.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

stud0669
£4.45 (£5.34 inc VAT)
OEM: 21-0669, S669
Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase front stud - secures the exhaust pipe stays. As...
+

oilseal0284
£3.45 (£4.14 inc VAT)
OEM: 90-0284, 90-284
BSA Bantam Crankshaft Drive Side Oil Seal - D1, D3 Models - Pre 1954 Crankshaft drive side oil seal as used on early D1 and D3 models - locates between...
+

g/box3396-G15
£27.95 (£33.54 inc VAT)
OEM: 65-3396
BSA Speedometer Driven Gear Bush - A7 / A10 Models Circa 1960-62 + Early A50 / A65 Models Speedo driven gear with recess for rubber sealing washer -...
+

nut1593-A17
£4.95 (£5.94 inc VAT)
OEM: 90-1593
BSA Bantam Alternator Stator Sleeve Nut - D10, D14 and B175 Models Hexagonal front alternator mounting sleeve nut suitable for bikes running the original...
+

plug3190-B13
£5.95 (£7.14 inc VAT)
OEM: 40-3190
BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67 Correct fitment on C15, B25, C25, B40, B44 models from 1965-67. Thin hexagon head -...
+

shim1707-B13
£1.25 (£1.50 inc VAT)
OEM: 66-1707
BSA Cush Drive Bearing Alignment Washer - B & M Group Models - 1940-63 0.32" cush drive bearing to engine sprocket washer as used on B31, B32, B33,...
+

oilseal8023
£2.95 (£3.54 inc VAT)
OEM: 048023, D12/913, T2124, 04-8023
Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins Mainshaft oil seal - locates in the crankcase timing cover. Correct fitment on...
+

seal3168
£0.45 (£0.54 inc VAT)
OEM: 68-3168, 57-2697, T2697
O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA/Triumph models including drain plug seal on some...
+

plug1034-B18
£4.45 (£5.34 inc VAT)
OEM: 40-1034, 68-3168, 57-2696, T2696, 57-2697, T2697
BSA / Triumph Gearbox Drain Plug and O Ring - A50/A65 Models + Unit Singles Circa 1968 Original type gearbox drain plug as used on A50/A65 models + early...
+

c/s-tube3999-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3999, E3999
Triumph Crankshaft Sludge / Oil Tube - 350/500cc Unit Twins Circa 1959-74 Crankshaft oil tube, sludge trap - correct fitment on 3TA, 5TA and T100 models...
+

seal351-B7
£9.95 (£11.94 inc VAT)
OEM: 90-0749, 90-0147, 89-3006, 86-8769
Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71 Suitable for three or four speed D10 and D14 Bantam models. Kit...
+

tach0310-G15
£53.95 (£64.74 inc VAT)
OEM: 68-0310, 68-310
BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Oil pump to rev counter/tacho driving spindle. Locates within the oil pump and...
+

o/filt68-8328
£29.95 (£35.94 inc VAT)
OEM: 68-8328, 83-1387, 83-3331
BSA Oil Tank Filter - A50 and A65 Circa 1962-70 + Early B44 Models - Pre 1967 Threaded gauze oil filter plug - correct fitment on A50 and A65 models +...
+

pmp223
£239.95 (£287.94 inc VAT)
OEM: 65-2589, 65-2619
BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...
+

bolt4098-B14
£2.45 (£2.94 inc VAT)
OEM: 70-4098, E4098
5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68 Small hex, part threaded crankcase bolt. One bolt required on unit...
+

bigend6488
£9.95 (£11.94 inc VAT)
OEM: 70-6488, E6488
Triumph T20 Connecting Rod Big End Bush - SH and SM Tiger Cub Models - Circa 1964-68 Correct fitment on later Tiger Cub models from  engine number 99720....
+

bigend7509-B3
£19.95 (£23.94 inc VAT)
OEM: 70-7509, E7509
Triumph Super Cub / Bantam Cub Connecting Rod Big End Needle Bearing - Circa 1967-69 Needle roller con rod big end bearing - correct fitment on Triumph...
+

seal350-B7
£7.95 (£9.54 inc VAT)
OEM: 90-0749, 90-0147, 89-3006
Oil Seal Set - Engine and Gearbox - BSA Bantam D1, D3, D5, D7 Models - Circa 1954-66 Suitable for three speed Bantam models as listed above. Kit...
+

seal352-B7
£10.95 (£13.14 inc VAT)
OEM: 40-0025, 40-0243, 40-0679, 40-3281, 40-0977
Oil Seal Set - Engine and Gearbox - BSA C15 and B40 Side Points Models - Circa 1964-66 Suitable for C15 and B40 Sport Star models with side points circa...
+

oilseal3006
£3.95 (£4.74 inc VAT)
OEM: 89-3006
BSA Bantam Gearbox / Sprocket Oil Seal - Three Speed D1, D3, D5, D7 and D10 Models Gearbox oil seal - locates between the oil seal housing and crankcase....
+

bolt3809-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3809, E3809
Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...
+

pmp224
£224.95 (£269.94 inc VAT)
OEM: 71-1351, E11351, 70-9001, E9001
Triumph BSA Oil Pump Assembly - 750cc Triples Circa 1968-76 Complete oil pump assembly suitable for T150 and T160 Trident models, X75 Hurricane and A75...
+

pumpgkt735
£1.00 (£1.20 inc VAT)
AJS Matchless Oil Pump Gasket Single cylinder models
+

sump-bolt-washer-set-B3
£3.45 (£4.14 inc VAT)
OEM: 31-222, 31-0222
BSA Alloy Sump Plate Securing Bolts - Non Standard To replace existing studs in crankcase, to allow fitment of the thicker cast-alloy or billet-alloy sump...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.