.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.
.

Useful & Interesting





SHIPPING COSTS SHIPPING COSTS

Get rates

Engine Lower

Price: Low to High
12 Per Page
S46-15 - riumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962
plug-S46-15-B18
Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1937-1962
£2.95 (£3.54 inc VAT)
OEM: S46-15
Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962 Correct fitment on pre unit 3T,  5T, 6T, TR5, T100, T110, T120 and TR6 models...
+ −
6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width
bearing6300
6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width
£2.95 (£3.54 inc VAT)
OEM: 6300
6300 - Open Deep Groove Ball Bearing - 10mm ID x 35mm OD x 11mm Width Open type bearing without seals to allow for the free circulation of either oil or...
+ −
6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width
bearing6003
6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width
£2.95 (£3.54 inc VAT)
OEM: 6300
6003 - Open Deep Groove Ball Bearing - 17mm ID x 35mm OD x 10mm Width Open type bearing without seals to allow for the free circulation of either oil or...
+ −
6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width
bearing6005
6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width
£2.95 (£3.54 inc VAT)
OEM: 6300
6005 - Open Deep Groove Ball Bearing - 15mm ID x 47mm OD x 12mm Width Open type bearing without seals to allow for the free circulation of either oil or...
+ −
82-2414, F2414 - Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59
enginestud-2414-B19
Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59
£2.95 (£3.54 inc VAT)
OEM: 82-2414, F2414
Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59 Upper frame to engine mounting stud - locates in the boss on the front...
+ −
048023, D12/913, T2124, 04-8023 - Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins
oilseal8023
Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins
£2.95 (£3.54 inc VAT)
OEM: 048023, D12/913, T2124, 04-8023
Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins Mainshaft oil seal - locates in the crankcase timing cover. Correct fitment on...
+ −
70-3933, E3933 - Triumph T20 Tiger Cub Gearbox Mainshaft Oil Seal Retainer - Circa 1957 Onwards
oilseal3933-B13
Triumph T20 Tiger Cub Gearbox Mainshaft Oil Seal Retainer - Circa 1957 Onwards
£2.95 (£3.54 inc VAT)
OEM: 70-3933, E3933
Triumph T20 Tiger Cub Gearbox Mainshaft Oil Seal Retainer - Circa 1957 Onwards Gearbox mainshaft shaft oil seal retainer - locates behind the clutch. OD:...
+ −
21-1871, S1871 - Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread
plug1871-B13
Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread
£2.95 (£3.54 inc VAT)
OEM: 21-1871, S1871
Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread Screw that plugs the hole in the drive side crankcase when a tachometer...
+ −
90-0012, 90-12 - BSA Bantam Gearbox Pinion Sleeve Bearing - All 3 and 4 Speed Models
bearing0012-F4
BSA Bantam Gearbox Pinion Sleeve Bearing - All 3 and 4 Speed Models
£2.95 (£3.54 inc VAT)
OEM: 90-0012, 90-12
BSA Bantam Gearbox Pinion Sleeve Bearing - All 3 and 4 Speed Models All Bantam D1, D3, D5, D7, D10, D14 and B175 models. Locates in the left hand /...
+ −
1/4" x 1/4" Big End Rollers
rollers192-B18
1/4inch Big End Bearing Rollers - 10 Pack
£2.99 (£3.59 inc VAT)
1/4" x 1/4" Big End Rollers Sold in packs of 10 rollers
+ −
Ball Bearing 6202-2RS - OEM: 90-6063, 57-0530
bear6202
Ball Bearing 6202-2RS
£2.99 (£3.59 inc VAT)
OEM: 90-6063, 57-0530
Ball Bearing 6202-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 35mm ID: 15mm Width: 11mm OEM: 90-6063, 57-0530
+ −
Ball Bearing 6001-2RS
bear6001-F4
Ball Bearing 6001-2RS
£2.99 (£3.59 inc VAT)
Ball Bearing 6001-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 28mm ID: 12mm Width: 8mm
+ −
1 - 15  Prev
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Next  17 - 31

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.