping bolt on unit twins and triples circa...
+

shim1707-B13
£1.25 (£1.50 inc VAT)
OEM: 66-1707
BSA Cush Drive Bearing Alignment Washer - B & M Group Models - 1940-63 0.32" cush drive bearing to engine sprocket washer as used on B31, B32, B33,...
+

stud1864-B19
£1.25 (£1.50 inc VAT)
OEM: 21-1864, S1864
Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Oil pump body to crankcase fixing stud with UNF/UNC...
+

screw2162-B19
£1.25 (£1.50 inc VAT)
OEM: 21-2162, S2162
Triumph Gearbox Outer Cover Screw - T140 and TR7 Models Circa 1973-78 Outer gearbox cover to crankcase long cheese head pozi drive screw. Correct fitment...
+

nut2412-B14
£1.45 (£1.74 inc VAT)
OEM: 70-2412, E2412
Fork Leg & Cylinder Base Nut - Triumph - 70-2412 For various Triumphs Premium Quality - Made in England OEM: 70-2412, E2412
+

screw4255-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Patent Plate Hammer Drive Screw/Rivet Set Set of three correct hammer drive screws to secure the timing cover triangular name plate on all 500,...
+

bolt6608-B13
£1.45 (£1.74 inc VAT)
OEM: 14-6608
Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards Length 1" x 1/4'' UNC thread Made in England OEM: 14-6608
+

nut1303-B14
£1.45 (£1.74 inc VAT)
OEM: 14-1303, 06-3024
3/8" UNF Self-Locking Cleveloc Nut - Thin Type 3/8" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1303, 06-3024
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

pumpgkt1393
£1.45 (£1.74 inc VAT)
OEM: 67-1393
BSA Oil Pump Gasket - A7 and A10 Models Circa 1949-63 Correct fitment on 500/650cc pre unit twins. Made in England OEM: 67-1393
+

bolt7064-B13
£1.45 (£1.74 inc VAT)
OEM: 21-7064, S7064
Triumph Primary Chain Adjuster Bolt - T140 and TR7 Models from 1980 Onwards Primary chain adjuster screw as fitted to later Triumph 750cc twins. Length...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

screw4255-brass-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...
+

dowel3074-B13
£1.45 (£1.74 inc VAT)
OEM: 66-3074, 70-8010, E8010
BSA Gearbox Cover / Primary Chaincase / Timing Cover Dowel - Various Models From 1949 Onwards Hollow locating dowel used to align the various cases and...
+

dowel0989-B18
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+

engine836-B18
£1.75 (£2.10 inc VAT)
OEM: 70-4569
Triumph Contact point Circlip - 70-4569 Circlip for Contact point seal. Fits Triumph 650cc and 750cc models. OEM: 70-4569
+

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

nut1310-B14
£1.75 (£2.10 inc VAT)
OEM: 70-1310, E1310, 82-1008, F1008
Triumph Nut - 5/16" x 26TPI - Oil Block to Crankcase Unit Twins + Other Uses 5/16" x 26TPI  small hexagon thin wall nut. OEM: 70-1310, E1310,  82-1008,...
+

nut-DS47-B14
£1.75 (£2.10 inc VAT)
OEM: DS47, DS-47
7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

bolt0361-B18
£1.75 (£2.10 inc VAT)
OEM: 57-0361, T361
Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....
+

stud1921-B19
£1.75 (£2.10 inc VAT)
OEM: 21-1921, S1921
Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Shorter Type Correct fitment on unit 350/500cc models -  T90, T100, T100C, T100R,...
+

stud1922-B19
£1.75 (£2.10 inc VAT)
OEM: 21-1922, S1922
Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Longer Type Correct fitment on unit 350/500cc models -  T90, T100, T100C, T100R,...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.