.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

enginestud-239-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1867
Short Alternator Mounting Stud Triumph 650 Twins - 1967 onwards Fits 650 Unit Twins from 1967 onwards OEM: 21-1867
+

enginestud-2199-B19
£5.95 (£7.14 inc VAT)
OEM: 21-2199
Long Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from...
+

pipe7387-B2
£9.95 (£11.94 inc VAT)
OEM: 83-7387
Triumph 'D' Type Rear Mudguard Breather Hose/Pipe - T140/TR7 1977 Onwards Silver coloured 'D' shaped pipe Approximately 52" (132cm) ID: 1/2" (13mm) OD:...
+

bolt0243-B18
£4.45 (£5.34 inc VAT)
OEM: 28-0243, 28-243
BSA Gearbox Drain Bolt - Pre Unit A, B and C Models from 1939 Onwards As used on many pre unit A, B and C models Overall Length: 5/8" (15.6mm) UH Length:...
+

pipe5290-B13
£9.45 (£11.34 inc VAT)
OEM: 83-5290, F15290
Triumph Breather Hose 'T' Piece - 750cc Unit Twins - 1974 Onwards Crankcase breather pipe connector for T140, TR7 Models from 1974 onwards. Small pipe...
+

stud0672-B19
£2.45 (£2.94 inc VAT)
OEM: 70-0672, E672
Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

pumpgkt2296
£1.95 (£2.34 inc VAT)
OEM: 71-2296, 68-0939, 68-939, 68-0293, 86-293
BSA Oil Pump Gasket - A50 and A65 Models Circa 1963-73 Correct fitment on 500/650cc unit twins. Made in England OEM: 71-2296, 68-0939, 68-939, 68-0293,...
+

sump-filt0486-B3
£10.95 (£13.14 inc VAT)
OEM: 70-0486, E486
Triumph Sump Plate - Pre-Unit 350/500/650cc Twins Circa 1939-62 - Original Type Original type crankcase oil filter cover - correct fitment on 3TA,  T90,...
+

pmp7317-B13
£79.95 (£95.94 inc VAT)
OEM: 71-7317, E17317
Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards Complete four valve oil pump assembly with pump...
+

pump-mor-15
£119.95 (£143.94 inc VAT)
OEM: 2212-29F
Ariel Plunger Type Oil Pump - 350/500/600cc Singles Circa 1929-58 - Made in England by Morgo A high performance dual plunger oil pump for s uitable for...
+

o/filt68-8328
£29.95 (£35.94 inc VAT)
OEM: 68-8328, 83-1387, 83-3331
BSA Oil Tank Filter - A50 and A65 Circa 1962-70 + Early B44 Models - Pre 1967 Threaded gauze oil filter plug - correct fitment on A50 and A65 models +...
+

seal351-B7
£9.95 (£11.94 inc VAT)
OEM: 90-0749, 90-0147, 89-3006, 86-8769
Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71 Suitable for three or four speed D10 and D14 Bantam models. Kit...
+

g/box3396-G15
£27.95 (£33.54 inc VAT)
OEM: 65-3396
BSA Speedometer Driven Gear Bush - A7 / A10 Models Circa 1960-62 + Early A50 / A65 Models Speedo driven gear with recess for rubber sealing washer -...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

seal0243
£1.95 (£2.34 inc VAT)
OEM: 40-0243, 70-3833, E3833
BSA/Triumph Clutch Back Plate Oil Seal - Unit Singles Circa 1959-72 Clutch / primary case backing plate oil seal. Suitable for C15, C25, B25, B40, B44,...
+

plate4016B-B13
£3.95 (£4.74 inc VAT)
OEM: 70-4016, E4016
Triumph Brass Timing Cover Patent Plate - Pre Unit and Unit Twins - Circa 1959-85 Brass and black timing cover triangular name plate for all pre unit and...
+

pumpgkt735
£1.00 (£1.20 inc VAT)
AJS Matchless Oil Pump Gasket Single cylinder models
+

bolt206-B19
£4.45 (£5.34 inc VAT)
OEM: 21-2206
Triumph 650cc and 750cc Twin - Cylinder Head Bolt 3/5" UNF OEM: 21-2206
+

cap004-B4
£6.95 (£8.34 inc VAT)
OEM: 01-4457
AJS/Matchless Primary Chaincase Inspection Cap Suitable for AJS/Matchless Models with the Pressed Steel Chaincase Screw in fixing and bar under the cap...
+

nut0152-B14
£3.45 (£4.14 inc VAT)
OEM: 15-0152, 15-152, NM16187, 06-7664
7/16" x 20 TPI Nut  - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM:  15-0152, 15-152, NM16187, 06-7664
+

shim0661-B18
£3.45 (£4.14 inc VAT)
OEM: 66-0661, 66-661
BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

oilseal1242
£2.95 (£3.54 inc VAT)
OEM: 67-1242
BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57 Chaincase / gearbox mainshaft oil seal - correct fitment on...
+

plate2909-B13
£5.95 (£7.14 inc VAT)
OEM: 70-2909, E2909
Triumph Patent Plate - 650 Twin Models Brass timing cover triangular name plate for 6T, T120 and TR6 models. Embossed with: Triumph 650 TWIN, MADE UNDER...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.