.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Oil Seals

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

seal3168
£0.45 (£0.54 inc VAT)
OEM: 68-3168, 57-2697, T2697
O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA/Triumph models including drain plug seal on some...
+

seal0289
£0.45 (£0.54 inc VAT)
OEM: 06-2583, 40-0148, 68-0289, 40-148, 68-289
O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA and Norton models including: Oil pump feed gear -...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

seal3761
£0.75 (£0.90 inc VAT)
OEM: 37-3761, W3761
O Ring - Nitrile Seal - ID: 7/6", OD: 1/2" - Various Applications ID: 7/6" (10.8mm) OD: 1/2" (12.4mm) OEM: 37-3761, W3761
+

wash2594-B13
£0.75 (£0.90 inc VAT)
OEM: 70-2594, E2594
Triumph Rocker Spindle Thrust Washer - T20 Tiger Cub OD: 5/8" (15.8mm) ID: 3/8" (9.8mm) Thickness: 1/32" (0.8mm) OEM: 70-2594, E2594
+

oring727H
£0.95 (£1.14 inc VAT)
OEM: 60-3548, 70-3253, E3253
Rocker spindle O Ring for Triumph 200, 350, 500, 650 and 750cc models This o-ring is the little sucker that you replace to stop that oil leak from the...

washer1335
£0.95 (£1.14 inc VAT)
OEM: 70-1335, E1335, 40-0159, 40-159
Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug Also used for the T140 oil in frame sump washer. OEM: 70-1335, E1335,  40-0159,...
+

seal3616
£0.95 (£1.14 inc VAT)
OEM: 60-3616, D3616
Triumph/BSA Oil Filler Cap O Ring - Unit Models from 1971-83 O Ring Seal to fit oil filler cap on Triumph/BSA OIF models from 1971 on OD: 1+1/4" (32mm)...
+

seal2640
£1.00 (£1.20 inc VAT)
OEM: 60-2640, D2640
O RING - Triumph Gear Shaft - 60-2640 Fits in the primary chain case, for the gearshaft hole. OEM: 60-2640, D2640
+

seal087
£1.25 (£1.50 inc VAT)
OEM: 71-1070
O RING - BSA and Triumph BSA, Triumph Rocket 3, Trident (cap seal) OEM: 71-1070
+

engine836-B18
£1.75 (£2.10 inc VAT)
OEM: 70-4569
Triumph Contact point Circlip - 70-4569 Circlip for Contact point seal. Fits Triumph 650cc and 750cc models. OEM: 70-4569
+

seal136-C13
£1.95 (£2.34 inc VAT)
OEM: 70-3876
OIL SEAL - Triumph Crankshaft D/S Oil seal for Triumph 3TA/5TA/T90/T100 (1957-72), T120/TR6 (1963-70). OEM: 70-3876
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

seal289
£1.95 (£2.34 inc VAT)
OEM: 40-0679, 70-8153, E8153
BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...
+

wash1031-B18
£1.95 (£2.34 inc VAT)
OEM: 57-1031, T1031
Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...
+

seal0243
£1.95 (£2.34 inc VAT)
OEM: 40-0243, 70-3833, E3833
BSA/Triumph Clutch Back Plate Oil Seal - Unit Singles Circa 1959-72 Clutch / primary case backing plate oil seal. Suitable for C15, C25, B25, B40, B44,...
+

seal3379
£1.95 (£2.34 inc VAT)
OEM: 70-3379, E3379
Triumph T20 Tiger Cub Crankshaft Main Bearing Drive Side Oil Seal - All Models Drive side main bearing oil seal as used on all T15 Terrier and  T20...
+

seal248
£2.25 (£2.70 inc VAT)
OEM: 60-3500, 70-3833, E3833
CLUTCH OIL SEAL - Triumph - for the clutch back plate Clutch back plate Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-67), High gear inner and...
+

seal137-E-C13
£2.25 (£2.70 inc VAT)
OEM: 97-1168, H1168
Triumph Engine Oil Seal - Triumph Pre Unit Twins - Circa 1957-62 Crankshaft drive side oil seal. Also fits Tiger Cub T20 final drive. OD: 1+5/8"...
+

seal255
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+

wash1381-B23
£2.45 (£2.94 inc VAT)
OEM: 57-1381, 57-1556, T1381, T1556
Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards Oil sealing washer, locates within the inner chaincase behind the retaining...
+

oilseal0147
£2.45 (£2.94 inc VAT)
OEM: 90-0147, 90-147
BSA Bantam Crankshaft Alternator Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Alternator side oil seal on D1, D3, D5, D7, D10, D14 and...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.