.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

seal136-C13
£1.95 (£2.34 inc VAT)
OEM: 70-3876
OIL SEAL - Triumph Crankshaft D/S Oil seal for Triumph 3TA/5TA/T90/T100 (1957-72), T120/TR6 (1963-70). OEM: 70-3876
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

gkt1529
£0.75 (£0.90 inc VAT)
OEM: 70-1529, E1529
Triumph Oil Feed Block Gasket - Pre Unit Models Triumph pre-unit twins - 350, 500, 650cc OEM: 70-1529, E1529
+

bolt401-B19
£1.95 (£2.34 inc VAT)
OEM: 14-1401
Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401
+

pmp7317-B13
£79.95 (£95.94 inc VAT)
OEM: 71-7317, E17317
Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards Complete four valve oil pump assembly with pump...
+

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

bigend211-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, B2026M, E3586
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

camshaft3134-B7
£69.95 (£83.94 inc VAT)
OEM: 70-3134, E3134, 71-1063, E11063, 70-4819, E4819
Triumph Inlet Camshaft - Unit 650cc Models from 1963-72 + Pre Unit 650cc to 1962 To suit many Triumph 650cc models - T120, T120R, TR6 etc Nitrided...

bolt716-B19
£3.45 (£4.14 inc VAT)
OEM: 70-0327
Triumph T120, TR6 etc, 650cc Cylinder head bolt (outer bolt) OEM: 70-0327
+

fksump220-B3
£26.95 (£32.34 inc VAT)
OEM: 65-2611
BSA Sump Plate - M and B Models Suit B & M Models of BSA Finned cast alloy sump plate with magnetic drain plug. Comes with Gasket, Brass magnetic sump...
+

bolt660-B19
£3.95 (£4.74 inc VAT)
OEM: 70-1596
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension) OEM: 70-1596
+

filt407-B7
£49.95 (£59.94 inc VAT)
OEM: 19-4589, 99-1179
Triumph Sump Plate / Oil Filter Kit - 650/750cc Oil in Frame Models Complete kit containing: Billet alloy sump plate Oil filter base plate Oil...
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

nut3735-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735
+

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

pillarbolt513-B19
£1.95 (£2.34 inc VAT)
OEM: 40-0683, 70-4747
Contact breaker pillar bolt. To secure the contact points set on side points models, also secures the points cover. Fits BSA C15/B44/B50 and Triumph...
+

nut997-B18
£5.45 (£6.54 inc VAT)
OEM: 67-1211
BSA Large Journal Crankshaft Sludge Trap Plug - A10, A50 and A65 Models  To fit large journal crankshafts as used on pre-unit A10 models from 1958-62 and...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

bigend212-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, 70-3510, B2026M, E3586, E3510
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 020 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

seal255
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+

nut262-B18
£4.95 (£5.94 inc VAT)
OEM: 70-3905, E3905
Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905
+

filt060-B2
£23.95 (£28.74 inc VAT)
OEM: 83-2646, 84-0027, 83-4783
Triumph T140 Bonneville Oil Sump Gauze Fits early model T140. Normally uses 2 gaskets when you replace this, one each side. See related gasket below OEM:...
+

nut263-B18
£5.95 (£7.14 inc VAT)
OEM: 70-9492, E9492
Triumph Crankshaft Sludge Trap Plug - Unit 300/500cc Twins Circa 1959-74 Hex oil tube plug - correct fitment on 3TA, 5TA and T100 models from 1959...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.